CAT D6 vs KOMATSU D71

[@bigwig8927]

We need more videos like this then the likes of Cat and Finning wouldn't be able to brainwash the Cat fans in to accepting the same outdated crap with just a new sticker on the hood

[@DAVID-bv2gv]

Well You’re right about that 👍🏻🇬🇧

[@chrisfleming5109]

komatsu in the 90's bought Hanomag and since then have made huge steps forward probably because they can now draw on the hanomag engineering excellence, they had bulldozers running in the 1920's.

[@LordMuck]

I'm a massive fan of CAT dozers and equipment but I also like to show other operators what's currently out there and then it's down to personal preference, running costs etc. You've got to make your own choices at the end of the day.

[@InformedKiwi]

What a great presentation. Objective and to the point. Like it 😊

[@PedroRosas-ue5ey]

❤❤❤❤❤❤❤

[@daveshepherd5352]

It's nice to see someone for a change that obviously appreciates and likes CAT equipment but is experienced and open minded enough to look at other manufacturers. Other channels should take note !

[@numscull12345]

As someone who used to work for Komatsu, those things were pretty amazing to work on. really accessible and really nice in general.

[@craigross8777]

As a heavy diesel mechanic I've spent a lot of time in the forestry, on civil construction sites, various mine sites etc then i worked for a heavy hire company which had a large fleet which included Cat D4 - D11 and Komatsu D41 - D375 dozers. We found the Komatsu's to be more popular with our customers due to its pushing power and low centre of gravity. Both brands are good, but the komatsu's reliability and performance is second to none and I would highly recommend. As a mechanic the only thing I would say about dozers in general is they can be hard on the body and very difficult to work on with poor access to the transmission etc often having to remove very heavy seats or even whole cabs to gain access and a lot of the Komatsu models being Japanese were no exception, luckily with some of the later machines now you are able to tilt the cabs for access, a feature that john deere and liebherr adopted a long time ago. HST models are certainly becoming more efficient, reliable and popular. One thing to consider with dozers it is very important to look after and regularly service the rear end, final drives, bull gears etc as they are naturally prone to wear and failure. Really enjoying the content and commentary, keep up the good work mucker, cheers

[@Randyman4126]

Hey Craig,have you experienced any steering issues developing around the 16,000 hr mark on Komatsu?? I have not personally experienced that yet myself..That's what I have been told by numerous techs/mechanics..Also that it can be a bit of a nightmare to troubleshoot..I do prefer Komatsu tractors,so this is not a negative comment,rather a legit question..

[@craigross8777]

@@Randyman4126 Hi Randy, I haven't personally dealt with any steering issue's on the komatsus the hire company i worked for didn't usually do quite that amount of hours before they would on sell them. I do recall some years ago one of the other techs I used to work with having some issues with the transmission and steering on an old D155A-3 which had quite a unique setup withs lots electronics. From memory it needed a new wiring loom as it was plagued with too many intermittent issues. Cheers

[@not.likely]

Yes, Komatsu is on top of with this one. Operators visibility, significant cabin noise reduction, comfort, power and a bigger blade

[@paulcooper2897]

What I like is that you are comparing apples to apples ... not a 15 yr old clapped out beast to a brand new shiny machine. The visibility in the Komatsu is astounding. How was the headroom? It looked on camera like your head was above the rear window and into the roof? I, personally, would probably enjoy the Komatsu controls. I was never a fan of the thumb lever on the cat for blade control. It doesn't have a "natural" feel to point my thumb straight up like I'm hitchhiking while holding on to the joystick. Thanks for sharing 🇨🇦

[@LordMuck]

I think it was mainly camera angles as I had no problem with headroom with either machine

[@-2u2]

We purchased a ranch this year and need to develop roads to access some of the more remote locations. I was considering the D6, but after a day of demoing, I hated the visibility and just could not warm up to it. We have a D71 coming out for a demo next week. I'm really excited, especially after watching this video. Thanks for your non-biased content.

[@RealJohnWayne]

You really should try a new 750P/850P John Deere! "Nothing Runs Like A Deere" 🦌 🇺🇸

[@donstewart2872]

I also have to give the D71 cab top marks. Theres actually room for your lunch kit and your thermos doesn’t end up under the seat Comfort, huge improvement in visibility and extremely quiet. Even when you are walking past the Komatsu as it’s working, it’s extremely quiet.

[@rossgray3070]

Did a few days in a D 71 PXI a few mths ago and thought it was an awesome machine, loved the visibility and the hydrostatic drive, and room in the cab. I usually operate a D 7R2 LGP but have spent of time on everything from D 10T to D3, TD 6 to TD 30, but the D 71 would probably be the No 1 machine for me for doing what we mainly do which is residential subdivisions here in QLD. Been on dozers since I was 16 and 73 now so have a wee bit of experience on them.

[@butchpemberton6143]

I am an oldie..72 years old....We had a family owned sand and gravel company in Prescott, Az. from 1969 to 2003...the equipment shows in Las Vegas in late 60s early 70s we would marvel at the Chinese & Japanese there crawling up, in and out of all Caterpillar equipment photographing every conceivable inch..We owned Cat, Komatsu & Terex loaders, dozers, haul truck,backhoes...And Komatsu are great machines however, the used value market price was not the best and we did for the last 15 own primarily Cat. and had buy back program with them. Enjoyed your video..Thank YOU.

[@LordMuck]

Thank you for sharing 👍

[@jonnywhitelaw8224]

The company I work for has a lot of Komatsu machines and we actually purchased the first D71 that was sold in the US. We have all Komatsu dozers and backhoes so I’ve actually never ran any CAT units. But after seeing this I’m happy we only have Komatsu!

[@LordMuck]

CAT are fantastic machines, we ran them for years. The D71 however is just better but CAT will get something to counter it and so it goes on.

[@carltonholmes8061]

I am on a Komatsu D65 at the moment and I am impressed with it, even after operating CAT D6T’s. Look forward to operating the D71 Sooner or later.

[@dozerblade]

I'm retired from all this now for seven years, so it was nice to see how things are improving , I'd love to have go in the Komatsu.

[@LordMuck]

I'm sure you'd enjoy it. The exciting bit is to see what Cat come out with to regain the ground

[@pyroplim6967]

I started out on a D4 hand clutcher or the signal box as i called it due to the amount of levers.Then a cold winter on a D8 with a live chicken nesting in it no joke.Then farm contracting for years then a few yrs at a quarry on a Komatsu wa 470 shovel and a D6 C. The yrs rolled on and i went backwards ending up on a 41p Komatsu dozer or the dreaded 41 hand clutcher as know one wanted or said they could drive it.The worst dozer i have operated was a D6 R on narrow tracks the best was a D6 H with the tiller steer on wide tracks.We call dozers under the D6 size worm disturbers up this way. Great vid LM as per.

[@LordMuck]

Appreciate the info from someone with the skill of an experienced operator 👍

[@charleswooters]

I'm not an operator, but I'm a transportation worker, and I absolutely love the Komatsu they easier to load on a trailer greater view and they have a more precision handling. From my mechanic friends I hear they cheaper to work on and not a engineered nightmare. They do tell me that getting cat parts are easier.

[@Flatlander11]

Ran a Komatsu 71 in steep mountain terrain, absolutely loved it!

[@Kaegis]

I have a tiny Komatsu 7.5T excavator and it's been hell reliable, simple and easy to work on. Komatsu also typically have lower hydraulic pressures compared to Cat which adds to longevity.

[@adamhensel4877]

We have CAT and Komatsu at work. As a mech’s point of view dealer support is critical! They both break and getting parts or tech support to get them back up should be considered as well.

[@suresren]

There do seem to be alot more of Komatsu dozers appearing around the countryside on job sites,

[@mikeo.1593]

My company bought a 71 recently been running it for awhile now and it is a very well balance dozer and it will roll the hell outta some dirt I’d run it over a 6 any day

[@quinnhenshaw7293]

D61 is phenomenal as well. We have low ground pressure and standard and I love them. Auto control is on point esp. awesome for sub-grading gravel for long roads. Komatsu makes my favorite dozers. Even the 51 has loads of power. I’m glad this guy is pulling for Komatsu

[@phoenixlove76]

My company has all cat dozers and one komatsu, if you want the d61 you gotta show up early

[@reloadnorth7722]

I spent 40+ years operating equipment. Caterpillar went from the pinnacle of equipment to overpriced junk. I would like to see a comparison with either Cat or Komatsu vs the Dressta TD16N. Interesting dozer.

[@esaucl]

The off set intake and exhaust pipes are also really nice on the d71 it's such a simple design chance but it opens the front view up massively

[@neilcotten2816]

Good video, I think some brands take it for granted sometimes that they’re good and don’t put as much effort into keeping ahead of the competition. That cab on the komatsu looks a nice place to spend a long shift in with a great view of the surroundings

[@patgreenerides]

With 40+ years operating dozers of all makes and sizes, the majority of that being on the mighty Cat i feel well qualified to give an Operators opinion on the Komatsu D71 Pxi.. Tru plant had the first two in the country and my backside landed in the second, it was comfortable, quite, powerful and dripping in useful tech.. I was really Impressed on so many levels.. If I was in the market for a dozer of this size the D71 would be my choice followed by the new Liebherr ..

[@LordMuck]

Appreciate the insight 😉👍

[@davidstaddon5932]

Great Vid Kurt I have recently been on a job that had a new Komatsu D61px and a new Cat D5 so like for like in spec. both running on leica Gps for final trimming . My own opinion at the time was the Komatsu would out push the Cat and use less diesel . The Cat on the other hand would be faster at trimming . Even with the poorer vision it seemed to function better with the identical gps system .Myself and the other op were in agreement about this . Out of choice i would operate the komatsu . Keep up the good work and you will really enjoy using a tilty. There is a guy near me who has a tilty on a 4cx ,absolutely amazing piece of kit as he can drive, steer and change direction through the sticks as well as operating the backhoe and tilty.

[@dozerboy67]

I have run a lot of Cats and I’m a die hard patriot but, I also appreciate a good thing when I see it. I have noticed that there is better visibility and room as well as acoustics, they’re just not as loud, the Japanese engineers have been hard at work and have produced a fine machine! I still have a lot of pride in caterpillar, even though they aren’t altogether made here in the states anymore. I would like to run a 475, I have run all the dozers except the D11 but I hear that 475 is a beast!

[@douglasmayherjr.5733]

Pretty impressive comparison between the Komatsu and Cat. Cat is hard to beat but I think Komatsu has got them out engineered for the moment. There are people that will only ever run cat, they are missing something pretty nice. It would be interesting to see how they hold up over the years. Thanks for the video.

[@reubenmartin4314]

Thanks for the review. Was pricing out a Deere 850L , Komatsu 71 and waiting on Cat's D6 price. Keep up the good video content

[@kenmurray4232]

The difference in vision inside the cabs is astounding. I think you nailed it, that Cat will have to step up their game. Both are nice machines but I can see the benefits of the Komatsu.

[@roballan4944]

I worked for both cat and Komatsu each close to a decade. As for dozers. Hear me out. The Komatsu rarely have trans failures. But pretty tight for any repairs. The cat is just so much easier to repair.

[@benhoward4294]

They seem comparable mux. I suppose it comes down to price, servicing costs and dealer back up?

[@tripod6406]

Cracking video Muck, really impressed with that Komatsu, wouldn't mind driving that.

[@Woolzy603]

Ive been running a new Cat D4 for a year now and before i got it i did try out a PXi51. I totally agree Komatsu has it for cab space and sound. I also noticed on the inside was that a majority of everything was steel not plastic like Cat. But i think Cat has the comfort over Komatsu. Thats one reason why i picked the Cat. They also changed the hood so you can see better looking forward. But Komatsu definitely has the visibility in my eyes. I also liked how where the cab is located didnt think you got beat up as bad. Awesome video!!

[@henlewis7788]

Love the front end design on the Komatsu, it gave me an ease when operating that I would have never known until operating it myself and not using any extras just running it as manually as possible it is so smooth.

[@jackburgess9482]

I was a die hard Cat guy until I had the opportunity to operate the Komatsu D51 and D155, the visibility was second to none and that D155 was a beast, both were very smooth to operate and comfortable for the operator. I still like the Cats but I'm leaning more towards the Komatsu now. I'm really liking their excavators now as well. I was also impressed with the visibility on the 1650 Case dozer as well, it's pretty close to the Komatsu.

[@joshmiller7525]

I have run both of these, I really enjoy them both.

[@darreng745]

Reading the comments the Komatsu is ahead of th Cat where it counts and that is in the work rate, if the fuel costs are lower too then Cat are going to have to work hard with their next generation of machines to catch up and maybe steal a few ideas to improve that bloody awful frontal and rear visibility. Having the operator constantly craning their neck to one side to avoid that blind spot on their left is an atrocious piece of design work, how that one got past the final prototype stage is a mystery. The only thing I wonder on is the hydraulic fluid, how tolerant that is going to be to prolonged heat and will the service schedule need to be as rigorously adhered too as much as possible to prevent the fluid from breaking down? Other than that I would say on terms of operator comfort and the ability to use the dozer in the most efficient manner the Komatsu is way ahead and as you said it is a game changer.

[@andrewmear8704]

Thanks mucka I’ve always been interested in dozers great insight into their operation and a fantastic video. Your production skills with these videos never ceases to amaze fantastic well done and thanks for taking the time to set it all up and share with us

[@LordMuck]

Glad you enjoyed it

[@JuhaErkkila]

I know nothing about dozers but this review video in golden! Proper amount of explanation and fluently to the next topic! Well done Sir!

[@LordMuck]

Glad you enjoyed it!

[@Harikarikillboy]

I think as Americans we don’t see the truth in corporate bs sometimes. “Buy American” and “it’s made here” are common rally cries but Cat builds MOST of their machines overseas, and China especially builds numerous Cat models that are sold here, put an American flag sticker on it and call it American. It’s bs. John Deere does the same thing. Don’t believe me? Go on machine trader, pull up cat, then start looking thru the models, they’ll have a tag that shows where it’s made. I stopped the whole loyalty thing when I did the research. I’ll buy the best machine, I could give 2 %#

[@chippyjohn1]

Komatsu are far better. Here in Aus the boys love them, but cat is often cheaper due to the US owning Australia. Been eyeing off the D71PX/i for a while, would be my choice. Thanks for the Video mate.

[@LordMuck]

Glad you enjoyed it.

[@derwynyleen]

I work at a landfill that accepts industrial waste from drilling rigs. Im courious how the flotation is in mud.Belly pan dragging, stuck kind of mud. Currently using a D6t but would love to try a new Komatsu to see how they compare. One advantage the cat has is the ability to clean the tracks easily with the high drive.

[@LordMuck]

With the older D8's we'd simply drive them up on to a soil bank to dig out the tracks...

[@philipcross5332]

I've operated caterpillar dozers for many years and would say they are the best, but i operated a komatsu D61 a few years back and had it for 18 months trimming and pushing bulk materials and i was very impressed , comparing it to the cat D6N there both equally as good, I've not had the pleasure of operating the D71 yet but im guessing its a beast! Good vid mukka 👍🏻

[@dozerblade]

I started on a D6 in 1972 and the cab was so big you could have taken your family to work with you as well !

[@johnkillen4161]

Probably fair comment on the smaller dozers , different story when you get into the 8 to 11 size dozers. Suspended undercarriage high track every day for me , operator comfort and productivity on the blade are pretty good on the cats , the big kommagutsas can rip though, and wreck your back!

[@conmanumber1]

In last 25 years theres a few Cat owners who gone straight to Komatsu and Hitachi as operators love the operate by wire controls and comfort. Komatsu had always had a long relationship with Cummins engine Co wether using American or Japanese made Cummins engines. I believe this is Japanese.

[@murraycrichton2001]

Been on a 71 for the last few weeks, love the thing, great vison, what a step up in design. Also I think my manger has talked to the boss to go buy a 81. Fingers crossed.

[@spencerbrown4817]

I work at a komatsu dealer and never heard of an 81, is that made by a different manufacturer?

[@murraycrichton2001]

@@spencerbrown4817 to be honest, neither have I. I've only been in the game a short time. Think they don't either, probably referring to the next model up.

[@spencerbrown4817]

@murraycrichton2001 your next model up is a 4 way blade D85. The 71 is currently komatsu's biggest 6 way blade dozer and largest hydrostatic dozer

[@richardpower154]

We usually Run a D6m currently away for repair, Have a D61px on hire, The Komatsu is 10 x better. The only annoying thing Is when it keeps telling you not to overload and that you should be running in economy to save fuel

[@tklaasmeyer27]

You can turn that off in “configurations” tab!! 👍

[@jefflowrythor]

I borrowed a friends Kamatsu to dig a pond it was a beast.

[@eddieweigel9490]

My Uncle had a D355 A komatsu dozer its was a huge machine for the time he said that it would out rip and out push a D9 cat all day everyday he also had a komatsu track loader D155S another huge machine

[@bobpaterson1845]

Great video Kurt and camera work 👌 enjoyed the view seeing from the operators seat and as shown in the video the all round vision on the Komatsu was brilliant 👍

[@Jman771]

Been running equipment for about 23 yrs I’ve worked on farms, logging, civil and for the past 7yrs I’ve been matting and environmental engineering for utility companies. 4yrs ago my company bought Kamatsu excavator which I was immediately impressed with it will out lift out dig and out perform the cats n Deere excavators we have all day long and for being zero turn it is unbelievably sure footed. It will pick up 4 12”x16’x4’ timber mats weighing around 3300 lbs each and swing around fully stung out n not even begin to lift up which is pretty good for a 40,000lb machine the cats n hitachi machines of equal size wont handle half that load and stay planted and they are mostly normal configuration not zero turn machines. I’m not one to play favorites I love all equipment but it’s hard to overlook the performance

[@johnlydon533]

Great video. Enjoyed watching 👍🏼

[@retrogear]

There's a lake near Halls Creek in the Kimberley (Western Australia) called Lake Komaterpillar - because the dam that was built to make the lake was constructed by a Komatsu and a Caterpillar! Wonder if that was a Cat v Komatsu too?

[@eddieweigel9490]

My uncle years ago had a komatsu d155ax dozer he absolutely loved that machine he also had a Cat d9g and a d8 he always said the komatsu would out push and out rip both the Cat dozers

[@ctpusa1]

He wasnt utilizing the GPS, but that takes it to another level if you use the Komatsu Proactive Dozing Control. Its a really nice feature to help newer operators be productive and limit wear on the machine. Works much better than the autocarry ive ran in a CAT.

[@LordMuck]

Exactly - we made a decision to drive 'old school' to eliminate any 'interference' from the LCi to make a straight comparison

[@ctpusa1]

@@LordMuck that's cool. I loved the video. Appreciate all the effort to make it.

[@rodleypumpkins4174]

Hard choice for sure Cat has more models and motor options Down to specialty models. I’m an operator by trade and I’d prefer a cat I think they run better with less issues. Cat has the emissions figured out better. I’ve been in 3 different Komatsu dozers doing dozer things and because the DEF wasn’t topped off and each time below quarter tank they suck air bubbles and put it in limp mode and a tech has to come clear the code. Never has happened to me in a cat. Sometimes if it’s real cold the komatsus and Volvo equipment throw codes and sometimes limp mode because the def sensors are too cold. If I was buying a dozer I’d pick komatsu because the gps stuff is built in and ready. Cat you need to the domes and screen still.

[@LewisgardenservicesLtd]

Great footage on those working side by side👌 cheers

[@NickJones-n5y]

Every time I get out of my cat and run one of the deer’s and want to turn I pull it out of gear 30 or 40 times.Every dozer should be push button forward and reverse. That’s probably my favorite cab improvement from Cat.

[@andrewcampbell7702]

Very useful video, that box in the Cat cab on your left shoulder is a horrible design. I have worked a D6T and a D71 side by side on production work. The D71 comfortably will out push the Cat. The operator cab and visibility on the D71 are light years better than the Cat.

[@jacobdavis1752]

That D6 N is on a 5 H frame . Cat has gone from numbers to letters being the R and T are substantially bigger. We ran the Komatsu 61 exp starting in early 2000s and I was sold. The moldboard will tilt drastically further than the cat. I’m not a fan of high tracks but we have had with them for years. Over the years the Komatsu has held up with less services required. I still prefer a cat motor grader over the Komatsu. Cat has Mitsubishi power 😮sad. I feel Komatsu both in excavators and dozers durability , service, comfort, and power winner. I agree 100% on the controls. They have been clunky and strange since going from linkage. Thank you for the content.

[@LordMuck]

Thank you for the input and info 👍

[@gazof-the-north1980]

You could almost drive the Cat feet free (take your boots off and put them on the dash!). But you have to admit, the operators view out the front of the Komatsu was WAY better

[@donstewart2872]

Fuel consumption? It seems like our 71’s definitely burn less fuel than a D6 does. And the built in GPS is great. No masts to put on or pods to put up with wiring hanging all over as well. Cat has to step it up

[@spencerchurchyard7755]

I am all for modern technology today, as you said Cat is a household name in the earthmoving industry but you cannot rest on your laurels. They have to watch it otherwise they will get left behind with the likes of Komatsu, Daewoo etc. Another great video.

[@progbloke6655]

Some pretty snazzy shots and editing going on here. Very impressive.

[@darrylcote9759]

I run a d61 everyday and once in awhile a 51 on the same platfoarm as this beauty working with a sewer and earthworks company. Amazing machine and leading edge visibility its hard to go back to the competition.

[@TheGingerGenius78]

Excellent video Kurt ! Very interesting to see the new tech ! And good to see an unbiased operators review of machines ! It does seam CAT stick to some older school designs and tech but just make it look or sound more modern ! Keep up the good work !!

[@ziptiesnbiasplies]

How much production value ? all of it!!

[@LordMuck]

😎👌🏼

[@maplemanz]

I have put many hours on D61PX and think it's a great machine the 71 looks like a upsized D61.😊

[@alovero2]

Cummins and Komatsu have a Joint Venture called "IPA" where they manufacture engine blocks together. The D61 has an engine that is basically a 6.7 cummins block with a komatsu rotating assembly and cylinder head and Denso fuel system instead of Bosch. The 6D107 engine (6 cyl, 107mm bore). In the case of the D71, it gets the 9 liter engine out of the D65 (6D114 Engine). I've always heard that is actually a full Komatsu engine; 540 cubic inches (8.9L) but I dunno it looks pretty similar to a cummins L9. Even though the L9 is supposedly 543 ci (9.0L) displacement.

[@alovero2]

One more thing; komatsu does use a holset variable geometry turbo like a cummins. However the komatsu VGT is hydraulically actuated and the cummins version is electrically actuated. Also the aftertreatment system on the Komatsu is different. Would be interesting to compare the bore diameter and spacing of an L9 vs. 6D114. Quite possible that the block is the same but I dont know.

[@geedubb-q1u]

Cummins in Komatsu, and Mitsubishi in a CAT? Interesting. For golf course shapers the Komatsu would be a great option, mainly because of the view.

[@peterfarbrace3604]

Great video and a nice insight into both machines. Like you say for CAT to catch up now - modern technology and advancements would be interesting to see what they do next. Like the idea of the rads at the back.

[@marmotwisdom]

Have both of these machines at my worksite.I prefer the Komatsu over the cat as a operator.The techs who repair these machines prefer the Cat 100 percent.Cat is usually quicker and easier to repair.Worst Cat is the d7 hybrid.

[@jonkeighley2617]

Always wonder why they don’t put the operator cab right at the front. Think cat did it on a military machine once but that’s the only one I have seen.

[@belarus_black_smoke4753]

The UdSSR had also a dozer with the cab at the front

[@kevinrice7635]

Big K love it! Komatsu the best.

[@shaneolivier1650]

I love to watch the D11,this machine really amazes me and the power it has, learning what you say of the view you have of the Komatsu make's sence to me, thanks for your wisdom onto this 👍

[@mikeduin8311]

Really good set up video showing the differences between the two machines, the komatsu does sound a lot more quiet and loads of vision. Great camera shots M'lod 👌 Keep it up! Cheers, Mike

[@AircreteHarry]

Great information, Thanks!

[@bradmcmanis3231]

Great Video 👍👍👍 I'm A Field Service Heavy Equipment Mechanic For A Very Very Large Rental Company In The USA, before our buyout we where strictly cat Now where Komatsu,John deere,& The infamous HITACHI FROM Baby excavators to EX1200 & We have just recently bought some D61 & 71 All good here Keep up good Video 👍👍👍👍👍👍

[@Herbybandit]

I'm no operator but I do come from a farming family one thing I do notice is a comfortable quiet cabin leads to less driver fatigue which is another win for the Komatsu.

[@josephandoh6971]

I have used CAT D6 for long but when I sat in Kamastu D71 I was amazed and I stack to it. The power this machine deliver and the view angles makes it great. I thing that is a worry on CAT D6 for every operator is the reverse view. It's only on you right and that makes you neck tired because you looking in one direction

[@danpettifer8260]

Great video and love the comparisons

[@trevorpearson1832]

Interesting video as always. Thanks for showing us. 👍

[@roaringred]

Call me old fashioned but id rather have a D7G open station over these new machines. Ive ran the komatsu and i loved it compared to the cat but nothing compares to the old iron. If you think im crazy for that well then i guess i am! Hell im crazy enough to put my 1973 bucyrus eire 15H back to work!

[@giulianoparedes7901]

Great job with this video. Greetings from Asunción Paraguay 👏

[@AliMackMechanical]

Both look very capable machines I think if I was in the market for one I'd probably go Komatsu👍🔧

[@stumpymacgabhann]

Enjoyed your review. If I'm ever in the market for a dozer ...

[@kenrobinson9989]

Great video Mucker, well presented as always. Well done, that looks a handsome beast.

[@warringwarthog]

ultimately it comes down to which one your boss likes and can afford

[@LordMuck]

There's a lot of truth in that 😉

[@nathanbull7790]

Good old video that monsieur muck, I don't get enough time to be qualified on judging dozers, but your video is very informative!

[@dellhell8842]

Know next to nothing about dozers but an informative and enjoyable review.

[@martinhopkins4421]

Very nice my lord, any chance you could sent it my way ? My old D65--17 is getting a bit long in the tooth and bit of a nightmare. Got a couple of the new shape D61-24's on the firm they are good tools but after having a 65 I miss the power and size

[@Randyman4126]

Having operated Komatsu d61's,65's,68's lgp,85px/pxi,155's & Cat d5h,6h 7h/r,8n/r/t..I prefer the Komatsu tractors over Cat..I'm in no way trying to say anything negative regarding Cat as I'm fine with operating Cat..I just found Cats to be a little less balanced than the Komatsu tractors..The visibilty as you mentioned, I personally find better on Komatsu..Even with a 15 ft blade..I also have heard from numerous techs/mechanics that Komatsu at around the 16,000 hr mark can develop steering issues that can be a nightmare to troubleshoot There's other things,but again,it just comes down to operator preferences..Great video!!

[@jefftheaussie2225]

I didn’t know you could get a dozer without rippers. Could go back to the old tow behind set up but the cable arrangement would be a pain.

[@LordMuck]

They have the controls in place ready to be connected if fitted with a ripper

[@seanworkman431]

Vision and comfort are most important, esp. when your in a machine all day, it is sort of a shame that the design teams don't work together rather than in competition. If you got the best of both machines, it would be a doozie. Komatsu have been in the market for a while now and have excellent products and Cat are still riding on brand power, which is where Mercedes fell over. I bought a tin of paint the other day, 1 litre was half the price of half a litre of a brand that advertises extensively, using an oversized fluffy dog, does the same job.

[@PA3456]

Vision is key now, I work n earthworks on infrastructure projects and for some strange reason people love approaching big and yellow bits of kit. Great vid as always

[@EricTheOld]

After over 20 years on Cat equipment our company was sold to a company that prefers the cost of Komatsu to Cat so I wanted to see what I'm getting into and thanks mate. It's a major change from my faithful D7T wide track

[@georgedoorley5628]

spent a few days in a komatsu dozer as a child sitting up beside the driver , we were reclaiming land , i was only 10 ......but i can still remember it well ...........bulldozers have come a long way since the mid 70s ........was a full body workout to operate one back then .......not to mention the heat and the noise ......