Log Splitter Battery powered

Plans to my projects
madebythemetalist.etsy.com
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
My Sheet Metal Bender Video: / ortsrrpzwk
Actually, I just wanted to see if it worked. And whether the cordless drill is strong enough, it is :) The spindle is only an M12, I think that this size should be designed Bigger. And in general, everything should be interpreted a little more massive. But it's just a prototype of a smal battery powerd Log splitter
This time it was just a small project because I have a lot to do privately at the moment.
Hope you get inspiered for some simular projects.
Thanks watching
Kind Regards Dirk

[@aimLined]

i hate missing your uploads but on the upside, i get to watch a couple new vids in a row. cheers.

[@harmlesscreationsofthegree1248]

Nice! Glad to see a new vid from you, was starting to worry 😅

[@TheMetalist]

Thank you 😁 i was a bit busy the last couple of weeks 😅

[@AlbiesProductsOnline]

If you weld a piece of 50x50mm angle iron to the top of the blade it pops the pieces apart easier without having to run the blade half way down and back every time

[@TheMetalist]

Mmhhh that a good idea 😁 thanks you

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , a pequeña escala está bien , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 😜 🤪

[@EfficientEnergyTransformations]

Great device! An additive would be to have gear (or chain) to increase the torque and then the same principle can be applied to a bigger (still mobile though) splitter.

[@spacefanboy]

It would only take FOREVER

[@jimharvey2k]

I would buy this!

[@theballisticfarmer]

I would buy this.

[@peterkathmann3136]

...... ohne worte .TOP!

[@TheMetalist]

Danke 😁

[@jojo-fh5zc]

Jetzt bin ich zwiegespalten.. xD

[@TheMetalist]

😅👍

[@patrickbeer7865]

Looks great! Simple design keep the hand made tools coming man!

[@TheMetalist]

Will come 😁

[@drpipe]

Always good to see you.

[@TheMetalist]

Thank you 😁

[@createdesign]

Wieder einmal großartig +ASMR der Spitzenklasse 👏

[@TheMetalist]

Dankeschön 😂😂😂 jaaa muss da noch den passenden #einfügen

Herrliche cooles Teil coole Idee und deine Hand die die Säge immer an macht mega

[@TheMetalist]

Dankeschön 😁

[@Martin-vx9wh]

Einfach und effektiv! Top

[@TheMetalist]

Dankeschön 😁

[@staschweisstechnischeausbi4262]

Super geile Arbeit...

[@TheMetalist]

Dankeschön 😁

[@Tule54]

Good idea, I like it! Nice too se a new video from You 👍👍🖖

[@TheMetalist]

Thank you 😁

[@paulpaul7878]

Super Kanal und geile Ideen 👍

[@massimilianorossi4250]

geniale

[@thomaswehnhardt712]

Es kann so einfach sein. Sehr geil👍

[@TheMetalist]

Dankeschön 😁

[@rv-eb3wu]

same idea would make a great motor lift evener to balance two hooked points.

[@TheMetalist]

Awesome idea 😃

[@DerAngeloMerte]

you need some kind of quickrelease to pull it back to safe time and battery ;)

[@TheMetalist]

Yes that would be nice 😅

[@DerAngeloMerte]

@@TheMetalist i am thinking on some kind of springrelease for the driving nut to which you welded the Axehead.

[@TheMetalist]

@@DerAngeloMerte yes i think we have same thoughts 😅💪

[@JaMaLKhan-rg4fx]

Amazing

[@schulersusa]

👍 stunning 👏

[@TheMetalist]

Danke 😉

[@kneeslidergurke]

Schön umgesetzt. Aber eine Axt würde es auch tun, oder? Und das schneller?

[@TheMetalist]

Denk ich doch auch 😅 eigentlich wollte ich nur wissen ob der akkuschrauber stark genug ist 😁

[@FlorianBeck_762]

Geile Idee 🤩 🤩🤩

[@raybenash8347]

What a great design and execution. I had to watch this several times just because I liked the build. What welding set up were you using, especially liked that aspect of how you were able to quickly to the tacking and finish welds. I think that would be my only piece of gear missing for me to make one.

[@pascal.guerin999]

Great idea, not sure the battery will last long !

[@dannyedwards592]

Solar charger thingamabob

[@DoubleMonoLR]

Indeed, a mains drill would be better.

[@FixNewsPlease]

Clever. I could see this in the camp for when arriving on a cold winter night and realizing you're out of kindling. Also a great conversation piece for the wall by the stove. Of course, I would take credit for the design until it broke. 😂🥂🇨🇦

[@TheMetalist]

Awesome idea 💪 my thoughts 😅

[@nicho80]

А что, топор сломался? Или протерял?

[@MrAndrew990]

Hopefully you are aware that fb pages are stealing your content and not sharing credit. Make that logo bigger pls

[@MrEllhel]

Mal wieder geil gemacht. Auch die Kleinigkeiten wie die Messingscheibchen usw. zeigen Deinen Hang zur Perfektion. Ist das dieser Hartauftragzusatz den Du da verwendest. Glaub das probier ich auch mal.

[@TheMetalist]

Dankeschön 😁 Ja ist hart Auftrag. Musst 3 lagen schweißen, geht echt gut und ist ein riesen unterschied 😁

[@michelastegiano7442]

super, cette idée m'avait traversée l'esprit , alors c'est chouette de la voir réaliser. le tube carré cela existe en épaisseur 4 mm et permettrait d'avoir du plus costaud, par contre je n'ai pas compris l'utilité des 2 cornières perpendiculaires où va le couteau en position haute , idem pour ce qui a été fait pour augmenter ou diminuer la longueur de l'ensemble, il me semble que cela devrait le faire juste en prévoyant une longueur max des buches que l'on envisage de couper. Ceci dit j'ai bien compris que c'était un proto, mais il me semble qu'on pourrait le simplifier tout en le renforçant. Et cela ne retire rien à la validation qu'avec une visseuse cela le fait. Merci pour la démonstration.

[@mravx2993]

Nette Idee, ein Fußschalter wäre hilfreich, aber mit dem Richtungswechsel der Maschine wohl nicht ohne zerlegen zu machen.

[@TheMetalist]

Ja sowas wäre auch geil, denk dann würde ich aber einen andere Motor verbauen

[@anchorman47]

Des dauert genau noch 30 Scheitel dann frisst sich die verzinkte stahlmutter auf dem gewindestangal wenn kein Fett mehr droben ist. Solltst eher eine messing/rotgussmutter hernehmen dann hast auch länger was davon. Sonst super praktisches Teil!

[@TheMetalist]

Dankeschön 😁 Ja stimmt schon. Ich weiß jetzt auf jeden Fall das der akkuschrauber stark genug ist des war auch eigentlich der grund den zu bauen, also ein "Prototyp"

[@jbnrusnya_should_be_punished]

At first glance, it is a wonderful product that is made at home, but it works. But... at the end, it is already noticeable how the dust falling from the firewood falls on the thread of the rod. This will very soon lead to the jamming of the tool even on such thin wood, which is easily pierced with an ax without it. And the biggest problem is those logs that are thick enough to cut with an ax in 1 blow. It is from 15-20 cm and above. You should not even try to put them in such a device, it will simply resist and burn if you try to do it in drilling mode.

[@linkylink]

this open side of the bar should be the rear one, you got too much dust and wood pieces into your thread

[@mopedmarathon]

Have you seen the wood auger log splitting drill bit thing? It’s like a cone with a thread cut up it. I was thinking that would be great on an impact driver. Just act like your trying to drill a hole in the end grain until it splits.

[@TheMetalist]

Saw it, nice idea 😁👍

[@scottishprincess2]

What is the ruler you are using? Hubby wants to know. Thank you.

[@Airn5475]

Have to say I’m really disappointed that blade wasn’t a metal hand!

[@TheMetalist]

Omg i missed that 😂💪

[@Bosbulls]

I was also surprised.

[@nailswood167]

Yep, karate chop…

[@sangtaohay814]

hay quá pro

[@DaltoN-81]

Скажите, зачем острие сваркой прогнал?

[@Lorbuverse]

Da war ich mit der Rohrbohrmaschine auf dem Holzweg 😜 Wie immer nicht nur gut gedacht, sondern auch gut gemacht Wie viel härter wird die Schneide eigentlich durch das Aufschweissen von Material? Macht dabei der Zusatz die Härte oder die Temperatur des Materials? Ansonsten immer weiter so 👍

[@TheMetalist]

Dankeschön 😁 ist ein spezieller hart Auftrag zusatz Werkstoff. Man muss ca 3 lagen schweißen bis man die Härte bekommt (1.-2. lage mischgefüge). Man muss es nicht Härten. Ist dann richtig hart vergleichbar mit....schwer zusagen. Für den Holzspalter reicht es locker 😅😁

[@user-ss7zo5ig4i]

Нужен более крупный шаг резьбы, эту резьбу на более плотной древесине порвёт. Впрочем это и не дровокол.

[@-TheRollingChef-]

Richtig geiler scheiss 🤘wie immer 😉

[@TheMetalist]

Dankeschön 💪

[@vbenderschi.2777]

_Une semaine, coupez le bois de chauffage pendant la nuit .. ne prenez pas la tête, mais fendeuse de bûches est inutile._

[@echo8287]

Ah the guy from another planet> you aliens are very smart and ingenious!

[@echo8287]

My favorite is the tube notcher with the plasma cutter. Next I think you should tackle free energy!

[@TheMetalist]

🤣🤣🤣Thank you 😁

[@alanmony1582]

Mr. Metalist (the genius) I'm going to make a version of this for my next door neighbor who's gas powered splitter drives the wife nuts! Also, could you please tell us more about that Tig Torch? Is the finger control variable for the amps?

[@TheMetalist]

Oh yes 😂 Right side is for on/off and left is for up and down

[@alanmony1582]

@@TheMetalist That's Sweet! What brand is it? Can I get one in the former USA?

[@TheMetalist]

@@alanmony1582 is actully a ck worldwide torch and finger control from Translas. "A freak torch"

[@akimlettner2984]

Could this be adapted to cut branches and sticks for firewood processing. Just a thought.

[@TheMetalist]

Mmhh could work😁

[@giacomomarsilio8314]

😃😃👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼ti amo

[@Bezborodov_Nikolay]

Топором в разы быстрее и полезнее для здоровья. Это дровокол для ленивых и нЕмощьных.

[@paulp96275]

👍👨🏻‍🏭🇬🇧

[@wertyjsdfgvb]

And axe is 10 times faster.

[@TheMetalist]

👍it is

[@jothain]

That's just insanely slow

[@TheMetalist]

Yes it is not the fastes