ACCIDENTALLY MADE THE LOUDEST TRUCK | CAMMED 2 STEP FLAMES |

In todays video we say goodbye to the Y pipe on chomper and install a new X pipe!!!

[@Itsjoshbo]

Carven r for sure. Best tone out. I would either do dual 3-4” tips out the passenger side together or dual rolled 5s out of each corner

[@EastonGolden]

Yes this is the one duals with 5” rolled tips!

[@howdythere2419]

Carven R’s would make it sound absolutely perfect. I have them on my tundra and it got rid of all the rasp. Mine is fairly close to loudness as straight pipes but without all the rasp and cackle.

[@Pedritoe]

Yea i comented on his older video I love the r series i ran them on my old single cab

[@constanttension8833]

rasp and crackle is what sounds good?

[@thecrow1727]

Drone terribly but will definitely make a clap wagon needs corsa extremes imo

[@nicklair3046]

Should look into valvetronic mufflers, basically straight pipes when you want it, and quiet when you need it! And they’re decently priced

[@2toned.z68]

Definitely true dual X with carven R.. currently running the TR’s and mine is plenty loud. The R has like nothing to it lol

[@Hollandden]

Holy crap what a beautiful sound😍😍😍🤤🤤

[@jamespritchett1886]

That’s the sound don’t change that. Really makes the engine talk.

[@imlegend8573]

sound like horses on concrete 🐎 luv it

[@kev_lsn7042]

I’d say no mufflers, BECAUSE once you carry those pipes out to the end it’ll quieten down more than you think. If your heart is set on mufflers though, I would put a super 10 on each pipe. I’ve also heard of people doing double X pipes, which is something to consider. As for tips, I usually love the 5x12 slant cuts, but on my 05 like yours I went with the 4x12 slant cuts. They’re fricken sweet, bc you still get the nice deep tone and it still sounds great like the 5x12s. You can hide them better (if you want to) and they’re typically cheaper than the 5s. It of course sounds a little different but I think they actually sound better.

[@daylanwarren8427]

Exactly what I would do

[@railerman2314]

True dual X pipe with 2 black widow neighbor haters= angelic orchestra noises and you should do a dual passenger exit behind the tire like mount the tips like the 6.7 powerstroke factory tip

[@codybrown4745]

I have a white 06 Sierra and you’ve inspired me to be a better truck owner. Yours is amazing. Love the videos.

[@markbarilleauii6337]

The Carven R's are super loud. I had them and axle dumped them, with 4" rolled slant cut tips. For Chomper I would say 2 Borla xr-1's and ran to each corner and angle them down. 👏

[@Itsxthebk14]

Why tf would you get tips on a axle dumped exhaust

[@markbarilleauii6337]

@@Itsxthebk14 Because the truck is lifted and I didn't like the way it looked the ugly SS pipe just chillin.

[@markbarilleauii6337]

@@Itsxthebk14 Why tf do a lot of people do the $hit they do?

[@Itsxthebk14]

@@markbarilleauii6337 it's not that serious you got a clapped out truck

[@markbarilleauii6337]

@@Itsxthebk14 I know it's not that serious, just throwing it out there. If you don't like it you can just throw it back...

[@brucesheehe6305]

That is one beautiful unit!

[@lovisla]

I was scared you liked it loud at no cost - the mufflers will return it to that chomper sound we fell in love with

[@thatchicagoguy7370]

I'm sure it's probably too late but if it was my truck and I was going to run a muffler, I'd go Spintech. Either the 6000 or 9000 series. Spintech sounds the best in my opinion out of any muffler

[@rmoutdoors5562]

Spintech 6000 series on my Cammed 5.3 Sounds fucking crazy. Equal length exhaust and it sounds like a corvette. Highly recommend.

[@BamaPrince1]

Would sound awesome super choppy I got Flowmaster cut outs I'm in Bama too they never bother me they always love the Chop. Hooker headers shorties and Long tube are great. I have a Choppin 2003 Ford Ranger with a little small block in it when I roll up on people there face is priceless

[@xgamingboom1921]

I’ve got the black window neighbor heater on my 2000 GMC Sierra and I love it definitely recommend looking in too if you like a deep aggressive sound

[@dakotachilders6144]

That sounds sick, brother

[@woos94]

I have a Carven R on my 2019 Silverado and it sounds great, I really think you will love them.

[@andrewsnead4612]

Super 10's, Hitch dump, 6" slash cut tips

[@logicbewithyou111]

id say carven r's or dynomax race bullets if you want a muffler. Overall the dumps make it so much louder in the cabin so simply running the pipe to the back will quiet it down a lot for you in the inside.

[@user-ux4wk9ov1g]

To me it sounds great just the way it is

[@calebmarshall9890]

Spintech 6000 muffler rolled tips turned behind the tires 😍

[@mattpalmer9754]

my buddy had carven out the back it was insanely loud just like that setup u got now. he turned the carvens down and they sounded so much better

[@mattpalmer9754]

u couldnt even sit in it from the clap

[@TheycallmeRpCratchet]

Nothing sounds better than an equal length setup with an x pipe and spintechs. I’d love to see you do this setup.

[@christopherowen9256]

My personal favorite are the 6000s what do you prefer?

[@Admiral_Potato41]

​@@christopherowen9256 I'm gonna be getting a xpipe 9000 setup on my Suburban. It probably won't be equal length but it'll be close. Will come back with findings lol

[@soccerboy1296]

I have this exact setup you're asking about. Cammed 04 avalanche with 1-3/4 long tubes to 3" x pipe equal length to spintech 9000 with turndown at axle. It's loud for sure lol

[@emmanuelvelazquez9640]

@@Admiral_Potato41did you do it?

[@Admiral_Potato41]

@@emmanuelvelazquez9640 it's actually set to go to the exhaust shop in 1 or 2 weeks. Im doing a 6" lift this weekend, alignment shop on Monday and then down too the exhaust shop. Just got my header reducers and 9000s in the mail last week.

[@cameronbarnard5820]

You should do a Flowmaster 40 series or super 10, I would love to hear what is sounds like with a Flowmaster!

[@CowboyTrent01]

Sounds good on a cammed Silverado my cateye had flowmaster 40

[@countryboyoutdoors1751]

You do what you want but my buddy from school had a truck with a choppy cam in it, and I mean so choppy it bout stalled every time u put in gear and it has duals with an xpipe and it sound so awesome

[@JBmuddin]

U should put the c7 corvette quad tips out the middle of the roll pan it would look sick

[@TheyCallMeNoobieButItsNewBa]

facts

[@Dadmotivation]

Spintech make really good mufflers and have a really good sound and for that truck with a cam would be icing on the cake

[@wyattlanglois7091]

The ole girls sounding mean! You should try a set of black widow widow makers I think they’d sound amazing on chomper

[@KJOSS208]

Carven is the way to go, It won’t disappoint!

[@tannergoodson9800]

I agree

[@calebmarshall9890]

those corvette “mod” exhaust on trucks are sick too.

[@TheWolfMatt]

"It sounds like I have a big block under the hood" said the lil cammed 5.3L 😁 under the hood. You should try some of the Corsa Pro Series mufflers. I've always wanted to know what those would sound like on these trucks.

[@josephmcardle9394]

Vibrant performance bottle style resonators.

[@Dirty_Diesel_Gabe]

Top 5 would be widow maker, carven r, neighbor hater, Flowmaster, or magnaflow

[@braydengrizzle8]

Flow master flow fx is what I have absolutely love it

[@lorimarkie183]

I love it, I need to change out mine to make it louder

[@Beetlebot076]

Chrome rolled quad tips

[@redwolfmaddox3986]

Sounds perfect

[@frightenedskillet1051]

You should do a video where you either heatwrap the headers or coat the whole exhaust to squeeze out those last few BUFF horses

[@chevy208.3]

The ricer mufflers sounded nice I like the deep drone sound 👍🏾

[@LS3BraxtonSenn]

I would do the black window venom 250 or a super 10. Would sound so mean with the long tubes & tsp cam

[@julianpavlock6943]

I would the try the 3 inch magnaflow bullet lot of people had it with long tubes

[@kylevinson7920]

I second this opinion

[@bobbyhurdt8935]

X-pipe at the exhaust shop for sure

[@AQWbladefire]

Color match the rollpan, get a cowl hood and color match or put HD good. Cant go wrong with both, then start redoing the entire interior

[@Onthewayupp]

Yeah, I had a Tahoe that two stepped and shot flames….. shot flames so bad it blew my cats clean out 😂

[@Spfrickproductions]

Dual carven r mufflers with full 3in duals with some nice tucked 6x18 rolled tips

[@DesperadoGarageOfficial]

Flowmaster super 40 as a muffler. I have that on mine with cats deleted single 3 inch exit. I'm doing a cam swap at the end of September in my suburban and I have the 5.3 ls1 and I got long tubes going in.

[@jlautomotive6349]

Chomper needs LARRYs set up?!!! How about Thrush Welded mufflers? They sound incredible and will not break the bank!! Keep up the incredible work and I can’t wait to see what you get!!👍

[@kennethmoyer1980]

I think it sounds great just as you have it now!! You can really hear that cam chopping now!!!

[@codysparks092]

For mufflers I would run 2 magnaflow bullets part # 14419 would sound amazing!! And for tips you could change it up and do the corvette style out the back canter with 2 dual tips 4in

[@codysparks092]

Or 2 of the corsa pro mufflers would sound great to!

[@jessevincent8460]

Black widow Widowmaker 10s all day by far the best sounding muffler out there

[@logangordon4961]

You need to do true dual with 2 1/4 inch pipe with dyno max race bullets and 6 inch tips that’s the next setup I’m doing on my 5.3

[@cymbalenthusiast3265]

Go with Corsa Pro-series aka "Extreme" mufflers. They sound amazing with headers and an x-pipe. I'm doing headers on 13 Ram 1500 soon then going with Corsa mufflers and an x-pipe.

[@davidsims7619]

Honestly Chase, I'd say either a flowmaster super 10, a 14 inch magnaflow magnapack or a flowmaster outlaw. I've had these on my Chevy 1500 and I get Soo many good comments on my truck.

[@SuperChevyboy85]

Im a true dual muffler guy. 2 blackwidow venom 250's with them 5 inch boys would be narley.......

[@huntjilesfamily6343]

True dual carven 4 1/2 or 5 in rolled tips out the side ROLLED TIPS WITH THE ROLL PAN perfectly rounded body

[@unariusmiller1783]

What I’m doing to my 5.3 is longtubes to two black widow widow makers and six inch tips bumper dumped

[@socal_c10]

3in magnaflow bullets!

[@fredperry8859]

11:53 Dual 4” Quad Tips straight off the back. They come in different colors (black, chrome, etc..) exiting where the hitch brackets would be. 👍

[@marknewman9430]

I run dual magnaflow glasspacks. Straight through but tones it down.

[@jarredjohnson5394]

I have this exact setup on my cammed 00 sierra 3 inch duals x pipe woth shorty headers. Very loud lol. Bit I've been looking at the super 10 by Flowmaster. Really any single chamber muffler will be good

[@donaldspeck9212]

You are the MAN! AWESOME SOME 10 out of 10

[@Rae_Rae148]

My vote is for magnaflow 14419 I had them on a square body with a cammed 6.0 xpipe all way out the back and it sound amazing but was a bit on the loud side

[@michaeltn8]

In highschool I would have thought it was sick but now I’ve got true duals with mufflers and it claps but it’s not too loud

[@austinrivenbark8436]

Dynomax race bullets and corvette tips straight out the back in the middle

[@Jbyrd.Outdoors]

Get carven R’s, I have them in my 2012 Sierra and they tone it down at low rpm’s, but still has a mean idle and screams when you open her up.

[@vinnymarks8435]

love the truck the way it is but some 26 og ltz will look great on it

[@dippinlifedavid7316]

In my opinion that's how I would keep my truck sounding

[@1sik6.0]

😍 oh yea she sounds beautiful making me want to reinstall my 2step 😂, question brotha where did you get your cluster I need that baaad

[@kaymonbailey4282]

5 inch rolled tips coming at a Y pipe orrrrrr fish it at the license plate like Betty but closer Yk

[@gregg.6853]

Black Widow widow maker

[@SamuelBerryhill]

I’ll second that

[@gregg.6853]

They sound amazing

[@Casey_Lovett]

Yes I have two on my truck

[@FortnitekingOG21]

For real

[@JTRAMMZ]

Borla pro xr1 muffler

[@martin1176]

True dual straights with flowmaster super 40👍

[@chandlergordon7023]

I have my exhaust on my truck set up the same and I love it

[@rex0194]

Quad Corvette tips with the smallest borla muffler you can find

[@05cateye96]

Put the catless true duals back on with some 6 inch tips for the clappy clappy

[@Kaleb480.]

You should look into equal length exhaust on these trucks. It sounds great kind of like a corvette.

[@Kaleb480.]

With center exit corvette tips under the rollpan.

[@89yotasr5]

What would be sick is if you found the exact exhaust your looking for and get some electric cut outs for when you wanna get rowdy!!!

[@a10warthog75]

Sounds badass 😎

[@ak14619]

You should try a pair of spintech 6000s they make some trucks sound like vettes!

[@dylanholloway5134]

You should try an equal length set up next time. It will sound like a vette😂

[@nathankirkpatrick7876]

Get corvette tips, double dual tips right under the tag!

[@mauriciobsr.2430]

I think the 2 step is making your cats gutted out. Happened to me. On my Silverado I had the 2 step and kept hitting the limiter. In your video I think I saw some catalytic converter insides dumping out from the exhaust. It's gonna get to the point where your cats will become hollow and basically catless. On the bright side if you get pulled over u technically still have cats on it so it won't be a problem they will just be hollow. Don't tell the officer that obviously. LOL

[@kennethmoyer1980]

I believe he is running catless. He has long tubes headers with no cats

[@mauriciobsr.2430]

OMG I totally forgot he had longtubes. Of course he is catless. I feel slow now. U are right.@@kennethmoyer1980

[@johnjack8195]

Color match the LBZ driveshaft 🔥

[@goldentrac9853]

True dual with the x pipe and either borla or black widow mufflers

[@loganriedel1094]

Dynomax Race Bullets out to quad tips under the bumper.

[@trevorsimmons6214]

I have x pipe and spin tech 6000 on my cammed 5.3 and it sounds really good i recommend

[@damonfarmer3747]

At idol it sounds like a late model. Dirt racing not sure if you are familiar but being from Alabama I would hope so lol.

[@jeremylong7411]

Iv got Magniflo and they sound amazing.

[@prestonmcdowell1351]

I think you should try karnage they make them in South Carolina and you can order them and they sound good but idk what they sound like with a cammed vehicle they pretty cheap for the sound they like 120 or 150 for 1

[@WAHDEEDOWthe2]

Black widow mufflers man. Also a borla XR 1.

[@harleystillwell7519]

Go carven TR. I have the same cam I think you’ll be happy with them

[@floridaoutdoors4883]

Flow fx mufflers to serve as resonators, make it sound like a vette👍🏻

[@mwor9283]

You should put dragons breathe in the exhaust if you ever run them out the rear again

[@dezmonic]

Try a spintech 6000, what i got on my truck sounds insane with them on.

[@nicholasgee4583]

Thank you I been saying that for the longest

[@nicholasgee4583]

Sound just like a vett

[@redtundra_5.7]

Add some carvens or add a second x-pipe

[@itstankbitches]

I just did the same and went with Borla xr1's equal lenght dumped at rear behind bumper and wow..... sounds awesome. Its crazy how much volume and tone change the x does 🤙🏻

[@reidcordes]

Tips coming out where the trailer hitch would be angled down and out a little

[@tylerscott4665]

Sounds like……DEGA BABY! 🫸🏻🫳🏼🫸🏼🫳🏼

[@Thatcrystalrado]

What x-pipe did you go with? Also Carven Rs are the way to go😂