Logitech G29 Wheel Wobble Repair Guide

[@Tarny1234]

Cheers! My sons wheel had a wobble. Resolved now thanks to your clear and steady video. Our issue was with the 3 long silver screws through the middle of the spindle. Slightly different to yours, but you helped troubleshoot. Thanks again. Happy driving!

[@PaulinhoThompson]

Sounds awesome, glad you got it sorted 👍

[@robbiesousa7251]

Think this was my problem too, shoulda felt for wobble before pulling cover off, but great video made me feel comfortable pulling it apart.

[@JacksonTheDabber]

Had the same issue. thanks to this video I fixed it and thanks to this comment I saved a lot of time thanks ❤️

[@armageddon569]

Thanks so much man, fixed my wobble without having to take it apart and figure it out for myself. Like someone said in the comments, Dirt rally is killing this wheel...

[@PaulinhoThompson]

Well done, glad it helped.

[@Iron266]

How did you do it then?

[@armageddon569]

@@Iron266 I meant that I didn't have to figure out how to open the wheel by myself, instead I just followed this guide and easily figured out where did the screws come loose...

[@antj29]

Would some thread lock help to ensure it doesn’t repeat, mines done it and only a month old,

[@PaulinhoThompson]

@@antj29 yeah that's a great idea 👍

[@graememurdoch1468]

Thanks for this! Got everything apart and it turned out not to be the issue, but reassembling it got rid of the wobble so winning after all! Gave me the confidence to win my first 3 races back too!!!

[@PaulinhoThompson]

That's awesome news, well done on the race results.

[@markosolic8191]

Tighten 3 screws that holds gear pads .... The same that he removed before opening cover... I solved my wobble there !

[@aussiegrif8729]

Thank you so much for this video. Didnt have any wobble but needed to remove the clamps to replace them with extra long 3D printed ones to fit onto my extra-thick desk. This video was by far the most useful for the teardown, so it's appreciated!

[@PaulinhoThompson]

Thanks so much for watching 👍🏻, I'm glad it helped you.

[@traskhensley9377]

Thank you a million!!!! Everyone in my Facebook group kept saying it was done for you saved me tons!!

[@PaulinhoThompson]

That's good to hear, well done 👍

[@Bramon83]

Could you be better at grammar though? Jeez

[@Flashzinh0]

@@PaulinhoThompson Dude COME ON !!!!! I've returned THREE WHEELS to the store and every time it came with the same wobble. Jesus fucking Christ I can't thank you enough. I thought I would have to live with this shit forever. THANK YOUUUUUUUUUUUUUUUUUUUUUU

[@PaulinhoThompson]

@@Flashzinh0 Glad it's helped, and it does seem to be a very common problem.

[@SkaterJay789]

thanks bro this helped. Anyone who is doing this please be aware that those 4 black screws on the bottom. DO NOT REMOVE THEM. It will cause the wheel to jiggle and the black plastic piece that keeps the wheel from spinning endlessly could move. I found out the hard way. Thanks

[@PaulinhoThompson]

Glad it helped, thanks for watching 👍🏻

[@sacstudiosargentina]

One of the best videos showing us how to dissamble a G29 correctly

[@PaulinhoThompson]

Kind words, thank you.

[@slowster2945]

I'm experiencing quite a bit of wobble as well, with a G923. Might be a good opportunity to remove the clamps and add a custom wheel rim whilst fixing this issue all in one go. Thanks for the video!

[@PaulinhoThompson]

Sounds like a great idea, and thanks for watching 👍🏻

[@rig4O4]

You, my man, are a life savior. But before I mess around with mine, I think I'll wait until the warranty ends in june. At least I already found a good video to guide me on that.

[@PaulinhoThompson]

Thanks very much 👍🏻

[@paulparsons5431]

My G29 didn't have the wobble issue, but i was trying to solve my clunk issue when hitting the full lock. This video just helped me, where which screw came from where.

[@PaulinhoThompson]

Glad it helped, cheers.

[@RacerIDMedia]

Very Good tutorial. Remember guys put the screwdown plastic knobs INSIDE the top cover before you put the top back on. I got it all back together and had to take it all apart again. Ugh. Also you may as well tighten every screw you can see. I found a bunch of loose screws in different places. Basically a bolt check everywhere.

[@PaulinhoThompson]

Great tips 👍👍 and thanks.

[@sdot13tube]

This comment is so overdue I finally decided to fix mine It got to the point where I couldn’t take it anymore, so today I went at it and was done in 15 minutes!! Perfect, you’re the man!!

[@PaulinhoThompson]

Thanks for the response I appreciate it, and well done on fixing yours.

[@pennywisef1169]

I'm really thankful! Really clear and well explained. Worked with my g920!

[@PaulinhoThompson]

@@pennywisef1169 that's brilliant news, well done 👏

[@gtp_vexd3507]

Absolute legend thanks! I had three loose screws under the wheel boss. No need to dismantle it after I tightened those. You’re a superstar for uploading this clear and helpful video.😋👍🏽

[@PaulinhoThompson]

Very kind words, I'm glad it helped 👍

[@michaelfagan6123]

So I've been following along step by step. Got down to where you remove the paddle shifters and I don't notice the wobble on the shaft. I'm gonna go ahead and finish taking it apart and making sure all the screws are tight. Thank you for making an easy to follow video.

[@PaulinhoThompson]

Thanks for watching and good luck 👍

[@michaelfagan6123]

@@PaulinhoThompson thank you. I went over all the screws that you showed to double check tightness and put it all back together. Minimum wobble like you showed so I think I'm all good. Thank you once again.

[@PaulinhoThompson]

@@michaelfagan6123 brilliant news, well done 👍

[@tuqn2377]

Thank you so much Paul! I had this issue for months and thought it was normal. You are a legend for making this video. Greetings from Turkey!

[@PaulinhoThompson]

No worries, glad I could help.

[@MateuszWiesioek]

one of the best tutorial i've seen on KZbin. Great JoB!

[@PaulinhoThompson]

Very kind words, thank you.

[@MarnikBradt]

Great... solved my wobble by following this guide. Appeared to be some loose screws in the wheel in my case.

[@PaulinhoThompson]

Brilliant news 👍

[@supercededman]

Absolutely brilliant. My G29 had a significant amount of wobble. I thought it was just wear and tear, and could not be fixed. You're a genius. Thankyou.

[@PaulinhoThompson]

Kind words, and I'm glad you sorted the wheel wobble.

[@lesblase3667]

I appreciate this well put together video more than you’ll ever know Sir! Thank you so much!! Thought it was game over for me

[@PaulinhoThompson]

I'm so glad it helped you 👍👍

[@wolfruler3267]

Thanks man it’s really worked! After taking it apart the motor mounts where perfectly secure so I just put the wheel back on and it wasn’t wobbling so I guess the part where the paddle shifters are was loose. Super good tutorial, Thanks!!!

[@PaulinhoThompson]

Happy to help, and well done on fixing it.

[@0x15e]

Thanks for the thorough coverage of the disassembly. That'll be a big help!

[@PaulinhoThompson]

Happy to help 👍🏻

[@ROBOTOX_CZ]

My brand new G29 had also quite a big wobble. Strangely enough, when disassembled, i didn´t found any loose screw. Everything was tight from factory. So when it was all disassembled, i at least added some more lubricant to all the gears and oil into the top bearings under the brass pinion gears. When assembling - you need to apply Loctite on the black screws holding gearbox in place - at least on the four that are at bottom of the unit - there are tightened agains plastic so they can´t be tightened with a big force otherwise plastic under the screw cracks. Well after assembling it - wobble simply disappeared, wheel is now tight and feels great. Don´t know where the problem was but it´s gone.

[@PaulinhoThompson]

@@ROBOTOX_CZ glad that it's been resolved 👏

[@andrecadogan5671]

Thanks so much, I haven't had the wheel long and I thought it was faulty but the screws the hold the wheels to the hub were a bit loose, really good video. Thanks 👍

[@PaulinhoThompson]

Thank you for watching 👍

[@Ridian98]

Thank you so much bro, I got a full size wheel adapter running an deep dish wheel for dirt rally and was literally feeling like it was gonna fall off last couple months I'm not exaggerating it was literally nearly hanging off 😂. Took it apart and found it was only being held in by 1 screw not 3, no idea how that has happened as it was brought new from Amazon, added the new 2 screws and tightened the original one and it's like brand new no more loose wheel.

[@PaulinhoThompson]

Happy to be able to help, your wheel sounds awesome 👍

[@j.3o21]

Thank you. I have the wobble and I will be trying this soon as I get home

[@PaulinhoThompson]

Good luck with it :D

[@j.3o21]

@PaulinhoThompson hey man, I fixed it, was the same screws in your video. I did also notice the bracket around the bearing was cracked. Everything is still working in good order so I might just leave it. Any thoughts on this? Also thank you for your video it has saved me a lot.

[@PaulinhoThompson]

@@j.3o21 that's good, nor sure on the bracket, other than bonding it or a replacement?

[@MrPropanePete]

Thanks for putting this up. I'll stay off the ripple strips

[@PaulinhoThompson]

LoL no worries

[@berkeskimuftuler8892]

that's what I'm looking for... Thank you so much brother 🤜🏻

[@PaulinhoThompson]

Awesome 👌

[@MrOrangecows]

Video helped a lot ! My situation was a bit different though, the steering wheel itself was loose connecting to the driving shaft. So I just tightened down the three long/large phillips head screw in an alternating fashion till all 3 screws were fastened. Keep in mind that you are screwing into plastic so don't over torque, you may run the risk of stripping the threading. Cheers :)

[@PaulinhoThompson]

Glad it helped, and well done on fixing yours 👍

[@trevordeloa4003]

Thanks so much, even though I didn’t have a gap in the plate to the plastic like was in the video, I still made sure to tighten everything super well as mentioned and after tightening everything and adding some hardware, it’s all fixed. Thanks a ton

[@PaulinhoThompson]

That's brilliant news :D well done.

[@EchosGaming360]

well this was interesting. took apart my wheel following your instructions (good instructions btw thank you :] ), and turns out the reason there was wobble is because there was a giant CRACK on the black part that was meant to be tightened...

[@PaulinhoThompson]

Oh that's a bugger, can it be fixed/glued ?

[@EchosGaming360]

@@PaulinhoThompson my parents recommended trying glue, but that introduces another risk factor of glue potentially getting into the motor. So I just tightened all of the other loose screws

[@PaulinhoThompson]

@@EchosGaming360 brilliant news

[@Chris_Stratohawk_Cook]

Thanks for the video, well done. Since this seems to be a common issue I'm going to put a drop of super glue on the side of the screw heads that cause the wobble after I tighten the screws.

[@PaulinhoThompson]

Sounds like a plan

[@faissalbatir1674]

Thank you, now i can play without those wobbles

[@PaulinhoThompson]

Great news 👏

[@laseonestar]

Thank you very much sir The best how to video on this in my opinion High five from Denmark A member of Amigos Racing Team UK 🇬🇧

[@PaulinhoThompson]

Thank you very much 👍🏻

[@YKazimir]

What a great video, thank you for the instructions, Paul!

[@PaulinhoThompson]

Nice comments and thanks for watching.

[@strokemacat]

Ive just bought one so i can fix it, video was 10/10

[@PaulinhoThompson]

Awesome stuff 👍👍

[@haggardmelon]

Thank you for making this video! I just noticed the wobble in mine recently and thought there would be some worn out bushing or something. Glad it may just be some loose screws. Edit: Unfortunately, my problem is the giant bearing is able to move around a bit inside the housing. Hopefully I can find a way to tighten that up.

[@PaulinhoThompson]

Thanks, that's a new one on me, maybe a sleeve would work or new bearing.

[@AlbiM1]

You are an absolute Legend man, thank you so much!🙏

[@PaulinhoThompson]

Thank you for watching 👍🏻👍🏻

[@AlbiM1]

@@PaulinhoThompson No man, thank you for the help. I've been struggling with this wobble for months!

[@gamershadow1]

Thank you very much for this. It fixed my wheel for me. 🍻

[@PaulinhoThompson]

That's brilliant news 👍🏻

[@Flight737]

Thanks so much man! I took it all apart, realized it was just the three big screws in the middle 😂

[@arranmc182]

get some spring washers on to keep the tension on the screw as will help to stop it backing out or if you want you could use Lock Tight Thread Lock but if you ever need to take out the screw its going to be a hasle

[@PaulinhoThompson]

Great tips.

[@Jbyrneham]

excellent video Paul, much appreciated. excellently explained too

[@PaulinhoThompson]

Thank you for those kind words, and I'm glad I could help.

[@chad5573]

to prevent this for happening again maybe use some blue loctite like the one found on the screws that hold the pedals secured.

[@PaulinhoThompson]

A great tip 👍

[@romanflores5505]

Was gonna recommend the same

[@DrAcula-kz6wy]

Thank you for this, my issue ended up being the 3 silver screws holding the wheel to the base on my G920, so didn't have to take the top of the base off. Also now I don't have to mess around with trying to get my G27 wheel up and running instead, with software uninstalls and reinstalls! Haha

[@PaulinhoThompson]

That's brilliant news, well done 👍

[@jeffantypasandbalbeewarthu899]

is it an easy fix

[@jeffantypasandbalbeewarthu899]

@@PaulinhoThompson is it an easy fix

[@cmbaileytstc]

Thanks man. They ought to put some thread-locker on those screws at the factory.

[@PaulinhoThompson]

No worries, and yep you're 100% right.

[@raisin39]

Great presentation, every helpful. Thank you

[@PaulinhoThompson]

Thank you 👍🏻

[@darkhorse581]

Thank you for the video. Will a bit of glue and better screws fix the problem permanently?

[@PaulinhoThompson]

I reckon it would, yes.

[@Gixxerkid600]

This helped so much thank you!

[@PaulinhoThompson]

Happy to help.

[@tylervardy3917]

Mine FINALLY let go last night after its last drift session before I switched over to an F1 car and realized how much movement there was in the base... I guess I hadn't noticed since the wheel was always spinning lol Thanks for the save Boss! I'm assuming a 2 hour job from start to finish? 1.5

[@PaulinhoThompson]

Yeah it's not too long or bad a job, good luck 👍🏻

[@marchoy3809]

Thanks for this video. I don't know if you can help me but I bought one of these wheels off a friend (he didn't look after it). It works fine and isn't wobbling but it does feel a bit "grindy" when in use and doesn't feel smooth when turning it. Can you offer any advice or support at all? Many thanks.

[@PaulinhoThompson]

Thanks for watching, the gears inside sound a little dry. But the wheel does feel a little textured when turning.

[@ludotess9824]

THANK YOU!!!!!! you save my g29 very good job

[@PaulinhoThompson]

Thanks for watching 👍

[@trkcds7365]

Great video sir, questions. Does your wheel feel stiff too? Mine seems little stiff, cant turn slow since theres like a friction in the gear. Should i put grease to it?

[@PaulinhoThompson]

Mines not stiff to turn, and the gears are greased a little 👍

[@dumpstermeat]

I couldn't really understand if I was having this problem or not, by hub what do you mean? the little sorta, cylinder right behind the wheel? and is this absolutely necessary to fix? Very good video and made me less worried in the case I do need to fix it, thanks!

[@PaulinhoThompson]

That's good to hear, if it wobbles as much as mine did, then fixing it makes a huge difference to how the wheel feels.

[@dumpstermeat]

@@PaulinhoThompson Hm, I might wait a bit then, I'll save this vid for later! :)

[@PaulinhoThompson]

@@dumpstermeat good on you.

[@marzio585]

Great video 😊 thanks for the help

[@PaulinhoThompson]

My pleasure 👍🏻

[@racefeen22p]

Great vid. Looks like a whole pain in the butt, but I got to do it. Will be adding blue loctite.

[@PaulinhoThompson]

A great idea, let me know how you get on.

[@AVRVids]

Thank you sir.

[@PaulinhoThompson]

Thanks for watching 👍

[@stu1987eng]

Mine isn't the whole centre shaft moving like yours.... just the wheel itself has come loose and wobbles,looking behind the wheel and wobbling it shows that none of the centre piece moves at all

[@Bramon83]

I backed my chair into mine watching tv the other night and now have a bit o wobble. Been thinking about trying this

[@PaulinhoThompson]

Oh bugger, I hope it's fixable.

[@ibanezrg320fm]

I don't have wheel wobble like yours. I have a loose left and right turning problem. Do you know how to fix that? If the steering wheel is perfectly centered, the wheel is loose from about the 11 o'clock position to the 1 o'clock position. I want to make that tighter but idk how.

[@PaulinhoThompson]

Sounds like something on the centre shaft or hearing inside. I suspect you'll have to take it apart and have a look inside.

[@FireShadeZ]

I bought mine a week ago and it doesn’t do this, but now I know how to fix it if it happens 😀

[@PaulinhoThompson]

Good stuff, enjoy it.

[@sixdaysontherun6996]

Even if you tighten them screws back up it will highly likely fail again soon. The plastic has weakened and became brittle. I done a vid on bolting it back together which will fix this solid its tricky but can be done without further dismantling or damaging the big internal cog . Or you could perhaps superglue the original screws back in but thats supertricky and got to be fast. Dont know how effective it would be. Other options are i hear theres a metal housing that can be bought on amazon. But thats more cost and alot more dismantling. involved. Never buy a second hand g29

[@Trancelistic]

Nice video. I got no wobble but my left shifter (on the wheel) Doesn't work anymore:( You think its an easy fix?

[@PaulinhoThompson]

Should be, it's only one switch 👍🏻

[@Adiskl]

thank you

[@PaulinhoThompson]

Happy to help 👍

[@hotspotkage7998]

Is it Not better to do new screws and maybe little bit hot glue on the Side from the screws ?

[@PaulinhoThompson]

Worth a try :D

[@user-oo8zt1sc1c]

DamN! What a poor design from Logitech!. My wheel is only 4 months and already giving this problem. Thx for your help. Could we find a definitive way to avoid this happen in the future. I Think it is not nice to be doing this procedure frequently.

[@PaulinhoThompson]

Thanks for watching, it's a little weak isn't it. Maybe some form of bonding the screws in ?

[@user-oo8zt1sc1c]

@@PaulinhoThompson exactly! Thx!

[@mickyevs3902]

Thank you so much. Problem solved.

[@PaulinhoThompson]

Brilliant news 👍

[@bangburhan]

thanks alot, gonna try this later

[@PaulinhoThompson]

Good luck 👍

[@mattcowlard4662]

Hi my wheel wobble is just the outer wheel connecting to the alloy... How would i go about tightening that? As all the screws r tight, its like it needs bonding? Thanks

[@PaulinhoThompson]

That's a new one on me. The wheel rim should be connected inside the center cap. You'll find different sets of screws holding it to the base, and the hub that goes to the inner part of the wheel.

[@ognjenmilosevic9195]

Still same problem, i did everything like you did in video....

[@PaulinhoThompson]

That's an unusual one, very odd.

[@grantlauzon5237]

Pedal wobble? G923 but it’s probably similar. It’s on all of them but only noticeable with the brake. Side to side movement that makes a click sometimes.

[@PaulinhoThompson]

That sounds annoying and something I've not experienced yet.

[@grantlauzon5237]

@@PaulinhoThompson So I guess mine was just built like that. kzbin.infoYO8t6X4vPBI?feature=share Me taking it apart.

[@grantlauzon5237]

It didn’t work. The clicking must be something else.

[@vinska1361]

Thank you.

[@PaulinhoThompson]

Thanks for watching my video.

[@vinska1361]

@@PaulinhoThompson Thanks for fixing my steering wheel :D it was starting to be pain in my ass.

[@vedangkhandare2588]

I did like you said in the video but it was not screws holding the gear drive mechanism to the shroud that were causing the wobble but the three long screws that attach the wheel itself to the hub are causing the wobble unlike your wheel my wheel that wobbles up and down my one wobbles side to side. I have no idea how to fix it. I tried paper fittings where the screws are but they just get torn apart. maybe you can help

[@PaulinhoThompson]

Are the screws not tightening in their thread ?

[@anubhavjain4371]

Thanks mate

[@PaulinhoThompson]

No problem 😊

[@dutchie1010]

awsome video thank you. i have the same issue. will fix it soon. thank you for the video

[@PaulinhoThompson]

Brilliant and thanks for watching

[@minazzo79]

Thanks

[@PaulinhoThompson]

No worries 👍

[@gigihpratama8425]

hi, I need your help I just lost the 6 screw from back of the wheel. what size exactly is that screw?

[@Viewsfrompablo]

Thanks that was good video

[@PaulinhoThompson]

Thanks for watching 👍🏻

[@DemVerse]

Thank you!

[@PaulinhoThompson]

No worries 👍

[@djaydeved]

thanks man, my wheel had a slight wobble, turns out the 3 screws what which hold the wheel hub to the drive bit were loose, also theres a pesky clip under the dial so if it dont come off then get a little bit of a angle on it, i dont entirely think it matters if the clip is broken or notcan tell the plastic for the clip is abs cause it turned white on me whoops, oh well stressed it a bit, what'ma goona do bout it, nothin.

[@PaulinhoThompson]

Glad it helped and thank you for the comment 👍👍

[@john2211.]

I have the problem that the switching display just like the shifters and the buttons don't go at all at the beginning it has already licked around when you have steered to the right at ps4 in the share menu etc. You know what the problem is this is

[@zakfletcher2578]

Any ideas to prevent the problem from happening again? I'm planning to repair mine here in a few days for the same issue but I'm not certain what the cause was. Whether manufacturer didn't tighten the screws or if they came loose from typical use

[@PaulinhoThompson]

Maybe using thread lock, although I've not tried it.

[@noahmelsom5750]

Thanks it’s like new again 👌

[@PaulinhoThompson]

That's awesome news 👍 well done.

[@kydoan3873]

MY problem is diferent, no any screw loosen, I think somthing was cracked, any way thanks yours video

[@PaulinhoThompson]

No worries, I have heard of the mounts cracking 😣.

[@williansvasquez2335]

I have a problem when i turn the wheel completely the wheel start to bounce and i lose the alignment with the game, what can i do?

[@PaulinhoThompson]

Sounds like it could be one if the gears jumping, have you opened it up ?

[@williansvasquez2335]

@@PaulinhoThompson yes but all is ok, all parts are in place and screws are tight. Any solution?

[@bardeventronsaune645]

What dimension or size on the screws under the wheelbase tightened in holes? (x8)

[@Tacko14]

Also, the tiniest part of the wheel might go awol: the ps3/ps4 switch. Not the plastic button, the real one inside. Lost it, found it, put it back (tweezers) the wrong way, gotta open up the whole thing again

[@Tedybear013]

Mate, having the same problem, like, i didn't see any part for the switcj between ps3-4, do u know hoy to fix it? Or have a picture from the part?

[@Tacko14]

@@Tedybear013 It’s about 3x3 mm square, T shaped, plated on one side. I gave up and bought a new wheel

[@Tedybear013]

@@Tacko14 dude if u play on pc it will work with no problem, anyway, you have a link where I can see the piece you mention? Just to finish with this, thanks

[@rstrn8s]

@@Tedybear013 Happened to mine as well, that little ⊥ slider piece is so small had to use tweezers to put it back in. But then the ⊥ slider was loose so the casing on the circuit board needed to be bent back so it wouldn't fall out by itself. It did slide side to side for PS3 & PS4 mode but the extra pressure of the bent casing caused the top piece of the ⊥ slider to fall off. Took a small pin and pushed it to the PS4/PC side and left it there.

[@martingolding4951]

Slight wobble on mine all I did was tighten the casing screws and now no wobble they have a tendacy to become loose over time due to vibration

[@PaulinhoThompson]

Good advice 👍👍

[@MrTiti]

Hello guys, very important question: I have today unboxed my new wheel. G29. I owned a Logitech MOMO Force from 1999 and taht thing was awesome quality. But this G29 is STILL in the plastic bag. and the wheel has play. you can steer left/right of about 2mm. this play of 2mm means that there will be no forces on the wheel. the last wheel and all wheels in my life i know of do NOT have this problem. Do you also have this problem? why has a 250€ wheel play ?!

[@MrBlood891]

So after unscrewing every bolt from center piece, i was still not able to remove it, it felt like its just stuck there, did i forgot to remove a screw or something? Can i repair it without removing the center piece?

[@PaulinhoThompson]

Sounds like it's still held in with a screw? Maybe it's bonded.

[@sbokvtok1795]

Hi man, i dont have problem with wobble.. but when u picked up my wheel and turned it upside down and little screw fell out (broken in half), do you know by any chance where it might be from ?

[@PaulinhoThompson]

Sounds like it could be a case screw, a but strange though.

[@ashton_gaming8670]

I have a problem with my G920. It’s not the wheel it’s the power input at the back bottom of the wheel and when I plug 🔌 the power cable in it wobbles and sometimes gives off a single spark when I plug it in, also the cable of the power unit is flattened and damaged and I can buy a new for for £20 but I don’t know if the wobbly internal plug is what stops it from working. Please give me a res-ones if you can.

[@PaulinhoThompson]

It sounds like the plug socket has come lose either in its mounting or on the pcb. It may require soldering to fix it.

[@ashton_gaming8670]

@@PaulinhoThompson How would I do that or take it apart without damaging it.

[@PaulinhoThompson]

@@ashton_gaming8670 very carefully, you may be able to bond it in place ?

[@ashton_gaming8670]

@@PaulinhoThompson ok and do I have to take the wheel off and all of it apart to do it?

[@PaulinhoThompson]

@@ashton_gaming8670 yes I think you will have to.

[@daginge29]

Are the bolts not tight from the factory? Just trying to figure out if it's going to happen again, and I'll be opening mine up in another 2 month. Not handy if so. Had it for 2 months and has developed bad wobble over last week.

[@PaulinhoThompson]

It does seem that some units were loose like mine.

[@daginge29]

@@PaulinhoThompson ah, I see. Going to attempt the fix today, cheers for the detailed vid!

[@PaulinhoThompson]

@@daginge29 no problem and good luck 👍🏻

[@daginge29]

@@PaulinhoThompson that's me done it, pretty straightforward, but the screws in the inside were all tight! The 3 long ones took a wee tighten, but I still have wobble. God knows why. Do you reckon it'll be covered under the warranty?

[@PaulinhoThompson]

@@daginge29it could well be 👍🏻

[@Thee.Mighty]

I have brand new wheel g923 and it wobble a little should I open it?

[@PaulinhoThompson]

I would take it up with Logitech, as it shouldn't wobble from new.

[@licmemogar]

tanks!

[@PaulinhoThompson]

No worries 👍

[@shaneweightman]

I guess over time , the weight of your hands and arms hanging off the thing at a weird angle putting pressure on it , is the course

[@PaulinhoThompson]

Yeah just general usage, but an easy fix.

[@maiklchannel4785]

Hey man, maybe u know how to replace force feedback completely from g29? I mean wires,microschemes and stuff

[@paulsabatier4168]

do you know how to replace the plug you show at 5:10 ? i have the red wire that is out of the plug and i don't know what to do

[@PaulinhoThompson]

Has the wire just come lose, as sometimes you just need to push it back into the plug. If the wire is broken, you can reinsert it into the clip.

[@paulsabatier4168]

@@PaulinhoThompson the wire is broken. i reinserted but it don't work... do you know if i can replace the cable ?

[@PaulinhoThompson]

Yes, I'll look later, as I've seen them somewhere.

[@Brodestar_1207]

should the wheel still have a little bit of wobble in it because i got mine 2 days ago and it has wheel wobble a little bit

[@PaulinhoThompson]

It depends on how hard your moving it, but ordinarily I'd say no.

[@Brodestar_1207]

@@PaulinhoThompson ok thanks

[@gtmegtme7905]

thanks a lot good

[@PaulinhoThompson]

Cheers 👍

[@Zanaga2]

Do you see any problem about adding lock washers in those screws so it does not happen again?

[@PaulinhoThompson]

Definitely worth a try, or thread lock.

[@Zanaga2]

@@PaulinhoThompson I'll try the lock washers, there's a lot of them here at home. But I'll consider the thread lock my plan b haha. Thanks.

[@PaulinhoThompson]

@@Zanaga2 good luck