Low Temperature Aluminum Radiator Repair with Super Alloy 1 Aluminum Solder and Flux Kit

Super Alloy 1 is used in thousands of shops in the US. Mike demonstrates how to make the same repairs your local shop is using... with a propane torch. Always clean your aluminum before soldering. A stainless brush works well to clean the aluminum tubes. You can repair cuts in the side of the tubing. You will need to remove the fins in the area when working on the side of the tube. Super Alloy 1 will not burn or melt the fins if soldered correctly. The same rod will work on brass radiators. Always work perpendicular or straight up from the hole or cu in the radiator. You want to torch to mushroom out evenly when the flame hits the aluminum. This will ensure an even heat on the tubing. You can solder on the tube to header on the aluminum and brass radiators. If you only have an oxyacetylene torch to work with, just make sure to turn the oxygen way down as 350°F can get there quickly with this torch. The rod will work with some heat guns. Always flux before, during, and at the end as the flux is needed to make an airtight repair. You can work with the radiator in the vertical position. Let the solder cool naturally. You can use warm water and a wire brush to remove the flux. Clean the flux off of the rod before placing it back into the PVC tube.
#LowTempRadiatorRepair #RadiatorRepairTips #HowToWeldAluminumRadiators #SolderAluminumRadiators #AluminumTubingRepair #SolderRadiatorVideo
Please read all instructions prior to use at: www.muggyweld.com/wp-content/...
For more videos and information, or to order, visit:
www.muggyweld.com/product/sup...
_________________
Please visit www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.