@@dedreman2227 I have cut it out to a mp3 as a ringtone for my father-in-law when he's calling. shake hands with danger (Guitar riff)
@Kopihucky11 жыл бұрын
Love the narration... "if ya dont follow the safety rules"
@DanknDerpyGamer2 жыл бұрын
"The hard way is, well... kinda messy." As someone who lives near some of the most struck overpasses in the country, hoo boy is this true.
@lionking56878 жыл бұрын
Excellent. 35 Years Lowbeding with no regrets.
@scotter62864 жыл бұрын
I start this work Jan 2nd. Brand new and lots to learn
@Billycarl7110 жыл бұрын
Its never a waste of time to clean the tracks no matter how big or small of a company you are , one loose rock can kill someone . Chaining to the frame of a machine is always better but the tracks are ok also
@user-wk5bk1we8c4 жыл бұрын
I'm in college... But this is what I do with my time..
@mnmountainman93433 жыл бұрын
Nice man me 2 addicted to this stuff.
@Sdukes0013 жыл бұрын
This will teach way more than college
@craigbondy744 жыл бұрын
When putting a load on wider than deck should always flip out side extensions
@scummybagger42135 жыл бұрын
Two points to live by. One, if there is more than half the tracks or wheels are hanging over the sides outriggers are mandatory. Two, if your hauling a dozer with a blade 12 feet wide or more. The blade must be loaded to the rear of trailer. Couldn't see it well enough in video. But one of the dozers they drove on forward looked like it had a 12 foot blade.
@kenneththompson65435 жыл бұрын
Love doing it with my dad.. he retired now though
@memyselfandifarmer5 жыл бұрын
Sergei dratchev is the tie down king. Heavy haul.
@AryanDiablo5 жыл бұрын
Yes
@dt908914 жыл бұрын
Shake hands with danger. The og’s know this one.
@leosypher99934 жыл бұрын
I'm waiting for a machine to get done so I can load it onto my RGN, I'm watching videos on KZbin and I just so happen to run across this video
@MrRanvic6 жыл бұрын
Thank you for this video. I learned a lot.
@graceshiflett65265 жыл бұрын
reading up on how they transported SR-71 prototypes by truck to their testing ground is basically this to the extreme.
@markm196411 жыл бұрын
SAVES THE TURBO FROM DAMAGE DO TO WIND SPINNING THE TURBO WITH NO OIL PRESSURE
@aaronabney89246 жыл бұрын
hellbilly hellraiser Thats a old wise tell the air going down the exhaust isn't enough to spin the turbo I've been pulling RGN for 4 years never once had a problem
@brian28263 жыл бұрын
With the baffles in the muffler on most exhaust systems as well as non direct travel for air around curves and bends in the exhaust pipe. It's extremely unlikely that you'd ever Spin a turbo on a new machine. I've never had it happen in 12 years.
@markm19643 жыл бұрын
@@brian2826 what ever dude some they make exsuast socks just for equipment haulers cat or john deere will void warrantys i been in bus^business over 40 years
@timpattydaechsel5988Ай бұрын
@@markm1964have you actually ever heard turbo bearings being damaged by dry spinning because of windmilling? , not in my 45 years moving equipment ….. old school thinking that I’m glad is fading away
@rafadsalah82468 жыл бұрын
that is really useful thanks guys .
@carlnapp86738 жыл бұрын
Teaching safety is one thing. But filming a scraper being loaded with a guy on it, that's spooky! By the way, lovely Macks.
@marshall57627 жыл бұрын
Lovley Macks indeed.
@bbautowrecking65606 жыл бұрын
The driver wouldn’t be able to see the guy guiding or the trailer the guy guiding is on a platform that is secure and he is holding on tight but ya kinda scary
@KAKApoopooPEEPEE35 жыл бұрын
Nice Trail Kings
@HVETCamrose8 жыл бұрын
Great video, thank you !
@hartejjohal28652 жыл бұрын
Looks like pictured in 90’s
@cheetotruckinwithjesus60135 жыл бұрын
Fixing to load a 29 ton Front End Loader can't wait
@tsixclerk4 жыл бұрын
Sounds like Joe Elmore from Horsepower T.V. I think he also did voice over.
@mnmountainman93433 жыл бұрын
Dang I haven't seen that show in around 9 years
@blainekopp89889 жыл бұрын
This is team work, and Hevey heavey Equip. like an a operators. that operate these big ones doing their job for all , the roads we all drive on and enjoy , somuch is taken for the seens!!!
@jimkunce5519 жыл бұрын
what !
@Only-one-life-685 жыл бұрын
Thank you
@Del-Canada4 жыл бұрын
The narrator sounds like Hoyt Axton. He died in 99 but this film was likely produced a few years before the release date.
@InjunOutdoors12 жыл бұрын
Is that Al from Home Improvement acting as the spotter????? : )
@Del-Canada4 жыл бұрын
Looks like him. But Al was already pretty famous by the time this film came out. That was a good show.
@pauleyperrettefan11711 жыл бұрын
you know i couldnt tell you i just do things my way and hope nothing bad happens and i dont get pulled
@JavyerMendes3 жыл бұрын
American Truck Simulator: Lowboy Trailers Brought me here.
@pauleyperrettefan11712 жыл бұрын
yea i hook the chains to the tracks all the time. it works a little better and its quicker.
@pete359ext12 жыл бұрын
@bleedeye101 Yah its prety common at the company i work for we use the tracks to tie down the equipment and if theres eyelets then we use them but the tracks seems to work good havent lost a machine yet.
@nchayfarmer11 жыл бұрын
You do not chain to the tracks on any piece of equipment they can and will move and they bend very easy (learned the hardway bent the hell out of a track on a d7 wide track) theres always better and actually faster ways than a binder from the track to the side of the trailer.
@scummybagger42135 жыл бұрын
Routing on permits is not the responsibility of the drivers ,,, even owner operators. You call permit company and let them know what you're hauling and it's weight and dimensions and where you are going to and from and they figure out all the particulars.
@bmack77625 жыл бұрын
Good to know. I'm leaving LTL and starting construction this summer. First time lowboy driving for me. I'm looking forward to it but a little nervous even though I've been driving for 5 years...
@nerdyclown63934 жыл бұрын
@@bmack7762 hey there! How has your experience been? Any tips you can share with me?
@bmack77624 жыл бұрын
@@nerdyclown6393 It went very well for me although my company trained me for one day Haha. I had to learn a lot on my own, especially loading the equipment on myself never having seeing the machine before in my life, but was successful. If I had to give any advice it would be to make sure you take your time and really think about what your doing before you do it!
@bleedeye10112 жыл бұрын
Is hooking chains to the track the usual thing to do? I've never been involved in loading heavy equipment, but it seems like it would be better to hook to eyelets on the body of the machine. Maybe hooking to the track is in addition to eyelets.
@Sdukes0013 жыл бұрын
This is awesome information
@blainekopp89889 жыл бұрын
Time of year, frost cold iron decks on trailer!! the dirt on the eq. tracks and the bed??
@meseahunt4 жыл бұрын
good video
@farmerrichard14485 жыл бұрын
Keep making these
@archie97712 жыл бұрын
porportionation is key
@internazisuite3 жыл бұрын
Making a good point about center of gravity with these machines but to control that you cut the angle on the ramp coming up using wood blocks and old mud flaps or conveyor rubber..that way the tracks are never up in the air and come down hard which can spit a track roller? maybe im fron another planet but thats how i did it and never lost one
@zhentrixcalipso27388 жыл бұрын
25 ton crane?
@melbrixbacudo72085 жыл бұрын
Here in the philipines we dont nees spotter,your going to know its not right when the equipment is already upsidedown
@MrDriftspirit11 жыл бұрын
the people who produce those safety instructions do only think theoreticly and have no clue how hard it is to lead a own small company. you can`t wait for better weather or clean up the tracks in front of loading or anything else.if you do so at each site, you can close your company after a few month when cash has ended.
@MrDriftspirit11 жыл бұрын
ingermany its forbidden to save tracked vehicles at the tracks with chains or anything else. they`re not created for load saving. you have to lock the chains anywhere at the frame or the shield or the cabin if the producer says in his instruction book that its ok.and what should you do at loading when you have a semitrailer with a height of 80cm and a construction site where the fllor isn`t plain and the tracks are muddy or snowy.
@MrDriftspirit11 жыл бұрын
and if every thing is save, no one destroys something, injures himself or others, for what the hell is there a medicall equipment and recovery industry for hundrets of billions of billions of dollars! what will then all the people on the overcrowded and unemployed doctors and nurses do!?
@menslady125eif2590 Жыл бұрын
🎶Ba-dow ba-da-bow bow!🎶 👷🤝⚠
@Biggertonka12 жыл бұрын
Sounds like Johnny Cash to me, maybe...
@Mike-ij5hn Жыл бұрын
11 years ago you “might” get away with hooking to track 2023 will get you a violation every time Did you notice how much that shoe moved as he was tightening the binder? Imagine what would happen if you were rolling and had to perform an evasive maneuver. I’ve seen em snap off
@wi11y196011 жыл бұрын
I know what it does, yet does anyone see it being done in the video?
@MegaCamshaft12 жыл бұрын
the way i do it is,,,,if its a short move,,(haul),,,i'll just boom the tracks down,,,,,but if its a long move,,(haul),,,i'll boom the tracks down and chain the rippers down and the blade,,,,,i really dont like useing a chain cause the chain gives,,,,it streches and ratchet booms dont
@jiangtaoliuzade-evc11 жыл бұрын
不错的视频!
@Deredeo5 жыл бұрын
um....clamping the equipment to the trailer by the tracks just can't be right...
@Pistachio.Disguisey5 жыл бұрын
Yep thats right
@McGillicutty8811 жыл бұрын
Is it legal to just use a binder from the track to the rail on the trailer. Or do you need a binder and a chain.
@cesar94966 жыл бұрын
Yes it's legal.
@gregbaker22785 жыл бұрын
It's ok, but not the safest! A chain should be added because binders break b4 the give, and a chain will give a bit!
@bmack77625 жыл бұрын
The dude abides
@195019524 жыл бұрын
Shouldn't be using the tracks as a anchor point
@aaronabney89245 жыл бұрын
I do heavy haul I never have spotters seems people are too sorry to spare 3 minutes of their time but when you run over the owner of the construction company you're delivering to you're the bad guy
@wi11y196012 жыл бұрын
Any one see any taped equipment exhaust pipes?
@jtee5826 жыл бұрын
i believe i hear jack from heartland
@codygreen16734 жыл бұрын
The cleanest best pleasure
@renzo75036 жыл бұрын
Heavy Iron!!!!! Yeah!!
@lottsalasagna4317 жыл бұрын
You safety boys crack me up
@levi9kirk4 жыл бұрын
Out of WHAK
@dgarr6412 жыл бұрын
@pauleyperrettefan117 Hook em to the tracks and go...
@OMBIC10 жыл бұрын
I will remember this the next time I see my X Girlfriend.....