After 2 years. Doing another lift on my wife’s truck. This is still the best how to video!
@armentourosian90772 жыл бұрын
Man!! I just love your Videos. Just bought a White 2021 Trail Boss with 5.3l and you wont believe how helpful your Videos are. Thank You!!!
@cainclark1393 жыл бұрын
Just got my trailboss with the 6.2 and it doesn't disappoint! The motor is strong 💪 Great video, very informative
@campbell01623 жыл бұрын
Congrats. Hopefully yours doesn't develope a lifter tick like lmf's truck did
@teddyhenry56963 жыл бұрын
Love watching your videos between you and Lone Star Hawaiian ya’ll gives me so many ideas for my 2019 Trailboss!!!
@nathanbuck813 жыл бұрын
Well said
@IG_Gh0st32 жыл бұрын
YEAH THESE TWO GUYS REALLY GIVE YOU AMBITION AND MOTIVATION. SUPER TRILL!!!
@dennisnguyen44593 жыл бұрын
I definitely recommend ReadyLift. I also did a 1.75" leveling kit on top of my already 2" longer front struts from factory 21 Trail Boss. Now it sits 100% leveled front and rear. It looks amazing, and it rides so smooth with the new upper control arms.
@evelyn201 Жыл бұрын
so you can get a leveling kit that will just raise the front for the trail boss? What brand please?
@BigLou19 Жыл бұрын
@@evelyn201 Ready Lift Leveling Kit 1.75” SKU 66-3921 (I just ordered mine yesterday.)
@dcving1two3 Жыл бұрын
Are any of you seeing the left rear of the truck sagging lower than the right rear. After getting my lift installed, I measured the right to be 1 inch higher. Super frustrating to see.
@TheCONtwo Жыл бұрын
I just got mine done, damn control arm is close to my tire. It’s not rubbing but I can’t even slip a finger between em.
@davidscott48493 жыл бұрын
I put this same lift on my Trailboss back in March. Front and rear install and alignment took me about three hours. Price of cake. Very nice quality parts too…
@davidscott48493 жыл бұрын
Don’t forget to grease the upper ball joints….
@skylerlangdon92143 жыл бұрын
Holy crap that looks so much better. I have not been a huge fan of the new body style until this! Now to convince the wife
@rossy2012 жыл бұрын
This is actually the best video I have seen so far great job
@jlautomotive63493 жыл бұрын
Another incredible (and in depth) video!! Love how 2.0 is coming along!! 👍
@robertgoepel58113 жыл бұрын
I’ve been waiting for this video looks sick!
@joshuachute69563 жыл бұрын
Super informative video. Done like a true professional. Looks great Chase. Good job!
@maddoxtarvin3233 жыл бұрын
Early Gang love the vids man!!
@Italianborn Жыл бұрын
I enjoy watching video like this since I’m handy myself, and this one is decently done..there’s something called specs for the torque of everything and reason is otherwise all the bushing will just wear out faster, one more hint would be to tight the upper control once you have tire on and it’s lowered to the ground so that also it’s bushing don’t go through much effort, what happen is you tight them then put tires on and every time you drive it moves and stretch the bushing that are rubbing in there..i just bought a 2022 3.0 duramax , traded my ram 1500 for it which i used to have a 2.5” level installed myself.. I’m contemplating keeping this one stock even tho it’s hard to accomplish LOL..congrats on the video !
@gettin_while_growin15122 жыл бұрын
I can't hate . That bowtie looks tough 💪🏻
@BC_Hunter6 ай бұрын
Can’t believe those stock upper control arms are even put on a truck like that.
@themanthelegend7048 Жыл бұрын
I honestly would recommend washing and touching up the paint in the mount are of the frame while you have the strut off. Rust happens. And I'd consider cutting that rubber skirt off the shaft of the strut and put a typical off road boot on. They're better for keeping it clean.
@sparky_oo19553 жыл бұрын
Great new look!! Just what it needed.
@brandonburt20122 жыл бұрын
Maybe stupid question but with this being suspension components are you not worried about any torque specs?
@LTZ_Z713 жыл бұрын
Great job on the video and install. Now you just need to reinstall the rear blocks and bring that back end up a touch.
@mach5jeep4 ай бұрын
I think they changed this kit so you no longer have to disassemble the strut. It uses a spacer on the bottom control arm mounting point as well as the spacer at the top.
@S0flosilver3 ай бұрын
No the one you’re thinking of is the 1.75 leveling kit. The 2.0 is as in the video
@lobo89023 жыл бұрын
I did 2 2021 f150s..ready lift has great instructions
@caseyhatcher47263 жыл бұрын
4500 miles on my 2021 5.3...had to take a trip to the DR yesterday due to CEL and engine misfires...super sick!
@adamdover37833 жыл бұрын
What’s the problem with it?
@raymonddurkin3 жыл бұрын
Man I really don't like a Carolina Squat, rear rake all day long. However I appreciate everyone having their own interest, so enjoy.
@brentunderwood76003 жыл бұрын
looks really good man just one thing id do is take running boards off!
@AlexLopez-ld1rx3 жыл бұрын
Fr that’d be clean
@lmfscrew3 жыл бұрын
They keep the rock chips away
@brentunderwood76003 жыл бұрын
@@lmfscrew true didnt think about that
@kelvinthomas91612 жыл бұрын
I actually like the running boards looks and catching the rock chippers is ithe decision maker
@natorious762 жыл бұрын
I'm ordering that kit now, Great instructions!
@hitmann84200213 жыл бұрын
Funny part is that I've used a spring compressor many times and for some reason It's so scary to watch lol 😆
@LA_Drag13883 жыл бұрын
Me sitting here waiting for the next video title to say I put 2inch drop shakels on my trail boss lol love the vids
@alquitorianojr50552 жыл бұрын
So when you did the front leveling kit and you reinstalled the factory lift block for the rear I’m assuming? No rubbing from the 22x12 with 33 tire?
@dustbucket40593 жыл бұрын
Bro!! Looks bad ass!!! 💯🤙
@Crenshawprod.co.3 жыл бұрын
First!! Love it!!
@johnross74472 жыл бұрын
Perfect, that was the video I was looking gor to do this and how difficult it will be.
@jasonkwasky533 жыл бұрын
What made you go with readylift over others? Cognito. Zone. Lots of better options
@chasedelbridge41673 жыл бұрын
KZbin dont pay much bud
@jasonkwasky533 жыл бұрын
@@chasedelbridge4167 KZbin pays plenty and if you want cheap with better quality. The zone kit is literally $130 more.
@owenhaynes59683 жыл бұрын
they’re literally just metal rings and control arms how much better can they be
@themanthelegend7048 Жыл бұрын
Just fyi that strut will spin once the upper mount is attached to the truck.
@thebrian7channel4743 жыл бұрын
Looks good all u need is the tow mirrors and she look really good
@wiceworker3807 Жыл бұрын
Esta chincon tus videos amigos %%%🎉puro experto
@SSMWRX113 жыл бұрын
Nice! I got same SST kit but I'm sure they don't make 4", unless it's different for chevy but for ford it's 3.5". Anyways. In next few days, check again for the height because once it settles it'll come down a little which it wont make much difference. Soon, you might even want to go for 6 or 7" lift.
@daltonbarcia92163 жыл бұрын
I'm surprised the lift kit didn't come with diff spacers for correct CV angle.
@VertexGolfAcademy3 жыл бұрын
Everyone gets a white Trail Boss but honestly the torch red color looks best on trail boss
@Review-This3 жыл бұрын
I love my torch red Trail Boss all blacked out. But want to add this lift now.
@mikeanthony9763 жыл бұрын
Agreed, I just got my red hot 6.2 boss. Its absolutely beautiful
@KnightsGarage3 жыл бұрын
looks great man! I May go with the incognito kit for mine, want to keep the auto 4wd function.
@MrPAULONEAL3 жыл бұрын
Cognito's leveling kit uses Fox shocks and coilovers.
@MrPAULONEAL3 жыл бұрын
Chevrolet has a leveling kit for the Silverado.
@KnightsGarage3 жыл бұрын
@@MrPAULONEAL Only if you choose that option they have another option that has the upper control arm and a spacer. Plan on going with Bilstein shocks and struts.
@carpentrycoach22043 жыл бұрын
Thanks for the video. It helped. The instructions that came with kit are pretty good also. Did this SST kit yesterday on my AT4 and after some driving my net gain is 1 3/4”. I didn’t bother raising the back as the top of wheel well in back is still higher by 3/4”. Still haven’t decided what wheel/tire size I’m going to go with. Like the 4Play 4P70 rims. Would like to squeeze 35” rubber if I can get the right offset and minor modifications with mud flap delete and inner fender well.
@joshuajon2 жыл бұрын
Great videos! Love the set up. Could you please post what running boards you have on this set up or if anyone knows? Like the clean sleek look.
@fredbunkley56042 жыл бұрын
I just ordered the Readylift SST for my 2019 Trail Boss. I have 295/70R18 Toyo Open Country MTs coming in. I read that they will fit with no rubbing on the factory wheels, which I like. I'm going to use thee 3" blocks that come with the kit. I need to have a tad bit of rake for towing my boat and for the 500 lbs of bags of sand that I keep in the bed during winter. Also, my wife bought me the RC high clearance front bumper that comes with LED lights and RC side steps.
@Livin_Easy2 жыл бұрын
We're you able to fit those Toyos on the stock 2" lift without rubbing? I have AT4 and thinking something similar
@dominicgiannetti65623 жыл бұрын
Can you make a video about the warranty if it voids it or not
@raymondracca67173 жыл бұрын
Does the rear need an additional inch?
@georgezimmerman18273 жыл бұрын
Really sets it off.
@Chanceyflexjr.3 жыл бұрын
Love the videos buddy keep it up
@johnlove8174 Жыл бұрын
Awesome video! Very clear. Thanks!
@robertogutierrez36002 жыл бұрын
Does it need an alignment after kit installation?
@kalebpowell29473 жыл бұрын
First like and comment, let’s gooooooo
@jorrick663 жыл бұрын
Put pressure on that UCA with a pry bar and that ball joint won’t spin 😉
@bigc43floboy653 жыл бұрын
Nice sweet truck
@DOODER4X3 жыл бұрын
Yessier we just need the blocks removed and we in there
@isenhouroutdoors85302 жыл бұрын
Hey man. Question. Why didn’t you leave on the 35 recons you had? Did they give you rubbing issues prior to putting on your lift? I noticed you put those on but when you went to do the lift the 33s were back on. Thanks man!
@JR-wp7nc2 жыл бұрын
Great video ..my son is getting ready to lift his 1500 n it seems pretty easy truck looks hella nice 👌
@niiko_91613 жыл бұрын
Looking good man!
@tompowell12603 жыл бұрын
Looks Amazing !!!
@jclive11thebigboss3 жыл бұрын
That sensor wire doing more work holding the spindle than the ratchet strap
@misaelguerrero2372 жыл бұрын
I did a 4 inch ready lift wich is the same control arms ans spacer blocks I just want to comment that I came a cross an issue with the rear ubolts the where to long I didn't have a socket long enough to tightened all the way down so I had to cut them about "1,1/2" also I went with 35x12.5r20 on stock rins toyo open country mt I had to space it 2 inches 1,1/4 is enough but you have to cut the wheel studs
@jjrox89303 жыл бұрын
Damnnmm! That is sweet! How much for the kit and from where? Did your truck already have a factory lift? I might have missed that part.
@leir20052 жыл бұрын
The Trail Bosses are lifted two inches from the factory. Also you find the kit pretty much anywhere. EBay, Amazon, etc, etc
@14NJGUY3 жыл бұрын
standing proud! that is an awesome look! congratz!
@KingKong-gc2yk2 жыл бұрын
Specs on your wheels and tires buddy? Any trimming done? TIA Amazing video man👍🏻👍🏻👍🏻
@0isbrabra0in2 жыл бұрын
Does the ride get "pogo-y" like it can with leveling spacers? Or feel pretty close to stock
@SuperDave-pe1zw3 жыл бұрын
You need to put the blocks in the back, will make it level because only a inch bigger than original and get rid of that squat look.
@mikeperreira21563 жыл бұрын
Looking good! Can't wait to do a 6" on my LTZ.
@JMilMovies3 жыл бұрын
It looks like the rear is still dropped. If you left the drop shackle on the rear, you need to remove them. Permanent squats look so dumb. Trucks either need to be raked or level (unless they are under load). Squatting the rear is ugly.
@abumikail40462 жыл бұрын
What a hot truck!!!!!!
@armando0622122 жыл бұрын
Did you by chance end up wondering if your abs light was going to kick on or not? Lol I take everything sensors off now, no matter what. Cheaper than parts run to the dealer
@Halestorm053 жыл бұрын
Where do you live?? Love all the background in your vids.
@Leduan81 Жыл бұрын
I used the same stock bolt from the upper control arm. The supplied nut would make the ball joint turn. Did you ever isntall the supplied nut after
@campbell01623 жыл бұрын
Now we have Babysquat 2.0 😂
@rubyrednation71983 жыл бұрын
It’s looks so good I want one now 😅
@kingdommindset14623 жыл бұрын
Absolutely beautiful truck!
@chasegote3953 жыл бұрын
Impressive work
@nrcrookshank2 жыл бұрын
So, I’m confused, you dropped the rear 2” and raised the front another 2”? I understand you wanted to get rid of the rake look, but how did you? It’s not that clear.
@zebadair71733 жыл бұрын
Good day when you post
@samuelskelton96033 жыл бұрын
Looks awesome man!!!
@Jagman29193 жыл бұрын
looks great, did you install the rear blocks to achieve the level look? can you do a vid on that as a footnote? will you be getting an alignment just to see how off it is? great vid of the honeymoon. Marco Island is a great place.
@lmfscrew3 жыл бұрын
Will be doing those in future video👍🏻
@caseycech88073 жыл бұрын
Looks sick!! Is it still all the same for the sierra at4? Just wondering if there's any difference in the installation.
@lmfscrew3 жыл бұрын
Should be the same
@lukejacobs47033 жыл бұрын
Rock. Awesome truck
@Hpdsgt913 жыл бұрын
Does the 4 wheel drive auto still work?
@fibers43333 жыл бұрын
let’s gooooo
@NotALlamma3 жыл бұрын
Holy shit that looks good
@raiderville133 жыл бұрын
Did you add the rear blocks?
@mikemoore7239 Жыл бұрын
Beautiful truck, what exhaust are you runnin?
@M.Arbogast7 ай бұрын
I’m gonna assume leaving the axles in was not an issue?
@clappedout61403 жыл бұрын
Now get a 6 inch lift
@carlosj1432 жыл бұрын
Nice Truck Brother!! Hey what size wheels and tires you put on after your readylift was installed?
@nathanbuck813 жыл бұрын
What’s does your hats flag stand for? Great video, great truck.
@gmanhere.1732 жыл бұрын
Great stuff. Just subbed.
@zeno2193 жыл бұрын
we needa see some more of earl
@jeffhurley35483 жыл бұрын
That looks great that’s papa squat 😃
@vladsalfetnikov74313 жыл бұрын
Hey so I’m looking to upgrade my lift from blocks to an actual lift. Can I just change the shocks with the block and leave the rest or do you recommend a completely new lift kit
@mikewohlwend3631 Жыл бұрын
What size tires are you running with this? Also what’s the measurement from ground to the fender? Curious to know how much this lifts over stock.
@5.3_missmidnight562 жыл бұрын
I don’t wanna watch the whole video but does this lift require any cutting, permanent change from factory?
@ralphhernandez88633 жыл бұрын
I got that same leveling kit and I used my auto four wheel drive just fine… works like it was stock
@ralphhernandez88633 жыл бұрын
Btw looks awesome!!!
@jonsmith36233 жыл бұрын
I just bought the trail boss lift for my truck, and as soon as I get it in I'm putting the ready lift. Have you had any problems with your 4 wheel drive. I need to use my 4x4 where I live
@adamsmith19992 жыл бұрын
With the full 2” SST kit front and back will it fit in a standard garage and how does it ride compared to stock
@jakekadieu7923 жыл бұрын
dale yeah bo, lean that bit
@robertolerma88023 жыл бұрын
What wheel size is that at the beginning of the video
@natecarnes77312 жыл бұрын
How’s the kit holding up?thinking about getting it for my custom trail boss!