Lizard Skins Bat Grip How To Install - Right Handed | Bat Wrap | Baseball Bat Grip | Bat Grip Tape

[@dragon_2085]

“You don’t have to rush.” *Goes like 100 mph.*

[@Bradley_doofus]

I think it’s because he works in the bat tape industry even so it is kinda inconvenient

[@300kike]

As a marching drummer in high school, we wrapped our sticks in electrical tape the same way shown in this video for them to last longer and my music teacher literally would wrap a pair of sticks in maybe a minute and a half. Then again he's been doing it twice a year for 30+ students at a time for 20 years, but still. It's cool to watch

[@zuxyr]

That’s not even fast wut

[@CrypticMold]

106 on the radar gun

[@danreyes736]

You don’t say things like that!

[@landonhill1942]

my man looks so depressed at the end like bruh u need some ice cream

[@hypeplayzzzzz2441]

Ice cream grip

[@muttonashkii]

I used the two dot over lap...it brought me back to the original grip length...34" slow pitch softball bat

[@acebuddah2971]

So you have to take the original gripping off or it doesn’t matter.?

[@willsrestorations]

Any grip that's on the bat needs to be removed and that adhesive that's left needs to be removed also.

[@devinquigley1169]

Very helpful!

[@tac9-on-yt]

Lol i use that for my gaming mouse

[@reallymigga]

ンフィ you need to use it to stick some bitches into yo life

[@jusstLeo]

@@reallymigga You just killed him, Jesus 💀

[@tamaratamrot2681]

I did something like this a month ago with plans from Woodglut.

[@coreychambers6543]

my man great demo I will try mine in green

[@leocymbalsky9110]

Just use pin tar

[@justisnelson3274]

Poo Bear my mayne

[@kadinmcdonald865]

Yah but that crap gets everywhere if it gets hot

[@stevenwood3649]

Does it matter which direction you wrap? How tight should you pull it as you go? How much overlap is recommended? About how far down the bat does it cover if you go one dot overlap? ...2 dot overlap? Why are none of these obvious answers covered?

[@overdramaticloser8987]

Lmao, there are likes but no replys

[@michaelyip657]

A different video mentions to go from left to right if you are a right hand batter. Overlap one or two dots on the grip max based on your preference. I don't know what the correct answer is but I cover less dots the higher the thickness otherwise it feels too bulky.

[@booly5124]

@@michaelyip657 what if your a switch hitter

[@michaelyip657]

@@booly5124 I'm not sure the correct answer to your question. I guess set up the grip based on the majority of your anticipated at bat directions which I assume would be right handed. Most pitchers in my league are right handed pitchers.

[@rich1958]

@@booly5124 don’t ask and don’t tell

[@kadinmcdonald865]

I just put some on my bat and the biggest thing to not get wrinkles is to stretch it a little bit

[@matthewkish7353]

Just wrapped my son's bat with the 1.8 and it is as easy as it looks. Some advice for those using the 1.8: Use an one dot overlap with a tape that thick. I did, and thank goodness. A two dot overlap would have felt like a sponge. Also, the 1.8 finishing tape is thick. Just the electrical tape will do unless you want the cosmetic effect.

[@wiegelja]

Do I have to use electrical tape?

[@matthewkish7353]

@@wiegelja Nah. But it is what a lot of the manufacturers use on their wraps from the factory. I always thought it made a nice finish and kept the wrap from unraveling. But if you get certain colors it might ruin the look. My son always uses black, so it doesn't matter

[@dirrbirr]

@@matthewkish7353is it ok to just use the finish tape instead of electric tape?

[@matthewkish7353]

I'm sure it could work. The electrical tape gives it a tighter fit though. A lot of bats will have it as the finish of the original grip tape from the factory

[@dirrbirr]

@@matthewkish7353 thank u for being helpful

[@Samuel-km5yf]

I learned nothing from this video. You’d think a video about how to wrap a bat would cover some of the very basic questions…e.g. how tight do you pull? How much overlap?

[@leosacerdote7976]

0:29 “comes with full adhesive to the barrel” I thought u put it on the handle

[@PreCiseCarbon]

this guy talks like a robot

[@angieruehs4104]

Sometimes it pays to hire a spokes model/actor. Billy Mays may have been a coke head and the ShamWow guy might have beaten up prostitutes, but they were pros. Not off camera, where they were nut jobs, but boy could they explain their products.

[@ks-bg5uk]

Who cares how he talks. What matters is the content and demonstration.

[@pixaryfn]

video sucks my wrap keeps bubbling and wants to just wrap around the same part of the bat over and over

[@Bigfuzz22]

The video does suck. Stretch it some with firm but even pressure while you wrap to keep the wrinkles out, as you go down the bat you’ll have to “steer” the tape to get the overlap even

[@OhtaniSolos]

Bro you are my saving grace you are a true legend I was putting on bat tape for my brother it truly look super bad then my brother said you are going to give me 25 bucks for messing up so I unraveled the tape and search it up and you help me so much it save me from death thank you so much

[@juanbarroso2833]

How long should the grip be on a 33 inch bat?

[@Raiffjr]

@@jesussavesministries3558 lmao wtf

[@Gavin-kj2gz]

@@Raiffjr he's spamming it on every comment 😂

[@thearabianmage]

This dude drank *way* too much red bull.

[@jonboyi8523]

Can you use this on bike handlebars for better comfort and grip?

[@jbrune2433]

Of course, may need to add little more adhesive if handles are under heavy use. Would help with rain too

[@impish-love9713]

Bro I fucked it up so bad oh well gives it character 💀

[@camoducktape2120]

Lizard skin is awsome but I can’t buy it because of the price I am a kid

[@cesarsamaniego8814]

Well, Yeah. Money is always a struggle

[@kevincane4761]

Thank you my son should be hitting bombs come spring season

[@dellanoce9143]

Nice i just came back from Ripken

[@angieruehs4104]

Right handed? What if one is a switch batter? Pete Rose says, "switch batter," not "hitter."

[@shanewhitefeather6298]

Does not really matter. A good grip is a good grip. This helped me wrap my bats better. And Rose did say "Switch Batter."

[@lonewolfmike33]

It doesn't matter if your right or left handed. What kind of stupid question is that. DUH

[@julianakriner5114]

PBA420 it actually does because the grip would unravel quicker if a left hander swung a right wrapped bat

[@lonewolfmike33]

Julian Kriner I was going to say yeah, you got a point since your last name is Kriner. But after further review of the tape on my bat. I still say no because there is no movement, plus the end on the tape on the handle is taped around the end of the tape.

[@ZoomingWrenches]

Thanks lizard skins! I went to use ur product and all of the adhesive came off with the 3m covering over it! Now my bat has no grip!!! Awesome 🎉

[@LizardSkinsProducts]

Sorry to hear that happened, it definitely isn't a common issue we hear about. If you will please email [e-mail] a team member will help you out. Thanks!

[@borgcutus5780]

What's the feeling on adding wrap overtop of existing? I have a brand new Miken bat and it has a fairly thin handle area. There's nothing wrong with the wrap, but I'd like to add some thickness. Can I use .5mm or 1.1mm and go right over top?

[@benjamin_mcallister]

You’d probably take off the old thin one, to replace it with a single thicker one. Instead of doubling up. Lizard skins only cost around $15.

[@mitchellfountain3231]

This guys voice really keeps me intrigued

[@misfits5487]

What a fucking pain in the ass. Biggest waste of fucking money. Literally had to unwrap it so many times to get rid of bubbles that it’s not even sticky anymore

[@gustofanelli6311]

Are you the one that runs the Instagram?

[@thecamps7574]

I have a problem. My son bought the 1.8 ultra home today from Dick's. I started to peel back the adhesive cover, and the glue stuck to the 3M layer, and not the Bat Grip itself. Essentially making the Bat Grip useless because it won't stick to his bat. Truly disappointed for my son.

[@goreyboggs]

I watch this video every time I put it on a bat.

[@stephenturner8273]

I watch it every time I wake up in the morning.

[@roseannsykes3624]

Are you stretching it here? because I just did mine and it’s wrinkled up and did not go very far up the bat. Just wasted a whole strip.

[@camoducktape2120]

Please make lizard skin cheaper

[@angieruehs4104]

You and me both, Camo!

[@bobbygolding2859]

It’s literally only $11...

[@kylerbuican8345]

It's only 11 for the one color grip and 13 for multi color grips lol I thought they would be like 20 and 21 or something like that

[@russell_kberg1]

why for only right handed, is there such a way to wrap it for switch hitting? does it make a difference?

[@gexotic4668]

No the title just says rh no dif

[@janetfish6929]

I'm actually thinking he's talking abt if a rt handed or left handed person is taping 😂 WTFK?

[@CallMeP5ycho]

3 years later. There is difference for Rh and lh hitters. This shows for RH, it has to do with longevity of tape job/feel. In a swing, your top hand rotates, the tape in this direction allows that rotation of top hand to not have resistance and also makes it so your glove doesn't rub hard against the tape. Helps preserve batting gloves as well. If you swing without batting gloves you'll really notice the difference in direction of tape :)

[@javieri.vazquez9974]

This must doing in the floor one person roll the bat anoter pull de grip😂

[@hadleydom7592]

Do you have to put on electal tape

[@lanesalbacka1821]

Would have been cooler if he knew what the parts of the bat were actually called. Or explained how much to overlap. Or explained how tight to pull the tape. But he sure does know how to wrap a bit nicely.

[@MistyOdellTotallyLorelei]

My Coaches told us the amount of overlap is personal preference but keep it consistent. That's how I apply my daughter's grip tape & it's always worked for us (she's playing 14u now, started in 6u) and I go with a little tension as I'm applying it but not much.

[@wendypowell2270]

He has helped so much

[@lukesipe7285]

Do you have to have electrical tape

[@DirtNassty]

No you don't.... But who the hell doesn't have electrical tape laying around

[@lukesipe7285]

@@DirtNassty I said that 4 years ago

[@DirtNassty]

​@@lukesipe7285I'm aware... My comment still stands tho brother lol

[@SynysterGoose]

That's not the barrel.....

[@camo17]

No it’s the handle 😐

[@owenmcmanus4813]

The adhesive on mine stuck to the wax tape 😐

[@tcol98]

Customer service doesnt answer emails

[@coenm209]

Is that a metal bat?

[@prizm5466]

CoenM20 conposite

[@gavinkoehler3769]

difficult at first but totally worth it

[@raywhitehead730]

Great help, and well done.

[@Shoe5tring]

Thx

[@ethanwells7789]

this shit makes no sense

[@gavingregory2489]

Thanks this helped!☺️☺️

[@paulnovak4281]

@@jesussavesministries3558 idk seems kinda gay

[@cmareesh]

Didn’t help

[@abelflier]

On the amount of overlap, one of your distributors suggested either a "1 dot" or "2 dot" overlap. This video didn't specifically offer how much overlap it should be. Please advise. Thx!

[@127Mason]

Try doing one dot thats what I did

[@rotcod2886]

That's what I was wondering.

[@Tj-vc5sq]

How much difference in thickness is there between 1.1 and 1.8?

[@rd0303.]

Gamer Vidz .7 millimeters lol

[@pingi223]

Bhahahha. damn ray. Im laughing hard at that one.

[@rich1958]

I was told the 1.8 is what comes on most bats. So with that if you are looking for similar fit go that route.

[@sellfone1913]

@@rich1958 not at all, 1.1 is industry-standard most of the time. Personally, I find 1.8 way too sponge-like.

[@whitmitchell2805]

Great directions. To the point with simple clear details. Thank you.

[@xxrydorrxx2936]

do you need the electrical tape?

[@Joetrout]

No

[@mor.5703]

xXRydorrXx I used a small piece of duct tape.

[@chriscole9893]

All I ever used

[@kadinmcdonald865]

It works the best in the long run

[@TyroneGibbs]

Thank you

[@mojobreaks9752]

Great video helped a lot

[@deadpool-ev2fh]

This helped do much thank u

[@jimmychen253]

Can you help me your so good but I don't have tape and mines is breaking.

[@100mphFastball]

I'm switch hitter. You got switch hitter tape?

[@angieruehs4104]

That's what she said. "She" being me.

[@lonewolfmike33]

Its all the same for right and left handed. You got switch tape lol. What a DUMBASS!

[@lolbryce9]

@@lonewolfmike33 except it's a valid question. If you tape right and hit left, the tape unravels faster. Its basic science "dumbass"

[@lonewolfmike33]

So simple. The most stupidest people in the world can do it. Well, almost I guess. Judging by the negative comments on here. There are ALOT of stupid people out there. Great video and easy instructions!

[@josephtaylor2085]

7 WILD you called people stupid three times and you can’t even use simple grammar. “Most stupidest” really man stop being a hypocrite.

[@boplum9tay790]

A lot is 2 words.

[@jake.euler19]

This only has 3 comments come on this helped a lot

[@thatoneguy-cg4re]

mine ended up a lil short but its ok

[@ExposClassics94]

Anyone who uses lizard skins on wood bats is a queef, athletic tape is for real men

[@naufty8993]

i don’t think i’ll ever put on lizard skin correctly. shit is so wrinkled and i think i’m doing it right but i never am

[@MWB18]

I use pine tar.

[@josephtaylor2085]

Huskies19 I use grip and pine tar

[@antonshkabara3090]

My adventure with woodworking started with Woodglut.

[@harperhendrickson4863]

why don't you get a spokesman that I don't... know smiles?

[@brownebrown489]

No help at all