#shorts Do you have a Cricut Easy Press Mini but don't have a Cricut Heat Press Mat? Here is the hack that I came up with.
Пікірлер: 47
@totally.not.arya_2 жыл бұрын
I’m getting a easypress mini and I am definitely going to try this,you’ve got yourself a new subscriber
@littlecraftnest2 жыл бұрын
Thanks. Enjoy your mini press!
@surejvimukthi77316 күн бұрын
Why not doing dtf insted of ironing twice?
@sydneyfrancesca Жыл бұрын
How long does a t shirt made with cricut supplies last especially after being washed and dried? Thank you for the helpful video!! 🙏
@littlecraftnest Жыл бұрын
You are welcome! Shirts can last quit long if you press them properly and wash them properly. The design typically lasts the life of the garment. Make sure you are washing with cold water, inside out with no fabric softener.
@glo7802 Жыл бұрын
Thanks for sharing!
@SheWritesHerJourney_ Жыл бұрын
Love this !!
@littlecraftnest Жыл бұрын
Thanks
@Batman-tw5yv Жыл бұрын
What machine or item do you use to print the design?
@littlecraftnest Жыл бұрын
I use the Cricut Maker to cut my vinyl. You can check it out here (affiliate link). cricut.pxf.io/c/3575984/1253601/15311?prodsku=2004193&u=https%3A%2F%2Fcricut.com%2Fen-ca%2Fcutting-machines%2Fcricut-maker-machine-champagne%2F2004193.html&intsrc=PUI2_9492
@rizalynpadilla8325 Жыл бұрын
I luv ur video can u tell what materials did you use for printing on the shirt, i have my mini heat press. Thanks and god bless to you
@littlecraftnest Жыл бұрын
Thank you. I used Heat Transfer Vinyl.
@FuryousD8 ай бұрын
Thats good and all but i dont own a mousepad. Another solution especially if u are using an iron for this is to use an ironing board.
@littlecraftnest8 ай бұрын
I would not recommend an ironing board as you need to use pressure when applying HTV and ironing boards are often unstable. You could take the padding of your ironing board and put it on a sturdy table.
@FuryousD8 ай бұрын
you dont need to apply pressure at all mate, you just set it there and it does the job, i know because i have just gotten a Cricut and did just that, just on a solid table, but that's because i dont have a readily available ironing board to try it out myself.@@littlecraftnest
@duran212 Жыл бұрын
How long do you do the pressing with it?
@littlecraftnest Жыл бұрын
Depends on what material you are using. Check out Cricut’s Heat Guide here cricut.com/en-us/heatguide
@duran212 Жыл бұрын
Thank you 😊
@littlecraftnest Жыл бұрын
You’re welcome!
@Non-xc2zy7 ай бұрын
I have a mini device. What type of paper is used for this device? Would any thermal vinyl paper work??
@littlecraftnest7 ай бұрын
I’m pressing heat transfer vinyl onto the shirt and using parchment paper in between to protect the shirt and the press.
@Non-xc2zy7 ай бұрын
@@littlecraftnest 🙏 thanks
@BabyBunny12825 ай бұрын
Where did you get the vinyl stickers from?
@littlecraftnest5 ай бұрын
I made it with my Cricut machine. Check out my channel to learn more.
@MariaNoriegadelarosa5 ай бұрын
Question how do you put png into a tumbler can you use a mini heat press machine or does it have to be a special type of press
@littlecraftnest5 ай бұрын
You would need a tumbler press or sublimation oven. Watch this video to learn more kzbin.info/www/bejne/bnanf5uumMySrdksi=eaaaUlNXedL6GPGg
@supriyabhattacharya64718 ай бұрын
Need more models
@mr.chompers3026 Жыл бұрын
Can you just use an iorn?
@littlecraftnest Жыл бұрын
Yes you can. Make sure you are using dry heat (moisture and spray options must be turned off). Also keep in mind that irons don’t heat up evenly across the surface plate. Typically they are hotter in the center of the plate and cooler towards the outside. You will also need to press harder and for a longer period of time using a home iron. So yes it is possible but you will get better results with a heat press or Cricut easy press.
@JK-jm6kd11 ай бұрын
Do you need specific ink or printer?
@littlecraftnest11 ай бұрын
This is done with Heat Transfer Vinyl cut with a Cricut machine.
@supriyabhattacharya64718 ай бұрын
Need more variety of heat press
@kristamontesa220 Жыл бұрын
what's taht sheet above the shirt when you pressed? is that teflon
@littlecraftnest Жыл бұрын
Parchment
@printyourimaginationspw82618 ай бұрын
can we print on cotton??
@littlecraftnest8 ай бұрын
This is heat transfer vinyl put on a cotton onesie. If you want a printed design you could use printable HTV.
@iamangela171 Жыл бұрын
I think I'm buying one today
@littlecraftnest Жыл бұрын
Nice
@stephdavis8462 Жыл бұрын
I absolutely cannot get the design to stick using my cricut mini press…any idea what I’m doing wrong? 🤔
@littlecraftnest Жыл бұрын
That sound frustrating. You can check the Cricut Heat Guide to see if that helps. Different materials require different times and temperatures . cricut.com/heatguide?gclid=Cj0KCQjwldKmBhCCARIsAP-0rfyAxrNLMrk60G8qhf9EQ3wDAWE5Fgi2c3KldYjlu7OfKYNwMxE91xsaAr1MEALw_wcB
@braydencolon316 Жыл бұрын
I just use the stand my dad irons on
@naidehernandez02 Жыл бұрын
Genius! I’ll definitely use that now
@pikaapikachuuu Жыл бұрын
is there a difference? genuinely curious?
@saitvprintandcut12229 ай бұрын
hi what is that called that little paper on the top when you use the hot iron?
@littlecraftnest9 ай бұрын
Parchment paper
@alicejohnson90805 ай бұрын
Has anybody’s easypress stopped working within 8 months? Press the on button, red light comes on beeps three times and goes off.
@littlecraftnest5 ай бұрын
This should not happen. Call Cricut Support. If it’s less than a year old it should still be under warranty.