Line follower Robot using Arduino | IR sensor | L298n driver

#linefollower #robot #arduino
Business inquires
E-mail : [e-mail]
Connect With Skynet Robotics
Facebook: / skynetroboticspage
Instagram: / skynetrobotics
For Ready Made Electronics projects Message me on WhatsApp
[phone]
WARNING:
This video is for demonstration and education purpose only. Each demonstration presents risk and hazards that must be fully understood before attempting. And should be performed only by professionals.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
Code and Circuit Diagram:
drive.google.com/drive/folder...
hardware requirement:
1 X L298N or L298D motor driver
2 X IR sensors
1 X Arduino Uno
1 X Scissor/cutter
1 X Broad Black tape
1 X Double sided tape or glue gun
2 X 150-300 rpm DC geared motor
6 X F-F jumper
2 X li-ion 18650 Battery
1X 2S li-ion Battery holder
2 X Wheels
1 X caster wheel
10 X 3mm nutbolts
1 X screw driver
1 X chassis
In this video tutorial you can learn how to make a line follower robot without Arduino
line following robot is one of the favorite project in the field of robotics engineering.
in this arduino line following robot tutorial you can make line follower robot using arduino and line following robot without arduino.
We can make line following robot with obstacle avoidance. line following car and line follower robot working mechanism is same . simple line following robot can be buid without microcontroller.
arduino line following robot required code to be upload in Arduino.
This is award wining project in line follower robot competition.
line follower robot using microcontroller needs programming and fast line follower robot requires high quality sensor . arduino line following car video i have uploaded you can visit.
Playlist:
14 LEDs Chaser Light using Arduino | 30 effects | दिवाली Special decoration | Running light
• how to make led Chaser...
Blinking of LED by using Arduino | simple circuit | breadboard |220 Ω
• Blinking of LED by usi...
Servo motor Arduino connection | SG90 | micro servo
• Servo motor Arduino co...
Reading data from joystick
• Joystick Arduino || re...
Arduino LCD Joystick Game Project - How to make Arduino LCD Game
||Super Mario game
• Arduino LCD Joystick G...
Arduino distance measurement using Ultrasonic HC-SR04 Sensor
• Arduino distance measu...
What inside Hard Disk | हार्ड डिस्क काम कैसे करता हैं ? | Working of Hard Disk
• How hard disk drive wo...
How to Make Radar Using Ultrasonic Sensor Arduino | Arduino Radar project
• How to Make Radar Usin...
How to Connect DHT11 Temperature and Humidity Sensor to Arduino
• How to Connect DHT11 T...
Line follower robot without using Arduino || L298N motor driver line
follower robot
• Line follower robot wi...
Music Credit:
NCS (NoCopyrightSounds)
Music Track: Tobu - Infectious [NCS Release]
Music Track: • Video
Follow Tobu
▶ / tobuofficial
▶ / tobuofficial
▶ / 7obu
▶ / tobuofficial
▶ / 7obu :
:
Business inquires
E-mail : [e-mail]
#arduinoproject #engineering #howto #electronic #project #robotics

[@saravananmrf8177]

🎉It is really working 🎉 I will submit my project tomorrow😅😅

[@skynet-robotics]

All the best

[@saravananmrf8177]

@@skynet-robotics any projects in your chanel

[@wogariabdi922]

great work. i will try this project

[@skynet-robotics]

Thnx

[@ashanehe407]

Superb,👍🏻👍🏻👌👌💯

[@saravananmrf8177]

It was really working it was my first project please appreciate

[@subhavikakakad8050]

To good 👏👏👍👌👌

[@subhavikakakad8050]

To good 👏👏👏👍👌

[@afzalfaizy1865]

it worked. you saved me bro

[@maheshwarverma9806]

7:48 calibration step

[@afzalfaizy1865]

thanks

[@swagatadas7046]

circuit done, arduino code uploaded, now how to sense the sensors???? please reply...urgent

[@otmaneelyandouzi5593]

niiice

[@janaamr7821]

Black line isn’t detected even when I adjusted sensitivity please help he is moving anyways all the directions detecting all colors

[@HitoriTwice]

Bro can we use only 1 ir?

[@067_nandhini.p8]

What is the connection if we use ir sensor array instead of ir sensor

[@skynet-robotics]

Use extrem left and right sensor from array

[@nyxashvein1333]

Is there a way to adjust the motor wheel speed?

[@skynet-robotics]

Yes Connect enA and EnB pin to Arduino And insert state analogwrite(EnA, 150) ;

[@ELAVARASANP-yy7kl]

how to reduce the speed of the motor?

[@skynet-robotics]

We are not using Arduino so use less rpm motor

[@vishnus8571]

Can we use n20 gear motor instead of dc gear motor

[@skynet-robotics]

Yes

[@8l31melvinkrishna9]

My both motors are not working at same time ..i can only rotate one at a time ...why sir plizz reply

[@skynet-robotics]

Send video on WhatsApp or insta

[@pandeysisir4416]

what happened if we use the another type of arduino

[@skynet-robotics]

No problem U can use any arduino board

[@icecreamchillin7613]

Hello sir! kindly answer pls. why two motors works in different directions

[@skynet-robotics]

Swap wires of motor which is revesed

[@icecreamchillin7613]

​@@skynet-robotics done it already but it won't move :(

[@jarinakureshi2049]

Sir my robot is not follow line it's moving anywhere what to do please say something .....

[@skynet-robotics]

Have you adjusted sensitivity

[@clipclapclip3422]

Me to

[@hotnadog2317]

i can't open the code and circuit diagram on my phone

[@skynet-robotics]

It's opening Try it

[@KMG2011]

Can we use 9v battery

[@skynet-robotics]

Yes you can use

[@RahulKumar-qq2si]

avrdude: ser_open(): can't set com-state for "\\.\COM3" Failed uploading: uploading error: exit status 1 showing this error please help

[@skynet-robotics]

Remove usb,reconnect and try to upload try it many time

[@RahulKumar-qq2si]

@@skynet-robotics i did it too many times ... but don't know why it's popping the same error

[@RahulKumar-qq2si]

@@skynet-robotics can i text you personally? Like Instagram or telegram kyuki yaha pe WhatsApp dena sahi nahi rhega .

[@Tinkoplayz]

bro ir sensors aredetecting black wire but car motors cannot move help anyone

[@skynet-robotics]

Insert EnA and EnB jumpers

[@Wwastedlove]

sir it isnt working, the motor driver and arduino is glowing and the senskrs are adjusted whats the issue?

[@Wwastedlove]

the wheels arnt moving

[@Wwastedlove]

please reply urgently i have this project due on monday, wires are connected correctly

[@skynet-robotics]

Check EnA and EnB caps inserted

[@muhayandanajib4833]

"Could not create the sketch" when I open the code file

[@skynet-robotics]

Open with notepad Copy code and paste in Arduino IDE

[@jesfreesoriano9279]

The arduino needs to connect to the laptop to work why?

[@poisonda2mm614]

To program the audrino

[@SamOyor]

Sir the sensors are working but the motors isn't. Help what should we do to make it run or work😢

[@skynet-robotics]

Insert connector jumper to EnA and EnB pins

[@SamOyor]

Where do we insert that sir? We are just newbies when it comes to this 😓

[@AnkleDan]

HOLY SHIT, NO SOLDER>?!?!

[@skynet-robotics]

No

[@user-lv8hc5tw9d]

sir, bot not follow black line ,pleace reply

[@skynet-robotics]

Sensor adjust

[@ajeetparmar489]

Give me programming for this

[@lovecupid5647]

Please reply ....circuit is working but not the motors

[@skynet-robotics]

Kindly check jumpers are inserted into EnA and EnB pins

[@abdulhakimadnan1591]

@@skynet-robotics EnA and EnB must connected to where sir?

[@skynet-robotics]

@@abdulhakimadnan1591 connection diagram link given in the discrpition box Jumpers(small piece of plastic) shown in diagram which short two point

[@seemashakya286]

Sir if there isn't jumpur than what to do

[@sriram2c51]

The link is not working

[@skynet-robotics]

It's working. I hv checked

[@srijonroy930]

code missing. can you please send the code?

[@TechnoBotsJunction]

Bro Find In Discription

[@sriram2c51]

How to download code and upload in ardoino

[@skynet-robotics]

Link given in description box

[@roshan8463]

What type of coding

[@skynet-robotics]

Arduino

[@utkarshpandey6600]

Code is not running, so bad we connect and no code , Really 😭

[@skynet-robotics]

Have u inserted jumper in driver EnA, EnB pin

[@kotireddych9482]

Plz send me code link anna plz urgent😢😭😭

[@user-tp6hi5rj5f]

Untuk membuat total habis berapa

[@skynet-robotics]

1500/ INR

[@Arrow_and_Movies]

Arduino code kaha hai

[@skynet-robotics]

Description box main hain link hain code and circuit diagram

[@himanshudhiman4361]

Arduino code zip file that u mentioned in description box showing enter password to unlock 🔓zip file🙃!!?

[@skynet-robotics]

No there is no zip file may be you are opening other file

[@kiranKumar-R]

Bro Ir is sensing But motor is not running..

[@skynet-robotics]

Check EnA and EnB jumpers

[@kiranKumar-R]

EnA EnB is Blocked But Motor is not Running

[@kiranKumar-R]

plz Help me bro

[@skynet-robotics]

Which battery you are using

[@kiranKumar-R]

@@skynet-robotics 2000 mh 3 Lithium battery

[@oooommmmmgggg]

code can t open bro

[@skynet-robotics]

Download it and open with notepad

[@JonnaMaeTaytay]

Can i have the code

[@skynet-robotics]

Check description of video link given

[@-pd8ns]

My right motor is not working 😢

[@skynet-robotics]

Left is working?

[@-pd8ns]

Yeh I found the erro by bolt touch on wheel wheel can't move I solve it 😂❤️Thank you.

[@skynet-robotics]

@@-pd8ns 👍

[@kotireddych9482]

Plz send me code

[@kotireddych9482]

Plz

[@ratan_gamerz]

sir it is not working

[@skynet-robotics]

Insert EnA EnB jumpers

[@nathashameedun6529]

wtf with the code

[@kishoreSriram-kc7fn]

how to upload code

[@skynet-robotics]

Link given in the description

[@sammy5179]

everything works except the motors, help!

[@skynet-robotics]

Make sure you have inserted EnA and EnB jumpers

[@sammy5179]

@@skynet-robotics They are well inserted, is there a way to communicate and help me!? please

[@skynet-robotics]

@@sammy5179919075800409 WhatsApp

[@sammy5179]

@@skynet-robotics thank you! I communicate in the morning

[@sammy5179]

@@skynet-robotics I already sent you a message

[@afzalfaizy1865]

thanks