Low budget hydrographics tank

[@boxer71c55]

Bro out of all the channels I've watched, You have the best tips!

[@edwardrangirangi3203]

One of the best diy vids out there for sure. Great job.

[@denisbeaudry7]

Thank you for the video! I've been looking everywhere for a cheap way to start my business. Thanks again!

[@PainRanch]

Nice setup! I made mine from a chest deep freezer! free insulation also and a lid to store it!

[@34nickt]

Chris Kendall this is what I was thinking about doing if you dont mind could you send me some pics and anything you did for setting it up. I was thinking about installing a water heating element because I was just going to dip every now and then. my email is [e-mail] if you want to send or anyone else wants to send any ideas.

[@MrIceman19401]

Can you send me some pics also would appreciate it. [e-mail]

[@sigig4278]

i use a couple of fish tank heaters, the big ones and I also use a fish tank agitator. to clean the mess after dipping i use a wet/dry garage vacum. i also use a large plastic feed tank from tractor supply

[@DT-uj1kr]

Great clip thanks for not wasting a bunch of time with needless talk and assembly stuff. I am looking for your clip about making the activator.

[@Belicose777]

Pretty Ingenius set up.

[@CD-ch9gj]

love your videos mate. thanks for the sharing

[@r.llynch4124]

12 people want tp sell 6k stainless tanks. LOVE the tank simple and works what else would you need? nothing!

[@richb7414]

Stainless is cold to the touch not because it is actually cold, but because the heat transfer from your hand to the metal is faster than your body can produce heat. It is same exact temp as fiberglass is even though fiberglass doesn't feel cold at room temp.

[@jonuhh10]

Awsome tank .. I can't wait till you make the activator video :)

[@KeeWeeKustoms]

Hi Jonathan, thanks for your comment. I have been a little busy but I promise, that video is coming, I'll shoot it tomorrow :)

[@jessebenjamin4779]

Glad I found your videos!

[@fadia1212]

I found the video about the activator. Thank you Keewee

[@thebosslucas]

You my friend are a legend!

[@billtr96sn]

Thanks for this mate, going to hunt down your activator vid now

[@joegormanly]

hot water is hot water just love your homemade tank

[@KeeWeeKustoms]

Exactly Joe, no need to make it any harder than it has to be :)

[@jeffjanney4336]

Nice! Perfect for a smaller space, smaller budget, and requiring a smaller effort. What was the fiberglass tank used for originally...knowing that would provide a clue as to where to look for something like it. Please advise. Anxious to see your activator video too. :-)

[@KeeWeeKustoms]

Hi Jeff, thanks for your kind words. I have actually perfected this design now (see my other video). The tank originally came out of a Firetruck. I have a friend who manufactures them for the fire dept, so it was originally used to hold water. I have also posted my activator video now :)

[@benfalk4271]

dude awesome job thanks for the video

[@18B_Porta-Poty_PTSD]

He said "You could probably drink it if you like hot water" haha bravo, well said👏😆

[@ebhsports6251]

Yeah nice. You should buy some insulation at the hardware store and wrap it. It'll stay warmer much longer.

[@Pyper70]

Right on with the MacGyver innovation. I am reading that the water should be 70ºF (21ºC) though. Does 30ºC indeed work best for you? I want to make myself a tub as well and was looking at heating elements but after your video, I may just run a small water heater that regulated with a Ball Valve

[@richarddavey3305]

great job

[@KeeWeeKustoms]

Thanks Richard :)

[@vtwinraven9135]

awesome video & nice work on your dippings. What was that tank originally used for ? I have been trying to find it online but have yet to track it down. Please make more videos...

[@donmorgan4605]

Hey Darren.I am just getting going in the game over in Perth.Followed your videos seems to be going ok but when I dip it doesn't seem to set the film and stays snotty on the item is there anything you could advise me with.Appreciate any help you could giv me.Thanks Don.

[@NfldBiker]

Well done!

[@KeeWeeKustoms]

Thank you :)

[@jasonrene5189]

when doing Motorcycle wheels( need consistent pattern) I assume you back mask one side then dip. then rinse ,then dry ,remask freshly dipped side , and dip remaing side. However does masking freshly dipped side of a motorcycle wheel pull off ink or is it durable enough to accept masking tape?

[@VinceYoungIsTheBest]

Jason Rene I would also love to know the answer to that if someone could reply! Thanks

[@caitlyntroutman4943]

Do you have any suggestions on where I might be able to find a tub similar to the set up you have?

[@fadia1212]

Hello Weewee, you are amazing When are you going to film the video for the 12 $ activator ? Thank you and keep on the good job

[@bustacap7441]

Why can't you just scoop the xtra film out of the tank?? Just curious TY

[@clubbingbabyseals3504]

would a decent size chest freezer work good for a budget tank mate?

[@tonyregan4343]

Just wanted to know the size of the tank in length width and depth of it

[@lanoriadgo1]

That things awesome

[@KeeWeeKustoms]

Thank you Jose :)

[@SeanVs786]

thank you :-).. you did a big favor for me mate..

[@aaronmcdaniel1952]

craigslist is always offering up hot tubs free... seems like it would make a nice fiberglass tank....

[@veilsyde]

Yes how do you make 12 dollar activator?

[@KeeWeeKustoms]

All will be revealed :)

[@hahahahaha4565]

"you American people" lmaoooo

[@ayieplorenzo7262]

Can i know what the tank name for i search in online shop??

[@noahduffy9452]

Could I use a hot tub

[@MrIceman19401]

What's thickness is your tank?

[@WorldofGlassCraft]

What was that tank really made for so I can find one to buy please?

[@cloverdale87]

WorldofGlassCraft It is a fiberglass bath tub

[@fadia1212]

Amazing

[@Tj1056]

Great idea, now I just need to go find a free bath tub lol... dont think I will be able to find a fiberglass tank like that -_- .... I will just fill it with cold water and run it like that lol...

[@richardearl7099]

where could i pick one of these up for a decent price

[@officialWWM]

Build it yourself Richard, its easy :)

[@godlistenfidelis5293]

Will you make one for me

[@thejigfreak4070]

yes..do teach how to make a 12 dollar / liter activator..help us save money

[@KeeWeeKustoms]

Sorry for the delay, I will post that video tomorrow.

[@taralovewestwest]

Epic

[@anuzh1506]

all they use normal water or else

[@fadia1212]

Sorry I made a mistake: Weewee = Keewee

[@m.gservicesireland2808]

3:53 ohh American ppl :D loooooooooool

[@madmade6877]

Get a pool net easy

[@richarddavey3305]

great job

[@KeeWeeKustoms]

Thanks Richard. I have actually perfected my design now, I will have to do an update video :)