Limited Edition (Green Laminate) Avenger Review / Air Venturi Special Edition Avenger PCP Rifle

Air Venturi has released a new Limited Edition Avenger featuring a beautiful Green Mountian Camo Laminate stock. In this video we will give you an up close look at this Special Edition rifle as well as test the accuracy and demonstrate how to tune the rifle for the best accuracy using any weight of airgun pellet or slug.
The Limited Edition Air Venturi Avenger in Green Laminate is available at Pyramyd Air by clicking here: www.pyramydair...
You can also buy just the Green Laminate Stock for your Avenger by clicking here: www.pyramydair...
Avenger-X regulator: ???
DonnyFL 1/2 UNF adapter for your Moderator: www.pyramydair...
Thanks for watching! -Nate

[@AirgunChannel]

Thanks for the info in tuning!

[@AIRGUNZ_MILITIA]

yes thank you, i am getting a squatch green custom avenger .25cal next week , and i am told it is between kelly and hunter green and is alot like this green laminate except everything but my rails and side leaver are green even the end cap and foster fitting cap. and my side leaver is gonna be blood orange. i have only listened to you use a .22 avenger, but i only use the .25cals, had a bulpup but gifted it to a person without an airgun at all to get this rifle version. i am told the tunes are different on the two calibers. if you need any .25cal tunes i have some good ones. the alst word @airgunz_militia you tube

[@williamwilson2624]

That is a beautiful stock. I love it when you shoot those random figurines. I have always liked shooting random items. Great review, as always.

[@AirgunChannel]

Thanks for watching! More on the way!

[@beanaddict]

Im gonna have to stop watching you Nate,your having so much fun reveiwing these great air rifles,love the target shooting.

[@AirgunChannel]

Thank you, yes it can be an expensive hobby especially if you watch this channel. They just need to stop coming out with new guns every week.

[@wheelman717]

Crazy accurate and beautiful

[@AirgunChannel]

And affordable. Thanks for watching!

[@eddiecahall3824]

Very good review here. Only thing I would have to pick on this is power adjusting. Really supposed to do it by the regulator mostly and with the chrony. I would suggest someone turn the hammer way down and start there and turn the regulator down for less power and up for more. Messing with the hammer will wear it faster and also it makes the triggers on these harder to pull if you turn up the hammer. It's basically an adjustment needed only when there's noticeable wear after shooting it like you said 3000 shots or more. Hey nice shooting fun time! Ed Snippin Man here! Sta slingin that sweet air rifle lead 💥💥💥💪💪💪😱😱😱💯

[@AirgunChannel]

Thanks for the info on tuning !

[@Rogerwayne96]

@@AirgunChannel hello Sir trying to contact you for some time Now

[@AIRGUNZ_MILITIA]

and on an avenger te hammerspring , you can feel where the spring starts during the turn if you micro turn it and at that spot at every turn it makes the airgun calmer to be set at the point the spring starts its coil.

[@kingfishphill4120]

Sweet looking pcp and accurate Great review Nate

[@AirgunChannel]

Thank you! That is a nice PCP, especially for $400

[@kingfishphill4120]

@@AirgunChannel 👍😎👍

[@gonzalochacon2561]

With the DonnyFL Fatboy,tube extender and the muzzle brake she's quiet and extremely accurate, shorting icicles at 80 yards in Oregun!

[@airguns_rc]

Good video Nate. I have the Avenge X .25 caliber with the cylinder in the classic wood stock. Very accurate airgun.

[@timmy4539]

Keep an eye on your hammer spring ! I hear they are bad

[@airguns_rc]

@@timmy4539 no issues with mine or my friends. I’ll keep an eye on it though. Did you hear that from the guy on the All About Airguns Channel?

[@timmy4539]

@@airguns_rc yes and I know a guy that his hammer spring snapped off on him . His gun is only 2 month's old

[@airguns_rc]

@@timmy4539I will keep a close eye on it and let my buddy know as well. It’s not my primary airgun, so it doesn’t get used every time I shoot. Thanks for looking out.

[@FarmerFpv]

I have the Avenger Woodstock and the Avenger X Woodstock. My original Avenger with the AE Swede Oversized plenum, carbon fiber shroud, Optimized trigger and sear tuner, Bottle adapter with carbon bottle, and the threaded shroud adapter shoots lights out and Griffin slugs at 1020 fps. I hope we can get the same upgrades for the Avenger X otherwise I'm going to be bummed that my original Avenger shoots so much better. You can turn the Avenger into a subMOA gon at 100= yards. I hope Avenge X gets the same treatment. Though I doubt it as the hype isn't there like the original. I really hope so though. I really like it when you blast random toys' heads off. Cracks me the hell up all the time. Especially the slow-mo sound effect. That hits my funny bone. 😂😂😂😂

[@heathhalfhill6401]

Still the best bang for the buck. Not going for the Aveng X but getting another .22 Avenger wood stock. It will do the same as most other PCPs at 75 yards which is about as far as I shoot with a .22 cal and pellets. If I need to go farther out then the .25 cal LCS is coming out and 70 FPE will take care of the rest. Cool stock on that gun. Nice shooting N8.

[@garrettgallant177]

I keep meaning to ask you for a link to where we could buy one of those cleaning snakes you use!

[@AirgunChannel]

That is called the JL Crown saver but you can't get them anymore. You can get what's called a patchworm.

[@chriswedgworth]

Hey Nate I just won this on Air Gun Depot Should be delivered on Monday

[@AirgunChannel]

Holy crap! So lucky !!!!

[@stevengoodman3498]

Great one Nate! Love that laminate stock for sure. Same old reliably accurate air rifle we have come to love. I won't be getting an Avenge X as the original is awesome as it is. Mines in 25 cal and i have installed a .5L carbon fiber bottle for about 70 shots. Besides the reg creep it's the best rifle i own. I'm going to shop at Pyramid and get the new stainless regulator you mentioned as it's the only thing that needs to be changed on the rifle for around $65.00. thanks man and have a great weekend!😊

[@AirgunChannel]

Sounds great! I couldn't find the new regs for sale but they said they would be available, you may have to call them.

[@prophy4736]

might i ask where you bought the bottle?

[@stevengoodman3498]

@@prophy4736 Amazon

[@stevengoodman3498]

@@AirgunChannel yeah the reg creep is terrible on this one. I was hoping the new stainless ones would be more stable. Thanks!

[@scinner28]

what is reg creep ?i hear it allot but i am n00b .i just shoot air rifle's out of the box (i have not a single air rifle i can tune ) effecto zeon is my main airgun ..but i cant tune this rifle etc ..but when it is really cold it behave diffrent then when it is 20+ C ..

[@eddiecahall3824]

Also same gun with the regular old beech stock as this pretty model. The beech one is cheaper and budget friendly same accuracy. If someone want to know that.

[@AirgunChannel]

Yeah, these are a great deal!

[@todddavidmoore]

I wish that laminate stock was an option for the Avenge X.

[@ironhead320]

This is nice I seen it after I bought my air venturi .25 this came out a week later.Where you get those binoculars at.

[@AirgunChannel]

The range finder is a Halo XL450 for $89. They probably have them on ebay and Amazon

[@LHB33]

I'm still going to have to go with the JTS Airacuda. 22 but the Avenger would be number 2 as far as best bang for the buck.

[@gonzalochacon2561]

Thanks Nate, this is a beauty i got mine in .25 with 33 grain FX and brother, like you said once they go to the twilight zone at least 6 in a row, thanks again buddy for your reviews and awesomeness, where is buggsbuu?

[@AIRGUNZ_MILITIA]

flannigan's k1 47gr superhollowpoints here , they are slugs, but you can shoot them backwards like pellets wadcutters or forwards like hollowpoints, and either way they are accurate, course a bit slower being so heavy , but also more energy too.mine were flying at a bit over 700 fps with 2680psi on reg and between 4.5 and 5.75 turns on the hammerspring. but a little bark, i used a monocore vented baffles and bought two, drilled one out to 1/2" and slid it onto the barrel and put the other in in place of the stock baffle thing and it is very quiet without any extra length. smiles bit of felt between the two baffles. and mmaybe a inch wide felt wrap around the barrel behind the barrel spacer. and the bark is gone.

[@scinner28]

Very nice gun ..the hades are no good in this rifle ?

[@AirgunChannel]

They did not shoot very well out of mind.

[@mortezamalekian3492]

🔥🔥🔥

[@AirgunChannel]

I agree!

[@terrywells3955]

Awesome will it shoot slugs .?

[@AirgunChannel]

Yes. If you turn it up. JSB knockouts are 25.4gr

[@Steve-p1u]

Waiting for the grey colored ones to come out.

[@sniperdovoo]

Linda PCP meu amigo

[@rickbaker5972]

At Castleton when you get to town besides the wooden soldier

[@abdulhaq150]

I also have this airgun

[@AirgunChannel]

Lucky!

[@yalieangami6233]

Just..Aiwaa 💕👍

[@hendrickotto103]

Wonder what causes it to jump that vehemently on the shot ?

[@AirgunChannel]

If you're talking about the fps. Usually you have to break a regulator in a little bit.

[@hendrickotto103]

the gun itself does not stay on taget, but it very much strays FROM target, don't you agree ?@@AirgunChannel

[@penguinclips9551]

Wish we could get that in uk

[@mel376-6.2]

What air compressor do you use. Mainly for Huben GK1.

[@AirgunChannel]

I use a Lil foot or yong heng

[@marlonmorais71]

Who sells these in the UK? Can't find a single dealer.

[@AirgunChannel]

Krale should...or email me at [e-mail] I can definitely send you the stock by itself.

[@tommanning7337]

🤘🏻😎🤘🏻 nice

[@AirgunChannel]

Gotta love that laminate! I wish it was an avenge x though.

[@abdulhaq150]

Sir JSb what should be the fps for eighteen green and how often should the regulator be set

[@AirgunChannel]

The regulator can just stay where it is. Only the hammer Spring tension Needs to be adjusted. All pellets like to fly 890 feet per second. The 18 grain included.

[@ainguyen-mt1it]

Nếu cây này về Việt Nam thì bao nhiêu bạn...!

[@AirgunChannel]

Hello from the USA. these are $400 USD

[@donwilson350]

Do you know anytime I ever see a gun and they send you a rebuild kit that's a bad sign in my opinion if the gun was made real well you shouldn't have a rebuilt kit with it

[@AirgunChannel]

When the leak comes down to a $2 o-ring it's better than sending it in.

[@faiyazmakrani1844]

Awelebel

[@faiyazmakrani1844]

Price&adres

[@AirgunChannel]

in description.

[@Leadslinger619]

Stalk made out of a bunch of old skateboard ply 😂 very cool! Nice rifle!