Losi DBXLe 2.0 DGI Wheel extenders install

[@parrishhunter1843]

Great vid,2.0 is sitting like a beast!!

[@rcpimp6419]

Love the truck , stay tuned for motor upgrade

[@giopirmisashvili5514]

Thank you

[@Blueknight1960]

I just got the integy wheel extenders, the end cap/ lug nut bottoms out before tightening to the wheel. So I'll either have to put a lock washer behind it or grind down the fake lug nuts and used the stock lug nuts that came it. The tires and wheels are the pro-line badlands mx43's.

[@rcpimp6419]

Everything i ever tried by Integy was bad . I suggest DGI wheel extenders

[@Blueknight1960]

@@rcpimp6419 Actually everything I've tried so far from integy (except wheel nuts) have been good, no problems at all. I had a front cvd pin come loose ( stopped the wheel going about 35 mph ) yesterday which in turn caused the pin for the hub to break. It is stuck and can't get the cvd out the hub. So new ones will be ordered and they will be the 2" DGI hub extenders.

[@josephsrc]

Where did you gets the hubs extensions?

[@masacremisantropia5910]

Buenos dias! Tengo un Losi dbxl-e 2.0 fox Y me gustaría saber que es lo más potente que se le puede poner... Tanto Motor, Variador y Baterías sin necesidad de modificar nada. Gracias!

[@rcpimp6419]

www.mgm-controllers.com/brushless-esc-motor-combo-for-losi-5ive-t

[@masacremisantropia5910]

@@rcpimp6419 Sirbe todo eso para el dbxl-e 2.0?

[@rcpimp6419]

@@masacremisantropia5910 yes it is

[@jamesshippIII]

What was that you placed behind the extender? I have dgi extenders but I did not get lug nuts with them. Every lug nut I have will not tighten down the wheel. Do I have to buy dgi lug nuts and also whatever that was that you placed behind the extender. Not the O-ring but that other piece you put on?

[@rcpimp6419]

there is nothing behind the extender. Just the rubber ring that holds the pin in place

[@jamesshippIII]

@@rcpimp6419 what would I need to do to get the wheel nut to tighten all the way up onto the wheel...any ideas. Buy a sgi nut cap or something other? 😊 thanks.

[@rcpimp6419]

@@jamesshippIII I would get DGI lug nuts - look great , work great

[@cwatson42785]

Should I get the 1" or 2" extenders? For my dbxle? And have they bent or broken? I have a dbxl converted to a E and it has all the aluminum upgrades and almost weighs 50 lbs so I'm just not sure how the 2" would handle all the weight? Any advice? Thanks!

[@rcpimp6419]

they did not bend even after huge jumps. go for 1 inch to be safe

[@cwatson42785]

@@rcpimp6419 Oh I saw it another comment those are the 1" you installed. I thought they were the 2". Yeah ill definitely go with the 1" as well as that seems like plenty. I was also looking at the hot racing ones that I could get in a few days instead of a few weeks for the other ones but only gain 16.5mm per side with the hot racing ones. Thanks for the advice bro

[@rcpimp6419]

@@cwatson42785 hot racing stuff is ok , not great

[@cwatson42785]

@@rcpimp6419 Yeah I think the more reasonable thing to do would be order the dgi and just wait the 3 weeks. I got all the dgi metal links as well so should probably just go that route. Yeah I know hot racing can definitely be hit or miss for sure. Thanks for the advice!

[@monroethegreat7539]

it seems you know alot about Rcs, Am trying to change my pinion gear from 17t to18T for alittle more top end speed on my Losi DBXL-E, For some reason i cannot get the Pinion gear off because of the Loctite glue any suggestions?

[@rcpimp6419]

Heat it up with soldering iron - where the screw is . Or heat gun. Need to heat up threadlock - then it will let go

[@monroethegreat7539]

@@rcpimp6419 Thanks bro

[@rcpimp6419]

@@monroethegreat7539 any time

[@juliemiller5740]

Nice.

[@rcpimp6419]

😊

[@never-stock-rc2968]

+1 sub here man!! What size would you put on a kraton 8s? The one inch or two?? Thanks

[@rcpimp6419]

1 inch :) Thanx for watching !

[@legit_187ttv6]

What's the purpose of O ring just sit there?

[@rcpimp6419]

prevents the pin from coming out

[@legit_187ttv6]

@@rcpimp6419 I did see that sorry, didn't want to keep commenting ty much. Got mine on n drilled out the mx43's to fit. Idk why I didn't get no caps though? Every pic on site even the 2in extensions I bought had caps in pic idk

[@rcpimp6419]

@@legit_187ttv6 no idea...i got them

[@eddiefitzgerald7731]

What do i have to do to fit them tires on mind can u help

[@rcpimp6419]

to fit these tires to dbxle ? nothing . Just slap them on using stock hardware

[@eddiefitzgerald7731]

@@rcpimp6419 so just by tires or rims an tires

[@jasonhowerton8561]

What tool is used to remove extenders ?

[@rcpimp6419]

just a wrench

[@ohmyqwad8705]

What wheels are those?

[@rcpimp6419]

From losi dbxle 2.0

[@parrishhunter1843]

We’re those the 1” or 2” extenders?

[@rcpimp6419]

1 inch . I thought 2 might be to much - works great

[@ahwayzcool4630]

Question. Why would you need wheel extenders? For looks only?

[@rcpimp6419]

@@ahwayzcool4630 no. The truck is much more stable with them . Hard to flip it over now

[@ahwayzcool4630]

@@rcpimp6419 Oh ok. Yea my truck sometimes flips over in grass if I corner to hard. Guess I'll get a set of these for my truck to. 🙂

[@rcpimp6419]

@@ahwayzcool4630 it works very well :)

[@NickMorris-b4o]

What size Allen key did you use to take out that set screw?

[@rcpimp6419]

dont remember. Was nothing special

[@jrg4435]

O