Lindsay AirGraver® cutting compared to spring/pulse engravers

[@crystalbee7654]

i just bought one from you and already love it. thank you steve.

[@trevoradams8675]

Absolutely love mine. Wouldn't go any other way now.

[@SansP3ur]

I've sold off two of my kids with a buyer looking at the third. Once the last deal is locked down, I'm putting in an order for one of these. :D Seriously though, that looks to be a damn nice tool and worth every penny.

[@usmcretired2112]

LOL...

[@Zorgens]

I don't engrave, and maybe won't do in the future either. I don't know how I ended up here in the first place.? I find this video facinating as hell. That last engraver is a cool looking 'thing'. I want one.! To store on the shelf above my fireplace :-)

[@markcooper9063]

I have owned two other" engraving machines"I used them for years now I have a lindsay classic palm control it was a great investment

[@stevemorrison1080]

Thank you so much Steve! This is the information I've been searching for. Recently I bought an old IM3 animal dental compressor which may be ok for your cool style of handpiece. From another Steve . (I've been a jeweller over 40 years but I've only done push engraving)

[@calebwhiteknives]

Just bought my first hand piece/setup: BenchJewel Artgraver….and I am pumped!!!

[@DiaaDumar]

Mr. Steve ,this hand piece is one of my dreams and it's # 1 on the list ,very soon i'll buy it, Good luck for you and all your products all are high quality and very useful . Thanks again for the video. Diaa

[@Lightning-Man-1954]

Hi. Did you buy one from Steve.

[@57WillysCJ]

Reminds me of the palm gravers I used in the past. Price is not cheap but I believe I could use with my debilitating arthritic hands. Something I haven't been able to do in years.

[@classicuniquegifts9704]

57WillysCJ so correct me if I'm wrong but cobolt is used for cutting stainless steel and carbide is not? I'm having trouble with my carbide on stainless. Brass and aluminum is not an issue.

[@57WillysCJ]

@@classicuniquegifts9704 Never engraved stainless steel by hand. Of course the industrial pantograph should do the job. It is hard depending on the material. There are different types of stainless steel based on their machinability. You have to paint it with something or it will corrode quickly. Stainless is used in the food industry because it doesn't corroded easily but lower quality, which is easier to work, will once the polished surface is broken.

[@repalmore]

This is the video that convinced me that I'm better off spending a little more money and get a Lindsay product instead of a GRS style product. Couldn't afford the palm control but am very satisfied with the Artisan. No need to upgrade this tool for years to come. Gotta get much better to earn the value of the Palm control. Keep up the good work Steve.

[@jessesearls1389]

Hi Steve, that is really impressive. I think a nice fair comparison too..... Thanks for going to the effort. Jesse

[@EstablishedLowriders]

I have the Steven Lindsay classic with foot pedal and it’s been the best ever💯

[@LarryDallas]

I enjoyed the video it is AWESOME! It looks much better than the other style of engravers, thanks for sharing this video Steve.

[@brucebaldy]

Looks easier to control than die grinder for such work. I like it.

[@YourOldDog]

Beautiful tool. If it weren't so expensive I'd own one but I'm guessing you are charging more than its weight in gold minus the cutter. A more affordable price would sell them much quicker. Magnificent job in your design.

[@JohnSwampthingRae]

Quality doesn't come cheap.... You get what you pay for...

[@nerored6235]

@@JohnSwampthingRae true, but there comes a point where the price goes beyond the justification of quality and moves into just insane. You eventually reach a point where you can make just as much by selling in quantity than by just having a high price tag. It's called smart business.

[@JHV166]

@@nerored6235 NO, you're wrong. The Lindsay Engravers are so far advanced that it might take you 20 years to exploit every facet of the tool. Regardless, it will take a poor engraver to a fair engraver, a fair engraver to an adequate engraver, an adequate engraver to a good engraver, and a good engraver to a better engraver and a better engraver to a professional... How much is your career worth? If you 'dabble then buy a hammer and some gravers.

[@MacherlaPrabhakar]

Nice video, the tools are great

[@maximilianjankowski]

in this 11 minutes i understood that ,this is litelarly the rolls royce under the engravers , it goes throuth the steeel like a hot knive throuh cold butter wow just wow

[@brendamciver1320]

#Bamtalktime I have the Steve Linsay classic air graver tool and I love it, I was able to afford it much better than the GRS system

[@philipwatson3594]

hey steve that classic palm control went through that mild steel like a hot knife through butter seemed a better class than the others . very well engineered bit of kit great tutorial id better start saving as i need a palm control best wishes from durham uk ..

[@anselb2000]

Always amazing!

[@AbsoluteRecoil]

The materials and tooling doesn’t seem to add up to the price you are asking. Are we paying for the research?

[@WildStyleWorks]

there is even a third kind of gravers, the push/pull typ. that compressor works much simpler then the GRS system and the spring is on the other side of the hammerpiece. But it is not better then the GRS system, but also depending on the power of the pump used. the air powered hammers have the big advantage that you can just turn up the preassure and it goes. your video show very well the difference. In my opinion, even the sound they make is much smoother and. the power is no comparrison at all, no spring type will ever reach this level of power!

cool stuff. I'm just thinking about buying some equipment and getting started.

[@dillhole3852]

Mount your practice piece between the dowells on an angle ,not squared like you have it. Thus cuts down vibration.

[@brandysigmon9066]

I love my Lindsay classic, best 10,000 dimes I ever spent

[@littlesister3477]

Same with me, Got mine used with the foot pedal and air Regulator for a grand from a guy on the Engravers Forum, I haven't put it down since I got it,

[@77Avadon77]

Like others here... i'm very impressed with the tool and considering ordering asap.

[@vikneumann4148]

I am looking forward to getting my palmcontrol, and seeing what I will be able to do with it.

[@saifmuhaisen8122]

I'm very interesting How can I buy this full set ? And there is delivery to Saudi Arabia? Please

[@user-dh7wp5mk5z]

HOW CAN I GOT THE SAME DEVICE IS THERE SHIPPING TO SAUDI ARABIA PLEASE

[@roelfigueras4258]

Sr. Maravilloso!!

[@Milan22229]

i´d like the hear more about how the different types work like constant air flow or pulesed or 2 wayys

[@user-ll5os5gl2t]

kzbin.info/www/bejne/iqmQfHuVnbd0o9U

[@dorianmatthes9512]

Incredible.

[@TrojanHorse1959]

I went to your website, no offense intended, but what makes the engravers so expensive?

[@littlesister3477]

I understand where your coming from and I usually would be saying the same thing BUT, I have the 901, the Monarch from GRS, Great gravers no doubt, Sweet and Love em BUT, I got lucky recently and had a few extra bucks squirreled away for the time where I would get lucky and find someone selling a Lindsey Classic used on the Engravers Forum or Ebay ETC, I scored the Classic, Regulator and foot pedal all for a grand,I tried it out the second it arrived and I haven't put it down since, You need Mules tied to it to hold it back, Its covers every range just like Steve showed here , a spin of the collar and more power to you. I love the GRS stuff I have but for the foreseeable future Im using the classic , Its rare to find a used one at an affordable price but if you keep looking and have the money when it comes up grab it, It will be gone in an hour if you dont .

[@orange_luce7674]

hi can u plz recomend a set up or kit that can get me started cheap if u can i dont care about quality i just want everythng i need in one kit. to learn and get started i have about $1,000 to work with. thnx

[@DavePawson]

Very impressive, even compared to the other systems. Comfort in hand comparision?

[@bluemoon7378]

anyone know what vise that is please?

[@classicuniquegifts9704]

I wonder if the grs untit would power the tool being that its pulse?

[@healingjewellery]

Hello sir how much please tell me

[@yasingh9456]

HI Steve I just like to know those air gravers ( engraving machines ) and the tips you have sharpened , is it possible to use them for intaglio portrait engraving which has fine lines and details . Thank you

[@thomashvnmusic]

What type of graver is that? Is it on your website?

[@PalmControl]

Hi, It is a PalmControl. Look at set #2 and #3 at this link: PalmControl.com/help_and_options.htm

[@nerored6235]

Nice but insanely to high for my blood. Especially considering you could reduce some of the cost my worrying less about making them look fancy. But I'm assuming you're looking only at selling to the high end of the market anyway. Do you.

[@JOBAfunky]

Well I sure learned something. I thought they wanted you to buy the fancy handpeice and spend 1,200 on the supply as well.

[@knivesoutdoorsbytotoco.6114]

DO YOU HAVE A LINK WHERE TO BUY THESE TOOLS?

[@K.Knitting]

where I can found this, I mean from where I can bought it

[@MohamadMohamad-rp6le]

Nice

[@1life1love39]

Which Lindsay set up would I need to work on knives and car parts... I've gotten the scm power carver but I'm not getting the smooth lines I'd like...

[@charlesbleile5282]

The scm power carver is not an engraving tool. It is a high speed rotary grinder. You will never get the kind of clean bright cuts that a properly sharpened graver will give you. The Lindsay Classic will do the finest work on knife parts and with additional tungsten piston replacing the standard will work great on heavy deep cuts for car and motorcycle parts..

[@1life1love39]

Charles Bleile ... Thank you... I'll be placing my order soon...

[@fistpump5485]

@@1life1love39 palm control classic or foot control classic. both are perfect.

[@tarrasss1]

Where can I purchase the airgraver? Please.

[@charitha721]

Is it available in sri lanka..?

[@ahmadalmusawi4699]

Sehr schön bitte wie viel kostet diese Geräte

[@parfecthelp7964]

I was meking this at home .

[@syfulislam5288]

Hi,i want buy this.how much is it.diaa

[@shankhanzada1038]

I need this tools plzz sir in Pakistan

[@itzsparshsoney7931]

what's your work?

[@Mabrumas1]

Could you tell me where you bought the wooden handle? Excellent video Thank you

[@TGxANAHEiiMx]

Mabrumas1 www.airgraver.com

[@fistpump5485]

Steve hand makes the entire piece. handle and graver.

[@victormofenyi5048]

How much is the too sets?

[@bambangirawan6011]

Sangat bagus semuanya

[@NamBui-ot2ox]

how much is your pump parameter?

[@saulmendoza1278]

What’s the name of the machine?

[@OldSkoolF]

Who thinks Steve sounds like Jeff Goldblum???

[@pmichel2215]

J'aimerais beaucoup avoir des vidéos en français ce n'est pas évident si vous pouvez me donner des renseignements sur sujet là ce serait bien bonne journée

[@manoj89chokshi]

I want to buy this product, where it find.. please reply

[@TGxANAHEiiMx]

Manoj Chokshi www.airgraver.com

[@zeshanright3076]

Who good

[@andijvie3119]

I’m still using my manual “handgraver”

[@user-ll5os5gl2t]

kzbin.info/www/bejne/iqmQfHuVnbd0o9U

[@unessmega8917]

Hi i'm from Morocco how where can i buy these equepment ?

[@brandysigmon9066]

Airgraver.com is where you purchase these

[@kentrenshaw3265]

And the vise?

[@MultiChinony]

It awesome.. Can give me one.. 😊😊

[@sonysetiawan4916]

Berapa harga mesin ukirnya

[@joesTired]

Damn, I wish I had the money to purchase an AirGraver. I want to get into engraving as a hobby with a passion. My KZbin is loaded with tutorials and equipment reviews. I always buy the best equipment when I get into something no matter what the venture. The quality of your equipment is very important and with engraving it definitely seems to be the case as well. The AirGraver keeps coming back during my research as the best as far as I can tell. I haven't engraved a single line or second yet so obviously my knowledge is slim to none but it seems to be an awesome, American made piece of equipment. I don't know how long it'll take me to buy one but I'm fairly certain it's worth the wait. I just wish I had a friend that I could borrow a piece from just to get started! Does anyone know if there's a cheaper place to pick up an AirGraver? Maybe a used one? $2,000-$3,000 is a massive investment for me right now but I'm chomping at the bit to get started:-)

[@guismth]

Well.... im impressed with the tool. Not so much on the extortion price. It makes all the other gravers look like crap, granted. But $1200. For the base model? No compressor, graver tips, sharpener, foot pedal?.. oof..

[@Stallnig]

That much?! Guess I'll have to forget it then...

[@guismth]

Ive been saving my pennies. The tool looks amazing. Ill break down eventually.

[@classicuniquegifts9704]

The quality of the tools are worth the money. I purchased just a few bench stones and the universal sharpening set with the fixture just to see what's up and I was blown away! I can only imagine what those handpiece's are like!!

[@brandysigmon9066]

I own a Lindsay classic and it is, in my opinion, the very best you can get. Everyone complains about the price but if you are serious about engraving it is well worth the price. If you are an engraver that sells your work it pays for itself in no time. This tool will last a lifetime, if you ever have any problems with it Steve will stand behind his tools 100%. If you are serious about engraving or learning to engrave then you can't go wrong with the airgraver. Steve has many nice tools, they are all top quality, you get what you pay for.

[@fistpump5485]

his equipment is the Rolls Royce of the engraving world. You want the best, get Lindsay. If not, there is GRS.

[@dipakpaul9582]

shopping link

[@fistpump5485]

airgraver.com

[@ripondas6539]

Bro, do you sell it?

[@anoarmanezes5101]

como compro um equipamento deste como chama

[@antoniocnunes888]

no aliexpress é o qiue mais tem mas o ideal é saber o fornecedor desses modelos do video--nomes conhecidos handpieces Gravura Graver Max Hammer Handpiece Handpiece Handpiece Handpiece para Pneumática Máquina de Gravura Graver Ferramentas de Jóias Máquina

[@godhansoni1292]

Very very good work I want purchase this machine please contact me urgent request Hindi language

[@nhitue5954]

I cannot get keywords to list forums Please email and request the "keyword" to use here: lindsayengraving.com/mail.htm

[@fistpump5485]

airgraver.com

[@DucPhamtacolayo]

hi steve

[@Sanjay_sanjay_soni-2007]

Price sir please. ...

[@fistpump5485]

roughly 2600 for the palm control. about 1400 for the foot control set up which is what i use.

[@ImranKhan-mj3jw]

Sir how much is this

[@pawpatina]

HAHAHAHAHAHHAHA wow. new to the internet?

[@pawpatina]

AirGraver.com

[@marioworkshop]

Lidsay is todo expensive

[@isdylanchillin4310]

ah so it works like a steam engine.

[@annaarze603]

$3000 for the classic

[@fistpump5485]

2600. you wont ever need another graver and they dont loose their value. ever.