Mate, I just fixed my best friend's boiler. She's disabled and she was sitting in the freezing cold. Because of your video here, I was able to get her nice and warm again before British Gas came out tomorrow. Thank you very much 👍🎉🍸
@69racer69 Жыл бұрын
Amazing, I’m so glad to of helped, thank you for posting a message. At least she has a warm house now.
@chrisking98813 жыл бұрын
That plastic container was full of limescale I presume, I just did the same thing, cleaned up the container, the rubber pipe and unblocked the downpipe and it was resolved. Thank you, I was going spare trying to work out what wrong and it was exactly this. Had a heart stopping moment when the boiler came up with the same error but switched it off for a minute, restarted it and now it's happy again. Many thanks!
@69racer693 жыл бұрын
It’s soot from burning the gas, good to clean it out every year, you should never get a problem then. Still worth whole having a service now and again so they can clean the spot out of the heat exchanger unit and keep it running efficiently. Glad you’re up and running again 😁👍🏻
@danseymour94142 жыл бұрын
Before I begin, I'd recommend everyone to turn off the boiler before beginning!!! Absolute legend!!! My family and I have just moved house (6weeks ago), boiler packed up last night leaving my 6yo son pretty happy because he was due his 6monthly shower. Today, I came across your video after phoning/emailing copious amounts of gas engineers/boiler people... Decided I'd give it a go. I did exactly as you showed in the video however, the little black pipe was completely blocked and the black bit above said pipe was also blocked. I stupidly took the cover off before having a bowl ready which resulted in somewhat flooding the circuit board... Fortunately I turned my boiler off before starting so I took the circuit board out, dried everything throughly and carefully dabbing it as well as the screen. Once fully dried I put the circuit board back in place and continued the unblocking process just using my fingers and big bits of tissue (making sure no tissue gets stuck in there too of course). 1½ hours later and my boiler is working perfectly! Thank you so much man, you are a saviour... I will 100% subscribe. Take care man and thanks for a third time!!
@69racer692 жыл бұрын
Thank you buddy, the other steps you went through are exactly the steps I have had to do on some people on my estates boilers. One also had a blocked outward pipe. So it’s worth giving that a blow through with a bit of hose pipe pushed against the exit pipe, make sure it’s clear so it won’t back up again. So glad you managed to get it working before any real cold weather starts. It was freezing cold when it happens to me. Thanks for the long reply detailing what you had to do. Top man 😁👍🏻
@TheGoofFairy2 жыл бұрын
My boiler was making a loud groaning noise when the hot water was being run, this fixed it can’t believe it but it worked. Thank you so much Logic Combi 30 👍🏻
@69racer692 жыл бұрын
I’m so glad it helped you out with winter approaching.
@amitvishwa214 жыл бұрын
You are a savior mate.. your fault fixing just really worked, I was a bit hesitant to do it myself however since Boiler was showing L2 consistently with huge rattling noise while restarting up, so thought to do myself, I will get it checked with the safety engineer though ...
@69racer694 жыл бұрын
Hi Amit, that is great news, I’m so glad you have heat now in this cold weather. If you only disturbed what I showed in the video, it will be perfectly safe. So don’t pay any call out charges and boot in a routine service.
@amitvishwa214 жыл бұрын
@@69racer69 thanks for your quick response, yup have touched any note than what you showed, so probably will save some money on here 🙏
@69racer694 жыл бұрын
@@amitvishwa21 I don’t blame you, I hope it permanently fixed your problem. It is worth checking this before each winter.
@MrSwifte3 жыл бұрын
Great video.... I checked everything and I gave up.... then I found this one and this was the problem... water everywhere, but it's working now. thanks a lot...
@69racer693 жыл бұрын
Glad it worked, keep an eye on the exit pipe as well, make sure that doesn’t block.
@lordlippy8517 Жыл бұрын
Thanks very much. My partner’s boiler was displaying L2, I had no idea what to do but your video helped me and now she has hot water again 😁
@69racer69 Жыл бұрын
Awesome 👍🏻 I’m really glad the video has helped.
@lunalu2604 жыл бұрын
I watched a few videos just your shows how to solve L2 fault. Thank you because I am a woman without job and I was sitting alone in a cold flat. Thank you
@69racer694 жыл бұрын
You’re very welcome. If the problem comes back let me know, because there are a couple of other things you can do to fully fix it if this didn’t fix it. Again very simple and you can do yourself and save your money. Well done for doing it 😁👍🏻
@Chuckycarp3 жыл бұрын
Thanks for taking the time to make this video. Fixed my boiler with your help
@69racer693 жыл бұрын
You’re welcome, I’m glad it helped you.
@CorporalFriendlyShark10 күн бұрын
Had to leave a comment to say you are doing God’s work with this video mate, super easy to follow and completely fixed my issues, absolute legend ❤
@69racer6910 күн бұрын
@@CorporalFriendlyShark thank you for the comment buddy. All about saving some money for these tittle things that can keep people’s homes and families warm in winter 😁👍🏻
@lindseypearson97684 күн бұрын
I’ve got the same boiler which is 6 yrs old. It came up with F9 fault and just had a new sump fit. I’ve got hot water and heating now but it’s dripping slightly and the switch where a red light is always on isn’t anymore. Any ideas please ?
@lindseypearson97684 күн бұрын
I’ve got the same boiler which is 6 yrs old. It came up with F9 fault and just had a new sump fit. I’ve got hot water and heating now but it’s dripping slightly and the switch where a red light is always on isn’t anymore. Any ideas please ?
@69racer694 күн бұрын
@ sorry, I haven’t had that issue so I don’t know. Have you googled what the F9 fault is?
@Lacells10 ай бұрын
Oh yes mate. Complete novice here, no hot water since yesterday, heating not worked all day. Stuck on L2 and no flame icon, Followed this. Once I washed that out shuck it about: re installed. Boiler worked good as new. Feel a sense of accomplishment but that’s all down to you and your vid. Thanks once again 🙂👍🏽
@69racer6910 ай бұрын
I’m glad you have hearing and hot water again, basic needs that is horrible when we don’t have them.
@larvalampblue2 жыл бұрын
I can't thank you enough for this informative video that fixed my problem and saved me hundreds of pounds especially with todays rising heating bills and as a woman in her 60's I found it easy to follow and got that feel good feeling when you accomplish something like this on your own especially when it saves you money. All the best young man. Keep up the good work.
@69racer692 жыл бұрын
I’m so glad it’s helped you and saved you money. Thank you for taking the time to reply. If the problem comes back, be sure to message again as there is another simple things to do that is connected to this. Chances are this has fixed it for you.
@larvalampblue2 жыл бұрын
@@69racer69 Thank you very much. I will be sure to stay in touch if I need any more help or advice. This was a new boiler 3 years ago and has already had a new gas valve fitted 15 months ago. It has been nothing but trouble but so glad I found your video. Wishing you a good week ahead of you.
@krecik1980r3 жыл бұрын
My water wasn't that bad but still block my pipe and now is working perfectly thank you so much
@XxNICKY7589xX2 жыл бұрын
Top man. Thank you so much. Fixed my issue instantly. Wishing you all the best.
@WestermanT.4 жыл бұрын
Just tried it on my boiler and it’s back working again. Thanks for uploading this
@69racer694 жыл бұрын
That’s great to hear, especially in this weather on NYE. So glad it has helped someone. 😁
@muralioruganti67694 жыл бұрын
My engineer used same method..but it's working only 30 min and again same issue
@69racer694 жыл бұрын
@@muralioruganti6769 is it full up again? Maybe the pipe going outside is blocked? If it’s still clear then check the extraction fan at the top is running, if that’s working it could be the gas valve sticking. Just some ideas to try.
@stevieg89492 жыл бұрын
Top Man...Followed your instructions to the tee and it worked a treat.
@ssblade563 жыл бұрын
Thank you! Boiler stopped firing up with an l2 error code. Thankfully found your post, followed your vid and everything is working again :-) As soon as a opened it up, you could see the water was clogged. Appreciate the upload!
@69racer693 жыл бұрын
You’re very welcome. I think it’s definitely that time of year people will start needing this again. I’m glad it helped you out 😁👍🏻
@davidlomas69212 жыл бұрын
Thank you for a great easy to follow video, this worked a treat when i had a L2 fault. Very much appreciated, well done sir
@BL4YNY3 жыл бұрын
Thank you so much for this video! I had the same issue with no idea what to do This video was perfect ! Thank you
@69racer693 жыл бұрын
You’re very welcome. Glad it helped you over the Xmas season when it’s harder or more expensive to get an engineer out.
@tyronsoutter743 жыл бұрын
Thank you, sorted my boiler in 15min. Thank you for posting the video
@69racer693 жыл бұрын
You’re very welcome
@mohammadshabbirhossain57293 жыл бұрын
Thank you so much for sharing your work with us... really appreciate your help really hope wish there should be more people like you and less people who try to rob people for simple jobs just to make few extra pound. God bless you dude.
@69racer693 жыл бұрын
Thank you Mohammad, that’s exactly why I shared it. I’ve had a few nasty messages from angry plumbers, but like you said, they shouldn’t rob people for simple jobs like this.
@mohammadshabbirhossain57293 жыл бұрын
@@69racer69 Bro, me and all the people who have put like in your videos are in your support. Please carry on making more videos and keep on rocking. You are a superstar never forget that... My boiler died on me on Wednesday after watching your video I fixed it my self... you have no idea how much I appreciate your work. Screw those people who make bad comments on your video.
@69racer693 жыл бұрын
@@mohammadshabbirhossain5729 thank you buddy, I really appreciate the kind words. If if happens again let me know, there is another thing just as easy to do.
@KrypteckLair2 жыл бұрын
Life Saver. Was ready to call an emergency repairman. Fingers so cold it hurt
@mubbsharali30292 жыл бұрын
Really Really appreciate that, it's really worked out perfectly ,anyone can do that,thanks for the video.
@bentusi772 жыл бұрын
I could fix the same problem thanks to your guidance. Much appreciated!
@georgechiper4448 Жыл бұрын
U really help me mate with your video. An huge thank you!!😅😅 now my family feel warmed. 😁 and saved me some money btw…. THANKS AGAIN!
@69racer69 Жыл бұрын
You’re very welcome. I’m glad your family are nice and warm. Use the saved money on a nice take away and have a family movie night 😊👍🏻
@brksivas3 жыл бұрын
Bu kombi neden her ateşlemeyi kestiğinde fan son hızda çalışıp çok ses yapıyor.
@TomW-o7dАй бұрын
Spot on ! Worked exactly as shown for me thanks
@69racer69Ай бұрын
@@TomW-o7d glad it helped you out
@MinsiLu-e3b Жыл бұрын
Thank you so much for your video, you save our lives.
@69racer69 Жыл бұрын
You’re very welcome 👍🏻
@sseventones2 жыл бұрын
Thank you very much Greatly Appreciated -3 today and I’m working from home The heat is back on 👍
@69racer692 жыл бұрын
-11 here this morning, I’m glad my video got you sorted out. Enjoy the warmth.
@krecik1980r3 жыл бұрын
Thank you so much it save my family from freezing thank you again so much ❣️
@69racer693 жыл бұрын
I’m so happy to know it has helped keep you and your family warm. Thank you for commenting 😊
@KeebleFeeble2 жыл бұрын
Thank you Racer 69. You are a life saver!
@69racer692 жыл бұрын
You’re welcome 😁👍🏻
@stephenhoyle91452 жыл бұрын
You’re a superstar thank you. Worked exactly as you said. 👏🏻👏🏻👏🏻👏🏻👏🏻
@69racer692 жыл бұрын
Glad it sorted you out.
@KrimoKrimo-tk9fn Жыл бұрын
You have just saved my life man :-) topppp mannnnn bless you
@Lach_Udrak9 ай бұрын
After cleaning the container, do I need to fill it with water and install it or install it empty?
@69racer699 ай бұрын
Not really, it will fill up by itself
@rockchickbiker6322 Жыл бұрын
great video! Thank you !you just saved me a plumbers bill :)
@69racer69 Жыл бұрын
You’re very welcome 😊 great to save money in January 🤘🏻
@786totae3 жыл бұрын
Thankyou very much for this video my boiler started to work again 👍
@69racer693 жыл бұрын
That’s awesome to hear, I’m glad I was able to help.
@dss199 Жыл бұрын
Awesome video, I thought I had a blocked drain causing my F2, took tank out and it wasn’t draining. Quick shake and clean and now draining thanks Do you know if there is a way to get all the crud out of the bottle or is it a job or buying new?
@69racer69 Жыл бұрын
Just keep filling it up and emptying it, it will pretty much clear out, but if it doesn’t then just buy a new one. I’m glad you’re all sorted now though. It’s worth checking it each year.
@DATR013 жыл бұрын
For Info : I had an F2 error, called an engineer and we found the pump was stuck, a couple of turns with a screw driver freed it. The F2 error can be reported if water isn't flowing inside the boiler, a sensor sends a high temperature fault to the pcb which then shuts down the boiler with a F2 code. Basically, when water flows it keeps the sensor cool and no fault is reported. If water doesn't flow the sensor gets hot and shuts down the boiler. So, check the pump is free before buying new parts. The boiler hadn't been used for quite a while, this is probably why the pump stuck.
@69racer693 жыл бұрын
Great advice, and great to add other faults that F2 can be caused by, thanks for sharing 😁👍🏻
@peacejungle2 ай бұрын
After cleaning the thing, do I need to leave some water inside? Sorry I can’t see it well in the video thanks!
@69racer692 ай бұрын
@@peacejungle yes, leave the water inside.
@69racer692 ай бұрын
Worth taking the little black cover off that is held on with 2 screws just above the pipe that feeds the tank you just cleaned. Just to make sure the pipe and entrance to it is all clear and clean.
@peacejungle2 ай бұрын
Many thanks!
@peacejungle2 ай бұрын
Thank you so much for sharing! Got it fixed now!! 😊
@69racer692 ай бұрын
@@peacejungle nice one, glad to of helped, saved some money there. Clean it out before each winter if you remember 😁👍🏻
@ashwinbobba54962 жыл бұрын
Hey Racer thank you very much for your video. That did the job for me. But it has too much water when opened on base. Fault is gone away and no more noises but radiators/heating dont work
@69racer692 жыл бұрын
Try the pipes entering and exiting the water chamber and make sure they are clear. Blow down them with a bit of pipe. Did any water get into the control panel? Make sure that is dry. If it was wet, you may need to replace the circuit board if it doesn’t start working.
@GladeElectrical3 жыл бұрын
Just cleaned it, thanks for uploading the video 👍
@ritanmartinez86302 жыл бұрын
Thank you for this. Do you know where I can get a replacement plastic container? Mine looks a bit cloudy even though I washed out all the sediment, and the blockage is gone . Seems to have limescale on its inner walls
@69racer692 жыл бұрын
Sorry, I’ve never bought the one, try googling it.
@otlui909118 күн бұрын
Hi mate, I got the same problem. I try to clean the condensate trap as you show in the video and put it back. It works perfectly but after few hours running, the F2 error happen again. I cleaned the condensate trap so I think it works normally. Do you know is that any other reason make the F2 happen again?
@69racer6917 күн бұрын
@@otlui9091 check to see if the pipe the tank sits on isn’t blocked. Do this by getting short length of hose pipe, pressing up against the rubber and blowing as hard and fast down the pipe. If there is resistance, it’s blocked or frozen on the outlet. Check outside and see if the outlet pipe has ice in it. If so you can poor hot water onto the pipe outside to thaw it out. If the pipe doesn’t go outside and goes into a drain, then keep blowing into the hose pipe until you can blow out the blockage. If it is clear completely when you check, try the pipe that is coming into the top of the tank, follow it up to the plastic part it’s attached to, you will find a small front cover held on with 2 screws, take the cover off and check if there is water in there, and check the pipe is unblocked completely. Put a towel under to catch any water, you don’t want it going into the back of your control panel and damaging your PCB’s Good luck, one of these should sort you out, if it doesn’t, it maybe the gas system and you’ll need a plumber for that.
@otlui909116 күн бұрын
@69racer69 Thank you for your reply. I try to blow the condensate pipe connected to sink and I found that it is blocked. Now I am trying to pour hot water and blow hard, hope it works. Thanks for helping me to find out the problems
@69racer6916 күн бұрын
@ you only need hot water if the pip is going outside. If the pipe goes to the sink, just blow really hard, it’s probably clogged up with fat or suds from the washing up. If it goes outside then use hot water on the pipe outside.
@thomasozeu89762 жыл бұрын
Well it worked for 5 min then I put cover back switch on switch off and same thing happened again. Is there anything else I can clean?
@69racer692 жыл бұрын
Yes there is more you can do. Take the 2 screws out to take the black cover off just above the little tank you just emptied, make sure that isn’t blocked. Also get a short bit of hose pipe and press it against the pipe leading out of the wall, and blow through it to make sure it’s not blocked.
@thomasozeu89762 жыл бұрын
@@69racer69 lovely thank you for prompt response I will update you how it would go
@thomasozeu89762 жыл бұрын
@@69racer69 it works!! Thank you thank you so much
@69racer692 жыл бұрын
@@thomasozeu8976 perfect!! What part was blocked for you?
@thomasozeu89762 жыл бұрын
@@69racer69 the one above the small tank had so much limestone in it I cleaned both one more time and yes it works for now thank you again
@nicolassilva5704 Жыл бұрын
Thank you this was exactly my problem
@69racer69 Жыл бұрын
You’re welcome, I’m glad it helped
@KM-gs2he Жыл бұрын
Was able to have a rewarding hot shower after following this video! Thank you!!!!
@69racer69 Жыл бұрын
You’re welcome 😊👍🏻
@KM-gs2he Жыл бұрын
Just one thing I didn’t fill the condensate trap when reattaching? I hope that’s ok
@69racer69 Жыл бұрын
@@KM-gs2he it’s fine
@zaperfan3 жыл бұрын
When you put the plastic container back, is it empty might sound a silly question, but I thought I could see water in it?
@69racer693 жыл бұрын
There should be water in it. It is designed to have water in it but it should expel water when it get to a maximum level and empty it down to a min level.
@zaperfan3 жыл бұрын
@@69racer69 Thanks for the reply, what I meant was did you fill it back up after cleaning it sorry for the confusion
@69racer693 жыл бұрын
@@zaperfan oh, I didn’t fill it back up no, it fills up by its self. Need to make sure there is some in there to act as a seal to the outside world.
@mmc16703 жыл бұрын
If your boiler goes wrong, ingnore this video and call a gas Safe registered engineer. Repairs on boilers can go fatally wrong if you don't understand what you're doing. It's not a DIY situation
@69racer693 жыл бұрын
The gas is not being touched, nothing dangerous about it at all. there are people out there that are struggling with money that can benefit from this video.
@l-double-uartist27303 жыл бұрын
😭😭😭😭
@thomaswatt16583 жыл бұрын
The appliance is a gas appliance and though technically you are correct that you are not interfering with the gas you are working on a gas appliance.this is what annoys me,we have to go and pass an exam,at our cost,to work as gas safe engineers and people like you encourage people to do these types of repairs.a little knowledge can be a dangerous thing.btw hope all that crap didn't settle in your sink trap
@qhero4503 Жыл бұрын
@@thomaswatt1658 Well said mate some people just don't get it, he said its nothing to do with gas but its a gas appliance you just taken the cover off and haven a diy work on it lol
@qhero4503 Жыл бұрын
Good advice mate
@mattvannoordt34122 жыл бұрын
Thanks man! This did the trick :)
@qaisniazi37933 жыл бұрын
Thanks a world for your helpful video. 👍
@69racer693 жыл бұрын
You’re very welcome 😊
@rory_scott4 жыл бұрын
I've been having L2 errors for weeks now and constantly been having to 'Restart', or worse, waiting hours for it to rectify itself. I had a gas engineer come out for 10 minutes and he apparently cleaned the electrodes, but the fault wasn't occuring at the time when he arrived. They wanted £72 for 5 minutes work. Anyway it didn't even fix it, and I've still been getting L2 errors everyday. I tried cleaning out this plastic water container and replaced it and it fired up first time!! (after the boiler has been refusing to work all day). The water didn't look that dirty and I couldn't see any blockages so I have no idea if cleaning it fixed it, or if it was a coincidence that it fired up in that moment. Cheers anyway, we have hot water for tonight. If you have any more tips for L2 errors just in case it breaks again then please share :) One thing I have taken notice of is that the boiler has been failing to ignite with L2 errors more often on the coldest days which might suggest a particular issue? cheers.
@69racer694 жыл бұрын
Hi Rory, try taking the water container out again and get a bit of hose pipe and push it into where the container exits, blow hard into the hose to check the pipe isn’t blocked. And also check the exit of the black plastic part of the boiler that goes into the top of the water container, make sure that isn’t blocked either. I cleared out a neighbours boiler earlier today and that’s what I had to do to theirs. It started up first time and they were finally able to shower and heat the house. Give it a check to make sure. Hope it helps. No need for another £72 for nothing, it’s such a common problem I don’t know how they missed it???
@rory_scott4 жыл бұрын
@@69racer69 Cheers. It wasn't until I assembled it all back together when I realised I should have at least stuck my finger in that black rubber pipe above the water container just to make sure it wasn't blocked. Will keep that in mind! I don't mind paying money for someone to rectify an issue, but they were suggest a trial and error method.. easy to suggest that at £72 ish a call out! I also don't understand how he wouldn't have cleaned this container since its a 5 minute job. Hopefully it stays cold over this next few days so that I can confirm that the boiler is sorted and doesn't throw any more L2 errors.
@69racer694 жыл бұрын
@@rory_scott definitely check those bits, and the pipe going outside, blow down it 😁👍🏻 save yourself some money, and keep warm
@rory_scott4 жыл бұрын
@@69racer69 hi mate. Having the same problem again with this boiler. It was working fine for a couple weeks again but Since this cold snap it’s shutting down with L2 almost all day everyday. I’ve come to the conclusion it’s 100% related to the outside temperature dropping v low.. any ideas? It’s a combi boiler so it’s igniting all day everyday under usual circumstances, so I don’t believe it’s anything to do with the boiler ‘working harder because it’s colder weather’. I have removed that plastic container and emptied the water a few times which did seem to work a few weeks ago but may have been a coincidence.. or maybe slightly related. My question is, what components of the ignition system could be affected by the cold weather? Cold weather confusing a Sensor? Flu sensor? What about frozen external pipe work? This boiler is a nightmare.
@69racer694 жыл бұрын
@@rory_scott hi Rory, remove the container again, check that the black plastic above it is clear and not blocked. And then put some hose pipe into where the container drains into and blow down the pipe to see if it’s blocked. Keep blowing hard to see if it clears. That should solve it. Sometime the outside temp can also freeze the pipe on the outside so the water doesn’t drain out. So just ensure all this is clear and your problem will be gone. Let me know how you get on.
@beatateresalaskowska4679 Жыл бұрын
Thank you very much. Maybewe salve lot of money.....tanks ....
@Chuckycarp2 жыл бұрын
Year on after the first fix and the dreaded gurgling again!
@69racer692 жыл бұрын
This time when you empty it, check the exit pipe to make sure that’s not blocked. You can use a small length of hose pipe, press it against the end and blow through it. Also check where the water enters the chamber through the black plastic, unscrew the 2 screws and make sure there is no blockage there either.
@jkwan892 жыл бұрын
Hey nice one for this! Just saved me a call out fee. Easy fix for clown like me!
@bulentpolat984 жыл бұрын
Thanks mate ur solve my problem
@VasileMunteanu-i3v3 жыл бұрын
I cleaned condensation tank , restarted boiler show me again l2
@69racer693 жыл бұрын
Is the entry into the tank “black part above” is that blocked? Or is the exit pipe under the tank blocked? If all that is clear, then call an engineer is it could be the PCB
@mylescpr1 Жыл бұрын
Thanks pal
@69racer69 Жыл бұрын
You’re welcome glad it helped
@tomi96vista3 жыл бұрын
Thank you so much
@69racer693 жыл бұрын
You’re welcome
@a1.m9252 жыл бұрын
Thank you mate 👍
@69racer692 жыл бұрын
Awesome, glad it’s helped you out
@logicmadness17523 жыл бұрын
I worked, I own you a 🍺🍻. Thank you
@69racer693 жыл бұрын
You’re welcome 😁👍🏻
@logicmadness17523 жыл бұрын
@@69racer69 next step is to change expansion vessel. Apparently the membrane has broke
@69racer693 жыл бұрын
@@logicmadness1752 there is no membrane in there. Just needs cleaning out
@davidputineanu6640 Жыл бұрын
Big like
@olinewton79532 жыл бұрын
Genius thanks
@manciclon2 жыл бұрын
Share, like ,subs 🤘🎩. Thank you sir 👍! Now it working mine too .
@MrSwifte3 жыл бұрын
PS... I prefer a 68.....
@69racer693 жыл бұрын
Don’t be so selfish lol
@rayc15034 жыл бұрын
Wow you're willing to change the fan and gas valve without doing 26.9 checks. On refit the condensate traps supposed to be filled with water. If the front case is fitted incorrectly. The boiler is no longer room sealed. This could cause natural gas or carbon monoxide to spill into the room. You really shouldn't encourage DIY gas on ideal logics. Sumps fail, injectors block as well as rusting cases. The list goes on........ these are things a trained gas safe registered person looks out for.
@69racer694 жыл бұрын
I said I had the parts, I only showed the blocked condensate trap and how to clean it out. I never encouraged anyone to do anything that would disturb the gas
@mmc16703 жыл бұрын
Very irresponsible video
@hutchy-vf7ph3 жыл бұрын
I just wanted to pass on my thanks. I boiler did this and because you uploaded this I had it fixed in no time. Thanks a lot
@JayGasEssex Жыл бұрын
irresponsible vid.... 26.9 checks? condensate trap is part of the flue system, gas valve??? WTF?!!! gas valves more often that not need to be setup and adjusted, then test the co/co2 levels and make sure they are correct and SAFE! Hope your ok but there's a reason why you must be gas safe to do this type of work, also illegal to work on combustion side (ie gas valve, fan etc...) not worth the risk just to save money....
@69racer69 Жыл бұрын
Awwwwww did you not know how to fix this fault and search on google or KZbin for a video??? Guess you’re charging your clients for watching videos