"ready to install right out of the box" Yea right!
@CoastalAutoReactionCAR6 жыл бұрын
Only watching cause K.T. Is the presenter one of the best!
@jimleslie136 жыл бұрын
1985 Chevy pickup how to install wheel well liners
@jimleslie136 жыл бұрын
How to install wheel liners
@MrJoeGarner6 жыл бұрын
Like the use of the rubber tubing. Very informative video, this will help with wood as well. I will be installing a wood bed in my 65 GMC.
@mrjata6 жыл бұрын
Thanks LMC, placing my first order soon for the floor pans and rockers for my '60 C10. Kevin is a huge help and a great spokesman for LMC. A true craftsman.
@jeffreybarnes7772 жыл бұрын
Fantastic Video!!! Beautiful Bed Kit!!!
@rangerjoesresurrections28245 жыл бұрын
If LMC could engineer the boards with stock bolts and stock bolt location, one wouldn’t need a “buddy system” and 3 days 😂 to install??
@scottcooksey5284Күн бұрын
Exactly. Then they could actually advertise it ready to install and be truthful about it.
@stevegleixner39826 жыл бұрын
Cool video, and very informative. This kit should be made available for the 73-87 Chevy. If it is, it's not in the catalog or on the website.
@b83mcley6 жыл бұрын
It looks like these guys do custom sizing. www.smokeyroadrodshop.com/
@Heepings6 жыл бұрын
Would love to see this bed kit be available for my 77 Chevy C10 Stepside!
@johnathanreigard5123 жыл бұрын
Wow looks fantastic!
@marcoaguilarjr5066 жыл бұрын
love it! thank you. Really Great work 👍
@izzynutz20004 жыл бұрын
I had a 57 Chevrolet 1-ton panel van that I had to redo the floors in making and routing my own boards that I don't think we're as hard as this... Nor as expensive
@adriantomlin29025 жыл бұрын
I have chromed rub strips in my bed. I think they look better then polished strips!!!
@myrondesjarlait97523 жыл бұрын
Use self tapping screws to make pilot holes. They're cheap, don't walk as much, and save your drill bits.
@tonysantana14936 жыл бұрын
Beautiful!!!!
@jamesconner4894 жыл бұрын
LMC said they’re not selling this kit anymore
@luisalvarez54392 жыл бұрын
How do you install bed to frame?? Since on the original wood you go through the wood to install to frame..
@carlsapartments89316 жыл бұрын
interesting product, thanks.
@verygood71555 жыл бұрын
Great stuff!
@SleepyUncleSam5 жыл бұрын
Why didn't they just build the panels the factory width, would be alot easier install
@adriantomlin29025 жыл бұрын
Yea I don't get that either!! Especially for the amount of damn money they want for this kit!!!
@journeyquest13 жыл бұрын
@@adriantomlin2902 These high dollar fades are here today, gone tomorrow.
@automaniacUSA4 жыл бұрын
Went to LMC website. No listing for a 49 Ford F1 short bed Wood Floor kit. Why?
@JasonPittaro9 ай бұрын
Can this floor be laid over the factory bed floor??
@markeastwood75511 ай бұрын
That's a great product, but no way I'm drilling all those holes. You should made factory sized panels
@luisalvarez54392 жыл бұрын
How do you bolt bed to frame with this kit??
@charlessantiago10826 жыл бұрын
Would the years change the bed on stepside. Is 60-66 the same as 67-72?
@house9850 Жыл бұрын
Anyone know if you can get something like this for a van floor?
@ninerfaithfull4life7823 жыл бұрын
Looks nice but can it hold some weight 🤔
@jeffcampbell27102 жыл бұрын
It looked delicate. They even handled it like it was. 10 minutes, a 5 year old boy, I mean a boy, not like we see so much of today, his cowboy boots, and him jumping around, would probably look like a hail storm came. But, I'm only guessing. But, the look just isn't wood. Looks like those vinal boards for decks. I think those would work, and be tough as nails.
@frankcastle38272 жыл бұрын
I'm curious on how much it would cost for my truck
@travismcminn98156 жыл бұрын
Love the wood grain. I say no to chrome.
@jasonkraus28316 жыл бұрын
Hey LMC - Guys, why don't you re-pop floors for 66 Ford Styleside trucks? There are hundreds of these around and nobody makes one. You have bunches of guys like me that are going to have to jerry-rig a solution that works for our old trucks where the bed is too damaged/rusted for use. I've got two '66 beds and I'm less than three hours from your corporate headquarters. You can swing down and take any measurements you need to see if you can make something for us. If you can do it, you'll sell a few hundred of them quickly because there are bunches of us trying to figure out what to do.
@ethanedler25536 жыл бұрын
I have the same problem
@jasonkraus28316 жыл бұрын
I've actually started a series of videos on what I'm doing to replace mine. I need to film another and get it posted. If you click my name it should take you to the list of videos where I describe what I'm going to do and I show some progress on how it's going. Don't worry about subscribing or liking or anything, I just want to help others figure this out too. If you watch and have some suggestions do not hesitate to leave them on the pages.
@ethanedler25536 жыл бұрын
Sweet I'll be sure to check them out
@jeffrey45475 жыл бұрын
i can get a nice 66 ford project truck with the matching box cheap from my friend just i have to many projects all ready and many more fords chevy's and dodges if some one wants a project car lot of them have no rust in them good body's the 68 chev i got from him was perfect no dings or body work still had the factory paint on it i got for 1000 with built 327 all matching # but i am putting a stroke 454 in it that i got from him for 500 with tunnel ram any body that builds cars need to check this guy's place out a lot of trucks he sells for 200 / 500 and they are well worth it
@loudlife76484 жыл бұрын
Seems a bit lazy of the manufacturer to not engineer it to use stock mounting holes. Ridiculously overpriced for something not designed with the consumer in mind...
@jeffvw19945 жыл бұрын
$1800 for the kit for my 72 gmc sound like too much money.
@adriantomlin29025 жыл бұрын
jeff vw That is alot of deniero for that fake shit?! Wow!!!
@karlsmith25704 жыл бұрын
@@adriantomlin2902 maybe so, but it lasts a lot longer than actual wood planks that you'd have to to put on a sealant and finish on all sides of the planks
@Hotrodt663 жыл бұрын
Do they make this for 76 f100 my bed is rotted out inside
@Lmctruck13 жыл бұрын
Hello, we don't offer this particular product anymore but we do offer repair panels for your bed. Please check out our website.
@ericbritt8227 Жыл бұрын
cant find these on LMC site.
@MF-kj8cx6 ай бұрын
same here as of 3/27/24; must no longer offer
@lorenavalenzuela35726 жыл бұрын
Nice looking but I think is a little Expensive
@Austinchaynes6 жыл бұрын
Traversebean2 Bmx not when you factor in that you may have to refinish or replace regular bed wood twice or 3 times during this ones life span. And you don’t have to baby this like you would regular wood if you want it to look good
@adriantomlin29025 жыл бұрын
You don't have to baby the wood in the bed of was probably finished!!
@adriantomlin29025 жыл бұрын
If it was properly finished I mean.
@karlsmith25704 жыл бұрын
It may cost more than a wood bed in the short term But, when you factor in the fact that you are a lot more likely to have to replace the planks after a certain amount of time, adding in the whole process of finishing the planks top, bottom and edges It's a lot cheaper in the long term
@carlodioso4955 жыл бұрын
Is it okayy from rain?
@Lmctruck15 жыл бұрын
Hey Carlo_boy, our aluminum bed floors are made of aircraft-quality. Making them durable and weather resistant with minimal expansion compared to wood.
@carlodioso4955 жыл бұрын
@@Lmctruck1 so it is not a real wood? It not came from wood? Sorry for my bad english...
@Lmctruck15 жыл бұрын
No sir not real wood, this bed floor features a beautiful real wood grain pattern without all the real wood issues.
@journeyquest13 жыл бұрын
A sheet of black diamond plate would be cool instead of all the high dollar PITA BS.
@jeffcampbell27102 жыл бұрын
"How did you wood get all those dents in it?" "My kid had his cowboy boots on and was jumping up n down in it" It looks good, but it's impossible, so far, to duplicate the look of real wood with a printer. And it will bend, and dent, I'm guessing not to hard either. The weight issue is good if you race it for sure. .
@GiorgosC-rp5ms4 жыл бұрын
yea i will stick wit my tin roof
@JonPYbanez3 жыл бұрын
40 hours of drilling later...
@kevinwallis21943 жыл бұрын
I went to the site and couldnt even find it.
@Lmctruck13 жыл бұрын
Hi Kevin, We're sorry but we no longer offer this product.
@adriantomlin29025 жыл бұрын
Why do you need a rubber gasket and worry about scratches when it's hidden??!!
@mukunet3 жыл бұрын
Why wasn't this video done with a Stepside that actually had a wood floor? 🙄
@MrMrhp350x3 жыл бұрын
The 60-66 chevy fleetsides were wood too 😂
@danielrickel88073 жыл бұрын
The fords we’re light years ahead of the Chevys in theses years. Why did Chevy wait until 1967 to put steel floors in their trucks?
@carnut1921Ай бұрын
WAAAAAY TO MUCH WORK FOR ME. 😂
@scottcooksey5284Күн бұрын
Stupid design,,,, use the same damn factory holes. Forget the 4and 5/8 and 8 9/16 and 29 and 111/1278,s.... And drill your new holes. Good grief, wth are you thinking. Then advertise it "ready to install...".
@DelBartel0956 Жыл бұрын
Would be nice if it was manufactured to use factory holes.