A video demonstration of the LOGAN 301-1 Compact Classic mat cutter.
Пікірлер: 56
@toomanyjstoomanyrs17052 жыл бұрын
Bought this at a yard sale. Figured some day I might use it. Today is the day.
@sherrilltaylor18012 жыл бұрын
I just purchased the Logan Matt Cutter 301-1. After watching your video I can’t wait to use it. Thanks for your great instructions 😊
@davidfriedman3962 Жыл бұрын
I recently purchased one, fantastic product and outstanding customer service!
@ThePobolycwm3 жыл бұрын
Cool, just ordered a 301-1 and i have been dreading cutting my own
@LoganGraphic3 жыл бұрын
I hope you enjoy it, the tool will work well for you. Feel free to contact us with any questions and remember we have a free border calculator on our website that might be helpful. Thanks.
@hwmcgill35422 жыл бұрын
Thank you so much! That is a great video, love the close ups!
@LoganGraphic2 жыл бұрын
You are very welcome, thank you.
@RawFitChris3 жыл бұрын
and... Thanks especially for your convenient online mat border calculator!
@TURTLEORIGINAL3 жыл бұрын
Great tutorial video! Thank you, I'll be buying this one! Good day to you!
@LoganGraphic3 жыл бұрын
Hi there. You are very welcome. Enjoy your mat cutter and feel free to contact us with any questions.
@mjh54376 жыл бұрын
I have a very old mountcutter,about 40-50 years old, (with a wooden base board) which allows the user much more control of the precise length of the cut,because the blade is pulled towards the body rather than away from it,and thus the palm of the hand can then be lowered down against the slip mat to act as a brake.
@LoganGraphic6 жыл бұрын
Hi, We also make many model mat cutters that are pivot and pull style as opposed to how the Compact series works. If you have any questions on our mat cutters or want to send us a photo of what you have to possibly identify the mfg. please call us at 800-331-6232. Thanks.
@gabe22524 жыл бұрын
Just cut my first mat! It was really easy and fun.
@lupuscinus2 жыл бұрын
Was searching for the knife pass on Mount Logan, can't say I was dissapointed..
@ramiterreinnovations83592 жыл бұрын
Can this be used by left handed?
@deancommissioning2 жыл бұрын
Yes but have it set up the mirror image of how the guy in the video has, and drag it towards you rather than pushing, hold the guide rail down with your right hand (this is what it says in my manual anyway!)
@MrKengah3 жыл бұрын
You sold me. I just ordered one !
@LoganGraphic3 жыл бұрын
We hope you enjoy it and feel free to contact us with any questions.
@jopitt609 Жыл бұрын
Just ordered one ! What does the slip sheet do ? Does it come with the cutter ?
@davidhughes79643 жыл бұрын
I bought one of these. Very easy to use but I found when cutting a window that the sliding guide was not 100% parallel with the cut line, probably only out by 1-2 mm but very annoying as the window was not exactly square to the mount.
@LoganGraphic3 жыл бұрын
Hello, A mat guide that's not parallel would result in borders that taper from one end to the other. Can you measure the borders and see if the are the same thickness from top to bottom or are they tapering? The mat guide can be quickly re-paralleled if necessary as seen on page 5 of the instruction manual. Please contact us if you have any questions at cs@logangraphic.com
@davidhughes79643 жыл бұрын
@@LoganGraphic Yes, it does taper, thanks for the advice I will try it.
@LoganGraphic3 жыл бұрын
@@davidhughes7964 If you have any questions on the process, please contact us.
@angframervlogger34993 жыл бұрын
Thank yuo. On sharing.
@suzannerowlanddavis48794 жыл бұрын
Do you have pull cutter for the 301 com pact mat cutter. I have better control at pull than push.
@LoganGraphic4 жыл бұрын
Hello, The mat cutters that are above the Compact series all use pivot and pull style bevels cutters instead of push style like with the Compact series. You could however use a #702 pull style bevel cutter on a Compact mat cutter. This is a replacement part that could be ordered directly from Logan. Please call us for more details. 800-331-6232. Thanks.
@user-hd8bp3cm5g Жыл бұрын
I can't get the ruler to fit down into the groove so that I get a tight fit. What am I doing wrong?
@LoganGraphic Жыл бұрын
HI John Thank you for choosing Logan for your mat cutting needs. Please give us a call and we can trouble shoot for you. 847-526-5515
@harleyjune12334 жыл бұрын
bevel is inward....how do you use this to see the bevel after mounting? seems we need to have different marks on coor side and protection as we push cutter?
@LoganGraphic4 жыл бұрын
Hello, We always design our mat cutters to cut from the back of the mat board. This avoids having to make marks on the color side and having tools sliding over the color surface that might leave streaks or marks. First you measure and mark the border lines on the back of the mat board. Always use scrap mat board under the mat you are cutting when bevel cutting. Then using the mat guide, insert the board color side down and cut from line to line. The window then drops out from the front and the bevel cut is on the color side of the mat board. If you have more questions, please call us at 800-331-6232. Thanks.
@harleyjune12334 жыл бұрын
omg - duh moment - i have to cut to the outside....or push the cutter on the picture or cutout...got it...should have been obvious and now it is..
@LoganGraphic4 жыл бұрын
@@harleyjune1233 Glad to hear this. If you have any other questions, please let us know.
@TJFNixon3 жыл бұрын
Can this be used to score to snap Styrene sheets? Thanks.
@LoganGraphic3 жыл бұрын
Hello. The bevel and straight cutter both use razor blades which I believe could score Styrene. But the tool is not specifically made for this purpose so I am not sure how practical it would be. You could have a look at our 709-1 Acrylic Plastic Cutter which is a scoring tool used to scribe plexi acrylic and then snap it. That can be used along a suitable straight edge or any of our board mounted mat cutters.
@TJFNixon3 жыл бұрын
@@LoganGraphic OK thanks
@ellengeyer50002 жыл бұрын
How thick does the slip sheet need to be?
@LoganGraphic2 жыл бұрын
Hello. The slip sheet is just scrap mat board. Like a piece of standard 4 ply buffered acid free mat board. You must use a slip sheet when bevel cutting but remove it when straight cutting. Only use mat board as a slip sheet and nothing else. Save your scraps and window drop outs as they can sometimes be used as a slip sheet. Eventually the slip sheet becomes worn and you will need to move it around, flip it over, turn it the other way etc. until you need to replace it. Thanks.
@millybops1133 жыл бұрын
Hi, could you use a self healing mat as a slip sheet instead of some scrap mat board please? Thanks🙏
@LoganGraphic3 жыл бұрын
No that is not recommended. A self healing cutting mat is a dense rubber and will dull the blade and even break the tip. Best to use scrap mat board as a slip sheet and move it around, flip it over and eventually change it. Thanks.
@TJFNixon3 жыл бұрын
I see its 810mm. What's the longest opening you can cut?
@LoganGraphic3 жыл бұрын
Hello. The full capacity or largest size mat board you can get between the hinges on the Compact series is 32" or 810mm. The opening has to be somewhat smaller than that to account for the border widths at either end. The smallest border you can set the mat guide to is roughly 3/4" or 11.5 mm. Which would create an opening of roughly 30 1/2" or 774.7 mm. We also have mat cutters that accept up to 40", 48" and 60" sizes if you need something larger. Thanks.
@TJFNixon3 жыл бұрын
@@LoganGraphic OK thanks.
@eddymoney42716 жыл бұрын
Does this product work for cutting foam board? Thank you.
@LoganGraphic6 жыл бұрын
Yes, the #500 mat knife that comes with it will straight cut up to 3/16" (5 mm) foam board.
@RubinGnoni4 жыл бұрын
How long does a slip sheet last?
@LoganGraphic4 жыл бұрын
It depends on how often you cut mats and how long the cuts are. The blade depth should be set to only score into the surface of the slip sheet. After the slip sheet becomes worn over the area you are cutting, turn it the other way around or flip it over until its completely used up. Then replace with more scrap mat board.
@sandradelzell18909 жыл бұрын
My Logan 301 is many years old. There is slippage of both pieces of matt when I attempt to cut. Is there a remedy or should I replace it? Thank you Sandra Delzell
@hankwhitley2227 жыл бұрын
Sandra Delzell use a slip mat...I think a scrap piece of mat is all you need...shows this in this video.
@LoganGraphic7 жыл бұрын
Hello Sandra, You must use a slip sheet under the mat you are cutting made from standard scrap mat board. You must gradually move it around as it gets used up or flip it over until it needs to be replaced. You can use masking tape to help hold the slip sheet in place. Also make sure you are applying pressure to the guide rail while cutting to prevent the slip sheet and mat from sliding. Make sure you are standing at the end of the mat cutter to push the bevel cutter away from you.
@sandradelzell18907 жыл бұрын
I have always had a slip sheet underneath. I have successfully cut matts for a long time then it stopped working. I do all the other motions you mentioned. It is no longer stable.
@LoganGraphic7 жыл бұрын
With this machine, you need to stand so you are pushing the bevel cutter away from you with your right hand and putting pressure down on the guide rail with your left hand. Make sure your blade depth is set jsut to score the surface of the slip sheet.
@garyortolano73746 жыл бұрын
Then...buy a new one.Problem solved.
@davep31713 жыл бұрын
where can i buy one of these?
@LoganGraphic3 жыл бұрын
Hi, please use the "where to buy" dealer search on our website www.logangraphic.com. Or call us for help finding a dealer 847-526-5515. Thanks.