Linkswell Inc. Generation II Ram T-Style Installation Video

In this installation video we will show how to install our new Generation II T-Style radio into a 2018 Ram 2500.

[@MJTechChannel]

Hey there, I am the guy who made the video of the 1st gen. I would like to try this 2nd gen. Can you please message me? I have my email in the about page here on YT. Thanks

[@bamboobob4489]

Hi, where are you located?

[@LinksWellInc]

@@bamboobob4489 We are located in Riverside, Ca

[@eastwood2414]

Awesome video! I have that same stock radio and I hate it, so this will be a perfect replacement. 👍🏿

[@cjevans62]

Can you send a link for 2011 Laramie with 5 in screen , thx

[@joebarbosa641]

I bought this radio but now is makes my alpine sounds system sound like trash ... All my speakers sound blown and my subwoofers sound like they are cracking instead of hitting the bass .. Any help??

[@LinksWellInc]

Have you programmed the HVAC/CANBUS settings?

[@smoffen55]

Does this work if you have a 2014 1500 tradesman that does not have a center display? Mine only has the radio display? @

[@LinksWellInc]

So long as the dash is the same it will work. Dodge has a few radio options for this dash style. So as long as your dash style is the same it will work.

[@aymanalmadani4663]

I have the 2017 ram 1500 with Alpine sound system. After I connected the t style radio I only have sound output from 2 speakers only either the front or the back. How can I fix that? What did I miss?

[@LinksWellInc]

Ayman Almadani the Alpine system actually only has one set of inputs. So it takes the signal from the 2 speakers and then makes all the speakers play. The Alpine faded was done digitally through the factory radio which we can’t reproduce. So if you plug the HI plug in. You should have all 4 speakers playing, you just wouldn’t be able to use the fader. I hope that makes sense.

[@linhtruc9353]

hi i had 2018 ram 1500 hemi big horn so this screen can fix for my truck please let me know thanks

[@LinksWellInc]

Yes, it will fit in your truck.

[@stlopez17]

Don’t like the lack of colors on the screen

[@michaeldavis8819]

I have a 2017 1500 laramie has air ride heated/cooled seats auto wipers and high beams and other stuff my stock 8.4 unconnect radio controls will I lose all those controls

[@ArqRamonCelaya]

i BOUGHT THIS ABOUT A YEAR AGO FOR MY 2016 RAM, EVERYTHING CAME OK, BUT THE BIG CONNECTOR CAME LABELED FOR A FORD F-150. IS THERE ANY WAY THAT I CAN GET THE RIGHT ONE? I DONT MIND PAYING FOR IT, SINCE ITS BEEN MORE THAN A YEAR AND I DONT HAVE MY TICKET OR ANYTHING. I'M IN MEXICO.

[@LinksWellInc]

We don’t sell direct. But if you reach out to one of our dealers like www.adcmobile.com they should be able to get you fixed up.

[@ArqRamonCelaya]

@@LinksWellInc Thanks! I appreciate it!

[@moe3754]

I installed this in my 2013 Ram 3500 two months ago and it is a great radio I am so happy that I got rid of that garbage 8-inch screen. The people I purchased it from ADC Mobile has videos on here also and the owner gave me his cell phone number just in case I had problems installing it which took all of one hour. One thing that I did change is that I use Nova Launcher on mine because it is better launcher than the factory launcher. I highly recommend this and Walt at ADC Mobile. As for how it works, I tow a fifth wheel and still have all my settings that I need. If you see that little dimple on the right side of the radio there that is from using a drill driver DO NOT USE ONE OF THOSE or you will over tighten the screw and cause the dimple, use a regular screwdriver and do NOT over tighten the screws at all.

[@williamhillock3751]

Any ETA on systems for the 2019 5th gen ram 2500?

[@LinksWellInc]

William Hillock we have our first working test system that we are testing currently. So if the test go good we should have it available early next year.

[@rudyt4912]

Do you offer this type of screen for the 2005 Dodge Ram 1500 & is there a video ?

[@LinksWellInc]

We do not have one for the 05. Only thing we would have for an 05 would be a universal double din.

[@jjames5928]

Does it work with the factory air ride. I have an air ride menu in my factory 8.4

[@marksheard7676]

No. In fact it ruined my air suspension. Had to swap back. Not designed if you have factory air suspension .

[@raulrosales326]

i just installed it and my heated seats and steerin wheel dont work any ideas why they are not working?

[@LinksWellInc]

Did you turn them on in the settings on the radio? Also did you make sure the factory seat heater buttons are plugged in on the lower part often dash?

[@gregwun7145]

I have one of these systems and I cannot get their AC controls to work can you help

[@LinksWellInc]

Is it a GEN 2? Or a GEN 4?

[@Unfinished-Business24]

I just got the DVR camera for USB but not working anyone have any ideas did I do something wrong?

[@LinksWellInc]

Michael Burger which DVR?

[@Unfinished-Business24]

@@LinksWellInc I figured it out thank you anyway

[@davidbyse4642]

Where do I get the climate control adaptor? Mine didn't come with my unit

[@LinksWellInc]

Contact who ever you purchased the radio from.

[@l4dbros1518]

Can’t find a place that will let me buy through shipping!

[@LinksWellInc]

Try www.adcmobile.com

[@adansaavedra5831]

I just ordered unit thru Amazon. How do I know if I have an amplifier or not?

[@kenle3419]

NO DIRECT LINK TO PURCHASE

[@josue6.753]

I have a 2018 will I still keep my steering wheel and heated seats ?

[@LinksWellInc]

Yep.

[@MrAwesome00011]

If I plug in an iPhone will Apple CarPlay show up, or is there a way to get an addition of Apple CarPlay?

[@LinksWellInc]

MrAwesome00011 comes with it built in.

[@raulrosales326]

i just installed it and my heated seats and steerin wheel dont work any ideas why they are not working?

[@datphillyboi25]

How is the eq done if i chose to go aftermarket amps and sub

[@LinksWellInc]

The EQ is super basic. Just Bass Mid Treble. Generation 5 will have a 16 band EQ one of the feature upgrades we are working on.

[@chrisshep45]

Does this unit retain factory steering wheel control or do I need another part

[@LinksWellInc]

Our systems come with everything needed to install and retain the factory steering wheel controls. The only button we don't support is the voice control button because we do not have any voice controls built into our radio.

[@renzobenjumea4009]

I install everything as the video says. the microphone doesn't work for me. What can I do to fix this problem? my pickup is a 2016 dodge ram 1500

[@LinksWellInc]

Renzo Benjumea where do you have the yellow microphone plug plugged into? Where did you mouth the mic? And make sure the wire didn’t get pinched or cut where you ran it.

[@alexramirez4983]

Anyone figure out how to download Netflix?

[@LinksWellInc]

We have the NetFlix app on our website under Support/T-Style Applications.

[@chavezinsesser]

Does it have sub out?

[@cobysgarage3085]

You can’t retain your factory microphone? My truck is a 2018 2500 tradesman

[@LinksWellInc]

Whipskicksn40s Tv we can’t. Because all factory mics are not created equal we would have to build our systems with a bunch of different Bluetooth parts, varied by model and would drive costs up. It also makes quality control hard when you rely on parts that aren’t yours to test or build. Many of our customers though have installed the mic in the factory location making it appear factory.

[@tonyreynolds4878]

What would you recommend with it now being 2022 to use on my 2018 ram 2500 SLT? and the cost?

[@scottmccambley764]

Linkswell Gen V is out now with android v9.

[@danieltownsend1296]

Does the CAN interface come included with the unit? I want to keep the light/door/etc. control functions.

[@cesarherrera7509]

Anything similar for 2005 ram 1500

[@LinksWellInc]

Not the 05. We will be releasing a Double Din soon though you might be able to get in there.

[@13ktostay]

I need technical help with your px6 I was hoping you could help. I have a 2017 ram 1500 Laramie with auto A/C with alpine stereo and subwoofer. I replaced all my speakers, and bypassed the factoy amplifier using a specific T-harness, and maestro unit by iDatlink (the link is below) this allows me to connect directly to an aftermarket amplifier and Maestro unit ( kenwood XR600-6DSP) allowing me to keep my factory headunit so I can retain all vehicle systems. This system I installed worked flawlessly and sounded fantastic. After alot of thought I decided to install a tesla style headunit, once connected everything worked except all the audio, the Headunit has rca outputs for external amplifiers but the kenwood amp has no rca inputs. The kenwood amp, t-harness and Maestro unit were all designed to work together to bypass the amp. The amp connects through the T-harness so I can't use the Px6's rca outputs. Would it be possable to used the same headunit but use the wire harness deaigned for the trunk with no amplifer since I bypassed the amp in my original deaign, as of now the store will not allow me to return this, so I am trying to salvage this. Sorry long post I appreciate any help. maestro.idatalink.com kzbin.info/www/bejne/Y2iqmKB7l6yciNE

[@LinksWellInc]

jim g can you send some pictures to me via email? Pictures of the harnesses your talking about. Pictures of the back of the radio. Send them to [e-mail]

[@davidguzzi3315]

Do you have to update or download anything for the gps and how is so? I searched for your video you mentioned couldn’t find it! Please let me know I’m going to try to installing it myself

[@andrewbakenhus7980]

Wish yall had one for the 4th gen i have a 2012 and would love one for it :(

[@LinksWellInc]

We just have our IQ Radio for the 2012.

[@shanegraf9674]

This is a 4th gen...

[@DCHTOWN1]

I bought a 2018 ram but it doesn’t come with a touchscreen radio at all, will I be able to see my tailgate camera on my new screen or will I still have to use my mirror

[@LinksWellInc]

Because the signal is at the mirror and not the screen, it would require you to find the signal at the mirror and direct it down to the radio.

[@abdullahal-shimri3091]

saving money to buy this for my ram 1500.

[@Iron_DPT]

Will I retain my cargo camera with this? Also, I want to be able to add in a trailer camera will this unit support multiple cameras like this?

[@LinksWellInc]

It would but you would need to add a camera switcher. The Dodge trucks cameras all have individual signals at the radio. We only have a single reverse camera input. So you would need to add a switcher in-between the radio and all the cameras you want to see while in reverse. We have a front and side input as well but those will not work while in reverse.

[@funwithdirt7076]

I have a 2017 RAM 1500 Laramie with the 8.4AN. I use the Sirius XM radio. Is this supported?

[@LinksWellInc]

Our radios require the removal of the factory radio. So we don't retain the SiriusXM. We will have SiriusXM support once our interface is approved by SiriusXM. Until then you would have to either use the app on the radio or the app on your phone through the PhoneLink or Bluetooth.

[@funwithdirt7076]

@@LinksWellInc is that to mean you've applied for Sirius XM support for your radio?

[@LinksWellInc]

@@funwithdirt7076 yes. SiriusXM is proprietary and you have to first be approved to enter development. Then have to have your interface approved. We were approved to start over 2 years ago. And they have 4 of our radios as working test units currently and we are working through each step. So we will have interface approval at some point but we don’t know when.

[@funwithdirt7076]

@@LinksWellInc awesome. Thanks! Final question. Does the installation completely disable all vehicle voice commands or just commands that pertain specifically to radio functions? Phone calls in particular.

[@LinksWellInc]

@@funwithdirt7076 it removes the voice commands all together. The voice commands are part of UConnect system. Our radio doesn’t have a voice control program. Some phones will let you use the voice button to activate Siri or Hey Google when in CarPlay or Android Auto.

[@wespellerin9785]

List of parts or links to purchase for 2018 ram 2500 tradesman thanks

[@LinksWellInc]

Wes Pellerin the kit will come with everything you need. You can purchase through a local dealer, we have a find a retailer tab on our website that you can use to find a local retailer using your zip code, or you can purchase online through one of our online dealers like www.adcmobile.com

[@Kothas01]

Where's sirius? Is there time correction? Is there an eq with sub out or frequency shelving?

[@LinksWellInc]

Working on building our Sirius tuner. Should start testing in a week or so. Time correction, are you talking about individual speaker time alignment? We have a sub out but the control and crossovers are very basic.

[@Kothas01]

@@LinksWellInc I can see this is 10 years old technology at this point.

[@curtisknight4592]

Is this unit Sirius xm capable

[@cozycorner5915]

what would happen if you use the wrong power harness, would it cause a big problem or would it just not work and be able to swap it out

[@LinksWellInc]

The speakers would just be backwards. But our new harnesses now are the same one with a plug in the middle you use to change between amplified and non amplified.

[@paulwest7652]

I have a 2008 Ram 2500. I know the screen bezel itself will not fit in my dash bezel. Pending your answer to my question I plan to get a used bezel and modify it to fit the linkswell bezel. Would it still not work due to the wiring configurations (both the radio and AC)?

[@LinksWellInc]

Paul West you are correct. The CANBUS system in the 2008 is very different from the 2014-up. So it would be a much bigger job then just the physical mounting of the unit. We do have a universal Double Din T-Style that gives you the same size screen and Android features but in a universal install. So it won’t do anything for your Climate Controls. But it installs as simply as any other industry standard Double Din Radio. We have a short video on our channel showing a few of the features. We will have an install and functions video soon as well.

[@Tdub66]

Can you install one for the 12” infotainment system in the 2019 Ram? Yet keep it looking like the OEM unit.

[@LinksWellInc]

Not sure what you are asking. Are you asking if you can install a factory 12” screen into an older model truck? If so we couldn’t say. We are the manufacturer of the radio in this video. We aren’t a shop installing other product. Or If your asking if we make a 12” for the new Ram yes we do. You can find our video on that system on your channel.

[@felixgonzalez6693]

I installed one in my truck it’s not a bad system but has a lot of static from my Apple Pay end it takes a long time to start up if I’m in a rush and I need to reverse camera I have to wait

[@LinksWellInc]

Felix Gonzalez the PhoneLink app has updates that should fix the issue with the CarPlay. The camera also should work before the radio boots up as well. You should need to wait?

[@felixgonzalez6693]

OK thanks I’ll take it to my stereo shop so they can look into it

[@pappachuco]

What unit/setup would I need for a 2015 Laramie Longhorn? Would I lose the features below 1. Voice command + button on steering wheel. 2. Satellite 3. GPS 4. Vehicle diagnostics 5. Factory mic 6. Ability to adjust vehicle parameters such as rain sensing wipers, automatic high beams, comfort controls for cold weather, etc.

[@LinksWellInc]

Anthony Arredondo you will lose voice control because we don’t have a system voice control. Only within the app. Sat radio we are still working with a SiriusXM to develop our interface. GPS we can run data based systems or we can install a built in one. Not sure which vehicle diagnostics you are referring to? We do not retain the factory mic, using our own mic gives us better quality control. We retain about 90% of the vehicle programming options.

[@pappachuco]

@@LinksWellInc Thank you for the reply. The Diagnostics I am referring to apply to the uconnect system. It does a monthly parameter check on all systems, senors etc and generates a report. I was hoping your system had some like this. In regard to the programming functionality, do you know which of the following I would lose? 1. Safety & Driving assistance a. Park sensor volume b. Tilt side mirrors in reverse - on/pff c. Rain sensing auto wipers - on/off d. Hill Start assist 2. Lights a. Headlight off & interior illumination delay. b. Headlights with wipers - on/off c. Auto dim high beams d. Flash lights with lock - on/off 3. Auto-on Comfort 4. Engine off options a. Engine off Power delay b. Headlight off delay 5. Trailer Brake settings - can save 4 Different trailers. a. Heavy Electric; light electric or hydraulic; Heavy electric over hydraulic. I do tow quite a bit and would specifically need this adjustability. Thanks for the reply.

[@Xavird79]

so it will be ok to use in a 2018 ram 1500 tradesman right ?

[@LinksWellInc]

Yep.

[@alaaaldenali5892]

Where we can find this?

[@LinksWellInc]

You can use the find a retailer tab on our website to find a local dealer or you can purchase online through one of our online dealers like www.adcmobile.com

[@LTGnetwork]

anything simmular for a 2010 dodge ram ?

[@LinksWellInc]

Sort of yes. This video shows our IQ 201-H which should work in the 2010 Ram as well. You can check our Instagram for more pictures of it installed in a Ram. kzbin.info/www/bejne/gZTdgnmGZb13oJY

[@i6ot14ya]

Is there one available for 2019 ram 2500 bighorn?

[@LinksWellInc]

Yep! We have a video here showing it off.

[@CuttDogb]

I’ve been looking to purchase as I’ve just installed a regular double din fir the time being in my Ram but i also have a entire aftermarket system in my truck with 4 channels pre amp out puts and a 2 channel sub out put ...my question is does your unit offer a 4 channel as well as a 2 channel sub output thanks in advance and look forward to getting if it has what i need

[@LinksWellInc]

We do indeed have front, rear, and sub RCA outputs.

[@tommyyguunn6984]

Can that fit in a 2011 Dodge Ram

[@subicbay100]

Great presentation and very informative video. Would this be compatible with my tailgate cam which has a camera interface (PAC) BCI-CH4I. My truck is a RAM 1500 2016. Please advise. Thank you.

[@LinksWellInc]

earlwin aguillon it works with the tailgate camera. Though I am not sure what the PAC piece does so I couldn’t say for sure how it would play into the system.

[@kevinpate306]

How come this doesn’t use the OEM microphone with the factory radio with hands free driving? Would make more sense and save a couple of steps.

[@LinksWellInc]

There are a few reason as to why. One is not all microphones are created equal. When you are working with a Bluetooth chip and system that is not specifically Dodge or Ford or Toyota, or etc. the microphones don't always work well with a foreign Bluetooth system. Another is when removing different pieces of the factory systems it renders other parts unworkable. You also have the fact that in product development of aftermarket equipment it is a lot of times better for quality control and for warranty purposes to use as many parts of our own in development and production. If Dodge was to have a run of bad microphones, or anything was to go wrong on the factory side it would be very hard for us or our dealers to diagnose if it is a factory microphone issue or an issue with our unit when we do not have the ability to replace it or test it. So as seemingly beneficial using the factory microphone may seem in the big picture of things it offers more struggle then victories in the work to produce a reliable product. We did consider it though.

[@noutossisoadip3164]

Hello ! On my Jeep Grand Cherokee 2017 , the voice command on the steering in no more operating. What do I do please ?

[@LinksWellInc]

We don’t have a Grand Cherokee system? We wouldn’t know how to help. Sorry.

[@gilhernandez605]

Nice but why is the desktop in black & white?!?!?!?

[@LinksWellInc]

GIL HERNANDEZ it’s all done in a mono chrome to give the factory look to the main icons.

[@MarioElzen]

What wires have to be intercepted to add a cargo camera when backing up? I know to add a switch and intercept the tailgate camera but when backing up I need the cargo camera to come on when hooking up my 5th wheel. Not sure what wires to intercept and attach to my two-way switch that I have to install.

[@LinksWellInc]

Just interrupt the RCA. No need to interrupt the power feed.

[@MarioElzen]

@@LinksWellInc When you say the RCA there are several in yellow red and white. As well the other side for the tail gate camera and cargo camera wires. Which ones?

[@LinksWellInc]

@@MarioElzen they all should be marked. So you would take the cargo camera and the tail gate camera RCAS plug them into the external switcher, that take the output from the external switcher and plug it into the reverse camera input on our radio.

[@ecodiesel1552]

Does this come with apply carplay

[@ZackKirschnick]

where do you buy? i looked on the websit and its just the product. i cant add it to a cart or anything

[@LinksWellInc]

We don't sell direct retail. We have a find a dealer tab on our website that will list dealer nearest to you by zipcode, or if you want to purchase online, we have a couple online dealers like www.adcmobile.com

[@odaiamer8474]

Hey guys I have a 2019 ram2500 tradesman with a 5” screen I like to update it can you guys help me plz!

[@SuperbikeCoach]

I've moded my oem 8.4 so that i also can watch movies on it (lockpic or something, literally just a different cabl harness). I wonder if this also will work with this t-style.

[@LinksWellInc]

Superbike-Coach Corp well our system already allows you to watch movies through USB or using a variety of streaming apps.

[@robertoramos8257]

What really just a harness is all you need to do that?

[@gt500mustang4]

Superbike-Coach Corp how did you mod your oem 8.4 touch. With rhe modify can you add personal pictures

[@maquinitas-rojasslots1091]

How much to do this to a 2019 ram 1500 lonestar? Labor and all.

[@LinksWellInc]

Well it would depend on which 2019 it is. If it has the new 2019 interior we don't have a system to work for that application yet. If its a 2019 classic with the 2018 interior our system MSRP starts off at $1,095.

[@christopherbaker6375]

My 2014 Ram doesn't have a back up camera. Will I be able to install any back up camera, say like the license plate camera, and it work with this. Also can the back up camera and front face camera both record footage in the event of an accident?

[@LinksWellInc]

Christopher Baker the system has a universal camera input. So it can work with the Factory or an aftermarket. As for recording unfortunately no. We do offer a USB DVR that will record and you can control it on the screen. But our system doesn’t have a way of recording on its own. It would require an external DVR of some sort.

[@christopherbaker6375]

@@LinksWellInc Awesome thank you for the quick reply!

[@LinksWellInc]

Christopher Baker you are very welcome. We are here if you have any other questions.

[@nishesshrestha9080]

Hello Linkswell, i noticed there is a mic on screen as well, but in video you said run mic and camera from side. Confused??? Please verify that

[@LinksWellInc]

nishes shrestha there isn’t an actual mic on the face anymore. We removed it due to an issue with an echo in calls. We just haven’t done the work to retool the molds.

[@zacharyboulware1117]

Do u have too install the dvr? Will the radio work with out it ??

[@LinksWellInc]

The DVR is a extra part. Not needed at all

[@JonLMcNair]

My 2018 ram 2500 already has mics for the bluetooth and voice commands. Would I still need to use the included mic?

[@LinksWellInc]

Yes, you have to use our microphones we are not able to interface to the factory mics.

[@ATC235]

Any new updates

[@LinksWellInc]

For a Generation 2 radio?

[@briankelley8667]

Does this system work for a 2013 Ram? The systems are the same from ‘13 thru ‘18 but it only lists it for the 14 thru 18.

[@LinksWellInc]

Brian Kelley we list it for 14 because the 13 was a split year. Half came with the old dash. If your 13 looks like this one then it will work.

[@briankelley8667]

LinksWell Inc. thank you very much for the info!! I had no idea that ‘13 was a split year. Mine does look just like the one in the video

[@bigopness]

I have a 2014 ram 1500. Will it work? And where can I purchase?

[@LinksWellInc]

It should indeed work on your 2014. There is a find a retailer tab on our website that you can use to find a retailer near you. www.linkswellinc.com/find-a-dealer/

[@felixgonzalez6693]

I just noticed that you said it also comes with the front camera because the stereo shop that I went to wanted to charge me for the front camera And navigation

[@LinksWellInc]

Felix Gonzalez ya, we had to pull the camera out of the packaging due to the tariffs raising.

[@joeinacio2049]

Satalite radio??

[@LinksWellInc]

Still working with SiriusXM to get our approval to add it. Until they give us the thumbs up you would have to do it using the app on the radio or the app on your phone.

[@luisgtzchannel7776]

Can these be installed in a 2010 ram?

[@kriptic5016]

I got the wrong canbus what do i do now?

[@LinksWellInc]

What CanBox did you get? Where did you get it?

[@kriptic5016]

@@LinksWellInc Well i bought a refurbished one and i revieved the canbus for the 2019 ram not the 2016. Im assuming they are different

[@LinksWellInc]

@@kriptic5016 not necessarily. Does the radio not power on?

[@YNCX]

Does this modification fit on 2010 Dodge Ram 1500?

[@LinksWellInc]

It won’t. Just the 2013-2108. We have an IQ Radio that would work on the 2010. You can check it out on our Instagram.

[@davelindo3856]

Why not show the backup cam?

[@LinksWellInc]

Not sure what you are asking?

[@davelindo3856]

@@LinksWellInc backup is important to me! Wanted to see the size.

[@LinksWellInc]

@@davelindo3856 understood. So the camera will fill the width of the screen and be as tall as the image can be to keep the correct ratio. If you watch our video on our MultCam interface. It will show you the camera image ratio on the screen.

[@fj6062]

So I’m safe to assume this will work with a 2016-2017 ram 1500 express

[@LinksWellInc]

Felton Johnson Express? As in the van?

[@joelopez6233]

What functionality will I lose on my 2016 ram rebel if I install this unit?

[@LinksWellInc]

Joe lopez has not features we can’t currently retain are the trailer brake settings, air ride settings and voice controls.

[@tommyfavors7552]

The sun and any bright reflections makes it impossible to see the display on the first generation style. Does this unit have the same mirroring effect as well?

[@LinksWellInc]

The GEN II has a bright and High Resolution screen, but it being as big as it is the sun does still effect it.

[@Davidj3]

Do you guys install at your shop, or do you do think a stereo shop can install this unit?

[@LinksWellInc]

David J we don’t do installs or sell direct to the public. But we have a find a retailer tab on our website that you can use to find a local dealer that can get you the radio and install it for you.

[@Davidj3]

@@LinksWellInc great! Thank you!!

[@stanpucci4137]

Great job! Keep up the great work

[@truckdriverworkouts8370]

I am looking for my new 2019 ram 1500 new body style

[@LinksWellInc]

Truck Driver workouts we will have a radio for the new Ram soon!

[@rexnhogz]

do these work on a 2019 1500 classic?

[@LinksWellInc]

If it’s the classic dash yes! If it’s the new dash then it would be our new 12.1” one.

[@jaasielvilla5231]

Since 2013 was a split year, what info do you need to confirm if the Generation II will fit on a 2013?

[@LinksWellInc]

So long as the dash is the same shape as what is in the video it should work!

[@thegreatempire3882]

How well does this radio work with the 2013 Ram 1500 Laramie with auto climate controls and other truck settings like air ride suspension and lighting?

[@LinksWellInc]

2013 is a split year. Not all 2013's will work with our system we would need to see your dash to confirm. Regarding the settings, is the air ride only programable through the radio screen? What lighting are you referring too?

[@thegreatempire3882]

LinksWell Inc. Only through the screen. Lights on when wipers are on, light off delay, etc

[@stevenbyrne1768]

Will you guys be making these for new new Nissan Titans at all?

[@LinksWellInc]

Steven byrne we are talking about it but we haven’t started yet.

[@allencervantes2463]

can i put this on my 2013 ram 1500 quad style?

[@LinksWellInc]

Allen Cervantes if you have the 2013 that has the same dash as the 2014-2018. They built 2 versions of 2013 trucks.

[@DJAKmaghabek71588]

Does the factory mic work with this radio?

[@LinksWellInc]

No. Have to use the mic we supply with the radio.

[@chadhynes9950]

What would it cost for this in my ram. I have a 2015 sport. Loaded. I've seen 1 on ebay. It's only 80p cdn mo ey but it seem very cheap to what you guys have! What would your system cost me?

[@LinksWellInc]

Chad Hynes our system cost $1,095.

[@cristhianmontes9416]

@@LinksWellInc where can I purchase your system?

[@LinksWellInc]

@@cristhianmontes9416 If you want to purchase online, check out www.adcmobile.com

[@jimhuggins5783]

are you able to use the factory microphone built in to the mirror?

[@LinksWellInc]

Jim Huggins we aren not. Have to use the microphone that comes with our system.

[@anthowinebradford2978]

I have a question does that work on any of the Dodge trucks cuz I'm about to get my uncle's 2010

[@LinksWellInc]

Anthowine Bradford the 2010 has a completely different dash and CANBUS set up. So this system won’t work on that truck. But you can install one of our Universal 10.1” Double Din T-Style Radios.

[@anthowinebradford2978]

Could you give me more information about that system you said that'll work on my 2010 Ford RAM and how much it is cuz I definitely want to get one I would love to get one just like the one y'all have for the newer models but I guess that's wishful thinking

[@anthowinebradford2978]

@@LinksWellInc how you doing this is Antoine again I would love to know more about that system that I can put in my Dodge Ram 2010 since I can't use the system for the 12 and up I would love to find out more about that touch panel if it is a touch panel could you send me the links to find out more about it or how much it cost cuz I really want to set this truck out and look good thank you

[@LinksWellInc]

Anthowine Bradford for sure man. This link takes you to our website and there are a couple KZbin videos showing the install and some of the features. www.linkswellinc.com/products/t-style-radio/ts-dduniv10-1a/ We also have some pics on our Instagram and Facebook. You can find us at Linkswell_Inc

[@j.dmalone6544]

What do you offer like this for the 2010 Ram?

[@LinksWellInc]

J.D Malone we only have the Universal Double Din currently.

[@tonymorales395]

Hod much for 2016 dodge ram laramie

[@LinksWellInc]

tony morales GEN 2 starts off at $995 and GEN 4 starts off at $1,145.

[@alexmedrano6501]

Hey bud have a 2013 ram 1500 with ac controls not working can you send me the link for that box?

[@alexmedrano6501]

4 speed

[@LinksWellInc]

Alex Medrano box? You have one of our radios?

[@alexmedrano6501]

LinksWell Inc. yes

[@LinksWellInc]

Alex Medrano what happened to the one that came with the kit?

[@alexmedrano6501]

LinksWell Inc.bought it from offer up and guy didn’t give me the box

[@gque021]

Will you be making one for a 2009 Cadillac Escalade?

[@LinksWellInc]

Its not on our development list currently, and really not sure it will make it to the list unfortunately.

[@dennisblackburn6585]

Where is this bought? I tried the LinksWell website

[@LinksWellInc]

We are the manufacturer and don't sell direct retail. We do have a find a dealer tab on our website that will list local dealers by Zipcode, or you can purchase online through one of our online dealers like Adc Mobile.

[@98_ksxj]

Any idea when the OS will be updated from 4.4.4?

[@LinksWellInc]

Blake Larson we just released our GM System with the 7.1, and the Jeep JL System with 8.0. When we tested the 6.0 when we were building the GEN 1 and 2’s, Android 6 was failing so we stayed back on Android 4.4.4 to assure the least amount of issues. So far In our testing 7.1 and 8.0 have been solid but before we switch every system over we want to be sure. So as long as the GM and Jeep systems don’t report any issues caused by the operating system over the next 6 or so months we will begin the software rewrite for the Ford and Ram systems to run most likely the 7.1.

[@ferdysolorzano6221]

Hi bury tank for the video i already installed the radio and working ni e but i bought the tile gate back camara but it doesn't work the screen radio telling me not sign so what can i do can you help me whit that please

[@LinksWellInc]

Ferdy Solorzano where did you get the power for the camera?

[@davidmcfarlane9233]

Does it carry serious sat a light radio

[@LinksWellInc]

David Smith we are working with XMSirius to get our system approved. In the meantime it will work with the use of the XMSirius App.

[@07THE19]

Is there one for a 2012 ram 3500?

[@LinksWellInc]

We have an IQ Radio application for the 2012. You can see some videos on our channel or our Instagram

[@xxlt73]

What if I use sat radio what do you do

[@LinksWellInc]

xxlt73 we are working with the engineers at SiriusXM currently to develop our interface for SiriusXM. As a company you have to be excepted into the development process and the process is at least a 18-24 months depending on how fast you can develop your interface. SiriusXM won’t allow you to release your interface until they have spent 12 months testing it after all development. All that to say we have been accepted and have begun the process but real time is at least 12 months from release. In the meantime if the app is on your phone you can use the app on the Apple CarPlay or Android Auto, or you can download the app to the radio and use a hotspot and run the app from the radio itself.

[@monkeylord88]

Does this have apple care play?

[@LinksWellInc]

We have our PhoneLink which works like CarPlay and Android Auto