Peugeot and Citroën BSI - clone, pin code read, virginize/ reset.

[@Kasmort0206]

Hi. Is it possibel to send you my bsi for repairing? I have a citroen xsara where the sidelights doesn’t work. Which country are you from?

[@LMAutoRepairs]

Hi I am in the UK. The problem is that I will not have how to test it, and I don't like to do repairs without be able to test the result... If something does not goes as planned, I will not have how to tell, and then you will be receiving it back, to find out that is still no working... Sorry, I can help you through diagnostics, and guide you through (Consider to support my channel and all the hard work put into it at www.patreon.com/LMAutoRepairs Thank you), but that is about it... (I will love to help you to the best as I can! kzbin.info/www/bejne/oZKQiqWcociXY9Em55s) Hope you understand!

[@Kasmort0206]

I understand. You’re right. Your respons just tells me that your take pride in delivering high quality services. I will look at the channel. Thank you.

[@joshbennett6293]

Hi mate got a water damaged ECU from a Peugeot 207 unable to read old ECU has its dead and doesn't contain a eeprom chip. Could I virginise a repalctment ECU then read the pin from the bsi to allow me to programme the new ECU with Peugeot planet ? Thanks

[@LMAutoRepairs]

@@joshbennett6293 Yes... absolutely you can... 👍👍👍

[@emredagyaran7494]

Hello, i can not find the connections for the Citroën c3 Bsi F02-00. Do you have a link or tell me how to do it please. Connections are also possible from the connectors so i can also hook up there if needed.

[@abdulganiyuhamza7810]

Pls tell me what you use in cleaning the eeprom the alcohol

[@abdulganiyuhamza7810]

Pls feed me back

[@LMAutoRepairs]

Isopropyl alcohol... Thank you for watching!

[@mirek8557]

Po prehozeni chipu do jine bsi bude imobilizer fungovat otestovane ,tak stejne jsem kdysi vymenil je chip na vadne ridici jednotce motoru do nove koupene a taky vse bez programovani klice fungovalo 👌

[@АндрейМуратов-ь9щ]

Вы не могли бы скинуть программу pego calculuatore code , которая у Вас на видео.

[@abdulganiyuhamza7810]

Pls sir help me with help me with 2003 Peugeot 307 pin out as you do in this video iam clad with this video the order model of this bsi thank sir

[@АндрейМуратов-ь9щ]

Привет из Санкт Петербурга, спасибо огромное за видео все сделал как у Вас на видео Вы очень помогли

[@abdulganiyuhamza7810]

hi iam doing thesame work as you are doing i dont know how to get the right mcu you didnt show it on your video

[@suhaibm200]

after write the vergen fill in bsi > you need program a new key ?

[@LMAutoRepairs]

Yes... Thank you for watching! 👍👍👍

[@georgefiagbedzi6780]

Please can you show me how to reset 3008 2019 bsi

[@alanblack1333]

is this video part 1 then they other part 2 the programme ing side

[@abdulhamza920]

GOOD TEACHER AFTER I CHANGE ANOTHER BSI SO I VAGINE THE NEW BSI CAN I USE THE OLD CODE TO PROGRAMM THE KEY PLS FEED ME BACK THANKS

[@LMAutoRepairs]

Once the BSI is in a blank state, you can use any valid code.. 👍👍👍

[@nkhan7804]

Please sir i realy need help i have Citroens c2 2006 & c3 2003the c2 I done key went well then car not starting again and the c3 I done mileage on the cluster and bsi but now car not starting start some some time why?

[@leogetz2668]

Ok.So what did you factory reset, blanked?? Because you stated in the video at 11:00, that ECU. I think you wanted to say the MCU eeprom of the BSi. Correct or I'm wrong. Thanks!

[@LMAutoRepairs]

Yes you are correct... at this time sometimes I would refer to modules as ECU (electronic control unit)... 😊 Thank you for watching and for your comment!

[@leogetz2668]

@@LMAutoRepairs Keep the good work up! We people have to learn to repair things again not just swap to new parts. Thank you and all the best!

[@LMAutoRepairs]

@@leogetz2668 👍

[@roy2689]

Hi, You mentioned Carprog was running out of credits, do you have to connect it to the internet to get more credits unlocked on the device, and I think you mentioned you have a way around this, how does that work? Thanks

[@LMAutoRepairs]

Hi I just program the Atmel processor with a file with 50 credits, before it runs out... That's the way round it... Thank you for watching and for your comment!

laguna 2 2003 otomatik iç sigorta kutusu bsi değişecek programlama gerekiyor mu? Direk alıp takacakmıyım?

[@georgefiagbedzi6780]

Please I need your help am having problem with replacing bsi on 3008 2019 right now the ignition comes on with the old bsi but the car can't start

[@LMAutoRepairs]

What testing have you done to deem the BSI as the problem? 👍👍👍

[@bana_n7958]

So, I have broken bsi, I read from memory, and usually need first clear file and program bsi using clear memory file. Then I need read it again, then write using original file?

[@chrisburns8787]

can you tell me what equipment i need to to read and virginize a c2 bsi and a list of the programs you use please thanks in advance

[@LMAutoRepairs]

Depends on the chip...

[@MohammedAli-mz2vl]

Hello sir. I have peugeot 206 1.6 16v 2003. Speed limit is not working. Code p0501. But the car Don have sonsor Don know how to fix it can u help me please

[@suhaibm200]

if you swap bsi . what you do ?

[@LMAutoRepairs]

You will need also the keys, and program the engine ecu... Also, you need the get the mileage corrected before plug it it, if the mileage on the replacement BSI is higher, otherwise the cluster will adjust to the highest one... Thank you for watching!

[@dansullivan1007]

Hi, I have a 2010 Peugeot 308, Johnson’s control BSI that is corrupt/faulty. I want to read the eeprom chip. It has a 95128 chip. Could you help me with where to get the software to Virginise the eeprom dump? Thanks

[@abdulhamza920]

GOOD TEACHER I HAVE DONE THE BSI REST OK I HAVE OLD BSI CODE OK I TRY TO PROGRAMM BUT THE TRANSPONDER IS NOT PROGRAMMING DO I HAVE TO CHANGE THE TRASPODER IF SO PLS FEED ME BACK THANKS

[@LMAutoRepairs]

Yes... the transponders will need to be new... And the remotes... 👍👍👍

[@taylor4niall]

If you can read the old Bsi file if faulty. Can you then just write that file to the burnished bsi as long a they have the same EPROMs. Can launch xprog 3 be used

[@LMAutoRepairs]

Yes... those tools will work, as long as they support the chip in question... 👍👍👍

[@santiagoperdomocerquera8325]

Do you have pin out for read MCU of BSI peugeot 206???

[@LMAutoRepairs]

Just look for the datasheet for the chip in question... 👍👍👍

[@aaz911]

Hi mate, my ecu data was corrupted, so had to get that data recovered and a new eeprom upload to the Ecu. Now the bsi eeprom needs to be read and then written to 2nd eeprom. Any idea what would be the easiest way for this?

[@jonwilkinson4105]

Hi is the cluster with in the bsi unit or is it a separate unit? unfortunately I did what you said an put a bsi unit in and the milage has gone up I've taken it back and put my original one back in it drives but just the locking system is broken not sure what to do next the place I went to said it's a 50 50 chance if I could ever get my milage back any help would be greatly appreciated

[@LMAutoRepairs]

Have you reset the BSI before you put it in? Looks like you haven't... The mileage is stored in the BSI and cluster... The way you drop is down to the real mileage, is by virginize the BSI, and change the mileage on the cluster to the correct one... Once you plug the blank BSI, the mileage from the cluster is transferred... so you ended up with the correct mileage on both... Obviously the blank BSI will then needs to be programmed... you will also need new transponders and remotes... 👍👍👍

[@mickymadueno6594]

good work friend but when you clone the bsa of psa that always usually fail with the time that software you used thanks greetings

[@LMAutoRepairs]

I reseted a few... never had an issue... Thank you for watching!

[@dansandman9507]

I'm looking to virginise a mk2 berlingo bsi, can you point me in the right direction to get information on this. Also are the amazon listings in your description the right tools for the job?

[@Alx-m3n]

Hello, good afternoon and congratulations on your professional and interesting contribution to your videos. I have a question if you would be so kind as to help me. I need to access the board of a control unit, it is an external tuner, of a motorcycle to be able to eliminate or release the Vin since when connecting to the motorcycle it is linked and does not allow me to use it for the other one that my father has. It is the Scream eagle super tuner model in case you know it or you can see the model on the web. I know it's possible but the person I knew because of illness is no longer dedicated to it. I would be very grateful if you could help me with something please

[@LMAutoRepairs]

Hi Unfortunately I have no experience at all with that... I would guess the vin is stored in a eeprom or mcu on the module... It might be possible to do it through some sort of interface rather than open the module... Again, I never worked with anything like that... 👍👍👍

[@mukhongolawrence5003]

Hello LM Auto Repairs, How can I find the connection points on a Valeo BSI J02 (FNR: 9651197480 A, FNC: 9651196780 A) and Valeo BSI J04 (FNR: 9651197680 A, FNC: 9651196980 A)? Can these two be reset using the Carprog v8.21?

[@mickyharkin6557]

good video,,very well explained,,,ive left a c4 bsi useless after fvdi millage correction,,,any easy ways out ??

[@LMAutoRepairs]

Never had that issue... Can you still communicate through OBD? I would suggest either reflash with Lexia or Diagbox... that not possible, get a dump from a good one, and do it on the bench... again, providing you can communicate with the MCU... Thank you for watching!

[@shadrachjoseph6380]

Please how can I learn how to vaginalise sagem ecu eeprom

[@CapuaSon]

Sorry I didnt hear what you said at the start, what is the first software your using? and what is that serial box thing you are using (do you have a video that covers this)?? Realy love your videos.

[@LMAutoRepairs]

Carprog? No, I don't have videos on this tools... But I have several using them... Thank you for watching and for your comment!

[@CapuaSon]

Was it Carprog???

[@LMAutoRepairs]

@@CapuaSon That's what I said...

[@MrFOXMAROC]

can u test if really the FVDI kills the BSI jhonson or not please .

[@LMAutoRepairs]

Hi I never tried it... but people says it does... at least the clone one... Thank you for watching and for your comment!

[@MrFOXMAROC]

@@LMAutoRepairs some says that u need just to keep the battery voltage above 13V

[@LMAutoRepairs]

@@MrFOXMAROC For any programming etc... a charger needs to be connected....

[@MrFOXMAROC]

That's true, i would like to thank u for the effort that you put to produce those videos.

[@LMAutoRepairs]

@@MrFOXMAROC Thanks... more to come...😉

[@sagiriliyasuadamu3341]

Thanks for another great video, I learned a lot from your videos and I have been searching for this type of video on how to virginise bsi, you actually make my day.

[@LMAutoRepairs]

Sagir ILIYASU ADAMU Thank you for watching and for your comment! Glad to know it was helpful...

[@catoforberg]

have cardprog to clone bsi body computer, and I ask you about you can tell me about eeprom 95128, its only this I need to copy over too my new bsi body computer? The car is peugeot 3008 1,6 hdi models 2010

[@marocautofix5555]

Do you have toyota avensis immo virgin file?

[@LMAutoRepairs]

Don't think I do...sorry... Thank you for watching!

[@draganmilosevic2278]

Hi, nice video... Tell me have you pinout for valeo bsi cn4, xsara 2. Best regards

[@robbocop33r12]

Would xprog be able to copy my original fiat doblo BSI and write that to a used BSI?And after i do this will my keys etc still be recognised?Thanks.

[@LMAutoRepairs]

Yes... But as for if X-prog will be able to do it, check what MCU or eeprom you have on that particular BSI... just to be sure that X-prog does support it. Thank you for watching!

[@robbocop33r12]

@@LMAutoRepairs I actually posted my problem on another video but i cant find it.I replaced indicator relays on my bsi pcb.My original problem was right side indicators werent working on my fiat doblo.I replaced both relays with used ones,when i connected everything keys weren't recognised by the car and 'both' sides then didn't work? Made progress today,got two new original type relays from China,now i am getting outputs from bsi to both sides now!But they are flashing quickly and front indicators on bith sides aren't working?? It's slight progress but keys still aren't recognised?

[@abdulganiyuhamza7810]

Good teaching I having watching this video for long time pls sir how do get the software ecu vonix pls give me the link thanks

[@TheMinister2000]

Hi! I have BSI from C3 I that wont go to sleep and empties the battery in 3 days. Everything beside this is ok with the car. I think to buy s/h BSI with same number and swap it. Can you simply tell me the steps I need to do to put the s/h BSI in and keep the ECU and keys? Or maybe other suggestion to fix the drain problem? Thanks!

[@LMAutoRepairs]

Check the drain by testing independent circuits... It might be that there is nothing wrong with the BSI, and is something else that is preventing it from going to sleep, and replacing it will not fix the problem... Thank you for watching!

[@donamoskola4761]

Where is located on the car the BSI (that you are resetting) on a Citroen C4 Grand Picasso 1,6 HDI ,year 2010 diesel ?

[@LMAutoRepairs]

Usually under/behind the glove box... Thank you for watching!

[@ervbon7493]

Would A Diesel BSI work in a Petrol?

[@LMAutoRepairs]

Possibly... If programmed accordingly... Thank you for watching!

[@johnnycash2627]

Hi mate! Can you possibly help with yr. 2000 2.2HDi Peugeot 607 BSI module, it is a Sagem module and it has a chip: Infineon SAK-C167CR-LM. With what tools it can be flashed? Please help....

[@LMAutoRepairs]

Does it not have an external eeprom? What exactly are you trying to do? Thank you for watching!

[@johnnycash2627]

@@LMAutoRepairs I am trying to virginize this BSI... Hmm... so resetting the 93C66 chip will do the job? Or do I have to get connection to that Infineon?

[@LMAutoRepairs]

@@johnnycash2627 The eeprom should be enough...

[@johnnycash2627]

@@LMAutoRepairs Many thanks :) I discovered your channel quite recently and I must say: Great work, dude :) My Peugeot is displaying "Changing to power save mode", the user functions are pretty much dead and the car will not start(it cranks normally). Let's hope, that brand new configuration of the BSI heals it :) I will do some videos as well and share it with ya all :)

[@johnnycash2627]

Hi again! :) Yes, the EEPROM reset worked fine :) But there is one more problem... How will I know the build code, if the stickers are destroyed... Can it be taken from somewhere else? Thanks!

[@abdulhamza920]

GOOD VIDEO I HAVE A QUESTIONS FOR SIR FIRS CAN I USE THIS METOD FOR ALL PEGEOT BSI IF SO PLS FEED ME BACK THANKS

[@LMAutoRepairs]

Kind of... different BSI slightly different methods... 👍👍👍

[@estrikadev9554]

do i really need to virginize my second hand BSI? i collected my PIN from ecu using galletto. Can the galletto be used to virginize the BSI instead of carprog? i will use Diagbox to program new BSI, can Diagbox handle the not virginized BSI to program?

[@LMAutoRepairs]

Hi You need to virgin the BSI before Diagbox can do anything with it... Thank you for watching!

[@estrikadev9554]

@@LMAutoRepairs not having a programmer to read/write the bsi, soldering a new eeprom will do the trick?

[@StatusFIX]

I take it , that's an early version of carprog? having to reset the counters.?

[@LMAutoRepairs]

Yes... it is... I need to flash the atmel chip before reaches 0 credits... Thank you for watching and for your comment!

[@Tersten.2.3.4]

You are doing copy from knowed bsi key code then all the software it is right? Code is same the programmed all bsi?

[@LMAutoRepairs]

No... each BSI or car will have its own code...

[@cristovaonunes4952]

Olá Hello I'm thinking about buyin a programmer what do you think is the best Orange 5, xprog or tl866 ?? I have carprgo 8.21 and the cheap ch431a ... thinking about be able to read and write eeproms remap edc15 with the big sop44 flash and plcc32 and also be prepared to do some immos and BSI(like that).... thanks in advance

[@LMAutoRepairs]

Hi I am a bit biased, and to be fair, I only ever used X-prog, from list you gave... X-prog is quite complete... can't really go wrong with it... 👍👍👍

[@gonzaloamat1122]

Hello and thank you very much for all the infos you´re sharing. I have the same BSI. Original + another 2nd hand one. I`m trying to read it with the same tool "CARPROG" but it doesnt read... I dont know why. CARPROG has been used before and its working... What could I do? Is it absolutelly neccesary to have the PIN when instaling a Virgin BSI with peogeot PLanet?

[@LMAutoRepairs]

Yes... you need the pin... Thank you for watching!

[@longfieldcommercials]

You are braver than me good video, question, can you replace central locking relay, as me seems to be faulty, Peugeot 206,2005,1.4 hdi.

[@LMAutoRepairs]

Hi I can't see why not... Thank you for watching and for your comment!

[@talbejerano8721]

Hi LM auto I have a 2008 citroen berlingo 1.6hdi, the AC clutch isn't engage. I have use Lexia to check and got an error that the is "ac short to ground" when checking the bsi unit. Before I open the bsi box , could you give any advice where to look for the short on the bsi pcb?

[@LMAutoRepairs]

I would check the circuit between the AC pump and the controller module... if it is the BSI... before blame the module itself... Or, even the pump itself!... 👍👍👍

[@talbejerano8721]

@@LMAutoRepairs Thanks for your prompt reply. 1. I guess you talk about the BSM which is the fuse box in the motor compartment. Checked and even replaced. 2. New compressor + clutch assembly replaced. 3. Harness between BSI & BSM fully cheched and confirmed Ok. 4. Circuit from AC switch and AC blower checked and confirm Ok. 5. BSI left to be repair imho. Lack of finding an electrical drawing led me to seek help from experts like you.

[@LMAutoRepairs]

OK... what about the harness for the compressor? Have you checked that?

[@talbejerano8721]

@@LMAutoRepairs Harness checked all Ok. From BSI to BSM From BSM to COMPRESSOR. I injected 12v to the wire to compressor and it egaged and AC worked Ok. To sum the overall checks it obviously the BSI. but ad I said early, I have no clue which circuit on the BSI is the culprit. Thats why I ask your help. My hope you will give me a hint where to look for.

[@LMAutoRepairs]

@@talbejerano8721 OK... So, if the fault is a short to ground, you should be able to open the module and trace the circuit down... You should either have a mechanical relay that engages the circuit, or a mosfet... Look for that short...👍

[@AbdulGaniyuh-x5j]

Hi bros than for that video pain my country we all ways have problem with this bsi no com with string colm the will not start my question is this pls make a video with no com and power and grand is OK van not comunicating with streing colm pls feed me back thanks

[@philipkeogh748]

You do fantastic work lad you are the man for C4 picasso I have a question you may be able to help me,2015 c4 1.6 hdi, warning came up for low additive (Pat)fluid fluid was topped up but code won't clear so went and bought new tank and pump programmed them in fault still there,the fault of is cleared out of all systems except the BSI it won't clear from it comes right back every time,any ideas lad

[@LMAutoRepairs]

Hi Difficult to tell... What fault is coming up now exactly? Does live data shows anything out of the ordinary? 👍👍👍

[@philipkeogh748]

@@LMAutoRepairs engine repair and service light,multiplex pump fault is in BSI and won't clear comes back every time,a new pump and additive tank have been fitted and programmed in no codes anywhere except pump one that won't clear

[@LMAutoRepairs]

Can you communicate with the additive pump?

[@philipkeogh748]

@@LMAutoRepairs yes it knows new parts are fitted but been french as you know you have to clear from all ecu's before fault will clear but comes right back it's put the car in semi limp mode won't drive in auto only paddle shift but also under powered I'm told this is a protection thing,anyone I have asked in Ireland about Lexi software they say no don't have ,wiring checked yellow wire is live not sure witch is data wire Back to bci green or green with yellow strip,all working in back of car have been checked would it be bc is itself lad do you think,and thank you so much for taking the time to reply to me

[@fadialhalabi2572]

Tanks agen to thes amazing videos. From where did you get the pic of Bsi connection to carprog?

[@nicholi100]

hi love you videos great job, have a question.. have two bsi boxes veleo GOX-00 ONE IS BAD BUT I HAVE THE PIN... THE OTHER IS GOOD BUT I DONT HAVE THE PIN CODE....... CAN I SWITCH AROUND THE EEPROM CHIP AND I WOULD LIKE TO KNOW THE WHICH CHIP IS THE EEPROM THE CHIP NUMBER

[@LMAutoRepairs]

Hi I believe that on that one is an Motorola MCU... no external eeprom... So a bit more tricky to swap... Thank you for watching!

[@zoranconjar6815]

Dear Sir, I have a problem with Peugeot Boxer van 2011. The only key I have broke, I'm not the first owner of the van, so I don't even have a card with the code for making a new key, but I can read the ECU, do you have a program with which I can read the codes for making a new key? Thanks in advance for your reply.

[@LMAutoRepairs]

To read the pin code from that depends on the ecu... what tools do you have to read the ecu? Do you have how to program a new key? 👍👍👍

[@zoranconjar6815]

@@LMAutoRepairs UPA USB v1.3 programmer to read ECU, To add keys would use OBD Delphi car diagnostic. ECU is from Mageti Marelli in Boxer.

[@LMAutoRepairs]

You need to get hold of the pin by reading the data...

[@zoranconjar6815]

Do you have the knowledge and experience of the name of the program that can do this?@@LMAutoRepairs

[@ervinhodo9908]

Nice video , I have couple questions about doing bsi and ecu , could you recomend me some diagnostic tool wich i can use i would really apreciate it since i cant make a choice wich one can help me out

[@LMAutoRepairs]

Depends what you want to do... you have seen the ones I have used here to do this work... Thank you for watching and for your comment!

[@ervinhodo9908]

@@LMAutoRepairs well I've wached you used carprog for bsi and xprog for ecu thats the part thats confusing me

[@LMAutoRepairs]

@@ervinhodo9908 X-prog should help you... There is other eeprom/mcu programmers out there, like the Xhorse, orange, etc... depends how much you want to spend...

[@ervinhodo9908]

@@LMAutoRepairs can it be done with obd port without the soldering you mention that in a video

[@LMAutoRepairs]

@@ervinhodo9908 This one... www.obdexpress.co.uk/service/psa-bsi-tool-for-peugeot-citroen-software-and-operation-free-download-136.html If you find one... But I never used it... so can't really comment how good it is...

[@Lee3R11]

Hi. After reseting the BSI, it van be paired with the ECU id The BSI was not from another car?

[@LMAutoRepairs]

Yes... Well, after programming... Thank you for watching!

[@Lee3R11]

@@LMAutoRepairs thanks for The answer! So I reset The BSI and Then enter The access code in BSI, which is stored in the engine ECU?

[@LMAutoRepairs]

👍

[@Lee3R11]

@@LMAutoRepairs thanks for help! You're doing A great job!!

[@Lee3R11]

Hi. Have You ever made A 2.0 Hdi 90hp SID801 engine chip? Do You have a video recorded somewhere?

[@grupoportugalgeteasy7975]

Hello from portugal mate. Can you make a vídeo where we can get the equipment you use. Hardware and software? Also some tips for begginers. I like your vídeos. You are great. It would be nice to have a vídeo of telling how you start learning all this stuff .

[@grupoportugalgeteasy7975]

Tell us your professional story mate

[@grupoportugalgeteasy7975]

By the way my name is Ricardo Alves 😊

[@LMAutoRepairs]

@@grupoportugalgeteasy7975 O meu é Luis Mateus...😉

[@LMAutoRepairs]

I learn as I go along really... I have no background on anything to do with cars... 👍👍👍

[@nkhan7804]

Hi sir im problem with my bsi modul for citreon 2006 c2 after pulling immo eprom not getting comunication from bsi why?

[@LMAutoRepairs]

How did you read the eprom?

[@nkhan7804]

Yes I read the eprom to the pincode to code key that's all was getting coms but not showing vin anymore on my lonsdor

[@nkhan7804]

With vvdiprog desolder it

[@nkhan7804]

I unsolder the 95160 eprom from bsi then xtracted it normal then I use lonsdor to code key lonsdor accept pincode but it don't show the vin number cos the first time I tried it I did pull vin but after takeibg bsi eprom im having issses

[@67KeTur70]

Hi, How do you know the correct mcu model? And is it possible to know if it's a eeprom or a mcu? thank you for all you doing

[@LMAutoRepairs]

The model or mask is written on the chip itself... Thank you for watching!

[@67KeTur70]

@@LMAutoRepairs Thank you for your fast answer, you're the best!! I have a 307 (2002) with lock button flashing and the car wouldn't start. I think the problem come from the BSI... I will try to virginize the BSI and program it.

[@harwoods11]

Hi Interesting video. I have 307hdi that had the neg battery terminal corrode away. I replaced battery and terminal..reset everything now all works but front wipers and resetting day/date on facia. Is this a bsi fault? The wipers certainly seem to be??

[@LMAutoRepairs]

Hi Check basics first... Fuses etc... You can gave a better idea if you check it with the scanner connected... so you can look at some live data etc... Thank you for watching and for your comment!

[@harwoods11]

@@LMAutoRepairs Hi Replaced com switch and checked wiper operating.. All OK. Replaced underbonnet fuse box and check operation.. All good there. Just seems odd that the bsi spiked on the wiper control?

[@LMAutoRepairs]

@@harwoods11 Ok... It might be the BSI... One thing, have you applied 12v directly to the wiper motor? Does it runs?

[@harwoods11]

Hi Thanks for reply. Yes.. The wiper motor works when connected from an outside power supply. Is it poss to fit a second hand bsi?

[@LMAutoRepairs]

@@harwoods11 Hi Yes... but needs to be virginized first...

[@julespatch]

brilliant mate thank you. gonna try the clone method tomorrow. cheers!!!!!

[@LMAutoRepairs]

👍👍👍

[@leehazard5225]

Does anyone know where to get virgin dump files? I need one for my Peugeot 406’s BSI. Also, does anyone know what software is used to read and edit the mileage on these files, I messed up my mileage and now need to correct both the BSI and instrument cluster.

[@pavelmanolov3158]

If i read the pin from old BSI and program the new (2nd hand) Ecu with the same PIN like BSI , if will runs everything normal? (i use the same soft like you) The old ecu is destroyed and haven't got way to get the info from there :(

[@LMAutoRepairs]

You need to virgin the replacement, end then program it with the car pin... Thank you for watching!

[@georgeclarke1183]

how easy is it to reprogram a virgin bsi

[@LMAutoRepairs]

Look on my channel... I have a couple of videos for that... 👍👍👍

[@pelican7481]

Hello mate, can I use ktag instead of carprog? Guess it makes no difference right?

[@LMAutoRepairs]

Not really... K-tag is designed for engine control modules... You need an eeprom or MCU reader, depending on which module you are working... Thank you for watching!

[@pelican7481]

Working on a Citroen relay bsi. I’ll probably by a clone carprog or do you know of a cheaper option as it’s probably gonna be 1 time use.

[@LMAutoRepairs]

Not sure of any cheaper options... If there is an eeprom on it, there is cheaper... if you need to read a MCU then not really sure...

[@pelican7481]

@@LMAutoRepairs Thanks mate. Just found out my bsi ok and it was the ignition that was messing up. Just a quick question. Is there anyway to do Immo off with diagbox or maxisys through obd if I have the key code or do I need to do it through the ECU. Is there a way I can check the type of transponder in the key because I’ve got the glass type in my key, but everywhere check for a 2007 Citroen relay transponder, it shows as IDT46 which is not the glass type. Are they interchangeable? Sorry for the multiple questions and many thanks 🙏 for your help.

[@LMAutoRepairs]

You can't immo off with diagbox... if you have the pin code just program a new key... The glass transponder used on those, from 2002 to 2006 is the ID48 T6... yours might was registered in 2007, but might was manufactured in 2006... That's the glass transponder for those... 👍👍👍

[@electrolineservicegreece8267]

Luis ... Do you think Ktag could do that kind of job ?? you use carprog and so the wiring pin probably be different ..

[@LMAutoRepairs]

Hi K-tag is not for this type of work... Thank you for watching!

[@egri_ervin]

Hi! Can you share a link where the BSI cloner can be found?

[@LMAutoRepairs]

I would have to Google it... but you can also do it yourself... Thank you for watching!

[@egri_ervin]

@@LMAutoRepairs Thanks for your answer. I searched for it on Google, but didn't found any BSI tool that can be bought. Can you send a link from where you ordered yours? Thank you much!

[@mecatronicfirstly]

Hi Mr, how ca i find any egr off or dpf off or immo off files, thanks

[@MdShahin-nm7xw]

What version your carprog? Is it online version?

[@LMAutoRepairs]

Hi No... my one is an older one... not the online one... Thank you for watching!

[@claudiunic7951]

Hi Can you supply the pin code Peugeot e-Expert 2021?

[@LMAutoRepairs]

No...

[@alanblack1333]

can u not just take they original eprom off and soldier it on the new bsi ?

[@LMAutoRepairs]

Depends on the BSI model... Thank you for watching!

[@ambrozmlakar8714]

Hi, could you get the pin code from the ecu bin file? peugeot 807 2004

[@LMAutoRepairs]

Go on my forum... 👍👍👍 Thank you for watching and for your comment!

[@roberthorwat6747]

I have done it from the bin file from a 206 BSI... but it's a real ball ache. The software used here is a zillion times faster than the time it took my feeble brain cells to wrestle with the hex codes and then squeaky bum times programming the key in case my hex to ascii calculation was wrong... but it worked! Not sure I'll use that method again when there is a software solution like this though.

[@mustafaborini1030]

hello my friend, did u tested the bsi after virginize it? and how can we put the new pincode or it just take it from ecu? or must virgin ecu too? regards

[@LMAutoRepairs]

Hi Read the description of this video... Hope that helps... Thank you for watching!

[@georgigospodinov1986]

Hey, i have a question. My BSI is blank. And i want to ask, if i only change my BSI and keys from another car, will it start, or i have to change the ECU also ?

[@LMAutoRepairs]

Hi You will need ecu as well... Thank you for watching!

[@tronicsdigital9056]

Hello,very owesome video i am learning new things from your teachings keep up the brilliant work.

[@LMAutoRepairs]

tronics digital Hi Thank you for watching and for your comment!

[@donovanbent3716]

Hi are you not able to access the pins via the connector, so that you don't solder on the board

[@LMAutoRepairs]

Donovan Bent Hi Not really... for that you do it through the OBD port... but that is a different tool...

[@thomasadmiral3401]

Hello!- Can you help me?- My problem:I read my BSI pin code with FVDI, but died something. This is berlingo B9. no ignition,dark my dash now. My BSI goes eco mode or died? Have you idea what it is?--thank you so much

[@LMAutoRepairs]

thomas Admiral Hi Was that a Johnson Controls BSI?

[@thomasadmiral3401]

yes :(

[@LMAutoRepairs]

thomas Admiral Unfortunately you might be in a bad position... There is reports that FVDI corrupts those BSIs... www.fvdiobd.com/fvdi-experience Can you try to virginize it and then reprogram... Have you lost communications with it?

[@thomasadmiral3401]

yes,,don't see interface the bsi and the motor ECU too!-possible fuse problem? I don't save the bsi dump file,I have nothing.......hmmmm. I read a lot of idea,possible gone bsi safe mode?-thanks

[@thomasadmiral3401]

And now deleted the eeprom in my bsi?.If i open it BSI and read the chip?-can I read something?

[@talbejerano8721]

Hi LM Auto After my question about fixing the BSI AC problem (Not yet fixed) I made an horrible mistake (NOT listening to your warning about the mileage) and borrow an old BSI from a friend and connect it to my car which result with +40K to the car cluster. from 160K Now it show 200K :(. Is it possible to reduce it to the lower mileage ? I have PSA Planet + Carprog in hand. I can get any software for this mission if needed.

[@LMAutoRepairs]

You need to remove the cluster and do it in there... Put the cluster to zero miles, or anything below the original miles... Once you connect your BSI again, the miles will correct... Unless you have already plugged your original BSI back in... which in that case, you made it worse.. and you need to modify the mileage on both now, the cluster and the BSI... I can't remember wich chips are in those modules... but once you open them you will see.. Good luck... 👍👍👍

[@talbejerano8721]

@@LMAutoRepairs Thanks mate. As I understand there is an eeprom chip there? If so NP.

[@LMAutoRepairs]

Yes...

[@shlim9555]

Hi, could you share me the software that you are using to read data and calc. the Peugeot pincode? I need to add key for 2004 Peugeot model 206. I am also looking for the connecting wires that you are using.

[@LMAutoRepairs]

Hi Do you have X-prog or a similar programmer?

[@fern250]

well explained...and another best video as always..thank you bro..

[@LMAutoRepairs]

😊 Thank you!

[@MrLeofezollari]

Hi Mister You say on your comments : "There is tools out there that can do this through the OBD port, which obviously is more practical. " How to extract the PIN code from ODB2 port. I have Lexia3 cables and Diagbox program, can i do with them or is needed any other app ?

[@LMAutoRepairs]

Lexia is the OEM tool... Will not do it.. Look for PSA tool... rare to find though... Abrites is another option... but horror stories out there... Thank you for watching and for your comment.

[@MrLeofezollari]

@@LMAutoRepairs were you able to find and test someone of this apps ? The dealer extract the PIN code from VIN number ?

[@LMAutoRepairs]

@@MrLeofezollari I believe they have them on a database...

[@TheMatrixcube]

So say i followed exactly the steps you did in your video iv read the chip saved the file and want to calculate the key but it is of a citroen not a peugot do is use peugeot calculator or one for citroen?

[@LMAutoRepairs]

TheMatrixcube Ah got you... yes there is... Google will easily help you find them...

[@TheMatrixcube]

lmsvvavr Thanx man i learn from your video,s +++ You deserve more subscribers!

[@LMAutoRepairs]

TheMatrixcube Thank you for watching!

[@davedree]

hi brilliant video, could i ask some advice. I have a 2001 406 hdi 2.0 estate and the bsi has burnt out on a couple of tracks i repaired them but i still have lost dash service indicator and mfd, the wipers and central locking. Car did start and run with these faults but it now only turns over cranking. Would i be best off trying to find a 2nd hand bsi and virginizing it, then inputting using planet2000 the vin and pin that i got from peugeot?

[@LMAutoRepairs]

davedree Hi You can do that... should work. You can try to take the pin from your actual BSI... providing you have the tools... Good luck...

[@autosport3081]

Does the same thing apply if you would like to replace a Peugeot/Citroen Engine ECU ,so that you can keep the same BSI and Key?

[@LMAutoRepairs]

Auto Sport Hi Pretty much yes.... But depending on the ecu, and providing you have access to the data on the old ecu, it might be easier to just clone it... saves you all the mess about with PP2000... Thank you for watching!

[@paullee6406]

Great video, loads of info. Could you help with wire install for citroen picasso bsi have carprog maybe clone, where can i find wire colour codes so i can solder onto 95160 eeprom

[@LMAutoRepairs]

paul lee Hi If the eeprom is accessible, better to remove it, do the work and put it back on... With car prog, you have some documentation that tells you what wire colour is what... from there you need to know which bsi you are working with... Can you access the eeprom?

[@pawellewicki2607]

Hi can you help with connection for 307 bsi valeo gox-00 pinout? Have unside mcu or eeprom ? Thanks

[@LMAutoRepairs]

No sure... Open it and check... 👍👍👍

[@pawellewicki2607]

​@@LMAutoRepairs I try read like you the board Look this same But carprog read Just 00000 . Somebodys before me try program key after the batery discharge so iam not sure Hi erase eeprom or i have wrong conections

[@pawellewicki2607]

Any information will help

[@abdulganiyuhamza7810]

PLS THE CAR PROG ADAPTER YOU USE IS A10 ADAPTER OR A4 EEPROM PLS TELL ME THE ADAPTER YOU USE PLS FEED ME BACK THANKS

[@LMAutoRepairs]

Carprog does tell you which one to use... if I recall correctly...

[@jdean399]

Hi, great stuff, what else can carprog do? Thanks Jonathan

[@LMAutoRepairs]

Jonathan Dean Hi Airbag reset, some ecu pin read... etc... Thank you for watching!

[@jdean399]

Thanks, could you also tell me, will the zed bull key programmer tell me the pin code for a car key? I have one key, but would like one more cut, but I don't have the key pin, it is a peugeot. Thanks again Jonathan

[@LMAutoRepairs]

Jonathan Dean Don't think it does... Do you have how to programme the new key? Thank you for watching!

[@jdean399]

LM Auto Repairs Thanks, yes I need to program a blank key, I have one working key, with the zed bull do it? Thanks again Jonathan

[@lkim08]

Hi, good video, do you have problems with the colours of the carprog wires not being the same on the clones or did you buy geniune plugs so the colours match up to diagrams hope this makes sense cheers lee

[@LMAutoRepairs]

lkim08 Hi Yes it makes sense... My carprog came with the correct wire colors... At least when compared with the pdf files that came with it...

[@tinochoolun4397]

hi is it possible that when removed the immobilizer on a peugeot 307 the air cinditionner did not works? thanks for a reply tino

[@LMAutoRepairs]

tino Choolun What do you mean, you have removed the immo from the engine module?

[@fychy]

Hi, Very good Video! I have a few questions for you : Can I read the eeprom with an universal programmer?for example I have a Mini Pro TL866A.Can I read it with this programmer?Can I connect the wires like your connections?Will it work?

[@LMAutoRepairs]

Hi It all depends on the bsi... some have an eprom, and some other ones have an MCU... They are read differently... Thank you for watching and for your comment!

[@fychy]

@@LMAutoRepairs Hi, If I take the eeprom or mcu out from the board and I read it with my programmer,the resulting bin file is good? Or it must be readed with special tools?thank you!

[@LMAutoRepairs]

@@fychy You can do that... 👍

[@MrSkimmer06]

tanks to you,today i read my first bsi

[@LMAutoRepairs]

WoW Congrats! Thank you for the feedback!

[@Kasmort0206]

How do you know where to connect each wire on the bsi?

[@LMAutoRepairs]

Kasper Mortensen Hi I have diagrams and photos showing the connections... Thank you for watching!

[@Kasmort0206]

LM Auto Repairs thank you for your answer. does the diagrams come with carprog?

[@LMAutoRepairs]

Kasper Mortensen Some yes... not sure about this ones... but I can share them with you... Just consider checking my patreon...

[@Kasmort0206]

LM Auto Repairs i checked your patreon, but i don’t really understand what it is. Do you share diagrams and so on in there?

[@LMAutoRepairs]

Hi Yes and no... Have a look at this... kzbin.info/www/bejne/poXZnHRsf9ejj6s And this... kzbin.info/www/bejne/oZKQiqWcociXY9E Thank you...

[@tinochoolun4397]

hi imswavr yes we removed the immobilizer using immo killer s/ware

[@LMAutoRepairs]

+tino Choolun OK Does the car have climatronic? Without checking diagrams I am not sure, where the signal to engage the AC pump comes from... if from the engine ecu, climatronic module, if fitted, or bsi....

[@pcjodel306]

Hi! Could you help for a non responsive speed indication while the data can be read on the KAN bus but simply is not put out by the BSI? Peugeot 406 SV 2.0 HDI 1998 BSI D9 B4. Tell me how to get in conact zjx.

[@LMAutoRepairs]

Have you considered the the cluster? Can you test actuate the cluster?

[@tinochoolun4397]

hi imswavr a bsi is fitted and the ecu is a sagem s2000 thanks to advised tino

[@axakias]

I have a citroen berlingo 01 model multispace and my key remote stop working.I changed the battery but no luck.I bought another new key remote, i programed the immo it works ok and it starts the engine but it can't be sinchronized with the bsi..... any thoughts?

[@LMAutoRepairs]

axakias Maybe the problem in on the car... Have you checked that the car is detecting the key signal? Thank you for watching!

[@axakias]

How can i detect the signal? Through lexia? That would be a great next video....