[916] Abloy 341 “Enforcer” Padlock Picked and Gutted

  Рет қаралды 609,772

LockPickingLawyer

LockPickingLawyer

5 жыл бұрын

Пікірлер: 1 000
@eak125
@eak125 5 жыл бұрын
When you don't hear the words "Not too hard a pick" from LPL it's bound to be near impossible for anyone else.
@kevinprice2274
@kevinprice2274 5 жыл бұрын
True.
@Azguella
@Azguella 5 жыл бұрын
And like he said trying to do it solo while holding the lock makes it alone impossible
@kevinprice2274
@kevinprice2274 5 жыл бұрын
@@Azguella Don't be too sure about that. A thief might have an accomplice holding the lock for them. Or a padlock might be stably positionend by itself.
@Azguella
@Azguella 5 жыл бұрын
@@kevinprice2274 Did you even read what I wrote? "trying to do it SOLO" and getting them stable depends on where they are put on
@Bodragon
@Bodragon 5 жыл бұрын
@@Azguella @Kevin Price is either a complete bozo, or else he's just new here. >
@islander959
@islander959 5 жыл бұрын
"people often asks about locks that i would use" 😲 WE'VE BEEN BEGGING EVERYDAY 😭
@chitoryu12
@chitoryu12 4 жыл бұрын
@WhyMaro LPL is basically Lockpicking 100 in real life. The number of locks he's failed to break is like, 2. Maybe.
@medes5597
@medes5597 4 жыл бұрын
@@chitoryu12 nah he's not that good. Browse some locksport forums and he's a bit of a controversial figure because a lot of locksport people don't think he's particularly great but because he's popular they feel like there's a perception he's much better than he is. The general consensus is "Good but no better than anyone else who is the same age" which is to say he's not particularly notable outside of his KZbin channel. However i like LPL and feel like there's a bit of jealousy in the locksport community. But he's definitely not "100 at lock picking", more like 60/70 in lock picking.
@damon2056
@damon2056 4 жыл бұрын
@@medes5597 I'd agree there's probably jealousy but he doesn't say he's a master lockpicker, he doesn't talk like he's one it's more the viewers that meme how good he is or say he's a master lockpicker and I'm not him so I can't say for certain but I think he just generally enjoys his hobby and wishes to teach people and/or share his love for the hobby. Edit: I'd also like to add that anyone can say anything on a forum without having to prove anything whereas LPL picks and then guts probably most of the locks to prove on video there's no bullshit and he's not replaced pins or removed them to make the lock easier to pick.
@nuggert
@nuggert 4 жыл бұрын
@@medes5597 guys like bosnianbill are jealous of his talents that says a lot. And most users of locksport forums can't crack a peanut butter sandwich let alone a kw1
@medes5597
@medes5597 4 жыл бұрын
@@nuggert I like LPL but he's more like a popular face for locksport than anything else.
@MollyWinter
@MollyWinter 5 жыл бұрын
"Hey there, friend, could you hold this for me?" "Sure, but wh-" "Nice click out of six..."
@justadudeffs
@justadudeffs 5 жыл бұрын
I’ve been using Abloy Enforcers for 12 years on my trailers. Basically the worst case scenario for any lock as they’re constantly moving around from bumpy roads and subject to all the rain, snow, mud, sand and god knows what else I’ve thrown at them in 1.5 million miles and 12 years. I’m on my third (current one is almost 7 years old) and I had to cut the other two after losing keys on the road (my failure not Abloy’s obviously). So yeah, they’re almost impossible to pick, you’re not cutting one off without an angle grinder and a lot of time, and with a little lock lube and minimal care they last pretty much indefinitely. There’s a reason they’re one of most used locks in our industry. Trucker approved for sure 👍
@justadudeffs
@justadudeffs 5 жыл бұрын
Disclaimer: Since that kinda sounded like a commercial I should point out nobody’s paying me to say the above, those thoughts are all mine.
@DanBowkley
@DanBowkley 2 жыл бұрын
Absolutely agree, I've got over 1M on my current Abloy 350 and it works like new. Basically every trucking company with more than maybe 10-20 trucks buys these in bulk and issues them to all their drivers, and there are plenty of reasons for that.
@RedWhiteAndBlue4evr1
@RedWhiteAndBlue4evr1 2 жыл бұрын
Yep. My company issues them to every driver. Theyre expensive to replace so it hurt when I forgot mine on a drop n hook. I went back the next morning but the customer had used a grinder on it. I didnt tell my employer, just bought the best lick i could find at the next truck stop. I quickly saw the EXTREME difference in quality. The store lock said HARDENER on it, but it was flimsy and after only 2 weeks of use I almost coukdnt unlock it one day. Had to spray copius amounts of WD40 in ot just to get it off. Carried on like that for a month before accepting the $65 replacement fee was worth it.
@notanotherusername
@notanotherusername 2 жыл бұрын
What kind of lock lube?
@timschulte6371
@timschulte6371 2 жыл бұрын
makes sense that they're popular with truckers. I found mine while sitting in traffic. someone had left it on the concrete highway divider.
@DragonKastle
@DragonKastle 5 жыл бұрын
99.999 of population could not pick this lock. The special tool and intricate knowledge of the lock needed is a killer. I would buy this lock.
@Lrripper
@Lrripper 5 жыл бұрын
Yes plus he needed the lock to be steady.
@saxtremer
@saxtremer 5 жыл бұрын
You don't need to pick the lock to defeat it. All it takes is probably 15 to 20 seconds with a decent cordless die grinder, because the shackle is not protected. There is no need to improve the core any further except for a lockpicking competition.
@JaakkoF
@JaakkoF 5 жыл бұрын
@@saxtremer There is on veey good reason to improve a core: To get the lock to be tamper evident. If it is diffuclt/impossible to pick, there is more likely to be an actual break-in, thus leaving physical evidence of entry. You see your lock on your door every day. When did you last test it was still the same lock or how do yu know someone hasn't gained entry by picking the lock?
@mikakorhonen5715
@mikakorhonen5715 5 жыл бұрын
I worry those 0,001. There is still 77000 people who can pick this lock and 55,2 from those are here in Finland. :(
@magisch430
@magisch430 5 жыл бұрын
@@mikakorhonen5715 considering like two thirds of all locks can be shimmed or raked by a child that you gave a prybar and waverake to, that's a heck of an improvement. Also, you can probably assume that most people who can pick something like this are highly resourceful locksmiths or enthusiasts who don't really go around stealing shit by picking locks. An actual thief has a buffet of 5-10 second entries to choose from, they don't go for the hard mode for no reason
@chrispeter07
@chrispeter07 5 жыл бұрын
From now on you should refer to the vice as "friend"
@Pheonix19581
@Pheonix19581 5 жыл бұрын
You really got my balls in a friend here man
@Alexander_l322
@Alexander_l322 5 жыл бұрын
@@CPT_Nelson I think it would be Miami friend, not plural.
@CPT_Nelson
@CPT_Nelson 5 жыл бұрын
@@Alexander_l322 Fixed! :D
@Zebra_M
@Zebra_M 5 жыл бұрын
Stick some googly eyes on it and nobody could ever complain that it isn't
@Mr.Adhesive
@Mr.Adhesive 5 жыл бұрын
"Thanks for watching. Keep your dick in a friend."
@IronicMedic
@IronicMedic 5 жыл бұрын
Sales for this lock about to go up with the LPL endorsement
@shanewiley9190
@shanewiley9190 5 жыл бұрын
They sale these locks by the hundreds of thousands if not more every year. It is the standard for transportation companies to secure loads. And alot of insurance companies require this lock on high value loads.
@Abbyyzz
@Abbyyzz 5 жыл бұрын
Stonks
@finbenton
@finbenton 5 жыл бұрын
This lock has the very old classic core, its not the one you want, newer abloys have much more secure cores than this like protec2 core.
@dlevi67
@dlevi67 5 жыл бұрын
@Lassi Kinnunen "thingy" = vempele? (one of two words I know in Finnish!)
@BrokenBirfield
@BrokenBirfield 5 жыл бұрын
@@shanewiley9190 Also common to find these on vending machines.
@Jodlauspc
@Jodlauspc 5 жыл бұрын
I built these locks and their other padlocks. They're assembled by hand. Great workplace and great locks.
@flamingosalad3541
@flamingosalad3541 5 жыл бұрын
every country is jealous of our locks, because our locks are the greatest. We are going to impose trade tarrifs on our locks to our market competing nations and our allies. We're going to make padlocks great again.
@dlevi67
@dlevi67 5 жыл бұрын
@@flamingosalad3541 Would you mind locking a few Brexit doors with them?
@manuhonkanen2111
@manuhonkanen2111 5 жыл бұрын
Hyvät työkaverit tekevät paikasta kuin paikasta mahtavan!
@JohnDoe-bd5sz
@JohnDoe-bd5sz 5 жыл бұрын
@@dlevi67 Yeah, because that would be the fair thing to do. That democracy shit is real stupid anyway....Atleast when the result is not the one that YOU want.
@justingauche6475
@justingauche6475 5 жыл бұрын
@@flamingosalad3541 yup good job Sweden, you put your own well being first, in pretty much everything for 1000years, don't bash the usa for wanting to do the same. Time for the rest of the world to put their daddy pants on and pull their own weight.
@odentin23
@odentin23 5 жыл бұрын
That lock put up a hell of a fight for a master-keyed system with discs that are a "disappointment."
@bdf2718
@bdf2718 5 жыл бұрын
And requires a purpose-built tool that few criminals will have.
@matthewpiper4328
@matthewpiper4328 5 жыл бұрын
@@bdf2718 Doesn't require, just makes it a hell of a lot easier.
@bdf2718
@bdf2718 5 жыл бұрын
@@matthewpiper4328 Even with the tool, it wasn't that easy. As the OP said, it put up a hell of a fight.
@matthewpiper4328
@matthewpiper4328 5 жыл бұрын
@@bdf2718 notice I said easier, not easy.
@sillykristy
@sillykristy 5 жыл бұрын
You're not gonna be picking this with a screwdriver and a bobby pin.
@joefreer
@joefreer 5 жыл бұрын
.....
@2ShotsDown
@2ShotsDown 5 жыл бұрын
Its a 200$ lock.
@DG-qq6gz
@DG-qq6gz 5 жыл бұрын
The employees of Police Plaza still has doubts about this lock.
@johnfrancisdoe1563
@johnfrancisdoe1563 5 жыл бұрын
NYC10038 I think it's the old weaker model...
@Jaroneko
@Jaroneko 5 жыл бұрын
@@2ShotsDown Interesting. It's a 60€ lock here in Finland.
@joefreer
@joefreer 5 жыл бұрын
@@DG-qq6gz ?
@TruckingBryce
@TruckingBryce 2 жыл бұрын
If you’re curious as to why it is masterkeyed . Most enforcer locks are used by trucking companies to secure loads. Our companies have a master key on top of our key we have.
@skatman3278
@skatman3278 Жыл бұрын
Had these on our ISO containers in Afghanistan. We lost the key to one of them. Blunted a pair of bolt croppers - actually bent the pincers. Got the fire service out to angle grind. They went through two disks and it took them about 30 minutes. Very impressed with these.
@electronicsNmore
@electronicsNmore 5 жыл бұрын
These are great padlocks. I bought one years ago. Great video!
@14bqdonk
@14bqdonk 3 жыл бұрын
yepp!
@proverbs2927
@proverbs2927 2 жыл бұрын
Railroad term for these locks are “Switch Locks”.
@dragonl0l
@dragonl0l 2 жыл бұрын
When a lock takes longer than 60 seconds from LPL you know its a godly lock
@Juhuuu
@Juhuuu 5 жыл бұрын
That seemed like an impressive challenge, even for you. And to think in Finland, this core is typically used in lower security applications like mailboxes and such. Most exterior doors have at least execs in them.
@JaakkoF
@JaakkoF 5 жыл бұрын
Execs are just as easy to pick, or even easier ;)
@mandc20022
@mandc20022 5 жыл бұрын
But everything in Finland is better than China or even the USA
@TonySLocks
@TonySLocks 5 жыл бұрын
All Abloys are really hard to pick. Ridiculously easy to drill though, so they don't offer much security in reality
@tarehjernetarehjerne4082
@tarehjernetarehjerne4082 5 жыл бұрын
TonyS Locks unprotected yes, but most of them have hardened spinner discs.
@poika22
@poika22 4 жыл бұрын
I got a simple lockpicking kit as a teenager and it was a real shame realizing every lock in Finland is some sort of Abloy unless you go out of your way to buy a cheap 1€ lock to practice on. In the US even residential buildings often use those simple pin locks like you see in youtube beginner tutorials or video games.
@mattikaki
@mattikaki 3 жыл бұрын
I’m proud to be a Finn, once again. And it was good to hear that the Abloy Classic takes that long to pick. I have tweekied Abloy locks for 55 years and really like them. They are very clear and easy to rekey and also masterkey. That was interesting to hear that those Chinese cheapos can’t pick this if it has the anti pick disk. If I try to recall, those have been very common for decades. Next I have to make that beautiful tool of yours. We have our own traditional pic called ”Vempele” made by a smart thief very long time ago. It looks like that of yours.
@zacchambers2418
@zacchambers2418 5 жыл бұрын
I thought you were going to rekey on camera, but now I realise that would just be dumb.
@MsLinaTina
@MsLinaTina 5 жыл бұрын
It would be neat to see how rekeying is done though. Maybe on one of the practice locks where it wouldn't matter.
@zacchambers2418
@zacchambers2418 5 жыл бұрын
@@MsLinaTina yeah that would be awesome
@johnfrancisdoe1563
@johnfrancisdoe1563 5 жыл бұрын
zac chambers He could just rekey for a practice key, then rekey again off camera.
@Jaroneko
@Jaroneko 5 жыл бұрын
@@MsLinaTina It really is just the reverse of gutting. You take the discs you want as your new key, assemble them into the core and re-insert the core. Play backwards from 8:20 to 5:00 and you've basically got the rekey to the original key.
@MegaJoojee
@MegaJoojee 4 жыл бұрын
@@MsLinaTina Ihad to experience it once. with similar lock core as this, tho it was on door. it got jammed totally and I had to call an abloy crtified lock smith, he had a special drill bit to just drill the whole core out, and then he just lookd at my key and took a box thst had a buch of those discs and just assembly a new lock notjing special, like putting some legos to gether, it took like 10 minutes and the lock was like a new!!
@floatinggoose9197
@floatinggoose9197 5 жыл бұрын
Lock Company's should get Awards if they're locks makes it past the 90 second mark on this channel
@bdf2718
@bdf2718 5 жыл бұрын
Yeah, replace that star system they use with an LPL time.
@kguy6635
@kguy6635 3 жыл бұрын
@@bdf2718 just a sea of "under 15 seconds", the occasional "30 seconds", and one or two "minutes"
@_Ekaros
@_Ekaros 2 жыл бұрын
With 100 year old design... What have the other companies been doing all this time?
@niccatipay
@niccatipay 5 жыл бұрын
LPL takes more than 2 minutes to open the lock on a vice with a special tool and expreience. Lock company: *Stonks*
@UnprofessionalProfessor
@UnprofessionalProfessor 11 ай бұрын
Master lock: "I see nothing, I know NOTHING!"
@ValentineC137
@ValentineC137 5 жыл бұрын
LPL: "finally a worthy opponent our battle will be legendary"
@SP-df1nm
@SP-df1nm 4 жыл бұрын
And short
@Dodge0359A
@Dodge0359A 5 жыл бұрын
I use a handful of these locks on a daily basis in my job... They're reliable, very heavy-duty, and can also double as a weapon if necessary lol. Thanks for putting out a video about these locks.
@GetIsekaid
@GetIsekaid 4 жыл бұрын
What do you do for a living?
@chickenfriedbobcat6090
@chickenfriedbobcat6090 4 жыл бұрын
@@GetIsekaid Employed at "Sweet granny goose's daycare and child sitting services".
@screwfist
@screwfist 3 жыл бұрын
Probably a semi truck driver
@CallinWire
@CallinWire 4 жыл бұрын
2:04 "I'm tensioning off of ten." Me: "Did he say TEN??!!"
@jr3623
@jr3623 5 жыл бұрын
love it when we get to : "not sure what's holding us up" only to have the lock open a few secs later 😂😂
@macforme
@macforme 5 жыл бұрын
Those are the magic words he uses to get the lock to stop resisting....
@VtheWizard
@VtheWizard 5 жыл бұрын
Can't gell you how wide my grin is right now. LPL taking more than a minute to pick a lock and complementing it... I did not think I would feel pride to be from the same country as some lock...
@johnstarkie9948
@johnstarkie9948 Жыл бұрын
To ‘complement’ is to complete. To ‘compliment’ is to praise.
@JaakkoF
@JaakkoF 5 жыл бұрын
You could have removed the set screw, closed the lock and locked it to remove the tool and then unscrew the core cap to disassemble :)
@lockpickinglawyer
@lockpickinglawyer 5 жыл бұрын
Jaakko Fagerlund I realized that as I was unscrewing the retainer, then decided not to draw attention to my mental lapse. 😜
@Zorkz
@Zorkz 5 жыл бұрын
Abloy are the only locks we have in finland so it's good to hear you like them
@Zorkz
@Zorkz 5 жыл бұрын
Also have you ever tried picking abloys newer design? Their first used to be like the one in the video but a little bit bigger and the flat part of the D was curved aswell. Their newest one is almost hourglass shaped
@tinpicker8688
@tinpicker8688 5 жыл бұрын
@@Zorkz protec 2?
@gary_rumain_you_peons
@gary_rumain_you_peons 5 жыл бұрын
What about Assa?
@Zorkz
@Zorkz 5 жыл бұрын
@@tinpicker8688 Yeah that one
@Zorkz
@Zorkz 5 жыл бұрын
@@gary_rumain_you_peons that's the same thing as abloy
@specialkali
@specialkali 2 жыл бұрын
I immediately went to see how much they cost and was shocked! Might buy one for my man as a gift. If it is LPL-approved he will love it, we love these videos!
@Madcapolo
@Madcapolo 4 жыл бұрын
Wow, I guess my company made a damn fine choice to lock up semi trailers. Ive had the same Abloy since I started trucking and for 8 months this thing ridden on the door clasps of my trailers, being horrendously jostled and rocked for 10 hours a day as I drive and the only damage so far is a couple chips out of the top of the pad. I knew it was a tough son of a bitch, but I didnt know it was LPL approved
@KagaminaraShikatsu
@KagaminaraShikatsu 5 жыл бұрын
Nice steady friend you got there :) Good content as always !
@nopenope7184
@nopenope7184 5 жыл бұрын
Stable friend? I didn't know he was a rancher.
@KagaminaraShikatsu
@KagaminaraShikatsu 5 жыл бұрын
@@nopenope7184 Damned, edited. The moment when you switch languages for one word and it f*cks up your sentence ._. Thanks though :D
@nopenope7184
@nopenope7184 5 жыл бұрын
@@KagaminaraShikatsu I meant it more as a joke, but that's ok.
@ouzoloves
@ouzoloves 5 жыл бұрын
Stable friend, was a perfectly acceptable phrase. It just so happens that it could also refer to a horse
@KagaminaraShikatsu
@KagaminaraShikatsu 5 жыл бұрын
@@ouzoloves Got it, thanks for that :3
@Jyoungblood64
@Jyoungblood64 5 жыл бұрын
The company I drive for uses these locks on our trailers during transport. It's refreshing to both see its pick resistance and to see it get the LPL endorsement.
@williambaker1753
@williambaker1753 3 жыл бұрын
Love your videos. I'm a maintenance technician and everything I have learned from your videos has been very helpful. Thank you for sharing all your knowledge.
@UdderrButterr
@UdderrButterr 3 жыл бұрын
We have Abloy 350s at my place of work for when higher security is needed off of the warehouse premises, and I dropped it on my foot once. I got a pretty nice click out of 2 and some good binding on 3 for the next couple days. And I'm not talking about the lock.
@AThreeDogNight
@AThreeDogNight 5 жыл бұрын
Finally a tear down of a good lock, thanks LPL. Nice job on the open as well.
@whats0my0agenda
@whats0my0agenda 3 жыл бұрын
You know it's a badass lock when LPL spends 4 mins on a lock trying to pick it, instead of the usual 20 seconds.
@uvs707
@uvs707 3 жыл бұрын
1 was given 3 of these years ago. They are hard enough to open with the key let alone a pick! I've only ever toyed with basic stuff, I appreciate the skill involved watching your videos.
@emptycl0ud9
@emptycl0ud9 2 жыл бұрын
Thank you for your recommendation! You just saved my bike from being stolen! A break in happened in our building's storage room and they broke the hasp thankfully the lock held up!
@CraniumSlows
@CraniumSlows 5 жыл бұрын
When he says I haven’t done this before it’s so exciting! This was a great episode.
@Laffen47
@Laffen47 5 жыл бұрын
You usually open locks in the same amount it takes me to open a can of coke, this must be one hell of a lock
@bjornsans4935
@bjornsans4935 5 жыл бұрын
Another excellent video. I also appreciate you mentioning what locks are better or best. The rest of us "normal" humans need feedback to what is a really good lock.
@McRib69420
@McRib69420 Жыл бұрын
Best lock you can have as a truck driver. Been using these for five+ years, even had someone try to slice through it with a torch and bolt cutters and you could barely tell. These put up with a lot of dirt, rain, snow, ice, etc being in travel most of their lives and work flawlessly through it all.
@CheshireTomcat68
@CheshireTomcat68 5 жыл бұрын
Great seeing an expert challenged in their respective vocation for once!
@angrysodacanz
@angrysodacanz 3 жыл бұрын
"were going to pretend this vice is a friend-" hit too close too home
@mpferguson0416
@mpferguson0416 3 жыл бұрын
*smiles at drink in hand* Help me
@philipinchina
@philipinchina 3 жыл бұрын
I use Abloys here. I have several. I am pleased to see that they are such high security. They are very well made and simple to operate, key retaining padlocks.
@thetraindriver01
@thetraindriver01 5 жыл бұрын
Really nice to see you recommend a lock... thank you 😜👍👍👍
@dazevers
@dazevers 5 жыл бұрын
Awesome job both on the pick and the picking of that Abloy Classic.
@lockpickinglawyer
@lockpickinglawyer 5 жыл бұрын
Daz Evers Thanks, though credit on the pick mostly goes to HuxleyPig. 👍
@j.a.4360
@j.a.4360 5 жыл бұрын
Like I told Bosnian Bill, this is much better than politics. Thanks for the meditation.
@sktakis
@sktakis 5 жыл бұрын
Using this tool makes you understand every movement if you pay attention at the hole on top of the tool. I love seeing you picking locks that dont have a key its like a mystery 😁😁
@JeepinBoon
@JeepinBoon 4 жыл бұрын
What a lock! Took me a little over 3 hrs to pick the 341 with the chinese knockoff tool. Now to put in a new core and have a fine, usable lock. Perfect video to get these locks usable for a fraction of the cost of keyed locks.
@Tripp426
@Tripp426 4 жыл бұрын
I found this relaxing to watch.
@jpe1
@jpe1 5 жыл бұрын
What I find bizarre is that this lock is commonly used in Finland for low security applications, and they use even better Abloys for “more important” stuff. Is Finland a nation of sport pickers or something? I would think picking is the *least* often used method of defeating a lock.
@JaakkoF
@JaakkoF 5 жыл бұрын
Well, Abloy has been here for over 120 years, so "buy finnish" :)
@johnfrancisdoe1563
@johnfrancisdoe1563 5 жыл бұрын
John Early It used to be that only a handful of people could pick these. But Finland has lots of rural locations far from the nearest police response, so locks need to delay burglars for a lot longer. LPL and other skilled people can pick this in 2 minutes, so only good where police can respond in 2 minutes.
@dlevi67
@dlevi67 5 жыл бұрын
@@johnfrancisdoe1563 It would take far less than 2 minutes to grind through the spinner and the discs... and a lot less skill.
@paweskarzynski8068
@paweskarzynski8068 Жыл бұрын
@@dlevi67 Sure, just you don't always wish to be heard.
@dlevi67
@dlevi67 Жыл бұрын
@@paweskarzynski8068 That is true; the Finns are very good shooters!
@brlamb5
@brlamb5 4 жыл бұрын
I'm a truck driver for a LARGE U.S. carrier, they use Abloy pad locks just like this but with a different key shape. Great to know these locks are LDL approved =) You should get your hands on a kingpin lock and try and get it off while attached to a trailer!
@GaryCameron780
@GaryCameron780 5 жыл бұрын
I've never seen this style of lock gutted before. Thank you.
@mycallingb621
@mycallingb621 2 жыл бұрын
I found this exact lock on the ground in a loading dock with the key in it. I could tell it was a good lock by the way the key felt inside it.
@UnprofessionalProfessor
@UnprofessionalProfessor 11 ай бұрын
What did you do with it?
@00lightning
@00lightning 5 жыл бұрын
I have an abloy 341 with no key also, but I completely lack the skills to get into it non destructively.. if you want another one your welcome to have it..
@lockpickinglawyer
@lockpickinglawyer 5 жыл бұрын
Russell Warren thanks for the offer, but I just got five of these without keys for $20. I’m set. 👍
@00lightning
@00lightning 5 жыл бұрын
@@lockpickinglawyer no problem.
@brentadams28
@brentadams28 4 жыл бұрын
I’m trying to learn and am trying to find ones on eBay and whatnot. What sort of $ do you want?
@Rocketlockopener
@Rocketlockopener 5 жыл бұрын
This video is the first time I have seen a legitimate pick of an alloy Incredible!
@Nugsutuksis
@Nugsutuksis 3 жыл бұрын
Always straight to the point, always crediting the rightful people, always saying the video number when referencing own video. Goddamn, most professional youtuber, HANDS DOWN.
@jaymassengill3340
@jaymassengill3340 5 жыл бұрын
I bought one of these in a thrift store with one key. Had to struggle to keep my poker face from breaking into a big grin before I got out the door!
@nathantaylor9998
@nathantaylor9998 5 жыл бұрын
Haha these are the locks my work uses for semi trailers.
@Jyoungblood64
@Jyoungblood64 5 жыл бұрын
Ours too. Prime inc.
@marmaladejam8602
@marmaladejam8602 4 жыл бұрын
Well nice to know Swift got something right...
@nikkiewhite476
@nikkiewhite476 2 жыл бұрын
Awesome to see the inside of a disk detainer lock now I have to continue going through your archive to see if there is a wafer core deconstruction lock so I can see the inside of one of them!
@ChocoboJoe85
@ChocoboJoe85 3 жыл бұрын
These locks are as standard where I work. I work for an electricity distribution company and all the gear and buildings are protected by several of these locks at a time. The ones we use are the newer protec 2 cores. I know they are very expensive but are clearly brilliant for their purposes. I am lucky I have a master key for these locks as I sure as hell would hate to pick one! Great job btw LPL
@WanderingCrow
@WanderingCrow 5 жыл бұрын
Your friend Vice has such a strong grip! :D
@Halfstep2024
@Halfstep2024 4 жыл бұрын
I’ve used these for years but damn.. I never knew they were THAT badass. I mean to lpl they may not be too big of a deal but any lock that makes it past 3 minutes on an lpl video that he says he uses is a true boss level lock lol
@bigz4349
@bigz4349 3 жыл бұрын
I work in a distribution center, and whenever we get a trailer that they forgot to unlock i get the pleasure to come and delock it. Well low and behold, I came upon this beaut. The 4 foot bolt cutters weren't doing the trick so I quickly moved on to the angle grinder. Had the lock off in less than a minute. But as soon as I saw what the core looked like I immediately wanted to see if LPL had already picked it. I knew it was going to be a step above the rest, but I didn't know it was going to be such a gem. Going to add it to my broken lock collection in my toolbox 😁
@philipwheeler7317
@philipwheeler7317 2 жыл бұрын
They drop the trailer?? Because that is a $$ lock. Just ask the driver to remove it.. just saying as a trucker I'd be pissed if ya cut up my locks.
@charleswooters
@charleswooters 4 жыл бұрын
Omg I think this is the only lock that I got to pick before you. But I'm pretty sure you put it back together before me. I pick this lock when I lost my key somewhere in the mud but had a key from another lock but no core got super lucky that all to do was change the discs in a different combination. Boom I had a key and a lock that worked with no spare parts. I was already lucky just to pick it. Finding the way to pick it without a nice tool was hard enough. Awesome video wish it was out like 5 mouths ago would have came very handing but all good. 🔧🔩 thank you love your videos.
@zyzzy1944
@zyzzy1944 5 жыл бұрын
It would be interesting to see how you make the specialized tools you use for picking. Jack
@ExTechOp
@ExTechOp 4 жыл бұрын
LPL and BosnianBill have a 6-part video series about creating this tool which they hope will in the future be made by a lockpick manufacturer. The series starts with LPL video [823].
@staglomagnifico5711
@staglomagnifico5711 5 жыл бұрын
Keep your lock in a vise!
@lockpickinglawyer
@lockpickinglawyer 5 жыл бұрын
Ave?
@markleng67
@markleng67 5 жыл бұрын
@@lockpickinglawyer You are skookum as frig!
@JaakkoF
@JaakkoF 5 жыл бұрын
@@lockpickinglawyer Chooching them doll hairs
@henrythorpe8447
@henrythorpe8447 5 жыл бұрын
If you know you know, AvE!
@ezriderzzr7104
@ezriderzzr7104 3 жыл бұрын
I have two Abloy 241 that i have had for about 20 years, they have been used on everything from my garage door, motorbike chain and now securing my Kayak 12mm security wire rope, first class locks.
@danielroglich3309
@danielroglich3309 4 жыл бұрын
Great job picking as always brother and thanks for sharing it with us
@thingouy45
@thingouy45 2 жыл бұрын
i have a abloy lock from the 1950s and it still works like it was new
@J4Hplays
@J4Hplays 5 жыл бұрын
Hello Abloy is actyally fun name, AB in the front comes from swedish word AktieBolag and L in the middle is Lukko (which means lock in english) and OY means (OsakeYhtiö) , so thats how you get name ABLOY. here is wiki link to what AB and OY means in details. en.wikipedia.org/wiki/Osakeyhti%C3%B6 -Best regads Some finnish person.
@skeepskeeperson
@skeepskeeperson 5 жыл бұрын
I bought one of these off eBay with no key and have been trying to make my own pick to open it up. Thanks for the video.
@spendle
@spendle 3 жыл бұрын
I work for a company that uses this brand locks. Glad to see they are very secure!
@bmedicky
@bmedicky 5 жыл бұрын
"Not sure what's holding us up" = another 15 seconds required.
@Sableagle
@Sableagle 5 жыл бұрын
{pauses video near end} {takes screenshot} {measures angles} {starts filing down metal stock} The master key shall be ours, oh yes.
@dlevi67
@dlevi67 5 жыл бұрын
Given there's a few hundreds of thousands of these around, good luck in finding one where the master key fits... :-)
@escutus
@escutus 5 жыл бұрын
Well, he's going to change them. Mix and match, so that wouldn't work. Lol
@Jaroneko
@Jaroneko 5 жыл бұрын
As long as you don't have either (or any, there can be more than two) of the original keyed keys, there's really no way to reliably extract the master key from just this sample. Also, even if you did, that'd only be the master key to the series this lock comes from. With ten discs, five of which have multiple gates at two each, you have 32 different keys that would work in _this_ lock. One or more of these may work in other locks, but with just this sample, we have no way of knowing which.
@howlingwolven
@howlingwolven 2 жыл бұрын
I took mine apart before watching this (with the key, though). It’s also laser marked ‘The Enforcer’ and similarly to yours also has a key number stamped in - and it’s got a few master discs as well. It’s good you rekeyed yours! Mine has 0 cut discs in slots 1 through 4, master discs in 5 through 8, only 10 is a control disc although I guess the spinner is too, and there isn’t a single false gate nor anti-pick disc in the lot.
@scottwilliams895
@scottwilliams895 5 жыл бұрын
It's nice to see occasional videos of locks that you *WOULD* use. 👍
@Mr6Sinner
@Mr6Sinner 5 жыл бұрын
Would be a cool video if you can show us the process of choosing new internals and how to make a matching key
@getyerspn
@getyerspn 5 жыл бұрын
Nice if lpl says it's tricky that means it's nigh on impossible for us ordinary plebs.... I'll look out for those Abloy locks.
@crowley357
@crowley357 5 жыл бұрын
What an artisan's work this tools. Tip my hat!
@willreed6231
@willreed6231 4 жыл бұрын
I’ve got quite a few of these locks laying around home as the company I work for uses them to lock up high voltage sub yards..I’m impressed he picked it but bolt cutters goes through them in about 5 seconds lol
@TheFlyingBusman
@TheFlyingBusman 5 жыл бұрын
Well, anything keeping you out for a good 3 mins gets my vote!
@SkinnyCow.
@SkinnyCow. 5 жыл бұрын
"And next up on the autopsy table today we have........"
@soranuareane
@soranuareane 5 жыл бұрын
Those discs look so happy.
@bud1014
@bud1014 5 жыл бұрын
My place of work has these locks also. It always funny watching the newbies trying to remove the keys while it is open. We have a little fun with at their expense.
@CAMintmier
@CAMintmier 5 жыл бұрын
Can you do a video showing us how a locksmith (or someone of equal competency) would go about re-keying a pin or disc lock?
@garyanvil2354
@garyanvil2354 4 жыл бұрын
Would like to see the reassembly process with new disks and 🔑
@24blade00724
@24blade00724 5 жыл бұрын
I'm not really into lock-picking, I don't have the patience for it. I really do enjoy watching your videos. You should have shown rebuilding the lock, that would have been really interesting
@JoguroPick
@JoguroPick 5 жыл бұрын
Cool my friend. Fantastic padlock and Great picking. Greetings from Colombia.
@btravenphotos
@btravenphotos 5 жыл бұрын
It just occurred to me: In the "Lockpicking Video" racket, a mild case of OCPD--a disorder characterized by an excessive concern with attention to detail and orderliness--is a feature not a bug. Another GREAT video, LPL, thanks.
@cRizy89
@cRizy89 5 жыл бұрын
I'd love a more in-depth explanation of how these locks work and how the master key would work.
@thespiritof76..
@thespiritof76.. 5 жыл бұрын
Buy one off eBay.... get a screwdriver open her up.. Learn it inside and out.
@AlbertLebel
@AlbertLebel 5 жыл бұрын
Fantastic picking. Looks like the same type of lock on out pop machine. It has that half moon.
@OpeoAslam
@OpeoAslam 5 жыл бұрын
This looks like the exact one I accidentally left in Dallas, TX. Was a pretty pricey padlock but being made out of boron steel, and not being familiar with padlocks, I thought this thing was indestructible!
@BL-yj2wp
@BL-yj2wp 5 жыл бұрын
For a moment there I thought you were going to pick a Protec on video. But thats coming, right? :)
@lockpickinglawyer
@lockpickinglawyer 5 жыл бұрын
Maybe someday. It’s not on my radar yet.
@HeikkiTimonen
@HeikkiTimonen 5 жыл бұрын
This was just "Classic" core. PL 341 is availabe ABLOY SENTO, ABLOY SENTRY, ABLOY PROTEC2, ABLOY PROTEC and ABLOY CLASSIC cores.
@marc-andreservant201
@marc-andreservant201 5 жыл бұрын
The Protec 2 is basically the same core as the original Protec, except for the ball bearing in the key that pushes a spring-loaded pawl into a non-circular track. It is not an anti-pick measure, but rather prevents cast or CNC'd keys from being made without the proper blank (if the key didn't have a ball bearing, the twisting force would pinch the false key and prevent further rotation). Also, it extends the patent on the blanks to make sure Chinese companies don't start selling fake Abloy blanks in the near future. Key control with Abloy locks is quite strict. Canada Post uses the Abloy Protec, but they probably have their own key profile just for the mailboxes, since my generic Abloy key will fit in almost all keyways (including at some banks, McDonald's and the SQDC cannabis stores that we have in Canada now that it's legal), but it won't even go past the first disc in Canada Post locks. They were probably scared of people replacing the core with an "any key" core with true gates at all positions, since mailboxes are left unattended, and then reverse-engineering the master keys in their garage.
@castorer99
@castorer99 5 жыл бұрын
They are all picked😅 the hardest part is tool makeing. But with the right tool they are all the same what comes to picking. Have not seen a Abloy novel picked yet, but trust me its coming :D
@roysammons2445
@roysammons2445 5 жыл бұрын
Yep! That lock works 😂
@cakenes
@cakenes 5 жыл бұрын
Have you tried the new or new'ish abloys ? Here in Finland 99.999% of the houses have abloy locks, if not 100%. Haven't even seen anyone without one on their front door but it's usually the newer variants.
@Jaroneko
@Jaroneko 5 жыл бұрын
There are some iLOQs, especially in apartment buildings. And then a nearly non-existant number of others.
@joey25cb7
@joey25cb7 3 жыл бұрын
I have one of these locks with keys and it seems very well made but as I'm watching u picked it lol I just found ur channel and subbed awesome job👍👍
@clayz1
@clayz1 5 жыл бұрын
Nice knurling job. Multi talented lawyer.
@panther_launchpad
@panther_launchpad 5 жыл бұрын
i think the seller knew that you didn’t need a key for the lock
@CaptainHookNumber1
@CaptainHookNumber1 5 жыл бұрын
Great video! Picking abloys is really gun and I enjoyed your tool and picking very much! Nice machining and very clean technique! Do you want to go for other abloys too? 😃👍
@F3udF1st
@F3udF1st 4 жыл бұрын
Just bought a PL 330, these are absolute tanks, very nice feel to them. Feel bad leaving them outside unattended =( Bra jobbat Finland!
@14bqdonk
@14bqdonk 3 жыл бұрын
I'm glad this type of locks have been sell in Borneo for quite a long time!
Making another pickproof lock (but better)
15:14
Works By Design
Рет қаралды 1,8 МЛН
[626] A Pick Proof Master Lock? ALMOST!
11:17
LockPickingLawyer
Рет қаралды 2,8 МЛН
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3,7 МЛН
Watermelon Cat?! 🙀 #cat #cute #kitten
00:56
Stocat
Рет қаралды 42 МЛН
Sigma Girl Past #funny #sigma #viral
00:20
CRAZY GREAPA
Рет қаралды 7 МЛН
Stupid Barry Find Mellstroy in Escape From Prison Challenge
00:29
Garri Creative
Рет қаралды 19 МЛН
[921] Abloy “Classic” Cam Lock Picked and Gutted
7:00
LockPickingLawyer
Рет қаралды 374 М.
(632) Exploiting Abloy's Design Defect
8:57
BosnianBill
Рет қаралды 468 М.
Testing Abloy 342
6:32
WeTestIt
Рет қаралды 238 М.
‘Abloy Classic’ Pick & Gut using my $3 Disc Pick.
9:08
Daz Evers
Рет қаралды 12 М.
[1416] Retro-Cool Abloy Padlock Picked (Model 3020C)
4:19
LockPickingLawyer
Рет қаралды 624 М.
[1453] VERY Clever “Loki” Puzzle Padlock Solved
20:24
LockPickingLawyer
Рет қаралды 3,6 МЛН
Learn Lock Picking: EVERYTHING you Need to Know!
19:18
Lock Noob
Рет қаралды 2,8 МЛН
[593] Gallium vs. Titalium - Abus Padlock Meets a Gruesome End
13:42
LockPickingLawyer
Рет қаралды 8 МЛН
[1295] Unbreakable, Unpickable, & Bulletproof? (TED Tooling’s Unusual Lock)
4:26
Let's Settle This! What Wrench & Socket Design Will Slip 1st?
13:55
Torque Test Channel
Рет қаралды 2,6 МЛН
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3,7 МЛН