Losi How-To: Rebuilding the Differential of Your RC Vechicle

[@nickcosentino5368]

I've looked most of the day looking for how to repair CENTER dif. Every search goes to front diff. Case in point.

[@IUsedToBeAPygmy]

I completely agree. I've just bought my SCTE and I'm starting to upgrade it left and right and I'd really love to have a more step-by-step for making the SCTE diff's not leak, and swapping the grease for oil.

[@DoubleClutchProductions]

Are you guys planning on revamping your youtube channel in 2021?

[@flarganyagerman]

For anyone wondering!!!! The drill he is using is a Hitachi DB3DL2 and the 1/4in Hex bits are from MIP

[@JHKNVY02]

Lots of us want a video for the SCTE. They habitually leak and there are fixes, loctite, different o-rings, etc. Big demand for this and it would be helpful to many of us. The SCTE is either a roller or RTR so you also have many new racers buying them. Not assembling the gears from the beginning make doing a rebuild tougher since the instructions are not very good. I used the 1/8 scale buggy instructions from Casper, but they are not exactly the same. Please make a 1/10 SCT video Losi.

[@flubber781]

all hail king Drake and Losi

[@brando555555]

+flubber781 All hail King Drake and his mighty mbx7r ;)

[@jkw4277]

+brandon Is he not running Losi anymore?

[@brando555555]

***** No, he switched to Mugen last year.

[@jkw4277]

I didn't know that, thanks.

[@vapovick]

@Adam I see you filled the diff oil all the way to the top,. but the Mugen manual says up to the point where the e2240 shaft crosses? Which is best? Thanks for all the great videos!!

[@dacgaming415-30P]

I have a sandmaster mk2 nirtro buggy. one side is tight the other side i can turn by hand if holding the tire or using allen wrench too hold it . is something broken inside cause the car does not move when u give it the gas.

[@kavanerwee3244]

my center diff isnt turning or its slipping everything inside seems fine but it's still slipping when i put my car in revers it works fine but when i put it in drive it wont move at all

[@JoeDirt9671]

What is the model number on that hitachi impact driver. I have been looking for something like that? Also where do you find the small metric allens to fit them? Thanks

[@bigmac504]

Which diff house is better fot the 8t2? the square housing or the round housing with the inserts for the spider gears?

[@englandstillhasit]

Whys there so much conflicting information on here. Do I shim the o ring or not I have the losi screw box but none of the shims fit the out drive any help appreciated.

[@GenXGamer1]

What is your torque setting on the drill. I have a craftsman and am afraid of setting it to high.

[@renesteenstrup3470]

Jeremy Figueroa Dont use a craftsman, if u like your car...;)

[@71schaeffer0]

Just wandering how often do you change diff oils?

[@rdhr151]

what kind of diff oil or grease should I use on my mini 8ight? part number? thank you

[@jean-philipetangay4219]

How do you create or assembly a losi xxl2e rear diff for being tougher cause it keep break

[@patriots46714]

Jean-philipe Tangay bud I'm having the exact same problems with let 2 xxl 2 e in fact it's on the bench as I type this out.!!!!!!!!!

[@justinponto9021]

Thanks I just listen to this n it worked

[@armoredzombie14]

now i need to know how to disassemble the diffs i cant find anything on it on losi tlr racing or here on tube

[@AB-80X]

Which rig do you run? If it's a TLR it's a kit and you put it together yourself. If it's an RTR it's a Losi and you need to look at the Losi website, not TLR.

[@Sammy31Dee]

what wts for losi Eight truggy 1.0?

[@traxxas2312]

3,000 in rear middle 5,000 and front 6,000 or 7,000 depens if you want more steering for more 6.000 and less 7,000

[@julionhanley5747]

traxxas2312 are you telling this to adam drake?

[@aiwseman80]

The ring gear is facing the wrong direction

[@seasonvett]

That what its suppose to do Lmao

[@nickteele169]

It pains me watching this.this is someone losi chose to represent them for diff maintenance? This is a shim but fuck it i dont like using it.oh and im going to completely tighten my crown gear using this drill lmao.seriously? And not go screw to screw tightening some on each as you go?