Lincoln 140 Weld Pak setup and review.

  Рет қаралды 167,513

RICK BORK

RICK BORK

Күн бұрын

Пікірлер: 166
@DK-jh8fc
@DK-jh8fc 5 жыл бұрын
Just bought the same unit today, just happened to run across this video on setting it up, Awesome, what a time savor. Thank you for your knowledge.
@RickBork
@RickBork 5 жыл бұрын
Thanks for the kind words much appreciate you watching.
@vgarciajr20
@vgarciajr20 4 жыл бұрын
I just bought it today and this setup was of great help..thank you..what setting did you put your argon at?
@diazedvin04
@diazedvin04 5 ай бұрын
@@RickBork does it uses 110v or 220?
@lakearea296
@lakearea296 4 жыл бұрын
You're right about the clamp going to the positive until you start welding with gas, then the poles reverse.
@Adrianz456
@Adrianz456 3 жыл бұрын
Just found about that today!
@Eddie.7286
@Eddie.7286 2 жыл бұрын
Yup I noticed that also he’s backwards
@econ9028
@econ9028 3 жыл бұрын
aww yes, as soon as i saw that first spark, instantly brought back memories of my days laying down dimes :)
@NKadi2
@NKadi2 2 жыл бұрын
Very helpful video, thank you for taking the time to share it.
@dominickdeflorio193
@dominickdeflorio193 Ай бұрын
Nicely done. You answered all my questions. By the way, I experienced your "baldness" revelation many years ago. Your note made me laugh!
@user-lf7en6rf8m
@user-lf7en6rf8m Жыл бұрын
Exactly the kind of stuff I do at home, same welder just havnt been using it lol, thank you
@pcburcham
@pcburcham Жыл бұрын
Nicely done. Thanks for taking the time to do it.
@mannyu6689
@mannyu6689 3 жыл бұрын
I barely got this machine I’m pretty nervous I’ll try it next week your video was very helpfull
@NorthEastMaker
@NorthEastMaker 4 жыл бұрын
I just picked up this same welder new in the box for 400 bucks !! Going to get the gas bottle for it today.
@RickBork
@RickBork 4 жыл бұрын
Good deal. You will like that welder I've put a lot of hours on it and its performed very well. Thanks for stopping by. Have a great day.
@NorthEastMaker
@NorthEastMaker 4 жыл бұрын
Rick Bork even came with the 60 dollar auto sim Lincoln helmet too !! I can’t wait to fire it up. Great channel too. You have earned a new sub from this guy from New England !! Thanks again for the great review.
@RickBork
@RickBork 4 жыл бұрын
Auto helmets are nice spend many years with the old style now I cant go back. One thing I would recommend is being a little high on the argon pressure I've found you'll get better results with this welder. Thanks again have a good one 🍻
@NorthEastMaker
@NorthEastMaker 4 жыл бұрын
@@RickBork Awesome, thanks for the heads up !! I will be following your setup video and settings. I will let you know on my results.
@garyboardwine3349
@garyboardwine3349 2 жыл бұрын
Good review, forgot to mention that the feed wheel has different grooves for different size wire, and the usual mix is carbon dioxide, 25 argon, again nice review
@garyboardwine3349
@garyboardwine3349 2 жыл бұрын
75 percent co2 25 percent argon
@markboza6215
@markboza6215 5 жыл бұрын
Hey rick thanks for video, just bought the same welder today and you saved me time on set up, one thing you forgot to share the wire feed and amp settings ??.
@chitownbangin
@chitownbangin 2 жыл бұрын
Nice straight forward video. Hard to find in the days of the disabled 'dislike-button' lol. Thanks!
@johnyalmendarez8200
@johnyalmendarez8200 3 жыл бұрын
Thanks for your video
@bahunny
@bahunny 5 жыл бұрын
I like a no B.S. review that comes across as an honest opinion. I subscribed in hopes of seeing more good, honest vids. Thanks😋
@dirtybusiness7452
@dirtybusiness7452 3 жыл бұрын
Nice..Great vid
@jerryfallier3585
@jerryfallier3585 9 ай бұрын
Great video thanks.
@michaelpatosa
@michaelpatosa 3 жыл бұрын
Excellent review, thanks for sharing!
@ReptarDoc
@ReptarDoc 3 жыл бұрын
Amazing step by step bro!
@dougwilliams44
@dougwilliams44 2 жыл бұрын
Yeah, the Gamma rays from any Arc weld will cause hair loss..lol. Great "Out of the Box" video! I'd mention when installing the WIRE, make sure the Feed Rollers are same guage size as wire. .030/.035 etc. Thanks!!
@westcoast_johnny
@westcoast_johnny 3 жыл бұрын
Thanks for the nice demonstration. 👍🏼
@Schneids15
@Schneids15 2 жыл бұрын
Rick thanks for the video! I just like you need a welder for regular use and need it to be versatile. Going to pick one of these up tomorrow for a good deal new in box and i’m excited to try it out . I’ll subscribe and keep up with your channel. Thanks again
@kellyhoneyfeloncdljourney
@kellyhoneyfeloncdljourney Жыл бұрын
Hello, can you recommend a size of generator to pair with the Weld Pak 180 DV?
@RickBork
@RickBork Жыл бұрын
I wouldn't go with anything under 8000 watt.
@kellyhoneyfeloncdljourney
@kellyhoneyfeloncdljourney Жыл бұрын
@@RickBork thank you
@robertalmanza9210
@robertalmanza9210 Жыл бұрын
Do you recommend using argon gas in conjunction with the Lincoln 140 welder?
@JoseRodriguez-yp2ss
@JoseRodriguez-yp2ss 4 жыл бұрын
Very good video thank you
@jackrodosta7971
@jackrodosta7971 Жыл бұрын
I'm fairly new to welding, but your setup for mig welding is different from the Lincoln 140 HD Weld Pak instructions. Your setup has the work lead or clamp connected to the (+) output stud, the instructions show the work lead or clamp connected to the (-) output stud for mig welding. The setup you used is for flux core welding, according to the instructions, please explain? It obviously works with either setup, is one better than the other?
@florestom4422
@florestom4422 5 жыл бұрын
Awesome video thank you very much
@spottiesbrand7401
@spottiesbrand7401 5 жыл бұрын
Great video straight to the point no extra BS. THANKS
@RickBork
@RickBork 5 жыл бұрын
Thanks for watching much appreciated.
@Fatamus
@Fatamus 4 жыл бұрын
New subscriber here... come by to see what all the fuss is about. I was minding my own business watching squanch253 and it was said you make a lot of loud noises in a language I might understand, "Highly Expletive"...😜 Nice video with great info
@sacus209
@sacus209 Жыл бұрын
I have the same similar setup that I the just bought recently used. I’m having issue with my weld where it don’t seem to want to give me that spark when welding and I was assuming it was my ground clamp due to old and rusted but I replaced with a new better ground clamp but it still welding red hot welding wire coming out the tip and not sparking like it should. I assuming it my ground cable or I’m not preparing my area of weld good enough. Im try to weld some exhaust pipe and it just won’t spark. Any ideas what causing this issue
@MrCunty79
@MrCunty79 2 жыл бұрын
Now you have two bald heads lol Great video! Very clear and easy to understand.
@ducchau3330
@ducchau3330 5 ай бұрын
can I used this machine without gas?
@jameydetter8629
@jameydetter8629 7 ай бұрын
So do u have have to you gas ?
@fernandourias9507
@fernandourias9507 2 жыл бұрын
Good job amigo
@user-hd1qx2bd1r
@user-hd1qx2bd1r 4 жыл бұрын
Good job!
@heavensent2you
@heavensent2you Жыл бұрын
Any link to where i can get the wire??
@pham7878
@pham7878 3 жыл бұрын
Hi bro! Can this machine welding aluminium well?
@RickBork
@RickBork 3 жыл бұрын
If you buy the aluminum welding kit for them you sure can. 👍🍻
@pham7878
@pham7878 3 жыл бұрын
@@RickBork today i bought this machine. Thanks from VietNam!
@was-justsaiyan9151
@was-justsaiyan9151 3 жыл бұрын
Do you need to use the wire spool guard on the 2 rolls of wire the machine came with ?
@tasosissaakidis8506
@tasosissaakidis8506 4 жыл бұрын
Very helpful video thank you very much. I just have one question. I have some frame rot on my truck. Thinking of welding in a couple of patches. Would this machine be ok to use? I think it would but I wanted to hear you opinion. I have a ford f150
@RickBork
@RickBork 4 жыл бұрын
Thanks for watch I much appreciate it. This machine with proper skill will work to do frame repair on an f150. This is a link to a video where I did frame repair on an f150 with this machine. kzbin.info/www/bejne/ZnqTm5mgr9eIoZI
@williamsantiago7303
@williamsantiago7303 2 жыл бұрын
"Holy shit I'm bald"🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 Dude, that weld looks awesome. I'm picking up that same machine tomorrow from Northern Tool. Thumbs up on the video bud. 👍
@GPColin
@GPColin 5 жыл бұрын
Hey Rick. Just a question. Have you ever weld using a generator. I have same machine like yours and I just got the HONDA EB2800 generator and I don't know if it can run this welder machine? Thanks.
@RickBork
@RickBork 5 жыл бұрын
I have used the 110 welder on the 3500 watt generator without much trouble I wasn't running to welder maxed out but it seemed to work fine. Thanks for the question I appreciate you taking the time to watch. Take care.
@alejandrorodriguez3106
@alejandrorodriguez3106 Жыл бұрын
What can gas use for this machine
@smarthomeupdatessmarthomeu6071
@smarthomeupdatessmarthomeu6071 2 жыл бұрын
what's in the gas container?
@myke_bota7590
@myke_bota7590 2 жыл бұрын
Did you change out the guide wheel to a .30 ?
@RickBork
@RickBork 2 жыл бұрын
No need to change the guide wheel just the tip. 👍🍻
@johnnygonzales3211
@johnnygonzales3211 5 жыл бұрын
I’m getting the 180Dual😜
@ItsJohnnyZero
@ItsJohnnyZero 2 жыл бұрын
Great video! What is the brand of folding work table your using, as it looks like a nice one?
@eduardohh6180
@eduardohh6180 4 жыл бұрын
Thanks for the video...what do you recomend argon, or co2 dioxide o carbide
@RickBork
@RickBork 3 жыл бұрын
Argon Co2 mix is what I run 👍
@JonSwaim
@JonSwaim 4 жыл бұрын
I think you’re backwards on mig welding on the hook up
@alfonsoyo2722
@alfonsoyo2722 3 ай бұрын
So i have to but the gas too when welding aluminum
@jesuscorona3842
@jesuscorona3842 3 жыл бұрын
Can u weld with out aragon gas just electric
@RickBork
@RickBork 3 жыл бұрын
With flux core wire not with the solid wire. 🍻
@jamesranger9193
@jamesranger9193 2 жыл бұрын
What is the argon pressure set at?
@RickBork
@RickBork 2 жыл бұрын
I run 18 to 25 depending if your working in the wind or the material your welding. Generally you can run 18 to 20 and it will work with most applications.👍🍻
@jeffreyking6016
@jeffreyking6016 5 жыл бұрын
You need to reverse your leads. The diagram indicates for your mig wire, the ground leads must go to the negative
@dylanblack9891
@dylanblack9891 4 жыл бұрын
Does the ground wire need to go to negative for flux too?
@alberts9086
@alberts9086 4 жыл бұрын
Dylan Black Flux is dc- so no, your ground is on positive and your stinger in negative.
@cajunfid
@cajunfid 5 жыл бұрын
Nice job!
@orafaball2162
@orafaball2162 4 жыл бұрын
HEY MAN! I need help how do you remove the wire puller? Because I'm trying to weld but the puller needs to be turned around. I've tried to spin it but it doesnt come off
@georgewilliams6328
@georgewilliams6328 4 жыл бұрын
Will it run off of a 110 as well as a 120 outlet
@RickBork
@RickBork 4 жыл бұрын
I has the standard 3 prong plug on it i believe it is rated for 120 volts but does not have the 120 volt card with the turned pin. Hopefully that makes sense. 🍻 have a great weekend.
@ignacioreyes986
@ignacioreyes986 4 жыл бұрын
Hi what cain to rolling wire you use you use 030 mig wire but im not see if you change the rolling wire to 030
@Ixpol-408
@Ixpol-408 4 жыл бұрын
I have that same question did you use the .035 side or did you use the .028 side or did you change the wire wheel ??
@seniorelectrician6831
@seniorelectrician6831 3 жыл бұрын
Great video, and honest review. looking for a good welder to start on. someone recommended the Klutch 140 welder, available at northern tool. cost is about half of the Lincoln or Hobart your thoughts on that welder?
@RickBork
@RickBork 3 жыл бұрын
No experience with the Klutch. I'm my experience with welders you get what you pay for. I would do some homework and read a lot of reviews before buying.
@seniorelectrician6831
@seniorelectrician6831 3 жыл бұрын
@@RickBork I do plan on it, that is why I am asking as you may have reviewed it also. thanks!
@mikeboone4425
@mikeboone4425 5 жыл бұрын
Rick just curious just how far away with a power cord can you with out loosing to much juice.
@RickBork
@RickBork 5 жыл бұрын
With a heavy gauge extension cord you can get 50 feet with out to much trouble. Thanks for stopping by have a great day.
@mikeboone4425
@mikeboone4425 5 жыл бұрын
@@RickBork thanks a bunch .
@Ruben901
@Ruben901 5 жыл бұрын
I got a 100' extension cord heavy duty and it worked fine for my 140 weld pak
@mikeboone4425
@mikeboone4425 5 жыл бұрын
@@Ruben901 Yup it does also got one and and it worked great .Thanks take care and stay safe. Mike
@Chaemings
@Chaemings 7 ай бұрын
How's the life of the welder now?
@nicholasjheinz7461
@nicholasjheinz7461 4 жыл бұрын
Where is you sleeves and welding cap? Safety first!
@RickBork
@RickBork 4 жыл бұрын
I admittedly have a bad habit of no sleeves or cap. Arc really gets ya. Thanks for watching 🍻
@MikeOxlong1120
@MikeOxlong1120 Жыл бұрын
Is he running with gas and pulling his weld
@doristrudel2419
@doristrudel2419 Жыл бұрын
Y am not able to run my wire thru it seems to get stuck around the handel every time what wrong with it
@gene2200
@gene2200 Жыл бұрын
Take the tip out, he should have
@ipodpancakes2874
@ipodpancakes2874 3 жыл бұрын
Hey Rick can we get an update on this welder a year later?
@RickBork
@RickBork 3 жыл бұрын
I will try to remember to do an update video the next time I use it. Stay tuned. 👍🍻
@ipodpancakes2874
@ipodpancakes2874 3 жыл бұрын
@@RickBork appreciate it I’m bout to go out and buy one i’m just curious how they hold up
@imbrandon16
@imbrandon16 3 жыл бұрын
How's it holding up? I got a miller multimatic 255 with all the goodies, but i want something like this for doing little work around town (on light shit obviously,) but I don't want to lug my miller around, that shit Weighs 250+ lbs loaded with wire, and plus with my cylinders it was over $5,500.00 it's just too much of a liability to drag around. I may get one of these, or i may buy a used Miller bobcat or something idk... tbh i don't really wanna stick weld everything, so i'll probably get one of these. but the bob cat would potentially save money, bc it's also it's own generator... decisions decisions haha.
@justinw523
@justinw523 4 жыл бұрын
RICK BORK I've seen two different Lincoln 140's, What's the difference in the Lincoln Weld Pak 140 HD and the *Lincoln Pro Mig 140*?? Are they the same or which one is better? Thanks
@nxtlightdesign7440
@nxtlightdesign7440 3 жыл бұрын
Are you pushing or pulling on this? I'm confused on which direction works better?
@kylehaidet1523
@kylehaidet1523 3 жыл бұрын
On solid wire... pushing, pulling, and straight up and down all have their own uses. I can’t remember exactly but changing angle gives your weld different characteristics such as reinforcement and strength. It also changes the shape of the outcome of your weld. Pushing gives a wider and more flat weld wile pulling gives a taller shape. Everything you do is equal when you go perpendicular with your angle. This is what I was told in school... it’s been a while tho say may not be perfectly correct word for word lol. When using any flux based welding you always pull however or else you get slag inclusions
@BigBoyNowYT
@BigBoyNowYT 3 жыл бұрын
With mig I always pull.
@brandonvidal3636
@brandonvidal3636 4 жыл бұрын
What is the diameter of the wire?
@RickBork
@RickBork 4 жыл бұрын
Wire diameter is .030 thanks for the question. Have a great day.
@FernandoRodriguez-gx1gq
@FernandoRodriguez-gx1gq 4 жыл бұрын
How long does that bottle last??
@davidvue6956
@davidvue6956 2 жыл бұрын
Great Content man! What wire size were you using?
@marcelorea1226
@marcelorea1226 4 жыл бұрын
Hi Rick , I just bought one welder like that , and kindly please tell me , Do I need the gas and the regulator???? Or do you have another video which can show me using only electric without the gas ??? Thank you very much Marcelo Rea
@thercentertainer1950
@thercentertainer1950 4 жыл бұрын
You will have to run flux cored wire. The gas isnts gasoline as your comment suggested. Its normally a 75 25 co2 argon mix.
@hoxha34
@hoxha34 5 жыл бұрын
Great video. did you use straight Argon or was it a mix with CO2. Also have you tried the flux core wire.
@RickBork
@RickBork 5 жыл бұрын
The argon is mixed with co2. I have used flux core wire but it is dirty lots of spatter and the welds are not as clean.
@RyanJohnson-dh2ey
@RyanJohnson-dh2ey 4 жыл бұрын
Is it acetaline or argon
@RickBork
@RickBork 4 жыл бұрын
That is argon and co2 mix.
@calvinhandley2373
@calvinhandley2373 4 жыл бұрын
RICK BORK glad to hear it, you were saying argon repeatedly and was hoping you meant C25
@chrisrandlett6055
@chrisrandlett6055 11 ай бұрын
The polarity wires are backward for gas...
@clipsentral9913
@clipsentral9913 4 жыл бұрын
do u need gas to run this one
@RickBork
@RickBork 4 жыл бұрын
You can run with or with out gas on this model you just have to switch to flux core wire to run without gas.
@clipsentral9913
@clipsentral9913 4 жыл бұрын
ok thank you
@apatchofheavenfarm2814
@apatchofheavenfarm2814 3 жыл бұрын
I had a lincoln 140 a while back
@elpequenoviajero1828
@elpequenoviajero1828 2 жыл бұрын
Aluminum??
@bradedwards916
@bradedwards916 5 жыл бұрын
Good info! Thanks. squat sent me over
@michaelanthony5335
@michaelanthony5335 4 жыл бұрын
Nice unit, I probably would go with a 220 for frame repairs. Been looking at this unit to do projects around the house
@shaneholst6940
@shaneholst6940 5 жыл бұрын
Hay Rick I have had better luck when the liner gits a little age it when you feed wire though it is to take your tip off the gun . I've had good luck with doing it that way and it gives you a chance to inspect your tip and shielding nozzle!👍
@shaneholst6940
@shaneholst6940 5 жыл бұрын
Very good how to set up demonstration of a new welder!👍👍😁
@luvs2race370
@luvs2race370 4 жыл бұрын
Mig welding with gas requires electrode positive. Electrode negative for flux core
@darrenhanson5233
@darrenhanson5233 5 жыл бұрын
What was your wire speed at on the first weld?
@RickBork
@RickBork 5 жыл бұрын
I start with the wire speed between 4 and 5 fine tuning the wire speed from there. Thanks for the question. Merry Christmas. Have a great day.
@darrenhanson5233
@darrenhanson5233 5 жыл бұрын
Thank you merry Christmas an a happy new year.
@wolfsfabrication
@wolfsfabrication 2 жыл бұрын
My co2 won’t travel through my gun. It just shoots out where the tenting clamp is
@RickBork
@RickBork 2 жыл бұрын
You must have a break or restriction in the gas line.
@wolfsfabrication
@wolfsfabrication 2 жыл бұрын
@@RickBork is there a way to fix this?
@wolfsfabrication
@wolfsfabrication 2 жыл бұрын
@@RickBork I just didn’t have the end pushed in properly and all the way in 🤦🏻‍♂️🤦🏻‍♂️
@RickBork
@RickBork 2 жыл бұрын
Easy fix 👍
@garystoner9212
@garystoner9212 4 жыл бұрын
Why did you hook up the negative to the positive, when the intrusion have it hooked up the other way for mig
@RickBork
@RickBork 4 жыл бұрын
Technical error I my part was switched shortly after thanks for watch Gary I appreciate it.
@rubenvargas3547
@rubenvargas3547 3 жыл бұрын
Your polarity is all wrong for Meg welding, do you electrode should be positive
@waynekretchman1249
@waynekretchman1249 4 жыл бұрын
You never mentioned what the gas setting was at. Thinking thats why the regulator? but Need to know the pressure of argon gas? Thanks otherwise great video
@garrettjohnson1382
@garrettjohnson1382 4 жыл бұрын
30-40 cfh
@Mozzy_Stick01
@Mozzy_Stick01 4 жыл бұрын
mig is reverse polarity, only tig has a negative work lead
@ycffjvcffXfukhxxxxxC
@ycffjvcffXfukhxxxxxC Жыл бұрын
Por favor una pregunta , el conector de la antorcha cuántas puntas tiene???
@emeraldseablues
@emeraldseablues 4 жыл бұрын
Good vid except the polarity is kind of important isn't it? Good thing I watched the Lincoln vid since I just bought this haven't set it up yet. You also didn't talk about the drive roller since it can be changed around for different size wire.
@bobd.fletcherjr4912
@bobd.fletcherjr4912 2 жыл бұрын
👍👍👍👍👍👍👍
@CESARHERNANDEZ-li3mn
@CESARHERNANDEZ-li3mn 3 жыл бұрын
Cual es el precio
@roberthorn3587
@roberthorn3587 2 жыл бұрын
I DIDN'T EVEN NOTICE I WAS WATCHING THE WELD BEAD ETC!? I THOUGHT IT WAS YOUR HELMET!!!!!!!!!!!!!!!?????
@barbaramilo7632
@barbaramilo7632 4 жыл бұрын
Men start welding from rh to lh
@RickBork
@RickBork 4 жыл бұрын
Real men can weld from right to left, left to right, vertical, overhead, drag weld and push weld. Have a good day.
@garagekeys
@garagekeys 3 ай бұрын
220v is just a better machine, lot more welding capability for not a lot more money
@MarceloDeJesus-t7o
@MarceloDeJesus-t7o 5 ай бұрын
Run more smooth if you clean rusty metal , almost not spark
@Jesustheonlymediator
@Jesustheonlymediator Жыл бұрын
You’re wrong about the wire hook up. The feed is to the positive and the clamp goes to the negative. Look at your manuals!
@clipsentral9913
@clipsentral9913 4 жыл бұрын
so do u?
@RickBork
@RickBork 4 жыл бұрын
You can run the machine with or without gas depending how you configure the machine for gas or flux core. The way I set it up yes you need gas
@edwarddesouter724
@edwarddesouter724 4 жыл бұрын
Forgot to show the settings you had it on
@NewsNowFortWorth
@NewsNowFortWorth 5 жыл бұрын
how much ?
@RickBork
@RickBork 5 жыл бұрын
I believe it was about 500 buck with tax and everything. Been a bit but I think it was right in there. Thanks for the question. Have a great day.
@350mack
@350mack 4 жыл бұрын
$499 home depot right now
@edwardarbelaez8177
@edwardarbelaez8177 Жыл бұрын
Everyone's told you already you got. Your leads reversed for your showed gas.
@bjhachannel6747
@bjhachannel6747 4 жыл бұрын
i been watching the man video he tell peoples switch negative cable to positive cable i don't know he right or wrong so dangerous don't know who right who wrong but so dangerous i don't know who i can trusts
@RickBork
@RickBork 4 жыл бұрын
It is actually quite common depending on the application to reverse to polarity of the welder. The principal is the same using electricity to weld but the direction the current is flowing makes a difference in the quality of the weld. Hope that makes sense.
@thercentertainer1950
@thercentertainer1950 4 жыл бұрын
Reversing polarity is not at all dangerous. On many flux, or gasless processes, you would have the polarity dc electrode negative. This means that the wire feed is negative, or the stick in some cases. DCEN gives more heat that DCEP, or dc electrode positive. 2/3 of heat goes through ground making it ideal for digging processes sutch as fcaw or smaw, but inideal for the process in the vid, gmaw, using gas.
@Mannshtt
@Mannshtt 2 ай бұрын
Clamp is negative. Flux core needs DC negative which is clamp to positive and whip to negative. That’s reverse polarity. When using gas you run the whip to positive and the ground clamp (negative) to the negative post. Nice video otherwise.
Lincoln Electric MIG Pak Welder 140 Review
18:13
Andrew W
Рет қаралды 374 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
Hard nucleolus cutting process
0:04
CraftsmanSpectacle
Рет қаралды 107 М.
My New Lincoln 140 MP Welder!
17:58
jtmoffroad
Рет қаралды 70 М.
Tech Tips: Getting Started as a Beginner or Home Welder
21:42
Lincoln Electric
Рет қаралды 476 М.
RuffStuff Specialties Setting Up the POWER MIG 140 MP
14:44
Lincoln Electric
Рет қаралды 35 М.
Dialing In Your MIG Welder - Part 1
14:35
WeldFever
Рет қаралды 733 М.
Tech Tip: SP-140T Troubleshooting
8:19
Lincoln Electric
Рет қаралды 254 М.
How NOT TO Weld: Most Common MIG Welding Mistakes
16:44
Weld.com
Рет қаралды 9 МЛН
Lincoln 140 / 180 Welder TEST & REVIEW
5:05
DIY PRO
Рет қаралды 74 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН