Logitech Momo - 900° HOW TO Make | Step by Step Instruction | 30$ Wheel in 2021 | Gameplay

[@kremator-z9c]

Спасибо большое за подробное видео по переделки руля на 900. Вы единственный кто показал полный гайд.

[@samkovplay3622]

Без проблем)

[@rgrsgsgsrg1872]

@@samkovplay3622 Hey can you make a tutorial on how to setup the momo and calibrate it please?

[@samkovplay3622]

You will find this video on My Channel.

[@bass2762]

@@samkovplay3622 Hi there, which of the parts in the files you sent are printed for this video?

[@ЕвгенийВитязь-й5ж]

Это не 900° а всего лишь 540°

[@ИринаПростова-щ7л]

You have golden hands! Thanks! Take note!

[@HJuneOh]

I tried this. It is good to be able to use 900 degrees while using original parts. The gearbox part may come off when the steering wheel is turned, so a simple part may be needed so that the top cover can press it.

[@bass2762]

Which parts did you print out to get it to work?

[@HJuneOh]

@@bass2762 I used gear case (not helical), 1.5 ring, ring 1&2 (900degree)&3 (900_600degree) from the file available in the article below for the original parts because it takes time to get the belt. Kindly, the composition of the old product could be checked through the attached video link. And I added a hard foam that presses from the top cover to the gearbox to prevent the gearbox from falling out.

[@hanifarsalan3339]

@@HJuneOh which gearbox?

[@HJuneOh]

@@hanifarsalan3339 Body-1_v1 & Body-2. check out this video. kzbin.info/www/bejne/qpjaq4yjr96KmcU&ab_channel=SeGord You may need to allow the cover to press down on the gear case.

[@hanifarsalan3339]

@@HJuneOh do you cut some part of original wheel? or just plug and play?

[@phakaponboonma9417]

Hello, from the 3d files you gave, Im not sure which one to print. Could you please list them for me ?

[@unCIVIClizedVNZLA]

Wow.... where can you get that kit of parts for the modification?

[@winninggm]

Logitech gt force. Can do it? Bro

[@Karek53]

Hey, thanks for the vid! Did you use any type of lubricant on gears? I wonder how it's going to affect the reliability of this mod.

[@Enes_Yildiz]

very wise. congratulations

[@raccoonratata8135]

Hello, loved the walkthrough it's great. But where can i get the files? 😊

[@MVGEN36]

i have found link a Gdrive link and actually manufactured parts myself ORIGINAL (.rar format): drive.google.com/file/d/1xu7rnIPKdUT_53sxBjWyr_dKZLop4v6J/view?usp=drivesdk Fan mounts(.zip format): drive.google.com/file/d/1RGoqVu6kucKSqlkPCCmv122Uwm1G13E8/view?usp=drivesdk

[@WToSieGra]

WOW! It's really great job!

[@samkovplay3622]

Thank you!

[@wangfeng175]

Great work!!❤

[@sky173]

Fkn brilliant! Where do I purchase these parts?Thanks for sharing!

[@Kedicik010]

Anyone is know how do i get 3d parts Or can i buy it ?

[@nicko22e]

hola me gustaria saber si las piezas las compraste en alguna lado?

[@LaLiga717]

Where do i get all those things he showed in the beginning in order to complete this process???

[@kemalsatc448]

Can you share the dimensions of the parts needed for the mod please?

[@cengel7318]

Bulabildin mi hocam

[@bugracakirr]

@@cengel7318 Bulabilen var mı?

[@cengel7318]

@@bugracakirr ben yapmamaya karar verdim. Direksiyonu riske atmaktansa 240 ile oynamaya devam ederim. Çünkü kesip yapıştırılan parçalar var ve kayışları bulması da ayrı dert.

[@Olivier13680]

hello ! where can i found a kit with all these pieces ? i dont have a 3d printer ! thanks

[@nelchan2421]

please make a wheel swap with momo drift wheel the 13-inchs yellow and black one

[@jeh5c]

do i need new gears. i really care if its smoother. just want 900 degrees steering will just the rings work for 900 degrees steering?

[@NaitorStudios]

Could you please specify which parts were used in the video? As they are named on your files...

[@bishopnoobspree8786]

Love this, man!

[@samkovplay3622]

You are welcome!)

[@bishopnoobspree8786]

@@samkovplay3622 Can I know exactly what parts you used for me to search and buy?

[@samkovplay3622]

I bought this kit from the local guy in Russia. Probably you may search something like: “Momo 900 degrees kit” or something like that. There are several versions of it, 900 or 600 degrees, with or without belting.

[@bishopnoobspree8786]

Unfortunately, I can't find this kit on aliexpress or ever ebay :( Do you know anywhere I could buy this kit online and shipped to Sri Lanka?

[@alialiyev3796]

I did the same, but I have axis problem . Normal 0 is my -2304, 2304 is my 0.

[@samkovplay3622]

Change the power supply connection to the motor. Place black to red and red to black position.

[@juanesmendoza6945]

Hola, deberías hacernos el grande favor de subir planos o algo parecido para saber cómo imprimir en 3d las piezas necesarias

[@samkovplay3622]

There is a link to the models: drive.google.com/file/d/1xu7rnIPKdUT_53sxBjWyr_dKZLop4v6J/view

[@juanesmendoza6945]

Muchas gracias bro

[@samkovplay3622]

Por favor amigo!

[@colpoismael]

oops great video I'm thinking of purchasing one of these steering wheels and with your very simple video I saw that you can transform it to 900 degrees, do you know where I can buy this adaptation kit?

[@ihsansahinyilmaz87]

Hello my friend, thanks a lot for the video :) . Will the black and red wire you showed at 16:47 minutes be swapped?

[@samkovplay3622]

Yes. Because of belt drive the rotation has changed. That is why you need to change the motor rotation.

[@ihsansahinyilmaz87]

@@samkovplay3622 Thank you 🙏

[@samkovplay3622]

You are welcome!

[@mino2408]

Hello, does it work on the Formula wingman force Gp?

[@overallself]

I can't find these parts anywhere. Is there a website where we can get it?

[@cristopherrodriguez5082]

Hola me puedes ayudar de favor donde puedo comprar el kit para actualizar el giro de mi volante, también es igual al tuyo

[@motokrockle514]

Thanks. Now my logitech momo is broken.

[@nikolaoskousoulas]

Hello. Where can i find the 3d models to print them? thanks in advance!

[@yaqinsayed5249]

Hi could this be done with the ferrari 458 spyder wheel?

[@mb-ls5vw]

Wow impressive upgrades. Well done. But how did you use the gear on motor shaft for the belt. Does it grip it well if it does what type of belt did you use?

[@samkovplay3622]

I used the original metal motor gear. The belt model is GT2-6. For the proper grip, it is necessary to tension the belt by shifting the position of the motor.

[@swear_bob]

how can i buy the parts i don't have a 3d printer

[@arthur140188]

hello, very cool your video.. How do I buy this kit?

[@Zarvynx]

Do I need to get rid of static electricity?

[@fundubs8951]

Hey bro can we do in other steering wheel?? 🤔

[@АлексейНонеймов]

вопрос не по видео , но про руль этой модели..вдруг сталкивался с таким...сюжет трагедии - под десятой виндой ни с логитеховской софтине ни в напримр project cars 3 не работают кнопки справа на руле+правый подрульный лепесток ..а уж думал померло чего , но например в asseto corsa эти кнопки работают...не встречался с такой фигней ?

[@Douglas3Dprinting]

o force ffedback ficou mais fraco?

[@parathoxicz1720]

Is it worth? Does the feedback gets weaker or? It might loose feedback idk

[@danieldosanjos9931]

What is the printing material?

[@royaledino126]

Did you 3d print some stuff or where did you get all the other neded parts

[@samkovplay3622]

I bought it from the local store but you may 3D print it using 3D models. You may find the link to this models in the comments below.

[@royaledino126]

@@samkovplay3622 ok well its a good video but i dont understand how it works XD

[@gibon3351]

What belt u used in this video? How long IT is

[@sq0ad]

Best tutorial! But, i have a question, where can i buy the parts? (the website)

[@BobbysFixAll]

i wanna know too

[@kakwi9588]

It's a good idea but I can't open the files with that mods

[@ramawisnu1106]

Could resend the 3d files again?

[@Saifullah-Qazi]

Bro i tried this with my pxn v3 pro and it is even not moving full 900 degrees but also not working😭😭😭😭 Please help me!!!!!!!

[@mb-ls5vw]

Today i measured that logitech momo wheel to motor ratio is 1::39. What is the ratio after your mod.

[@kacpper2741]

Hi, I could ask for a link to the project in which you do not need a belt, best regards

[@jdmisbetter]

Is it okay if we just use the stopper piece and not the gears?

[@SLMeowMeow]

Tôi có Logitech wingman formula force gp , nó sử dụng biến trở. Bạn có thể giúp tôi mod lại biến trở bằng cảm biến khác không? Cảm ơn

[@ДианаРахимберди]

Ты мне очень помог, спасибо тебе большое, советую

[@samkovplay3622]

Без проблем)

[@JohnD0h_IT]

Very nice mod, I'm thinking to doing it! Thanks you very much for sharing, great video, I really appreciate it!! You don't use the Pulley-23 on the motor for the belt, or I'm wrong?

[@samkovplay3622]

I decided not to use Pulley-23. Most of people use it.

[@marcelmojzis4374]

@@samkovplay3622 If I don´t use Pulley-23, can I use belt 164?

[@samkovplay3622]

Yes. But you will have to modify the motor mount part for better fit.

[@marcelmojzis4374]

@@samkovplay3622 Yes I know. Like in your video at 9:09 - 9:35. Thanks.

[@muhammed_sf29]

How much is the set of action in this video?

[@samperyk]

Здраствуйте. Форсфидбек после мода умирает?

[@akosnagy9885]

can you do that with thrustmaster ferrari red legend?

[@samkovplay3622]

Probably it is possible but I don’t have models for this type of wheel and don’t have this wheel)

[@antonie.1004]

Would love to see a link to these parts for the wheel, I am from US and couldn’t find them on ebay.

[@samkovplay3622]

The only thing you can do is to make the details by yourself using 3D Printer. You may find models here: drive.google.com/file/d/1xu7rnIPKdUT_53sxBjWyr_dKZLop4v6J/view The belt version requres 2GT-166 6 mm belt. You may easily find in on Aliexpress. Hope this will help.

[@karoldrozdz813]

Do you mind sending me links to the parts?

[@michaelda94]

and the 3d models to print?

[@juanesmendoza6945]

Saludos desde Colombia muchas gracias por este video, fue más fácil entenderte a ti, que a otras personas en otros vídeos

[@samkovplay3622]

You are Welcome my Friend!

[@juanesmendoza6945]

@@fran_varela__ si me puedes regalar el link, te lo agradezco

[@estampadosybordadosdelcafe9302]

Hola lo pudiste copiar. ?

[@nicko22e]

@@juanesmendoza6945 hhola bro sabes donde comprar esas piezaS?

[@solserangel5681]

извините, а откуда детали эти брать?

[@Dallebayob]

Классный гайд.А где купить запчасти ? можно ссылки? 🙏

[@samkovplay3622]

На Авито есть комплекты к продаже.

[@skypramane]

I just want to 900 degrees mod. Which folders in the "Logitech MOMO Mods" file do I need to 3D models print with a 3D printer?

[@notupi]

Actually if you want just mod to 900 degree the cheapest solustion is block some hole on the rotari sensor, but as he answer in previous comment, there's no turn protection and maybe break your cable, however if still want to just mod 900 degree you can check my video how to do it

[@wawanwelt8972]

Im sorry but I’ve received the link for part. So now i have to print which folder?

[@Farynn]

Hello, first of all thank you for the video, but I can't find the files for the stuff you need to convert it that way. Do you happen to have the links for the files needed to convert it ? I would be very happy.

[@ihsansahinyilmaz87]

Hello, the steering wheel does not stop in the center. In Logitech software, my steering wheel turns 100% right and 83% left. Could the 21-speed gear be problem?

[@samkovplay3622]

I suppose that you need to make correct calibration.

[@ihsansahinyilmaz87]

@@samkovplay3622 I don't know how to do this, can you help me please?

[@samkovplay3622]

Do you have 900 degree mod or the base version without mods?

[@ihsansahinyilmaz87]

@@samkovplay3622 900 degree

[@ihsansahinyilmaz87]

@@samkovplay3622 I watched your video and did everything the same.

[@fersaherez2128]

Hey Samkov, what did you use to widen the motor holes?

[@jdmstyle1495]

No needs

[@graphband]

Hi. How can i get stl files and can I learn the pulley dimensions?

[@Douglas3Dprinting]

Tem o link para os arquivos 3D?

[@papuga07]

Can i just connect the encoder disc to stock biggest gear?

[@samkovplay3622]

No. It will not calculate rotation correctly.

[@agtzayn]

what size drive belt bro

[@kerko2588]

What kit are you using in the video? And what's the difference between using a kit that has no belt compared to one with belt? (for example kit 1 vs kit 7)

[@samkovplay3622]

The belt makes your wheel quieter and smoother.

[@kerko2588]

@@samkovplay3622 Ah thank you. But what kit are you using in the video?

[@samkovplay3622]

I use belt version as you can see and 900 degree limiters.

[@twojastars]

​@mr. fiddlesticks what

[@magnom3922]

​@mr. fiddlesticks was it good?

[@vvxrmx]

А не подскажите где взять детали для улучшения руля?🥺🥺

[@samkovplay3622]

На авито продают такие наборы

[@chelovek4532]

www.youtube.com/@segord6473

can you share the 3D printed file about the mod parts in the video?. I can't find it on google

[@chelovek4532]

www.youtube.com/@segord6473

[@darkflow5314]

Very cool but where I can buy the parts for the mod?

[@samkovplay3622]

If you have access to Russia, then you can easily find it on Avito. If not then you may 3D print all needed parts.

[@juanesmendoza6945]

@@samkovplay3622 tienes los planos para imprimir las piezas?

[@samkovplay3622]

@@juanesmendoza6945 you may download models here: drive.google.com/file/d/1xu7rnIPKdUT_53sxBjWyr_dKZLop4v6J/view

[@joshuafisher4160]

Can I just take that stopper piece off? Will it work without the other parts you added?

[@samkovplay3622]

It is not a good idea, because you will need to control the center position yourself and you will need to change the number of holes on the encoder gear. There is also a risk of breaking the cable to power the buttons on the steering wheel, as there will be no protection against rotation.

[@x_ATLAS_x]

where you buy your piece

[@samkovplay3622]

Find link to the 3D models in the comments to this video.

[@wagner4125]

hello where did you get that or did you download it from the internet I would like to know I have a flyer of the same could you help me please I would appreciate it very much

[@samkovplay3622]

I bought this kit from local supplier in Russia. It is 3D printed.

[@samkovplay3622]

You may download models here: drive.google.com/file/d/1xu7rnIPKdUT_53sxBjWyr_dKZLop4v6J/view

[@wagner4125]

@@samkovplay3622 thank you I appreciate it

[@samkovplay3622]

No problem

[@chadog]

@@samkovplay3622 Thank you for sharing the files. Love the idea with the belt mod :)

[@MrPletnyov]

Друган, привет! Где такой комплект купить?

[@damindecker5456]

Will it work if i just take out the limiter

[@wawanwelt8972]

Can someone send me the exact stl file ? Im so confused there so much folder

[@myroslavzhuk314]

What is this cylinder for? 1:08

[@andrei_pedala03]

Hi, can you make me a file only with the parts for loghitech momo 900

[@andrei_pedala03]

Plz

[@gibon3351]

I have it i can send u this on e mail

[@MASTERPIECE_REDDITS]

Hey I really want to modify mine wheel but I need 3d printed limiters, so if you can answer this comment with link for limiters 3d file. I would really appreciate it 🙏

[@millermanson2475]

А где можно найти такой набор дополнений?

[@samkovplay3622]

На Авито.

[@qeismuhammad17]

Hey its AMAZING i will do it too but where i can get the tools can you show me where you get it

[@samkovplay3622]

You may 3D print it. You will find a link to the 3D models in the comments to this video.

[@qeismuhammad17]

@@samkovplay3622 where the link ?

[@samkovplay3622]

There is a link to the models: drive.google.com/file/d/1xu7rnIPKdUT_53sxBjWyr_dKZLop4v6J/view

[@gosha_99.5]

Где такой мод. Взять ?

[@Momodeus_]

This funtion whit windows 11

[@alanianpiotrowski6733]

Belt size pls???

[@joaosilvabarroso]

How to buy the installation kit

[@sirmarksalot100]

Song name pleaseeeeeee?

[@NguyenNguyen-fr9tt]

Hi mate can you tell me where I can buy those mods ?

[@luka8243]

where can i buy this items ?

[@SpinnerSpite]

How did you get it to work on forza?

[@samkovplay3622]

Just installed official drivers and that is all. But you have to use only Microsoft Store version, Steam version doesn’t support this wheel.

[@SpinnerSpite]

@@samkovplay3622 I have the microsoft store version on my Logitech Formula Vibration Feedback Wheel and when I try to assign stuff it just wont work

[@samkovplay3622]

Not sure that Logitech Formula is supported in Forza. Anyway, try to use “Forza EmuWheel” software.

[@Musa52520]

where do I get the files of the parts, I don't understand anything from the links

[@mineko17]

Does it make the force feedback a bit weaker?

[@samkovplay3622]

If you will use good lubricant and and correctly set the belt tensioner you will not see the difference.

[@mineko17]

thanks for replying

[@samkovplay3622]

No problem!

[@eftroines]

ffb still works ?

[@magnom3922]

can i send my wheel in for you to do it

[@richgr9775]

how can i 3d print this?

[@maciek6588]

Where i found this parts?

[@samkovplay3622]

Watch the link in the comments below.

[@torre9265]

А где взять такие детали?