Just Installed mine yesterday in my 19 X3. Loud AF and loving it! Thanks Rpm
@RPMPowersports3 жыл бұрын
Heck yeah man!
@marioeparral99343 жыл бұрын
@@RPMPowersports I just installed my bov sounds nice But I was hoping to get a rpm sticker with my order buy i didn't
@RPMPowersports3 жыл бұрын
@@marioeparral9934 shoot customer service an email and they'll send one!
@ricklee8244 жыл бұрын
Rpm thanks for the BOV for my 2018 x3 XRS, great product and easy install. Running the soft spring getting the high pitch turbo sound.
@adrianortiz652 жыл бұрын
where do you put the spring?
@williamr1344 жыл бұрын
I've been running the RPM BOV kit on my 2020 X3 RC RR for almost a year now. Sounds great, and not a single issue with it so far. Great product!
@gbaileyo73 жыл бұрын
Just ordered one for my 120! Thanks guys!
@keithj.geising5953 жыл бұрын
Ordered mine last night! Hope it comes fast! Im pretty stoked about this mod.
@gilbertmunoz35203 жыл бұрын
Mines is coming in a couple days can’t wait to put it on 🔥🤟🏽
@gilbertmunoz35203 жыл бұрын
Got mine a while ago actually got mine in 3 days best shipping and was during Christmas. Very easy to install and this blow off valve will surprise you so much great product defenitly a 10/10.
@davidhicks9823 жыл бұрын
Just fell in love
@MrRjizzel11 күн бұрын
What’s the point of the install? Is it just noise, or does this provide any better performance to the machine ?
@timbarro Жыл бұрын
Not the easiest install on my 2021 turbo r because i have a rear bench and was trying not to remove it. However, I was able to do it without accessing it from behind the seat. Hardest part was getting the vertical tube on, but after I got it on, I was able to connect to the turbo from the passenger side and finish it up there. I wanted to run the filter but was concerned it was too close to the turbo. Turned it horizontal but the most clearance I was able to get was about 3/4”. Ended up pointing it down and no filter. Hoping it doesn’t cause any issues not having the filter on. Didn’t want to take the chance having the pre-filter catch fire…especially with my kids in the car.
@RPMPowersports Жыл бұрын
Filter is not required!
@sethholmstedt44195 жыл бұрын
Thats sweet
@bryanmendez7411 Жыл бұрын
Just got mine today
@bryanmendez7411 Жыл бұрын
I just got mine today
@bigb65482 жыл бұрын
What exhaust. Sounds good
@stevenbillingsley39592 жыл бұрын
I am trying to install but I can't get my hands on any actual instructions for Can-Am X3 120HP BOV Kit. I can find it on your website, but the pdf won't open for me, can you please help
@alancuhh2911Ай бұрын
Can you put this on a brand new stock 2024 x3 without any type of tune?
@RPMPowersportsАй бұрын
Yes
@ghan14104 жыл бұрын
sorry man but that is not Mex, / the blow off valve sounds nice.
@JayNayMay3 жыл бұрын
I thought he said New Mexico
@mikewilliams75023 жыл бұрын
Yep, if that's Mexico, I'm buying property there ASAP- and yeah that POV is badass!
@chrisgoetz27893 жыл бұрын
Hahaa, you made it sound like you were shifting gears lol
@zcarlos7603 жыл бұрын
Do you guys have the kit for 2021 can am maverick x3 rr
@RPMPowersports3 жыл бұрын
All RR’s are the same so this kit will fit!
@MarcosGonzalez-hb5rv4 жыл бұрын
Is it ok to not have the blow off valve if you go in deep water. Some water holes get deep in Florida with rain. Just wanna make sure
@RPMPowersports4 жыл бұрын
Yes it can be submerged!
@ericmallow96504 жыл бұрын
This is not a 20 minute job on the 2020 X3 RR. It’s a pain in the ass.
@RPMPowersports4 жыл бұрын
Everyone's mechanical ability is different, this should have been a very easy quick install.
@ericmallow96504 жыл бұрын
RPM Powersports It not a difficult install but it’s not a 20 minute one on a 2020 RR. It takes that just to remove the rear rack in the back. Which needs to be removed to access the the rear intake tube from the inter cooler. I love the product, but it’s not a 20 minute install. I’m an ASE certified mechanic. Love your guys products.
@RPMPowersports4 жыл бұрын
@@ericmallow9650 Rear rack does not come off, behind the clutch intake tube you access the 54mm end of the tube with a flat head, and the other port on the turbo is through the access cover between the seats. Through the top with the bed off probably took much longer yes, but was unneeded and not part of the installation instructions.
@ericmallow96504 жыл бұрын
RPM Powersports You can get to the the clamp fine but installing the new tube would be a pain. My hands are not that small to get in there to remove the old intake and install the new. Be happy to post pictures.
@RPMPowersports4 жыл бұрын
@@ericmallow9650 I consider myself to have pretty big clubs for hands, thats where we install them from, we do a few kits a week. Im sorry you had issues. Shoot us a DM on social media and well send you a shirt and koozies to you for the hassle!
@allenrottenberger52052 жыл бұрын
Why is there a delay from releasing the throttle to hearing the valve-purge.
@RPMPowersports2 жыл бұрын
Engine drag from the CVT. You may be letting off the gas, but the clutches are still engaged propelling the motor.
@hunterpowers65783 жыл бұрын
Do you guys sell one for a 2015 can am maverick 1000r turbo xds?
@andrewhalvorsen220123 күн бұрын
Can you run this with stock muffler/exhaust?
@RPMPowersports22 күн бұрын
YES!
@gjs25005 жыл бұрын
Is it manual or automatic gearbox
@RPMPowersports5 жыл бұрын
CVT
@RPMPowersports5 жыл бұрын
CVT
@mattbrown77564 жыл бұрын
🤣
@robertridenhour17798 ай бұрын
Hey rpm i was wondering if there was a video for how the different springs sound in the bov???
@RPMPowersports8 ай бұрын
The changes the springs make are really dependent on each machine. So the changes they make on one, would be different on the next guys, Especially with all the different boost level and power variations of the X3.
@robertridenhour17798 ай бұрын
@@RPMPowersports well would you be able to tell me which one will be the loudest then? And I can just go through them myself,thankyou for the response!
@RPMPowersports8 ай бұрын
@@robertridenhour1779The softest would be the "loudest" and longest expel of air.
@Cowabunga8084 жыл бұрын
Just put this BOV on my 2020 Turbo RR and spent 3 days loving it out in Ridgcrest over Thanksgiving. I'm just curious to why there is 2 springs in the box ? Couldn't see any differences and neither was labeled. Possibly just an extra, I don't know. Tried calling your tech support but no answer, possibly you guys are still out for the holiday. Well I'm stoked on the product, it sounds awesome, just trying to get some answers. Thanks
@RPMPowersports4 жыл бұрын
We recommend the softer spring ( the one that comes in it ). The Heavier spring will slightly change the tone is all. Under tips in the instructions we cover why we use the softer spring. Sorry we missed your call! 10-6pm is when we're in!
@patarisman4343 жыл бұрын
i live in ridgecrest lol
@carocaro81553 жыл бұрын
How can I order one for my 2020 can am x3
@benjaminburgess93952 жыл бұрын
Not a gear head but doing this myself. Stupid question maybe but where in tf does this spring and black cap go??
@RPMPowersports2 жыл бұрын
Black cap is only used when pressure wresting the charge system, extra spring is for changing the sound of the bov.
@RobertPorter-t7q7 ай бұрын
So what's the springs In the box for?
@RPMPowersports7 ай бұрын
To adjust the sound.
@r.attila8924 жыл бұрын
How much is the post office to Budapest?
@renzomansillarozan7902 жыл бұрын
Hello, I have a question. I have a 2018 model. It is compatible because it appears on Amazon from 2020 to 2022.
@RPMPowersports2 жыл бұрын
We have a kit for each model
@marioflores48903 жыл бұрын
I installed mine today and when I accelerate is when it releases why could that be? I also installed the filter that came with it
@RPMPowersports3 жыл бұрын
it's likely while you're cruising that you hear it, under 100% throttle if it was releasing, it wouldn't have any boost to make power so wouldn't accelerate at all.
@fredarceo30624 жыл бұрын
He said they dont use filters, I just received the kit for an 20202 ds turbo rr came with a filter and cap I'm confused
@RPMPowersports4 жыл бұрын
We include the filter but we don't run one and it's not needed. The billet "cap", I assume you mean plug, is included as a tool if you ever want to remove the BOV or test for boost leaks.
@C63stom4 жыл бұрын
I purchased this kit from you. Uk 2020 rc . You sent 2 springs I have left the one in you sent fitted. Is the extra spring stronger or less.
@RPMPowersports4 жыл бұрын
Stronger, but I recommend the spring that was in it when sent. It's personal preference really.
@mrruben39774 жыл бұрын
Is that spring more louder or less louder?
@mrruben39774 жыл бұрын
Which spring that comes in the box is more loud?
@jorgee22883 жыл бұрын
I just installed mine but its not loud. I followed your video and website instructions and installed it correctly. What could it be?
@RPMPowersports3 жыл бұрын
Need to make sure you’re actually driving the car and not tying to test it in neutral. Shoot us a call and tech support will get you squared away!
@icut4canelo4003 жыл бұрын
Hey man I installed mine only issue is there’s a rattling noise as well as there’s leaking from the bov
@RPMPowersports3 жыл бұрын
The "leaking" you're hearing is the vacuum. Bottom portion of the instructions. As far as rattling there isn't much for anything to rattle. Make sure the BOV is angled correctly and not hitting the turbo.
@giovannijimenez40423 жыл бұрын
How different are a 2020 turbo r bov and and 2019 turbo r bov? I might’ve confused and ordered a 2019 because I cannot install the Silicone tube?
@RPMPowersports3 жыл бұрын
The 2019 silicone tube are definitely different. they are 10mm shorter and 5mm skinnier.
@alceballos46263 жыл бұрын
Are these louder than the Evo blow out valve ?
@RPMPowersports3 жыл бұрын
Best bet is to compare videos and decide for yourself on that one.
@sxsoffroad432 жыл бұрын
Sic
@vf124974393 жыл бұрын
Guess I'm just getting old? BOV making noise doesn't give you any performance increase, I hear claims of better than the stock unit yet I havent actually heard anyone complain that their stock unit failed. To me this is like some kid putting a whistle in the tailpipe of a pickup truck trying to play like he has a turbo. Like I said... maybe I'm finally getting old and I dont get it anymore?
@RPMPowersports3 жыл бұрын
You probably haven’t heard of many stock unit failing because....... there isn’t a bov on the x3’s stock..... that’s the issue. As far as performance gains, better throttle response and prolonged turbo life. As far as noise, it’s personal preference, we offer a kit that provides all the gains and no noise as well.
@reneulloa24374 жыл бұрын
Is air leak normal through the bov? And also does it use a stiff spring?
@RPMPowersports4 жыл бұрын
Yes, we cover this in the instructions. rpmpowersportsomaha.com/instructions/X3_BOV_ver3.pdf
@reneulloa24374 жыл бұрын
I just got mine u guys running the soft spring in the video?
@RPMPowersports4 жыл бұрын
@@reneulloa2437 We use the stiff spring ( the one we ship it with).
@Blue-wv1rg3 жыл бұрын
Will this affect my mass air flow sensor Since now there’s an exit for air that the mass air flow sensor is looking for?? I don’t have a tune on mine
@seanysk82 жыл бұрын
What if you ride deep mud? Should you vent it higher?
@RPMPowersports2 жыл бұрын
As long as its mud and not pure water you'll be fine.
@azzhole2164 жыл бұрын
Is this for the 2020 x3 turbo RR
@RPMPowersports4 жыл бұрын
Check out our store RPMSxS.com for an RR kit as well!
@juansaucedo47843 ай бұрын
does this fit my x3 max ds
@RPMPowersports3 ай бұрын
As long as its not a base model, but we have a kit for base models also!
@edwinsanchez5603 жыл бұрын
Are you running an exhaust on that RC as well? Sounds great
@RPMPowersports3 жыл бұрын
Yes, our muffler and mid- pipe!
@1ttcobra20033 жыл бұрын
@@RPMPowersports Hi, will I need a tune with these three items? Bov, mid pipe and exhaust.
@RPMPowersports3 жыл бұрын
@@1ttcobra2003 if you do a mid pipe AND muffler then yes.
@JoseCervantes-x9d Жыл бұрын
So it’s plug n play? Won’t need to get tuned?
@RPMPowersports Жыл бұрын
No tune needed
@oscarmendez66534 жыл бұрын
Will this fit a x3 xds cause on website it doesn’t say ?
@RPMPowersports4 жыл бұрын
We have 3 kits, one of them will fit it, it just depends what model / year X3 XDS you have.
RPM Powersports thank you for the great response ordering it rn !
@dj3zero33 жыл бұрын
Any idea if there is one for a 2021 can am x3 max??
@RPMPowersports3 жыл бұрын
Yes there is RPMSXS.COM
@TylerDylan214 жыл бұрын
Since when did “Mexico” look that nice.🤔🤔
@BAMFisGOOD4 жыл бұрын
TylerDylan21 There’s actually lots of neighborhoods in Mexico that are much nicer than that.
@marioeparral99343 жыл бұрын
Would installing a BOV will cause turbo to overboost? Installed mine last week amd yesterday wen out to triails and i got. A check engine code PO234 any ideas what cukd of cause this
@RPMPowersports3 жыл бұрын
Usually caused by a boost leak, check the clamp at the BOV.
@RPMPowersports3 жыл бұрын
Also, check the map sensor located on the drivers side firewall. Has a few small hoses going to it. Commonly damaged during install.
@fredarceo30624 жыл бұрын
Is the filter supposed to be in the downward position I'm getting a delay on the sound/release
@RPMPowersports4 жыл бұрын
Yes, keep it downward, this doesn't mean straight up and down just at a downward angle. If you're hearing a delay after a high speed or long run it's because there is still pressure in the charge tubes, this is normal. if you do short blips of the throttle you'll notice no delay as its actually not at max boost. Boost itself is what opens and closes the BOV.
@fredarceo30624 жыл бұрын
Thanks for the quick reply, I tried to point it in the downward position but the filter touches the turbo and the top of the motor not allowing it to be in fully vertical downward position, it's at a slight 45 degree angle towards the front of the x3. I'll try it with out the filter.
@RPMPowersports4 жыл бұрын
@@fredarceo3062 It doesnt need to be completely downward, the 4 or 8 o'clock ( like on a clock) angle is sufficient.
@dylanhamilton93933 жыл бұрын
Does blow off valve have to be hooked to the intake
@RPMPowersports3 жыл бұрын
There is a reference line between the BOV and plenum.
@Teslaplaidjohnny2 жыл бұрын
Do you have a link for Amazon?
@RPMPowersports2 жыл бұрын
Faster delivery off our website.
@chadrayl9648 Жыл бұрын
20min my ass, on the 22 rr you have to move 2 more big pipes, an heat the hell out of it to come close!
@RPMPowersports Жыл бұрын
The 22 is the same as the 20’s…. Which is what was filmed in this video. We install them in less than 20 minutes, no tubes need removed but everyone’s technical level is different
@DixieNormas5 жыл бұрын
I mean how could it not be loud? You left the center cover off and its sitting right on top of the turbo, I'm sure that heat will be good for it right????
@jasondkx805 жыл бұрын
TheDude, 1500 miles and no issues with our BOV. Even though they come with a 2 year warranty we have yet to warranty any components. Cheers mate.
@RPMPowersports4 жыл бұрын
The dude, check out our BOV Q&A video! We heated a BOV up to 750* with a torch and then ran it!
@colin_87 Жыл бұрын
Which spring are you using for that one?
@RPMPowersports Жыл бұрын
Soft
@colin_87 Жыл бұрын
I'm up in Canada & I just ordered the kit for my 2022 XRC 72". Which spring should I use for more air sound & less high pitched sound?
@RPMPowersports Жыл бұрын
@@colin_87 start with medium, then try the heavy
@frank4runner4 жыл бұрын
What exhaust are you running?
@RPMPowersports4 жыл бұрын
RPM SxS
@GerardoGonzalez-vh1nz2 жыл бұрын
where can order one bud?
@RPMPowersports2 жыл бұрын
RPMSxS.com
@salooo7e4 жыл бұрын
There’s no for turbo RR :(
@taradickey95534 жыл бұрын
QTR 88 you have to call and specify that it’s for the RR.
@RPMPowersports4 жыл бұрын
If you give us a call or email we can get a RR tube sent !
@hiimcanelo2894 жыл бұрын
Do you need a tune?
@RPMPowersports4 жыл бұрын
No tune is needed!
@hiimcanelo2894 жыл бұрын
@@RPMPowersports i had the evo but it’s not working at all for me . They told me I needed a tune to hear it more . can you send me the exact link for a 2018 can am xrs turbo r ? and will you guaranteed me that it’ll sound like this?
@RPMPowersports4 жыл бұрын
@@hiimcanelo289 We have a lot of videos of these on stock machines! Here is what you need! rpmsxs.com/collections/can-am-bov-kits/products/can-am-x3-blow-off-valve-bov-kit-2017-2019
@hiimcanelo2894 жыл бұрын
@@RPMPowersports do I need to get the Blow Off Valve Recirculation Kit as well?
@RPMPowersports4 жыл бұрын
@@hiimcanelo289 You do not need that.
@peterpann96192 жыл бұрын
What's the point of a bov, waste of money.
@RPMPowersports2 жыл бұрын
Waste of money how so? Or do you just not know the point of them is for more than just sound.
@peterpann96192 жыл бұрын
@@RPMPowersports Factory setup is perfect, like I said waste of money
@RPMPowersports2 жыл бұрын
@@peterpann9619 You mean the non existent BOV from the factory? Every factory forced induction ever has a BOV from the factory except BRP's. Faster turbo re spool times, better throttle response, drastically longer turbo life, and increased reliability are all things that you must hate.
@peterpann96192 жыл бұрын
@@RPMPowersports I stand corrected, do you have one that's not so loud?
@RPMPowersports2 жыл бұрын
@@peterpann9619 We have a recirculation kit. This recirculates the air back to the airbox, eliminating the noise.
@Mywrx4 ай бұрын
Worst installation video ever
@franciscoaguilar96713 жыл бұрын
I bought one from you guys and I installed it , it sounds pretty cool bt it came with 2 extra springs? Is there a diffrence in the springs???
@RPMPowersports3 жыл бұрын
They will change the tone of the BOV is all.
@raymond9973 жыл бұрын
So like you can run it without the filter so will it be fine?
@RPMPowersports3 жыл бұрын
That’s correct!
@lowlifebroc4 жыл бұрын
I just ordered mine last night. Great video. I’m super excited. I should get it Thursday. Thank you
@RPMPowersports4 жыл бұрын
She's shipping out today!
@miguelgastelum43784 жыл бұрын
Ware are u guys located or ware can i order
@RPMPowersports4 жыл бұрын
Link to the products are in the description. We’re based out of Omaha Nebraska
@xavierbenavidez7101 Жыл бұрын
My blow off valve stopped working the first day I installed it , it made a exploding sound and stopped , any recommendations of what happened?
@RPMPowersports Жыл бұрын
Sounds like a clamp was loose and it came off the intercooler or turbo.
@EmilioRivera12 жыл бұрын
Jus ordered mine for my 2022 can am hopefully it sounds this good on it. Would a big mouth cat delete make it sound better also??
@RPMPowersports2 жыл бұрын
Yes, the big mouths help the muffler tone a ton!
@draykemartin6347 Жыл бұрын
So where’s this filter go? As well at this isn’t no 20 minute job on the 19 ds models
@RPMPowersports Жыл бұрын
Filter goes on the end of the BOV, It acts as a muffler only, not used as a intake filter. Install always varies on mechanical ability. For what it's worth, we install these in under 10 minute at trade shows all the time.
@jfig642 жыл бұрын
Only sounds on light throttle and not when I do a full throttle. What could be happening?
@RPMPowersports2 жыл бұрын
Boost operates it. its probably a lot nosier in the cab at full throttle. Its working, you just don't hear it from IN the car due to the exhaust and wind noise.
@001therob Жыл бұрын
Is it water proof? We sometimes go in some deep stuff with the snorkels XMR.
@RPMPowersports Жыл бұрын
As long as you’re not submerging past the intercooler. Otherwise we have a recirculation kit or you could snorkel the BOV. It can be under water, just not constantly
@balslammerracing14balser952 жыл бұрын
I’m ordering one now , but do you have a video on adding a boost gauge ? Any find anything on the web about it
@RPMPowersports2 жыл бұрын
You would just add a T fitting on the rubber reference line is all!
@soonermike42 жыл бұрын
How much do you charge to install this?
@cristiansalas24584 жыл бұрын
Hey guys can I please get a link as well I just don’t want to order an incorrect one I have a Maverick X3 Max X RS Turbo RR
RPM Powersports i really appreciate the fast response!
@Jr-eu9ex2 жыл бұрын
Is there an install video of this product? Also will it work on a 22 x3?
@RPMPowersports2 жыл бұрын
Detailed instructions with every purchase!
@Jr-eu9ex2 жыл бұрын
@@RPMPowersports that’s great! But I’m more of a seeing to learn then to read when it comes to things like this 😅 but hopefully I won’t have any problems installing it. Thanks
@AngelFlores-pl4yy3 жыл бұрын
Its working in xr 2021 smart shocks?
@RPMPowersports3 жыл бұрын
Yes!
@danielsolano69312 жыл бұрын
Hi I have a 22 on order so RR would work right And also can this be submerged without damaging anything ? I live in florida and that’s 90% of the riding around here
@RPMPowersports2 жыл бұрын
Yes we have a kit for the 22’s! You’ll love it!
@danielsolano69312 жыл бұрын
@@RPMPowersports can I submerge without adding the recirculating kit ? I want the whooshing sounds lol
@RPMPowersports2 жыл бұрын
@@danielsolano6931 Yes!
@danielsolano69312 жыл бұрын
@@RPMPowersports buying today thanks 🙏🏼
@Coyote.five.02 жыл бұрын
hi rpm, i just installed your bov sounds super loud and love it thanks, but i have one question, i installed my bov facing the filter to my cabin in a 2 o clock position upwards, i dont ride ever in deep water or near water i live in the dessert so do you think im good leaving it in that position? i would preffer to leave the filter in place, because of dusty conditions. thanks in advance
@RPMPowersports2 жыл бұрын
You'll be okay!
@Coyote.five.02 жыл бұрын
@@RPMPowersports thanks
@RPMPowersports2 жыл бұрын
@@Coyote.five.0 No problem!
@MiAvetteLs34 жыл бұрын
I see the bov is really close to the hot side of the turbo isthe bov plastic or billet?
@RPMPowersports4 жыл бұрын
Yes, all billet with Viton O-rings.
@MiAvetteLs34 жыл бұрын
@@RPMPowersports tks i bought it but is hose suppoused to be a bit bent?
@RPMPowersports4 жыл бұрын
@@MiAvetteLs3 Make sure its all the way up the intercooler! IF it is give us a call and well help diag the issue.
@BlueJJ5624 жыл бұрын
Does this fit the 2020 CAN AM XRS 1000RR?
@RPMPowersports4 жыл бұрын
Yes it does
@snowmanreed63743 жыл бұрын
All turboed x3 Can-am's are 900 c.c. 3 cylinder engines Not 1000 c.c. and polaris 1000 turbo rzrs are actually 925 c.c. engines
@dylanhamilton93934 жыл бұрын
What are the springs that come with it there are 3 springs
@RPMPowersports4 жыл бұрын
Each will change the tone of the BOV. the top portion of the instructions covers it.
@dylanhamilton93934 жыл бұрын
RPM Powersports ya put it on and love it.
@RPMPowersports4 жыл бұрын
@@dylanhamilton9393 Thanks for the awesome feedback!
@dylanhamilton93934 жыл бұрын
Do you sell valvetronic exhaust or know any good place that does?
@RPMPowersports4 жыл бұрын
@@dylanhamilton9393 We sure do! we have a 2.5", 3", and 3" titanium one! rpmsxs.com/collections/can-am-exhaust
@laytonwhite56024 жыл бұрын
Is there any power gains? Just ordered mine!
@RPMPowersports4 жыл бұрын
Smoother and better throttle response and increased turbo longevity. Plus the cool sound! HP and TQ remain the same.
@mavica1304 жыл бұрын
Layton White Actually without a tuner you will lose power. Don’t let these guy fool you
@laytonwhite56024 жыл бұрын
Evil DroneZ yikes Too late
@RPMPowersports4 жыл бұрын
@@mavica130 That literally makes no sense haha. A BOV has absolutely nothing whatsoever to do with the tune, no fueling, no timing, no boost, no nothing is increased altered or manipulated in any way with a BOV. you WILL have better throttle response though. A BOV will in no way increase the power whatsoever.
@RPMPowersports4 жыл бұрын
Also to note, WITH a tuner you will also see no power gains from a BOV, its job isn't to increase power, its job is to prolong turbo life.