Been using it in Elden Ring to play at 120fps and also in Emulation to turn fps capped games into more smoother experience.
@TheRealEclipse13 ай бұрын
Absolutely. I just end up going X3 because it's so good.
@appletuntrainer3 ай бұрын
Imma have to grab this. Specifically for Pokémon and the wild frame rates.
@juuzou47983 ай бұрын
how are you playing elden ring with frame gen the input delay is wild
@Intrinsic163 ай бұрын
Can you share your experince with zelda: tears of the Kingdom if u trued that heavy title?
@minhhieunguyen80963 ай бұрын
@@juuzou4798dont say shit you dont understand. If you can run the game at 60 fps then the input delay is the same.
@bradj92513 ай бұрын
This is an absolute 100% purchase for Modded Skyrim. I have 400+ mods currently with a heavy ENB using an RTX 3090. With heavy scenes, i average 50-70fps. But with Lossless Scaling, i can maintain a constant 100fps since my monitor is 100hz. Lossless Scaling is really amazing imo. My monitor is a 34" Ultrawide at 3440x1440p 100hz
@cajampa3 ай бұрын
How come your monitor is 100hz, is it overclocked somehow?
@TenkaichiMeister3 ай бұрын
@@cajampa There are a lot of 100 Hz monitors. Why would it be overclocked?
@cajampa3 ай бұрын
@@TenkaichiMeister Why not? and why does it matter? I have just not heard about many.
@TenkaichiMeister3 ай бұрын
@@cajampa I'm just saying that they exist on their own lol
@opt1ss3 ай бұрын
@@TenkaichiMeister I have never seen a 100hz monitor, so he does have a reason to think it was an over clock Edit: just searched it up on Amazon, and you can get one for $70-$90 which isn’t too bad tbh
@coolchews083 ай бұрын
Lock the frame rate to 30fps than use 2xLS for a 60hz monitor, see if the results are better, at any resolution
@rustycrown15413 ай бұрын
Can confirm this, I used to get awful results before locking, now I can play at constant 60 fps.
@coolchews083 ай бұрын
@@rustycrown1541 doesn’t work well on uhd graphics but I’m gona try on ryzen 7520u , waiting for the laptop to arrive from amazon
@Gamapaduarsaa3 ай бұрын
@@rustycrown1541 where do u lock the fps? from the ingame settings?
@rustycrown15413 ай бұрын
@@Gamapaduarsaa nvidia control panel
@zhila59582 ай бұрын
Will locking with RTSS work just fine? any insight is much appreciated
@iamstartower3 ай бұрын
i think you are using it wrong... lossless scaling works the best with a rock solid locked base fps. it is better used to fill those cicles that your hardware can't. let"s say your game does 50 or even 60 but with constant drops to 50 fps, then on a 60hz display you would lock to 30fps with RTSS and apply 2x LSFG for a smooth experience. in the same case but for a 144hz display, then you would lock your base fps to 48 and apply 3x LSFG. locking the base framerate to a half or a 3rd of the refresh of your display is what will give you the best result as locking yoir frames will also reduce input lag to a minimum basically you wil end with 2 frames of input lag, one introduced by RTSS and one by lossless scaling. the tool is amazing when used properly and its best quality is in the options it gives you to reach almost perfect results and eve better than those offered by fs3 and dlss as LS is universal and easy to use.
@juuzou47983 ай бұрын
couldnt have said it better
@todd923713 ай бұрын
I have a 75hz monitor. I have one game (Starfield) that usually is in the 50 fps range. Would you recommend locking the frames to "48" and use the 3x method to put it into a 144hz type setup (double the 75hz? or so)?
@juuzou47983 ай бұрын
@@todd92371 I recommend setting your monitor to 60hz and locking the frames to 30fps and using the 2x frame gen it'll be better but if you insist on using 75hz then lock the frames to 25fps and use the 3x frame gen method Note: locking it in both RTSS and in-game settings would make it smoother
@todd923713 ай бұрын
@@juuzou4798 Thanks so much!!!!
@zerocal763 ай бұрын
This is why I love the comment section. Someone sometimes is usually very knowledgeable, thank you my friend. Going to give my 1060 Max Q some new life, maybe even my Gt 540M 😮😅
@ReLo_FZR3 ай бұрын
You showcased the scalleing realy good , but the FG part was kinda messy since you didn't use any framerate cap ingame ( for 120 fps you need to cap the game to 40 for x3 and 60 for x2 )
@KaelumKrispr3 ай бұрын
Yeah was about to say this, and you need consistent frame timings, I would recommend using RTSS along with this ( it's free )
@AncientGameplays3 ай бұрын
You really don't, it generally caps to your framerate, at least on version 2.9
@ReLo_FZR3 ай бұрын
@@AncientGameplays LS is capped to yre refresh rate indeed , but the game still needs to run at 1/2 framerate for x2 Check vex video , he did fg the right way but he didn't use scaleing at all , and a combination of both is the best especialy on 4k displays or for anyone who struggles on theyr native resolution
@KaelumKrispr3 ай бұрын
@@AncientGameplays he's saying you need to cap the game to a multiple of your frame rate, not just cap your frame rate which that does. This is because the frame generation needs a stable frame timings to make it not feel janky or stuttery. I'd recommend RTSS and cap it at half your refresh rate for the 2X mode, as RTSS has really good frame timings compared to over caps :)
@KaelumKrispr3 ай бұрын
@@ReLo_FZR this ^
@OverseerPC-Hardware3 ай бұрын
This is definitely a must buy for games with no or poor upscaling i.e. Helldivers 2 Thanks for the test, Bryan!
@ChiekoGamers3 ай бұрын
thanks mate. I really enjoy watching your videos from Economics Analysis to Tutorials. helped me a lot
@hinchlikescake75923 ай бұрын
Played Ghost of Tsushima at 240fps with FG 3x (80fps base) and it was an amazing experience. A wonderful tool for gaming and a must have for PC.
@Iamdudeman123 ай бұрын
If you have a Nvidia card why not use the native dlss and fsr? If you don't i understand
@omegaPhix3 ай бұрын
@@Iamdudeman12 There's no support for that in Ghost of Tsushima
@adi62933 ай бұрын
@@omegaPhixThey added FSR 3.1 2 days ago and you can use the FG with DLSS now
@RurouTube3 ай бұрын
@@omegaPhix Yes there is. It has basically every upscaling option and also they decoupled frame generation, thus you can even use FG with XeSS. It can't give you 3X FPS boost from the FG alone, but combined with a more aggressive upscaling setting (like balanced or performance) it should be able to and technically it should look better than the upscaling + FG from LS. If he already use DLSS/FSR/XeSS and only use FG from LS (which is unlikely since that is a perfect 3X frame rate scaling and doing FG cost you GPU times), then, yes, LS FG can give you X3 multiplier, but the more you insert generated frames the more latency you will get. So honestly I don't know why someone would use LS for a game that already have great native support for upscaling and FG, but everyone can do whatever they want with their games.
@hinchlikescake75923 ай бұрын
@@Iamdudeman12 DLSS looks fairly soft in 1440P and lacks detail; without some major sharpening. And as such I try avoid it if at all possible, for single player games. I use DLAA and native resolution for the cleanest image. Adding FG on top of a upscaled and soft image (with DLSS, FSR etc) isn't exactly a great experience. Tried AMD's FG and it doesn't give as high fps and it actually gives me more latency verses LSFG 3x. LS just makes the game much smoother with less latency, and no tearing since I'm hitting my monitors refresh rate.
@ChrisKadaver3 ай бұрын
Haswell i7, RX 580 8GB and Inspectre + lossless scaling and a gamepad = win?
@jamie_M7213 ай бұрын
What is inspectre?
@user-rs7tv5lq5v3 ай бұрын
@@jamie_M721 techyescity has vids on it, disableing it gives a little increase on older intel cpus
@Hairybarryy3 ай бұрын
Yes definite win
@Hairybarryy3 ай бұрын
@@jamie_M721It's a program that disables the specter/meltdown patch on older cpus. It's helps with performance as the patch slows down the cpu a bit
@Voidsworn3 ай бұрын
@@jamie_M721 It disables the Spectre mitigations that were implemented to protect PCs from Spectre, but causes loss of performance. So, disable mitigations = performance regained.
@golimonkey3 ай бұрын
Tried it, it works. Then I tried my monitors native 1080p to 4k scaling and it looks better... Integer scaling is not sharp and has glitches (1080p to 4k should integerscale without problems)...
@cooleyfc3 ай бұрын
how to scale 4k? in game set to 4k, and in lossles scaling set to 1080p?
@golimonkey3 ай бұрын
@@cooleyfc other way around. Set game to windowed 1080p and. Desktop resolution to 4k.
@cooleyfc3 ай бұрын
@@golimonkey i just try what you did, use scaling type Ls1, scaling mode fullscreen, frame generation off, the game look good i got stable 60fps but the game not smooth feel terible not stuter/lag, do you know why? Or i should turn on frame generation?
@golimonkey3 ай бұрын
@@cooleyfc It only got worse with framegen for me. I really dont know, use in game options, this doesnt do anything special when scaling, it still looks as bad as anything else.
@dame6669993 ай бұрын
Don’t think it was mentioned in the video that you need to set the game display to windowed or borderless for upscale to work properly. I have only learned of this through other vids. Correct me if I’m wrong and I do apologise if I’m wrong. Make the game borderless go back to lossless and press upscale button you then get 5 seconds (you need to enable draw fps in lossless settings as this reads and shows the real fps achieved it will come up behind any fps monitor software that is running as rivatuner does not show the true fps when using lossless upscale ) to click on the game or video you have running and it upscales. I think Brian did it but not explain.
@benclimo4613 ай бұрын
Yep exactly right. You should also add a frame cap too especially if your on nvidia as gsync doesn't work, Amd you should only enable this if your reaching the max fps of your monitor.
@omenfarts23533 ай бұрын
Do you have to make the game permanently boarderless to draw fps or can you make it borderless then full screen it after a bit of time and still draw fps?
@RizkyAshary2 ай бұрын
1. Set your game to borderless fullscreen, If this option isn't available, use windowed mode. Exclusive fullscreen won't work. 2. Adjust the scaling settings, Set "Scaling Mode" to "Auto" and "Scaling Type" to "Off" to play at native resolution. 3. Cap your in-game FPS, For DXGI (default), cap it to half your monitor's refresh rate. For WGC and GDI, lock it to a stable framerate. 4. Disable overlays, Overlays from game launchers or GPU software can interfere with Lossless Scaling. 5. Optimize performance, If you're aiming for a specific framerate, consider using the upscaling feature or lowering in-game settings.
@aouameurbazoka78022 ай бұрын
Please give the lowest input lag settings with latency added in ms thank you :)
@jayr343Ай бұрын
Is it okay if I have Scaling Mode: Custom / Scale Factor: 1.5 Scaling Type: LS1 Frame Generation: LSFG 2.3 x2 PERFORMANCE at the same time? and if the game I am usin the program on have native support for AMD FSR which one should I use? or do I use both?
@RizkyAsharyАй бұрын
@@jayr343 i never use FSR in game settings, LSFG better ,
@jayr343Ай бұрын
@@RizkyAshary I see what about the upscale in the game settings? Do you use FSR Native AA or disable it and just use Loseless Scaling
@RizkyAsharyАй бұрын
@@jayr343 yeah i never use FSR from game, Only use lossless scaling,
@benclimo4613 ай бұрын
So first of all there's a few KEY issues with this video and it's obvious that he didn't follow any type of guide. As he's using an Nvidia GPU Gsync does not work it's an nvidia issue not a program issue which means you have to absolutely have to use a frame cap, with AMD freesync does work, so you only need to enable a frame cap if your going over the fps of your monitor. If you don't do this then you get major issues with frame time fluctuating as he experianced here. The gtx1080 is a relatively weak card by todays standard so it is recommended to use Performance mode which can drastically help with FPS. Why is it that any niche product being reviewed by big youtubers are just lazy and don't bother researching anything then saying it's got issues.
@hinchlikescake75923 ай бұрын
Yep, they even state you need to lock fps. In multiples to meet your displays refresh rate. Reflex or Antilag is a must too.
@benclimo4613 ай бұрын
@@hinchlikescake7592 Exactly, once setup it works brilliantly. They should probably have some information in the program itself about these details so that you don't need to look up anything which I think will massively help lots of people.
@jamescampbell84823 ай бұрын
I love this program. Downloaded it before it was widely known and use it on my 3 GB GTX 1060 works for emulation, PC gaming, movies, so any local video files, works on KZbin. It is amazing especially if you have a high refresh rate monitor
@59.9fps3 ай бұрын
For LSFG to work smoothly, it requires that the base fps is locked, so to get 60 fps from 2x FG, the game should maintain 30 fps throughout
@Rain120 күн бұрын
It works pretty good, if you don't mind a little bit of extra input delay you can really get a solid amount of extra FPS with the frame generation option
@rajikkumastah4523 ай бұрын
This is a great application, when Elden ring first came out my graphic card at the moment is GTX960 2GB, I cannot run it even on 30fps. After using this I can play it at fullscreen and 30fps although the resolution isn't the best.But hey at least I wont be missing out
@bfhandsomeface4093 ай бұрын
Been trying this and for the cheap price it seems to work good so far. Its a good option when FSR is not in a game. It cost around 10% of the base framerate to use the frame generation. I believe you are suppose to cap your frames when using Frame gen.
@jacksonbtb5713 ай бұрын
I'm very excited about stuff like this. Upscaling and frame gen used to be really rare and not accessible for most people. Hearing about new options like this means we can have more options for budget cards in the future
@stilb252 ай бұрын
The great thing about this tool is because it's works for every game I try, the performance gain and the increased quality on low resolution of graphic is noticeable without extra files and the complexity to put each files
@ReallyNotTrixYTАй бұрын
As many has pointed out, it's better to lock your frame rate to half your display's refresh rate or near enough what the game can stably maintain to get better input delay. I also noticed that you aren't using performance mode. Locked FPS, using the new G-sync option and Performance mode is the best way to lower input delay. Also in fast moving games, you're actually less likely to notice the artifacts since you're not focusing on any one element like you do with slower paced ones
@Ausanan3 ай бұрын
My favourite aspect of Lossless Scaling, is that the frame generation feature works with emulators. I was playing Conker Live & Reloaded the other day, using the 60fps patch plus FG. So I was able to get up to 120fps.
@Dregomz023 ай бұрын
Demon's souls at 120 fps. Parasite Eve at 60 or 90fps.
@xosece3 ай бұрын
it even works on 2D games. 2D games look a lot smoother, i.e. gameboy, SNES, Megadrive, etc, games, which usually had slow animations... It's night and day , if you use 3X FG. And it even works on videos. It works on everything actually, even youtube videos
@AmperahGaming3 ай бұрын
@@Dregomz02Elden ring at 165hz feels so much better :)
@sbrader973 ай бұрын
I use it for videos too since I'm only using a monitor not a tv with the frame interpolation built in its probably not quite as good of a result as svp made specifically for video but it universally supports most videos/software except from drm protected content is a black screen obviously because it thinks your trying to record it since it's capturing the screen to do the fsr sharpening and frame gen. The built in fsr though its quite nice for my monitor because benq didn't put a sharpening setting on this model for some reason
@timestamppatrol3 ай бұрын
I bought this software for 1 dollar about a year ago, and love it so much. I even use it for watching anime, its work.
@exhaustor59833 ай бұрын
When I try it with crounchy i get black screen. How did you make it work?
@timestamppatrol3 ай бұрын
@@exhaustor5983 i believe crounchy got some kinda drm right, try disable hardware accelaration. Same case just like netflix when I was trying to stream on discord, it just got black but after disabling HW acc its work.
@timestamppatrol3 ай бұрын
@@exhaustor5983 crounchy got drm u need to disabling HW accel on your browser
@timestamppatrol3 ай бұрын
@@exhaustor5983 why my comment always got deleted??? Disable HW accelaration on your browser, crunch had DRM.
@lillightstruck53783 ай бұрын
@@exhaustor5983 need to use windowed mode
@Premises1873 ай бұрын
Recently, I purchased this. For my 7800X3D 4090 PC, Frame Generation works great for ArmA 3, which frequently drops to around 50 FPS in multiplayer because the frame rate is tied to server speeds. Sadly, LLS framegen does not work well on my 3050Ti laptop. It seems that when the game is GPU-limited, LLS needs some GPU headroom to do its thing and causes worse results than running the game without frame generation.
@JohnnyBoy-sy8jt3 ай бұрын
Correct, it needs about 15-20% overhead.
@trappist953 ай бұрын
the reason there is artifacting is because lossless scaling only has access to the frames your display outputs and does not inject dlls, it does not have access to the actual game. The FSR 3 frame generation works with no UI artifacting because it is in the games files, so FSR3 can tell the game what to generate frames for.
@Paulie8K3 ай бұрын
I bought it for the launch of the 3X FG option and it has been great. I've tested it on my laptop, desktop and ROG Ally with success. I do agree that results will vary per game but there are so many options to tweak the experience and to get it dialed in per game once you get used to the settings.
@joelshrem88363 ай бұрын
Dlss enabler is the best frame gen program/mod for dlss3 games with older gpus, also been enjoying lsfg for videos, keep up the great work as always, been enjoying that tech yes city bang for buck bangers for many years now!
@_RedsTech_3 ай бұрын
I really like the 2x frame gen for games that don't natively support frame generation or upscaling and also have an in-game frame cap. The Crew 2 is a great example of that. I've been on the lookout for mods to fix the 60 FPS frame cap for a while now. Now I can finally play at 120 FPS! Don't really notice any input delay with antilag enabled on my RX 5700. (3x doesn't work at all for it though lol)
@kanethomo24833 ай бұрын
Wish my dad played tcg with me growing up! Different times tho I guess. He supported the cost of packs of cards so can’t complain that much 😂 I got 2 packs every Friday if I was good, did my jobs and went to school ahhhh simpler times
@junethefirst3 ай бұрын
You have to take into account that LS framegen does not go over your monitor hertz limit anymore, ie. if you have a 120Hz monitor you'll get the best result with the game capped at 60FPS for X2 or 40FPS for X3. If your game is already rendering enough frames to max your display frequency then LS does not do anything when it comes to framegen.
@benclimo4613 ай бұрын
But there's no point in running over the fps of your hz of your monitor
@junethefirst3 ай бұрын
@@benclimo461 not with this application, no. I just saw in some parts that the LS framegen counter showed 60/60, that means the game was already rendering 60 fps and the application was just re-spitting them out because the monitor is 60Hz (or was set to 60Hz manually).
@benclimo4613 ай бұрын
@@junethefirst If it saying 60/60 then either the monitor has a max of 60hz or LS isn't working correctly.
@legen_dary42Ай бұрын
ONLY for games that do not offer DLSS or any other frame gen or have the frame rate tied to the FPS, a la Fallout 3. Awesome for those, but you will get some weirdness with 3 or 4x frame gen. Also great for scaling games that don't play in a full screen window like Moonring when you don't have other options available.
@Intrinsic163 ай бұрын
Thanks for the review. I really wanted this software just for the frame gen as i am already running most of my games with DLSS so if fg here is not good, i better stuck to mods for FG.
@dianaalyssa87263 ай бұрын
🦆 is adorable. This sounds look a neat testing tool. I remember playing Pokemon TCG offline, great GBA game too. Those cards do look a bit not as sharp/bold text as they should be or something, in a live game that could be annoying. Could see this LS1 for older graphics cards perhaps. I use FSR if I have to.
@christophermullins71633 ай бұрын
I spent the full $7 on it and its awesome. I definitely want lossless to get the full $$. It works great for the universality. Better than amds afmf by a landslide.
@vexelghost3 ай бұрын
Have you tried AMD's Adrenaline intelligent adviser? I might have the name wrong but I toggled it and was getting 120 fps on the performance setting on Elden Ring. I've since put it on the global setting for 60 fps but it surprised me for a moment.
@niezzayt38093 ай бұрын
for "Frame Generation" First you need to lock the FPS from Nvidia's built-in cPanel and make it hard limit at 30 FPS and the from here you can go all the way up to 90 FPS
@Not_ur_Buddy3 ай бұрын
Not necessarily it have to be 30. I have a GTX 1660ti I lock Alan Wake 2 @45 & apply LSFG @2x. In forest region I get constant 45/90.
@arkgaharandan58813 ай бұрын
lossless scaling is terrible, i used the 1060 6gb that the steam page recommends, on heavily modded new vegas at 30 fps, losless scaling set gpu usage at 99% and it goes under 30 fps at 28 fps, at fallout 3 without graphics mods i get 58 fps in doors and with lossless scaling it goes at 60 but the crosshair breaks and becomes fuzzy, at far cry 5 i get 60 fps and by turning lossless scaling on either makes no difference or goes to 58 fps but gpu usage reaches 85% instead of 74% and if i lock the fps at 30 and turn on lossless scaling it says 60, but it feels more like 40-45 fps due to lag. Terrible program, fake frames are a joke and a scam.
@gamerspirit8918Күн бұрын
Try locking your frame before frame generation, that will make a huge difference
@VnowN2 ай бұрын
frame gen's input delay is negligible the only reason it feels so bad is because typically when your fps is higher your input latency is lower however with frame gen the "fps" is higher without the input latency getting lower making it feel much worse then it actually is
@xtremezone9873 ай бұрын
I've heard some people call this a scam. Must've been a case where they tried it in their favorite game. Didn't work too well but didn't try any other game before making a conclusion. Ya like you said it's hit or miss. For campaign games like Alan Wake 2 it works well. For competitive esports probably not really.
@Jon-s8y3 ай бұрын
love the Tshirt! (GR fan also :)
@WinWinTips5528 күн бұрын
turn off motion blur effect reduce more graphical artifact like screen flickering and ghosting.
@mikenyagawa39293 ай бұрын
It actually works really well in NEW WORLD at 4K!!
@guillermosanchez12242 ай бұрын
it needs atleast 20-40% gpu usage space in order for it to work properly..
@michaelthompson97983 ай бұрын
Any application software that gives gamers more options for fps in games is worth having imo 🥰💪😇🥳. Good on this creator for creating a great application for such a good price 🤤😁😇👍
@Tailslol3 ай бұрын
I feel like I did this for years when i connected my PC to my 3d TV and enabled 120hz motion smoothing.
@kasmidjanАй бұрын
Here we are We get to the Era of "Downloading FPS"
@sirocbit8041Ай бұрын
Man, to achieve the best results you should cap the game at 30fps and then turn on framegen.
@3500onnacoat3 ай бұрын
I do have a question, when I use LSFG 2.1 and 3.1 I have this issue where it's almost like the most delayed of version of motion blur ever and I don't have VRR enabled on my monitor nor' my AMD Radeon settings. But I cannot NOT use LSFG because that's practically the entire point of me buying the application. So if any of you great people can help me it'll be greatly appreciated. (P.S I have a 170 Hertz monitor and I use LSFG 2.1 and I capped my FPS in RTSS to 85 and my pain is still constant.)
@Marco-cl9pb3 ай бұрын
It's a must on Elden Ring (capped at 60fps)
@chriswright80743 ай бұрын
It's not if you ain't hitting the cap then upgrade
@Marco-cl9pb3 ай бұрын
@@chriswright8074 it is capped at 60fps if you don't want to install mods...
@alexp.84153 ай бұрын
@@chriswright8074??? That's not it. Elden Ring has a 60FPS cap, and FrameGen works great at playing beyond that.
@Dregomz023 ай бұрын
True been using it for past few days and it's great
@darthrevan57073 ай бұрын
@@chriswright8074not everyone has money for a crazy pc mate and our hardware even if it older isn’t that bad just because devs are to lazy to optimize
@TheErlend873 ай бұрын
3x framegen is messy. Dont use more than 2x, its plenty
@THE_GAMER_EFEX3 ай бұрын
It's 100% worth it I can play native 4k 165hz in most of my games now with my i5-7400 and 2060s
@darrenjk54383 ай бұрын
Made Helldivers 2 experience much better. One of the best 7 euros i've ever spent on software
@Ace.203 ай бұрын
VRR is a legacy feature and doesn't work. It literally says it when you hover on that option.
@freedomearthmoon13 ай бұрын
If 2 of the 3 games you tested didn't benefit from frame generation, it's 66% useless.
@aquaprofile3 ай бұрын
It isn’t useless. Absolute game changer especially for emulated games.
@aberkae3 ай бұрын
Amazing video. Does it have native anti aliasing solutions like dlaa and native aa fsr or their own native anti aliasing vs Temporal anti aliasing?
@benclimo4613 ай бұрын
No but you can use reshade to use AA and TAA. It uses FSR1 or LS1 which are very similar things
@memedzaddy3 ай бұрын
This software is best for games where you don't have enough fps or where Upscaling with fsr or dlss is poorly implemented and the game looks worse than Native AA when using FSR and DLSS, I used it with Horizon Forbidden West since upscaling options in that game all look bad compared to native TAA so Lossless scaling lets me run the game at default 1440p capped at 30fps on my 2080 using the x2 option and the game looks amazing and runs smooth.
@anrypettit31123 ай бұрын
This is like the 3rd video where there's a couple of flaws explaining how it works The first thing you need to do is cap the fps to half of your monitor hz if you're goint to use X2 and a third if X3 Lets say you want to generate "120" fps Cap the fps to half of your monitor fps (60fps) and then use the software Dont just go and activate the program The inconcistent fps will cause way more defects
@mermaidgirl007522 күн бұрын
I got this on steam and used it but I didn’t do it properly and I couldn’t manage to make it work, it always halved my fps, should I buy it again or no
@Venlorz3 ай бұрын
I know many says it doesn't trigger any anti-cheat... but still hope that it doesn't in future games xD
@surfx48043 ай бұрын
Good with laptop eGPU setups Especially if use laptop screen as you can run LS on the iGPU while game runs on eGPU. I use it with me zenbook + GPD-G1 and love it as I can play things like Cyberpunk and Starfield that otherwise are unplayable.
@benclimo4613 ай бұрын
Depending on the Igpu this won't really work well at all as it might be too performance heavy.
@surfx48043 ай бұрын
@@benclimo461 Everything always depends. Works good on my 12500H, but you can use performance modes too to drop it down and the scaling helps with thunderbolt bandwidth limitations, lower resolutions and fps to/from the eGPU. Like most things you have to trial&error with setup and each game.
@andrewsanchez257332 ай бұрын
Do you have to keep lossless running in order to keep the upscale
@rzkrdn86503 ай бұрын
The upscaling is straight up bad for me. i only use the framegen
@Tanzu153 ай бұрын
Bought it a week ago. It’s great.
@gamingfromjohnwayneАй бұрын
Doesn't work like it says got 4070and just makes it worse most of the time just because it's says 130 fps it was not on mine.this to was crap.unless I have a setting wrong.
@adi62933 ай бұрын
That's why I recommend 66fps before enabling any GF technology
@TheRealEclipse13 ай бұрын
This is great for emulation. Even better than unlocking fps is some cases.
@todd9237121 күн бұрын
Want to love this software. But, I get micro-stutters in everything with it.
@adsr14Ай бұрын
Use base cases lol 2:30 mark. Great video though
@JoonKimDMD19 күн бұрын
Would it work for FF8 that is only 30fps turn it into 60fps?
@djklink200093 ай бұрын
My RTX 3050 might need this?
@MaestroLYALYAАй бұрын
no good for online game Very unplayable, the picture lags unstably
@unnamed7153 ай бұрын
Why are you testing it on games that already have built in upscaling? Why not try it on some unoptimized titles that don't have any at all? I'm gonna try this on Gas Station Simulator (don't judge 😅) because that game is an unoptimized mess and stutters like crazy!
@devonmarr98723 ай бұрын
40fps gen to 80 or 120 is the sweet spot imo.
@aalona32 ай бұрын
If i have 180hz what do i cap mine to
@iamgats92163 ай бұрын
Is it safe to use on online games tho? Like, can we get banned by using it?
@shortshins3 ай бұрын
Lossless scaling is an absolute game changer it's given my 3080 a couple more years of life if not more.
@nexuhs.3 ай бұрын
Bro a 3080 is a beast even without any frame generation or scaling
@basshead.3 ай бұрын
@@nexuhs. Yeah, for the ultimate 1080p gaming experience lol.
@nexuhs.3 ай бұрын
@@basshead. Even quad hd, I've been using a laptop 3060 at quad hd, imagine a full sized 3080
@basshead.3 ай бұрын
@@nexuhs. it runs out of vram at 1440p
@nexuhs.3 ай бұрын
@@basshead. Wth fr? I've never had those issues on my part on the 3060
@adrienmeesemaecker20543 ай бұрын
It would work to use loseless or trixx and FSR3 together ?
@Basserino843 ай бұрын
Now..... will the tool run on linux?
@aouameurbazoka78022 ай бұрын
How much latency added for ls fg vs fsr 3.0 in ms same game and situation i hope you test it with different mode like ls fg 1.1 and dxgi wgc gdi which lowlest latency ms thank you :)
@xyz12three9 күн бұрын
great little tool
@mostadaiki74583 ай бұрын
I hope to develop and add a technology similar to dlss or fsr based on Ai
@GamingRulez-pm8om3 ай бұрын
Can u try the artic 36 cooler? do the ryzen 7 5700x if u can
@PugFrenchieChronicles3 ай бұрын
Doesn’t amd have this for their cards Like fluid motion or something like that
@TenkaichiMeister3 ай бұрын
Yeah but it's literally worse than LSFG
@PratikGhone3 ай бұрын
Will this be useful for someone who plays on a 1080p 144hz monitor on an old pc with i5 4690K + 1060 6GB?
@lillightstruck53783 ай бұрын
yes, especially when u put the graphic effects on low ingame. dont forget to use windowed mode aswell, otherwise it wont work
@PratikGhone3 ай бұрын
@@lillightstruck5378I enjoy esport games and love running them at higher settings with 100+fps on 1080p
@marcuzhightechfreaks2 ай бұрын
Ive tried it and FG doesnt not work! lmao and if it does work , then its hella choppy and it feels even worser than native. really bad
@hugoqsd34452 ай бұрын
Nah for real I thought it was me only it's a miracle at all native runs much better imo
@zwerne423 ай бұрын
4mb? that could take a while
@slapnut8923 ай бұрын
VRR is not supported.
@iknowyounot883 ай бұрын
The frame generation isn't worth it more often than not. There's a massive fps drop and if you're lucky might get +10-20 fps compared to what you natively get. On several titles I even got less overall fps. The minimal gain in total frames isn't worth the added latency and artifacts. If you can manage 60 real frames with it, then i can see it being beneficial, but it seems like a novelty in most real world applications.
@TenkaichiMeister3 ай бұрын
That's not the frame gen's fault but your system's (or the game's in some cases)
@iknowyounot883 ай бұрын
@@TenkaichiMeisterit's a culmination of all three. The target for demanding games is 60fps for most people. Unless you can make that up by significantly drop the game settings, keeping that target is impossible. But that's unachievable in many cases. An optimized 60 will be all around better than 30/60-90. My point is that the people who are looking to benefit from FG have hardware like me, and end up with scenarios similar to mine. If you have a newer and powerful card you're less inclined to need FG because you get many native frames or you have FG natively built in. The application is a bit niche.
@TenkaichiMeister3 ай бұрын
@@iknowyounot88 You say "Hardware like me" and never mention your hardware. What's important to know about LS is that it needs some GPU resources itself. Like with performance mode at least 10% GPU usage. If you can get your GPU to not fully max out and then add LS on top then your FPS won't decrease and you will benefit from Frame Gen as well A good usecase for LS is emulators because they aren't as taxing on most systems
@benclimo4613 ай бұрын
@@iknowyounot88 What hardware have you got? LS most of the time takes around 10-15% of your native frames but then doubles that, X3 takes slightly more performance but then tripples that fps.
@iknowyounot883 ай бұрын
@@benclimo461 2080 super and 3900x. For example, on The Finals I get 60-90 fps until I enable LS then it dips to 30-40. My problem with LS is it's taking way more than 10-15% and it's like that in other games too.
@crisppzanuff43983 ай бұрын
VRR doesnt work btw if u over the mouse over it u get a text box
@benclimo4613 ай бұрын
It does with freesync but still need to cap it if your fps goes over the hz of your monitor.
@crisppzanuff28683 ай бұрын
It doesn't, it literally says that it doesn't work anymore when u over it@@benclimo461
@crisppzanuff43983 ай бұрын
@@benclimo461 it doesnt it even says if u put the mouse cursor over it xD option got deactivated
@dano52383 ай бұрын
Would this help if someone is using an i7 12th gen, LG C2 4K display, and a 3090 Ti?
@lillightstruck53783 ай бұрын
when your display has more than 60hz, or you can only reach like 30 fps, yes
@ranotasnyder80952 ай бұрын
Does this work with any gpu?
@GameplayBeats7772 ай бұрын
Yes bro it works for all Gpu out there
@cinaplax13 ай бұрын
Can i use this on intel hd 5500.
@jacintherczig4455Ай бұрын
This program not working, this dont give more Fps 🫤 5 $ in the trash
@shiro214okane3 ай бұрын
its smooth but the lag/delay.
@arifnurabidin25093 ай бұрын
Can loseless scaling work with capped fps???
@lillightstruck53783 ай бұрын
ye
@Sm00k23 күн бұрын
Except for Linux, eh?
@chrisrosenkreuz233 ай бұрын
4:20 I kept trying to close the Epic Notifications LOL