Loading Excavator Onto Lowbed Cozad Trailer

[@mrtn561]

Love the videos man. Learning a lot off you. Got hired for my first lowbed job at 25 years old.

[@18robsmith]

Great to hear Darrell's words of wisdom near the end ;-)

[@ariedekker7350]

It's always a pleasure to see Darl at work, so much confidence. Seen on 24-4-2022 at 13:45.

[@anthonyrobertson1787]

Thanks Trent, It's nice to see how much you learned from Darrell 😁👍 Stay Safe

[@cashtimevideo1501]

Another great instructional video for those learning the trade 😁. Superb, thanks guys! 😊

[@oddtechman]

Oh Sweet.... another Cozad video. Thanks for sharing! Didnt realise it was an older manual one instead of the air release/power neck. Learn something new every day! I think all we need now is a few recovery videos of one of your light duty's that we saw at 22mins 52 secs! They look interesting!

[@getzybreuer3691]

thank you so much for the video I really enjoyed watching you please post more videos a week God bless

[@bigdog8815]

You guys should look at buying a winch tractor or adding a 30t Tulsa to your tractor, makes hooking up so much easier on your truck, that’s how our trucks are set up pulling these types of trailers, don’t have to be rammy or struggle trying to hook up especially once you guys get a 16 wheel jeep to go with the combo

[@edwinschlee8374]

Another great video on loading on a heavy haul trailer! Need more videos!😄

[@jessdigs]

I always liked cozad lowboys. No starting auxiliary motors, no hydraulics, just simple mechanics

[@PakistaniTrucker]

I Like your videos, very interesting work 👍👍 ❤ ❤

[@arrowkart4j]

The cheetah Bead blaster. Such a great tool.

[@slimwantedman6694]

Good afternoon from Southeast South Dakota

[@A.M.E.R.I.C.A2008]

Getting a job to do this for the first time. Any advice for beginners?or suggestions????? Thanks for help

[@sampetersen1994]

Stupid question but can’t you slide your fifth wheel forward so the neck rests on the ramps so you don’t have to use the timber? As soon as we back under the neck we pull the fifth wheel forward and then drive away with the neck. That way the neck rests on the ramps. Wasn’t sure if your truck is any different

[@georgehasler142]

Really enjoyed the video it's nice to show the outher jobs that you guys do stay safe always

[@robertgad3269]

Looks pretty easy to get that low boy high centered at grade crossings and the like. Been a problem?

[@chrisread6103]

Now that was just Awesome, Trent. Thank you for this post! 👍🤜🤛

[@brandondevahl552]

This makes me really appreciate my Versamaxx

[@sluml0rd67]

Great vid, But dang noticed this was quinn Had no clue you where new to the 16 tire

[@tomuchfunwithgas846]

Az exit 1. Hello Trent.

[@robt2151]

Do you guys have any special training for moving the excavators and other plant, or do you just 'pick it up'?

[@michaelrocker9000]

Since this is a 3rd party transport do you make/keep a record of and dent or dings of the machine before loading? I only mention it because i did see a big dent in the unit.

[@joha7484]

merry Christmas Trent, 1 4 3 !!!

[@larrywall1642]

Some states require 5 pts of contact. The boom should have been tied as well.

[@kempo_95]

They tied the boom with a strap, you can see it at 21:50

[@larrywall1642]

If they have a wreck that strap is worthless. In their state that may be legal, 4 tie downs. In others not so much.

[@KeepingitAnalog]

How do you like the Cozad? I am considering ordering a few if them.

[@plazatowing]

Big fan of cozad. Haven’t had the chance to run a Murray but same concept would definitely consider a wide neck if I were to do it again. Also depends on your state and the permits they give you. With the 10ft spread and 16 tire grouping they give us 60,000 pounds on the trailer axles. Some states just say there’s 2 axles and don’t care that there is 16 tires. Loading over the back is also a nice feature. I’m a fan of your channel as well, keep it up!

[@KeepingitAnalog]

@@plazatowing I will check out Murray. Love your channel bud!

[@Keith_james7]

@@KeepingitAnalog Murray’s are real nice aswell. I run a 16 tire murrary and a 8 tire.

[@tomasbarroso5399]

All that for a mini x 😂😂😂

[@jeffbailey7765]

Good video… Trent put some hair around the hole to hit it … lol

[@lloydrobinson7081]

keep the clips coming

[@briananderson8733]

Good point on the height management. As for emptying junk from the bucket, Tell the truth Trent, You guys really like playing with big toys. Don't you?

[@GerakiGreek]

They found out from dads and you became dudes! tap!

[@senatorcongressmen2721]

what brand are those pants?

[@scottbecker3563]

This is the first time I've seen someone unhitch the gooseneck from the truck than detach the gooseneck from the flatbed than reattach the gooseneck to the truck. All the other videos I've seen other truckers always leave the gooseneck attached to the truck and than just detach the gooseneck from the flatbed... Is there something different about your trailer that I can't see??

[@adamt4742]

this is a manual RGN, no hydraulics to run the neck

[@jeremiemercier4955]

Wow you took this video in December of 2021 I think you’re a little bit late But amazing video 😊

[@kempo_95]

All of his recent videos are from December

[@jeremiemercier4955]

@@kempo_95 okay yes I know that

[@jeremiemercier4955]

@@kempo_95 I was just joking around lol

[@ronthompson3525]

That trailer is pretty cool. What’s the weight limit on the trailer axle’s. I’m guessing 60,000

[@bigdog8815]

Your given tandem weights without a permit and up to 82000 lbs loaded per 16 wheel group on max permit depending location

[@oscaramaya8599]

👍👍👍

[@tiredoldmechanic1791]

Don't they make a hydraulic neck for those trailers? You have hydraulics on the tractor.

[@banffdigger]

Hyd neck is quite a bit heavier and with a bit of practice and some hustle the mechanical neck isn't much slower if at all. Also I never had a hydraulic hose blow on a mechanical neck.

[@tiredoldmechanic1791]

@@banffdigger I've changed axles, differentials and power dividers from drivers trying to get under a mechanical neck.

[@waltk9067]

👍✌

[@davidharless7326]

What’s with the videos being uploaded 5 months late??

[@Leotheconstructionguy]

Probably because he is also a full time college student and working for plaza when he can

[@artyart31]

DECEMBER VIDEO😊😊😆

[@quantumss]

Chaining to the track is wrong. Just because everybody does it xxxxxxxxxxxxxxxxxxxxxxxx. You can put lipstick on a pig xxxxxxxxxxxxxxxxxxxx

[@nickihde8773]

Where is all the new videos

[@christopherluttrell3884]

Ishme more blog videos they're trying

[@dangarrison3503]

Why not load it over the back, saves time and wear and tear on the truck.....

[@plazatowing]

This was when we had the trailer for a very short time. We now have since mastered going over the back. Definitely a little scary at first, which is why we didn’t do it here.

[@dangarrison3503]

@plazatowing you can also slide the 5th wheel and you won't have to use that block of wood. Great video. I try only to break the neck down for pavers and stuff I can't go very the back with

[@movingearth3726]

That undercarriage sounds horrible!!!!!

[@iamReddington]

From December? I don't mean this to sound like I'm complaining, just vey surprised at how backlogged you are on uploads. Honestly Trent, you might need to find a dedicated editor and uploader.

[@sluml0rd67]

Not a fan of a Cozaddddddd Team Murry :)