Lower Control Arm Replacement (Honda Odyssey 1999-2004) | Handy Hudsonite

The front lower control arms provide stability and assist with the steering of your vehicle. When the control arms go bad, they need to be replaced. Learn how to do a complete front lower control arm replacement (This repair was done on a 2004 Honda Odyssey (1999-2004 models). Be sure to subscribe and hit that notification bell for more tips, hacks, and reviews so you can get the job done!
❤️ If you enjoyed the video share it with a friend using this link: • Lower Control Arm Repl...
🔴 The best KZbin growth tool (free): www.tubebuddy.com/handyhudsonite
------------------------------------
Subscribe To My Channel ---------kzbin.info?su...
------------------------------------
Who Is Handy Hudsonite? My name is Matt and I bring you exclusive DIY Tips, Hacks, and Reviews so that you can GET THE JOB DONE.
I upload videos on a regular basis so be sure to subscribe to my channel so you don't miss out on a topic that will help you to accomplish a project.
MY GEAR:
✅ Apple Phone: amzn.to/2WMXVJP
✅ Logitech Webcam: amzn.to/2WL2STK
✅ USB Boom Mic: amzn.to/2JKXjRy
✅ Lighting: amzn.to/2VrNsSM
✅ Bushnell Tripod: amzn.to/2w1Jlm8
🔴 Watch All My Handy Videos ➤ • Handy Hudsonite Entire...
🔴 KZbin Channel Growth Tips ➤
• KZbin Channel Growth...
🔴 More Handy Tech Tips ➤ • Adobe Premiere Rush CC...
🔴 Mastering Gmail ➤ • Mastering Gmail (Tips ...
🔴 Handy Auto Tips ➤ • PCV Valve Replacement ...
🔴 Product Reviews ➤ • Ecofan Heat-Powered Fa...
🔴 Subscribe Here ➤ kzbin.info?su...
⇒Connect with HandyHudsonite
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
My site ⇨ handyhudsonite.com
⇨ / handyhudsonite
⇨ / handyhudsonite
⇨ / handyhudsonite
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thank you for watching the video and be sure to like it and subscribe to my channel. Until next time, be handy and get the job done!
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
If you are a KZbin creator or just getting started on KZbin, be sure to include TubeBuddy for supreme optimization, templates, tags and thumbnail tools: www.tubebuddy.com/handyhudsonite
(Image Credits: flaticon.com)
(GIF Credits: giphy.com)
(Video Credits: pexels.com)
Disclaimer:
Due to factors beyond the control of Handy Hudsonite, I cannot guarantee against improper use or unauthorized modifications of this information. Handy Hudsonite assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Handy Hudsonite recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Handy Hudsonite, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Handy Hudsonite.
#controlarm #replacement #handyhudsonite

[@HandyHudsonite]

Have you ever had your lower control arms replaced? Did you have it done at a local repair shop or did you replace them yourself? Thanks for watching. Be sure to subscribe for more tips, hacks, and reviews so you can get the job done! Be sure to watch this next: kzbin.info/www/bejne/qJ2vgHSQabGbq8k

[@farleylowe5416]

You're taking all day

[@shmeeglebeats8403]

Great video bro!

[@Joe2022hong]

Hi. Thanks you nice video for replace front low control arm honda odyssey

[@jaimeaviles6280]

Buen trabajo

[@parvishurghada]

Thank you. Very nice video.

[@HandyHudsonite]

You're welcome, Parviz! I'm glad you enjoyed this. I hope it was helpful for you. Control arms are really not that hard to replace and they make a huge difference when you get the new ones in! Thanks so much for watching.

[@manuelcal18]

Nice video

[@Alex_Rodrigez]

Good job 👏

[@shortfatbaldguy01]

Awesome video! The job went exactly as you described and went very well. Thanks!

[@johndelacruz1167]

Hood explanation...easy to catch...👌

[@chatphan1447]

Great job

[@elmexicanpowerstv9395]

Thanks for your video great job god blessed

[@adamabstrakt1227]

Great video! Thanks for uploading.

[@edwinaragon8469]

Good tip at the end

[@Calitexas2004]

U made it look so easy. Great job

[@danielcook2003]

MOOG sells this 181.99 one you bought, and considering it's a 2004 van and doesn't need 16 more years , I went with the 55.99 MOOG replacement.

[@CBR_Engines]

Fools mistake. Im a man. And daily a 04 being i work out of it. The side doors and seats removed very nice RELAIBLE van. Mine is at 210k miles. And its got the defective factory transmission. Been whining like a jet engine for 4 years at 140k miles. And this vans lived all 20 years in rust belt. And its rot free. Transmissions used are cheap. And not hard to replace. And when it comes time i can buy 1 for 300 and do the job in a day myself. Dont doubt honda... all cars have a flaw. But honda is a step down from a toyota. Imo being a engine repair/builder. Honda/yota are probably the top 2 cars to own for just being better in long term life then anyone else...

[@BigMacSam]

Nice job Matt!

[@HandyHudsonite]

Thanks, Sam! As I mentioned earlier this job is very easy and it's a great way to tighten up the front-end performance of your vehicle.

[@BigMacSam]

@@HandyHudsonite That's great man. I started watching that Fix it Angel channel. I never heard of him until you mentioned him. Another great YT channel. Thanks for sharing that.

[@HandyHudsonite]

Sure thing!

[@jptrainor]

A torque wrench with a crowfoot at ninety degrees can get the castle nut on the ball joint. But it's not a terribly precisely specified fastener to begin with, since you tighten to the lower torque in the specified range, and then tighten further however much it takes to line up the cotter pin hole. I doubt that most professional mechanics bother with a torque wrench for any of these fasteners.

[@lisam724]

thanks for sharing my wife took our Odessey in for inspection they wanted almost 1500 bucks to do both lowers talk about a screw job I could see a hundred a side and a little parts markup but I can't believe the 10 times the mark up on parts and over 400 labor on a 1 hour job for both I said Ill do it the guy smirked that really got me pissed I bought parts did them in about an hour I took it back the next day at 8am he was surprised he said that was fast I said YEP I'm old ASE certified mechanic and by the way the bushings nor ball joints were bad I brought the old one with me to show them maybe they should pay me for lying ? they hit me up on an old truck I bought a couple years ago the place is what I call ball joint capital I told the guys at the VFW not to go there and spread the word crooks I will be getting ahold of the state patrol who monitors the inspection process I've worked on cars since the 70s until about 5 years ago now into painting and restoration along with diesel mechanic and equipment certified with emergency vehicle certs over 45 years turning wrenches since the marine corps can't stand people ripping off customers it's one thing if its honestly needed I'm ready to start a shop that Justs inspects vehicles no mechanical work so there's no reason to find thousands of dollars of un needed work it's a black eye to the honest mechanic's that don't rip people off we can all make a living without screwing people if you take offence you that you must be a rip off guy

[@basilioqhi3264]

Do you have to take car in for alignment after replacing control arms ?

[@Yey125]

Megus

[@williamguzman9060]

Iglesias Adventists Orlando central

[@danielhershman7051]

my neighbor lost all my tools can't borrow from him

[@mr.juicethebeetle3373]

Lol what