How to Replace and Install Front & Rear Glass in 1967-1972 Chevy Trucks - Kevin Tetz with LMC Truck

  Рет қаралды 251,078

LMCTruck

LMCTruck

Күн бұрын

Пікірлер: 134
@ericchapman8956
@ericchapman8956 3 жыл бұрын
So glad I watched this. My windshield is cloudy and leaks. Now I know exactly how I'm gonna go about paying someone to do this instead of me.
@lewisroberts7125
@lewisroberts7125 4 жыл бұрын
Kevin Tetz gives the best advice I’ve ever heard in my life during this video: if you get frustrated, take a break.
@deankay4434
@deankay4434 4 жыл бұрын
In 1972 our dealer handed internal repair orders for installing bumpers, upgraded radios and rear sliders in pickups. It was very common as every vehicle had rubber gaskets. I am sure there is a lot of advice like the dish soap & water. Had two woven ropes way long but on oak dowels and narrowed center for comfort and the ropes tag end ties off. Other than starting on the bottom using the windows weight to assist the install, I did sliders while open but sprayed WD40 which evaporates after a few hours, but works great. Installing hoses, hose removal using hose tool from SnapOn (Standard and extra long) and installing glass. A hand on the wooden pull, work the rope and spray the WD40 thru straw and never had an issue on hundreds. 3M make a “Auto Bedding and Glazing Compound” P/N 8509 today is $10-$15 for a caulking gun cartridge that is non-hardening, black, remains pliable for 32 years, seals a leak using a dealer service manual air pressure procedure and soapy water for location. A length of brake line brazed onto an air blower I made in the 70’s, but dries the area very well. Tiny cut in the plastic tip allows a tech while pulling out on the rubber with a wiper-arm tool gave you enough to push in place with a paint stick and wipes off with a little acetone. Even with the “Alkaloyd Enamel” use during this time did no harm. Nice effort, lots of extra work when doing this trim but worth it. The new trim won’t work with NOS rubber as it deeper. Regards, ASE Master Tech since 1978 - Retired.
@dnmack1
@dnmack1 6 жыл бұрын
Great editing! I didn't hear any cussing at all.
@jimmysapien9961
@jimmysapien9961 2 жыл бұрын
Haaa👍🏻
@cjleon1104
@cjleon1104 2 жыл бұрын
That's done at your house when the order is delayed for months..
@rooky55
@rooky55 11 ай бұрын
I owned my 72 Cheyenne since Oct 71 and am still driving it every year. Living in the country and working in the oil patch I went through many windshields. The newer ones were leakers until I found a NOS with thicker glass. I am running the factory gasket now in 2024.
@Lmctruck1
@Lmctruck1 10 ай бұрын
Thank you for sharing! Have you shared your story on LMCTruckLife.com?
@rooky55
@rooky55 10 ай бұрын
I don't know how but you are welcome to share it., thanks.@@Lmctruck1
@byronperry6014
@byronperry6014 Ай бұрын
Where did you find NOS glass?
@jackpinnell3204
@jackpinnell3204 6 жыл бұрын
quick tip: when you're working with the stainless trim and using a screw driver or needle nose pliers, wrap one layer of blue tape on the tips of the screw driver and the jaws of the pliers and it won't leave micro scratches in your molding.
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
Jack Pinnell Good tip Jack!! Saves an extra step!
@stevenholmes9773
@stevenholmes9773 7 жыл бұрын
Even Dante was smart enough to stay away from the windshield installation LOL
@Ericjsime
@Ericjsime 5 жыл бұрын
Wouldn’t you want to paint the car before replacing the window seals?
@bennieeubanks6055
@bennieeubanks6055 7 жыл бұрын
Good job that windshield looks amazing.
@blackburd
@blackburd 3 жыл бұрын
Some things I gladly pay for.
@patpathelps
@patpathelps 6 жыл бұрын
It's about time Kevin got his own show
@codypeterson7166
@codypeterson7166 6 жыл бұрын
he was on trucks! for a long time
@gerhelwinters1967
@gerhelwinters1967 Жыл бұрын
In my 68, I switched cabs because of rust about 20 years ago. The windshield Was good so we successfully put the windshield in the new cab, which was the original from the factory it is still in my truck today in good condition,, and the back glass too.
@rooky55
@rooky55 10 ай бұрын
Yup, the NOS windshields work.
@robertoleeva985
@robertoleeva985 7 жыл бұрын
I tried this with a Chinese gasket and it was a pain. I stopped and ordered the USA made gasket. We'll see how that goes. This video is a life saver. Thanks..
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
Roberto Leeva Hard lesson learned!
@rooky55
@rooky55 10 ай бұрын
You need the NOS thicker windshield if you want to avoid a leaker. I had lots of leakers over 25 years until I got the NOS windshield.
@ruvenramirez4358
@ruvenramirez4358 4 жыл бұрын
This video just convinced me to not do this on my own. Thanks!
@karlsmith2570
@karlsmith2570 4 жыл бұрын
The soapy water method that Dante used is definitely a good idea As Dante had said, "You need all the help you can get"
@workingmansrestorations7071
@workingmansrestorations7071 5 жыл бұрын
I do alot of stuff myself... But some things are best part to pros
@joncinc6485
@joncinc6485 5 жыл бұрын
I just bought the standard rear window rubber seal, which is the one without the trim. Is that going to be more likely to fault than one with the trim? It seems to me, after watching this, the trim also holds the window in place better.
@octaneartllc
@octaneartllc 6 жыл бұрын
No need for acetone use dawn and warm water. Cheaper on solvents, easier on you... mold release is usually soap or oil based... i use dawn ultra...
@dodgeramsport01
@dodgeramsport01 5 жыл бұрын
Octane Art Canada but dawn will cut your wax
@BigTex347
@BigTex347 3 жыл бұрын
Thanks for the video. I'm going to attempt to install both the driver side and passenger side windshields (split windshield) on my 1948 Flxible bus. I'll post again once I'm done.
@hernandezhernandez3764
@hernandezhernandez3764 Жыл бұрын
Need to start from the center bottom and close on the center top!! Push the winshield upward on both sides !!😎😎😎
@Tigerfire75
@Tigerfire75 5 жыл бұрын
I would have kept the slide window design. On my uncle's 87 GMC Sierra 2500 we put one in. With the pull vents on the kick panels you get a great air flow.
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
Tigerfire75 True that! O would have reused the slider!
@GoKartsorGoneFishin
@GoKartsorGoneFishin 2 жыл бұрын
Thank you
@rivernorcal679
@rivernorcal679 Ай бұрын
Thanks Dog!
@detlefklautzsch8609
@detlefklautzsch8609 Жыл бұрын
Hey Ivo so ist es genau richtig, sehe ich genauso. Ich hoffe bei euch ist alles gut. Liebe Grüße Detlef und Dagmar Sandra
@mattmckee7469
@mattmckee7469 7 жыл бұрын
Thanks for the info! Is it possible to install the Stainless after the gasket and window have already been installed?
@jameschapman132
@jameschapman132 6 жыл бұрын
Matt McKee I have never been able to in my 15 years installing the body of the truck acts like a locking of the gasket to the molding. It would be extremely hard to open up grove enough with out bending molding lip before getting it into place
@jamessingrey4964
@jamessingrey4964 4 жыл бұрын
Seems to me, it be easier to start the rope pull for the lip seal at the bottom on the front window as you did the rear window gasket. Why did you start this front from the top
@wreckum56
@wreckum56 4 күн бұрын
If you have ever done one the upper corners are a bugger to get in that’s usually where they get broke so you do them first to relieve the pressure on them.
@timothyroatenberry1274
@timothyroatenberry1274 2 жыл бұрын
I bought the stuff to rebuild my vent windows from u guys on my 1968 c10 felt also ! About a month later, the little washer ? Where the vent glass pivots open or shut broke ! Any suggestions with out replacing the frames ! If I have to replace one I'm going to do both ! Those bugers cost $350.00 per side ! Thanks guys !
@douglasclark5439
@douglasclark5439 2 жыл бұрын
What brand of gaskets do you use for the 85 c10 standard gasket no trim
@johnny991965
@johnny991965 4 жыл бұрын
Terrific very informative video. Thanks.
@AMSRocker
@AMSRocker 7 жыл бұрын
Why would you NOT use a spray silicone? Would that hurt the new rubber seal?
@ParagliderCollapse
@ParagliderCollapse 6 жыл бұрын
I have watched other videos that specifically recommend spray silicone.
@dodgeramsport01
@dodgeramsport01 5 жыл бұрын
Christian Blankenship Its not good for the rubber
@philipgreen1223
@philipgreen1223 4 жыл бұрын
Causes fish eye problems if you are going to paint. Otherwise use silicone spray.
@countyguy2003
@countyguy2003 7 жыл бұрын
kevin makes it look easy
@FernandoPerez-bw5xo
@FernandoPerez-bw5xo 4 жыл бұрын
Looks Great!!! Do you know if the trim will fit a windshield of a 69" G10 Van?
@robertoleeva985
@robertoleeva985 4 жыл бұрын
Fun times.. It took me 3 days to get the bugger in.. Mom had to come in and save the day. !! My rubber was too big!!
@jimmysapien9961
@jimmysapien9961 2 жыл бұрын
😳
@byronperry6014
@byronperry6014 Ай бұрын
Wouldn't that be your father's fault?
@johnwahalla5049
@johnwahalla5049 5 жыл бұрын
Great video Kevin, thank you.
@jeffrey4547
@jeffrey4547 5 жыл бұрын
on my truck the rear slide window is in the option sheet of the truck it was factory and they had front disc as a option too but no buddy ever got it same with the 79 z28 rs t top with full spoiler kit nobody ever got that option too and i have one with the option and the pro glass guy that did my truck he put the rubber in then the glass and he did it way faster by the time u had the rubber on the glass he had it installed this gut was fast and i have worked on a lot of cars never seen some one do a window so fast and have it perfect
@aaronbryant8315
@aaronbryant8315 3 жыл бұрын
Lmc Chevy lovers lol lots of Chevy vehicle videos there are other vehicle manufactures
@thetasteofluck
@thetasteofluck 4 жыл бұрын
two thumbs up.....
@juanjose1983jm
@juanjose1983jm 7 жыл бұрын
I see a crack on the glass.Never mind it's my phone.
@BuySellTrade-g7i
@BuySellTrade-g7i 3 жыл бұрын
Do they have that chrome trim piece in black
@Lmctruck1
@Lmctruck1 3 жыл бұрын
Hello, we do not offer that piece in black.
@Rlowe928
@Rlowe928 6 жыл бұрын
That hood cowl is so ugly it makes me want to punch puppies. Nice install!😀
@byronperry6014
@byronperry6014 Ай бұрын
Do you feel better now that you have said something negative?
@mikediamond257
@mikediamond257 6 жыл бұрын
Is that how it’s done in the states? A lot different in Australia. Like everything though. You have the ones that can and the ones that shouldn’t.
@whatyoumakeofit6635
@whatyoumakeofit6635 5 жыл бұрын
Dang.....how in the world did the assembly plants manage to keep the assembly lines moving with this trim install being such a hassle ?
@blahblah2blahblah260
@blahblah2blahblah260 4 жыл бұрын
They were probably already in another location and was just ready and waiting when the trucks came down the line.
@jimmysapien9961
@jimmysapien9961 2 жыл бұрын
Practice . Practice
@MrMander87
@MrMander87 3 жыл бұрын
My favourite part at 24:00 - that cackle!
@grimkupid8478
@grimkupid8478 4 жыл бұрын
When he said my buddy....I was hoping he was going to say Ryan......lol
@robbygee2539
@robbygee2539 6 жыл бұрын
A paint can opener is the best windshield wiper removal tool there is.
@huntercraft1668
@huntercraft1668 6 жыл бұрын
When will you show how to do the same for a 73 thru 87 model?
@kennethsmith1744
@kennethsmith1744 3 жыл бұрын
I had 72 and a 67 wish I still had em gave em away
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
Makes ya really wonder how they did it so fast at the factory?!
@jimmysapien9961
@jimmysapien9961 2 жыл бұрын
Lots of practice 😵‍💫
@maistrote7539
@maistrote7539 7 жыл бұрын
I need the same video but in a 87
@kaiblue5660
@kaiblue5660 4 жыл бұрын
SAMEEEEEE
@bryannelson3462
@bryannelson3462 6 жыл бұрын
I have a 71 K5 I can get just about any part for my Blazer accept for the part I need most. The inner panel that runs above the windshield which also hold the rearview mirror, any plans in the near future on producing this panel? I see you make one for a pickup, that'll be a lot of modifying and at almost 200 dollars you got one shot to get it right lol This is my second comment on the same ?
@Lmctruck1
@Lmctruck1 6 жыл бұрын
Hi Bryan! We're always actively looking to expand our parts selection and applications for our customers, but at this time we don't have information if we might carry this part for the Blazers.
@bryannelson3462
@bryannelson3462 6 жыл бұрын
@@Lmctruck1 Thank you for getting back to me looks like I'll be fabricating something.
@montyburns94
@montyburns94 6 жыл бұрын
TETZ BRO!!
@CKE142B
@CKE142B 7 жыл бұрын
The cab should have been painted before the glass install, don't you think?
@Tewrobert49
@Tewrobert49 6 жыл бұрын
It might be A rat rod.......Paint is A SIN in that case :)
@davesilvia9711
@davesilvia9711 4 жыл бұрын
some people just tape and spray, but i agree with Tewrobert49 about keeping the patina look with the ratrod culture.
@kevinharvey3308
@kevinharvey3308 3 жыл бұрын
rust rod maybe,just clear and go
@NEWAutoGlass
@NEWAutoGlass 7 жыл бұрын
start windshield from bottom not top . its easier
@glassgod370
@glassgod370 6 жыл бұрын
On this one it's easier if you start from the side
@donrutter6765
@donrutter6765 6 жыл бұрын
Run dirt track, you dont need windows. 😁
@dodgeramsport01
@dodgeramsport01 5 жыл бұрын
New auto Glass that makes not sense! Its still the same !
@gadgetmanhookup
@gadgetmanhookup 5 жыл бұрын
How is that possible with the rain gutters on these 67-72 trucks?
@bennetfox
@bennetfox 6 жыл бұрын
I still think I'd call my windshield guy and have him install it.
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
Bennet Fox Amen brother!! Lol!!
@VinhTran-ee1vm
@VinhTran-ee1vm 3 жыл бұрын
I called two windshield guys and they said NO WAY once they found out that my windshield has metal trims.
@dyer2cycle
@dyer2cycle 6 жыл бұрын
...haven't done the windshield, but I have replaced the rear window on my '70 with nothing but a flat screwdriver, worked fine. Re-used my old rubber(my old glass got broken out). Found a used glass, cut the rubber with a utility knife and out it came. WAY better to fix than this modern glue-in crap. Try getting out a used glue-in windshield or rear glass without breaking it....Never should have gotten away from the rubber seals...
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
dyer2cycle There was a reason they did away with that. Sell more glass that way!!
@thefakederekrufle
@thefakederekrufle 5 жыл бұрын
I need to install a windshield in a g body.
@byronperry6014
@byronperry6014 Ай бұрын
Wouldn't have been better to piece the stainless trim together before installing it in the groove?
@johndeere9974
@johndeere9974 7 жыл бұрын
Another video on how NOT to install these gaskets ,Always start at the bottom . And use the 67-70 trim and gasket ,much easier .
@lanceroark6386
@lanceroark6386 7 жыл бұрын
john deere can you add a link for the video of you doing a better job?
@turboflush
@turboflush 5 жыл бұрын
Makes sense in theory. Don't have to fight the window falling down.
@turboflush
@turboflush 5 жыл бұрын
Would you say the same for a 1962 c10? They are a beast. Lots of lube and patience. Dish soap is better choice I think. Used the window cleaner.. mehh evap to quick.
@gadgetmanhookup
@gadgetmanhookup 5 жыл бұрын
You cannot start at the bottom 67-72 have rain channels at the top. The top must go in 1st. I tried to tell a mobile glass installer that but the idiot wanted to do it his way and cracked the glass. Bastard left his rope and never came back.
@asmythurst
@asmythurst Жыл бұрын
As a glass installer, my team can do this in 10-20 minutes installed
@cantyoufeelthelove
@cantyoufeelthelove 6 жыл бұрын
lets see this video for 80-87 LMC
@PrecisionReplacementParts
@PrecisionReplacementParts 6 жыл бұрын
kzbin.info/www/bejne/raXQloeJq9yUitk&lc=z23oj3ax0yumyhmkgacdp432dluyrold0ohqnfl5e1tw03c010c.1530239116170550&feature=em-comments
@PrecisionReplacementParts
@PrecisionReplacementParts 6 жыл бұрын
73-87 are all the same.
@wreckum56
@wreckum56 Жыл бұрын
Yup and if you have troubles…. take a break ,a beer break and then when you have enough in you you don’t care if you break the upper corner of the windshield then proceed .Lol These are a pita.
@MichaelGreen-ox4lp
@MichaelGreen-ox4lp 6 жыл бұрын
Need more of 73-87 c10
@dodgeramsport01
@dodgeramsport01 5 жыл бұрын
more ford
@danderson9881
@danderson9881 5 жыл бұрын
Rustrolet
@smithshaven8584
@smithshaven8584 5 жыл бұрын
I’m starting to think LMC stands for “Lots More Chevy”.
@TheTallOne890
@TheTallOne890 5 жыл бұрын
i love this comment
@TheTallOne890
@TheTallOne890 5 жыл бұрын
great comment love it #Chevydance (dont kknow why im dissing chevy)
@markaraujo06
@markaraujo06 2 жыл бұрын
kevin from eastwood.
@chicharron138
@chicharron138 4 жыл бұрын
Seems pretty redundant to add new glass to a truck that has been restored yet, or maybe it's just for educational purposes, either way great job guys!
@sarabrown2082
@sarabrown2082 5 жыл бұрын
Needs a new hood
@Gnif57
@Gnif57 6 жыл бұрын
just don't try using 67-70 rubbers on a 71-72, we got two sets of rubbers that wont work or hold the 71-72 chrome …… todays we try with the right rubber
@bryannelson3462
@bryannelson3462 6 жыл бұрын
I ordered the rubber for my Blazer I hope it works but I need to do fabricating first.
@bryannelson3462
@bryannelson3462 6 жыл бұрын
I also don't have the chrome trim either.
@VegasRT500
@VegasRT500 4 жыл бұрын
Safelite will not replace your glass if they see even that small amount of rust.
@ze_german2921
@ze_german2921 5 жыл бұрын
This seem like some very tedious work. I could not imagine what factory worked had to do to assemble these back in the day.
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
ZGERMAN Exactly the glass installers are the factory had nightmares I'm sure!!
@adriantomlin2902
@adriantomlin2902 5 жыл бұрын
At the factory I mean.
@jimmysapien9961
@jimmysapien9961 2 жыл бұрын
Let’s hear from the factory workers
@s10-Mike
@s10-Mike 5 жыл бұрын
I bet all the dislikes on this video are auto glass guys like me.. so many wrong tips . Notice dante started the rope at the bottom. We call these 5 minute jobs.
@smithshaven8584
@smithshaven8584 5 жыл бұрын
Hmm... here we are again - on the LMC “GM/Chevy channel”. It’s like going to a huge auto swap meet. You look and look for Ford stuff, but it just isn’t there. Or picking up a Classic Trucks magazine. Chevy and more Chevy. I guess I’m just going to have to sell my ‘68 F-250. Cracks me up. Did someone pass a law or something?!?
@kevinharvey3308
@kevinharvey3308 3 жыл бұрын
dropped Classic trucks, and Trucking Magazine years ago because of that . They should rename them Chevy Truck magazine
@jimmysapien9961
@jimmysapien9961 Жыл бұрын
In most cases don’t put trim back on !!!!!
@riccardo7650
@riccardo7650 Жыл бұрын
OMG... that's such a horrible job 😱and the risk that something doesn't fit or is leaking in the end is extremely high😑 The version with the metal trim looks really cool, but seems nearly impossible to assemble...cause experience has shown that these parts to all miserable fits very badly... ... But when everything is finished, it always looks good, of course.😜
@russell9742
@russell9742 Жыл бұрын
This was hard to watch.
@ededmund5685
@ededmund5685 6 жыл бұрын
HEY I DON'T BELIEVE YOU FINISHED THIS BY YOUR SELF ...? YOU SHOULDN'T TELL ANYBODY THEY CAN DO THIS JOB ,IT'S A JOB FOR AN OLD EXPERIENCED GLASS INSTALLER ,, 9 OUT OF 10 WILL BREAK THE WINDSHIELD ,,YOU CAN BEAT THE BACK GLASS & IT WON'T BREAK .. ED
@Aaron-hd8ql
@Aaron-hd8ql Жыл бұрын
LMC CUSTOMER SERVICE IS A JOKE BOUGHT A TOP RADIATOR HOSE FOR MY SMALL BLOCK 350 AND THEY SENT THE WRONG SIZE HOSE THE FIRST TIME CALLED COMPLAINED THEN AGAIN THEY SENT OUT A NEW ONE SAME SIZE AS THE FIRST SIZE THEY SENT SO THEY SENT ME TWO RADIATOR HOSES THAT ARE THE WRONG SIZE TALK ABOUT EPIC FAIL FOR A COMPANY I WILL TAKE MY CLASSIC PARTS NEEDS ELSEWHERE PEOPLE IN KANSAS NEED HELMETS.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Windshield Installation for a 1972 Chevy C10
17:41
Dadbro's Garage
Рет қаралды 3,3 М.
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 288 М.
HOW TO: Chevy C10 Windshield Install
5:55
UNITED BY TRUCKS
Рет қаралды 28 М.
1967-72 Chevy C-10 Flush Fit Back Glass
11:00
OnePieceProducts
Рет қаралды 74 М.