Losi Tenacity TT Pro : Upgrades and Opinions

[@TheflyingkiwiRC]

Thanks for the info, I haver just ordered one of these as a dedicated race truck. 😀😁

[@timb508]

You will enjoy it, weapons grade RC

[@N1SuperHornet]

Hello Tim For the front bumper. I have a question about the light bar placement How does the shell fit around and it if any modifications have to be done? I see that you have an aftermarket shell on

[@MrRawBurt]

can u send me some links of the products u used

[@Texasbroski512]

If you go with the shorter TLR servo horn you’ll get a lot more steering angle without links and other steering part’s hitting eachother I had a similar long horn and switched to the TLR and got alot more steering

[@timb508]

I appreciate this, I figured something wasn’t quite right there

[@hustlerkc11]

Just got this truck, what servo should I get?

[@Texasbroski512]

@@hustlerkc11 1258 it's plenty of power

[@N1SuperHornet]

Hi. Tim I have another question With the l bumper does the led light bar still fit the same way and what sizes screws are used to secure The RPM bumper And what recommendations do you have for the front center bumper mount? Been having issues trying to order. The part Since Losi decided to put that part in the battery housing replacement

[@timb508]

I honestly don’t recall the details with the light bar. I gave up on that after a while or it may have snapped, I think I just snuck the stock bumper in between the RPM and the chassis/diff. The ROM kit comes with any hardware you would need (as I recall). Body fitment should be fine stock, but yea you might just need to get creative

[@Mazdatechsenior]

Is 3:41 that noise normal when pushing the the rc by hand. I notice mine makes the noise.

[@timb508]

Yea they’re a bit loud from the gears and the motor itself, completely normal. Gets even louder if you swap the spur gear for steel

[@nickuvarov1]

Bro please share a link to the bumper.

[@timb508]

RPM73042 I guess I should have mentioned it’s technically for losi TEN-SCTE but fits the same, lasted me forever

[@ianfletcher2187]

Silly question Tim, when you changed the position of the receiver from the side and placed it in the blue box off ebay, did you have to recalibrate? I'm new to this hobby ..

[@timb508]

The stock receiver… probably supposed to since it’s going from vertical to horizontal, but I don’t think I did or know how, I’ve moved on to a Dumbo X6Fg

[@Mazdatechsenior]

Would you recommend to replaced the whole shock or just replaced fluid with heavier weight fluid.

[@timb508]

Fluid, stock shocks are fine, I had self inflicted issues popping rod ends all the time because of a travel issue

[@marshallrc79]

Does the stock body fit between bumper and lightbar?

[@timb508]

Yea it does

[@marshallrc79]

@@timb508 did you need to install the "gearbox spacer" part they give you? I dont see why its needed

[@timb508]

@@marshallrc79 that spacer is for larger 3s batteries, it’s a stand-off for the batter harness. Eventually I bought a 3s battery where I needed it, then I had some thick foam material to adhere to my 2s batteries so they still fit too

[@marshallrc79]

@@timb508 the spacer that came with the rpm bumper

[@jasonrhodes9726]

Not a basher, there are much better choices.

[@timb508]

False, I bash it… therefore it is a basher, and nowhere within this video did I make mention that this was the best choice in RC. Great comment though J, you must be a fun person to be around

[@jasonrhodes9726]

@@timb508 around friends. I have been told I am a very fun drunk, and I don't drink.