Lowrance LIVE | HDS Live Week 2 | Webinar

[@billreid4597]

Thank you Lowrance and specifically Jeremiah. Excellent videos, very helpful.

[@midiotsavant]

Just catching this now. Great session. Thanks for putting it together.

[@kendalllunsford775]

Another really good vid.......... Answers many questions that I have on basic setup........ Thank You.......

[@tomormand]

Very good information, well organized and presented! Thank you.

[@gnfishn1]

Very informative. But can you change the arrow icon to a boat icon on the chart screen?

[@MrBdogg317]

I just brought a dost that has 2 hds 12’s. Can I use the 3 n 1 transducer? Or a better question is which transducer can I use on my transom

[@BarryBell-q6b]

3& 1 works for sure I have it ? & active target? Idk about rest ?

[@MrBdogg317]

@@BarryBell-q6b I have the gen 3 will the 3 n 1 still work?

[@patsylvester825]

How do you set shallow depth alarm ? this was great -first time user PjS !

[@jacquieparker2009]

Can the sonar transducer be hooked up to the trolling motor?

[@fishmandan]

I am installing 2 HDS 9 lives that I recently purchased. The install manual shows the last 2 connections on the back to be a Blue and a Black. However my unit actually has 2 black connections. Are these the same? Also get hate mail over having fish ID set on the sonar by all the high brows but mainly troll with rookies and it makes it easier to know it is a fish and also can see what depth they are at quickly.

[@TK-kv1zb]

I just purchased a couple of HDS Live units. Could you guys possibly do a in depth video on the instruments page. How to build a custom instruments page with SOG, RPM, Water Temp, Oil Pressure, etc. and how to edit the page (add/remove instruments) Thanks!

[@ChrisWard-c7w]

On the left side of the screen is there a way to remove that stuff where I can get full screen?

[@adamandresen9911]

when you are in the split Left and Right side-scan (two side scans on one screen with sonar and chart) and go back to just side scan you will only have the left or right side scan and not both. And you have to go back and change it to left and right side scan. then your split will have a L&R and an L or R. Is this going to get fixed in an update?

[@djgmix916]

If I have a elite t2 9 inch.. can I use same power source and 3:1 sonar to connect 9 inch hdslive like swapping elite ti2 for hds live.. seems like same cable connectors

[@lowrance]

Yes, you can use same power cable and same transducer AI 3in1.

[@djgmix916]

@@lowrance thanks I picked one up last night bass pro / cabelas has a screaming Black Friday special! 899 for hdslive 9 and 12 inch 1899! Btw what size ram mount would you reccomend. Or plate. I noticed the plate for existing elite ti2 9inch won’t fit bracket on HDSLIVE 9 so need a bigger ram or bigger plate

[@Scott-qr5er]

Why does my chart(navionics ) only show the triangle without trail in chart mode?

[@billfloyd6661]

If I have a Live 12 at console and bow, and after I setup my overlays, favorites, etc, at the console unit, can I copy those to my bow unit without having to go through each page and re-set up?

[@bryantucker97]

Question. The user manual says the max number of panels a page can display depends on the unit size. What are the max # of panels for 7" and 9"?

[@lowrance]

Yes, the 12" and 16" can have up to 6-panel split screen, whereas the 7" and 9" have 4-panel split screen.

[@darnellmcneill8544]

Awesome video, quick question on these units, I got 2 HDS 12 live units from Bass Pro during the Black Friday sale in NOV. My cameras are not working and one of them are freezing up on 2D sonar. I was told that there are firmware/software being worked to correct these issues. Just looking for feedback for the correctness of this and steps I should take?

[@lowrance]

What cameras are you using? How are they connected? Please reach out to us via FB and send us your units serial numbers.

[@darnellmcneill8544]

@@lowrance my installers did the check when the installed them, I tried to contact your facebook page, just not I was on the correct page, my post was up then it disappear, i also try to send at direct message with no reply

[@lowrance]

We cannot find any information about your case. Please, send us a message via our Facebook page facebook.com/Lowrance/

[@darnellmcneill8544]

@@lowrance I did on yesterday, I was speaking with someone via messaging, sent them screen shots of my unit info, and was giving me some steps to investigate. They verify that my units are under warranty

[@jamesadams3487]

How do you set your unit to scan in deep water like over 1000ft in the ocean

[@roygalloway9006]

I have a Minn Kota Ultrex with a universal 2 transducer. What transducer type do I choose in the menu settings for the best results?

[@calvinfoster5245]

Question: I just purchased a Sun Tracker Fishin' Barge 22 DLX pontoon boat and need a fishing package. I am looking at the Lowrance Elite FS 9 with 3-1 Active Imaging Transducer. My question is what type of trolling motor do I need that will connect with the Lowrance Elite FS9. I need a 80 LB 24 V with I-Pilot (no foot pedal).

[@lowrance]

You can look into a MotorGuide Xi5 or a Rhodan HD trolling motors

[@billreid4597]

Thank you again Jeremiah lol had to watch this again, sooo much good info.

[@jessebrown9030]

Where is part 1 of this series? Can't find it on your page

[@lowrance]

Please follow the link to the Part 1 of the webinar. kzbin.info/www/bejne/d6vafmWQlNx4oac If you follow the link below you can view all the other webinars. www.lowrance.com/live/

[@jwschroeder804]

I turn the Spotlight scan on simulation to get familiar with a feature I do Not have. Now the home ALWAYS shows that feature even though I have repeatedly turned the feature off. Am I stuck with the nuisance?

[@georgevolyk7629]

what are the best settings for slow trolling?

[@fishernick2447]

Great info there thanks, quick question .... do you have your transducers still plugged in when playing around with the unit in the garage ? Can this damage the transducers at all ?

[@sailing.saltmates]

I personally always hit "stop sonar"

[@ronripley5652]

30

[@kevinokeefe3751]

Can this unit be fitted into a SCANSTRUT helm POD ? I’m worried about the gps module on top of the set , please help 🙏

[@RickSettle]

My Elite FS-9 won't let me use SideScan if Chirp is selected on any sonar page. Is this normal?

[@capt.lennymiller6524]

just watched this session and really enjoyed it. I'm trying to set up the dashboard screen with my Yamaha engine and I'm not seeing what you showed on your demo. Is a Yamaha engine compatible with Lowrance HDS Live? And I can't find any videos on your quick tips.

[@lowrance]

You will need to have a NMEA2000 engine interface. Contact Yamaha to double check if your engine is compatible for Generic engine data, ref. 000-0120-37 or with Specific engine data, ref. 6YG-8A2D0-00-00

[@daviddevries2698]

Can I put sog the upper left corner with temp and depth? If yes, how. Thanks

[@lowrance]

Yes you can indeed. With your unit switched on, short press the power key, the System Controls will appear, you can choose Edit Overlay from there.

[@daviddevries2698]

@@lowrance thank you very much!!!

[@chrisgrinstead7221]

I have 3 of these units and Would like to learn more about depth shading and proper way to set up

[@brucewalker1908]

Hi I have a Hooks2 Reveal 9inch Tripelnshot and Is the fish reveal setting automatic or is there a way to turn it on or off when using down scan. Having a hard time finding the settings. Thank you Bruce

[@LaGaLaG_DARWIN]

Hi, I have HDS 12 live, how can I display on my chart the compass ring especially when I’m on the water travelling?

[@dennisleese5211]

Great info I’m a west coast salt water fisherman hds live 12 / 3in1 transducer does this trans work ok in salt water

[@lowrance]

Thank you for using our products. Yes, the AI 3in1 transducer can be used both in fresh and salt water. Tight lines.

[@davidmccartney7577]

I can’t get “arch’s” on my New HDS 17 Live 7”🥴

[@butwurger3889]

is it possible to run 2 sonar screens. one with 80kHz and one with High Chirp? thanks

[@leonsvilla6079]

I like this lowrance HDS live. Can i use this unit in philippines?

[@lowrance]

Yes, but if you live in the Philippines, you will want to purchase the unit from your local area so that it works properly. Please check our site for a dealer near you. www.lowrance.com/dealer-locator/

[@leonsvilla6079]

@@lowrance oky thank you.

[@jameslovelace8958]

Fish Revel on Side Scan? Possible ?

[@kbarthurbroughton3187]

Why is my livesight keeps coming up saying NO SOURCE!! PLEASE SOMEBODY HELP ME

[@lowrance]

Please make sure both HDS Live and LiveSight transducer are running the latest software update. Send us a message via FB with your units serial number and contact details.

[@timdo5178]

My unit sideimaging line is too large how to adjust it

[@godsdozer]

How do you get so many fish on the screen inside your garage ? :)

[@dennisleese5211]

What kind of depth should I exspect?

[@lowrance]

What kind of transducer are you thinking of installing? It will also depend on that

[@troygoesfishing412]

How do I put color on my chart depth lines?

[@kenolswfski8862]

I have a hook2 9inch split shot it will not read the bottom

[@thebasswicker6294]

Great video thanks

[@davidkreutzer4742]

Spectacular webinar

[@dennisleese5211]

What kind of depth can I exspect?

[@lowrance]

What kind of transducer are you thinking of installing?

[@machappyday]

Love the information.

[@lowrance]

Thanks!

[@jackcahill8146]

How do sensitivity and noise rejection work differently ? How do you know when to adjust one vs. the other?

[@Lazzoboy]

How can I log a map/chart, and use it directly on the water. I dont want to upload it on internet C-Map Genesis. I want to use the map I made the same day, and I dont want to share the logging with no other people? Please answer.

[@Lazzoboy]

And not using Genesis Live, because the contourlines disappear when I am done mapping with it

[@chaddeem4544]

@@Lazzoboy You will have to pay for the pro version of CMAP Genesis to prevent others form having your logs or use Genesis Live. Unless you get a Navionics card with an actice subscription and use Sonar Chart Live. Those are the only options at this time that I'm aware of.

[@Lazzoboy]

@@chaddeem4544 Now I know that. Think it´s horrible that Lowrance have that. Sold both new HDS Live sonars and replaced them with Garmin. Now all my problem are gone

[@rabidmonkeypox]

Why did week 2 live post before week 1 live? Is lowrance coming out with time travel fishing technology?!

[@marks2387]

Always a smart ass in the mix

[@dvredleg9622]

Take my money!

[@frankbednarchek1481]

That was very informative thanks.If I would add a ghost trolling motor would I still need a point 1 or does the trolling motor know the heading of the boat?

[@Jcestanley]

I think homedude here quit or got fired cuz I haven’t found a week 3 yet....really enjoyed these two lessons.

[@lowrance]

Other webinar were produced after this. The 'week 3' mentioned in this video is referred to Angler's Lab webinars.

[@johndudlicek9750]

Great stuff! Where do I get week three and the rest of the webinars?

[@lowrance]

Thank you for watching it. The "3rd week" mentioned in the video was about angler labs webinars. You can watch all our others webinars on www.lowrance.com/live/

[@omg24]

Hi. How i can delete installed language pack? No way?

[@lowrance]

You will need to return the unit and it has to be disabled.

[@omg24]

@@lowrance return to Dealer?

[@omg24]

@@lowrance Consider adding a menu item to remove the language pack. This will solve various problems: when the wrong lang pack is purchased, when there is a need to install another lang pack, etc.

[@livinlifeat3mph334]

Wait where's week 3!?

[@lowrance]

Other webinar were produced after this. The 'week 3' mentioned in this video is referred to Angler's Lab webinars.

[@hakanvanli11]

Very good explanation. Thanks

[@crab445Hornet]

Hi when is lowrance getting a better livesight like garman ??????????????

[@grif72404]

how well does it work in shallow lake under 10 ft

[@michaelwilson2990]

Thanks

[@MrPearce11]

Anyone else notice his pupils? Thats me after a full night session on the water with no moon light.

[@dennisleese5211]

Even in salt water

[@lowrance]

Yes, even in salt water.

[@dennisleese5211]

For salt water

[@lowrance]

Our AI 3in1 is for both salt and fresh water.

[@TheSilverSurfisher]

LOL! Great Great Info.-Presentation.....(But why does he have that permanent Angry, Tired of this shht and Y'all are annoying me and I'm Grumpy so don't cross me face??)😅

[@davidmccartney7577]

WTF🥴

[@steveg2509]

Some people have that as a normal expression

[@dennisleese5211]

3in1

[@lowrance]

Up to 1000ft (300m)

[@richardgregory4111]

Good info but he talks to fast

[@anastasiakafetzaki142]

vfb

[@michaeldarby2242]

Might be the "best" but the customer service is the worst.

[@lowrance]

Michael, please send us a message via FB with your contact details and an explanation of your issue and the problem you encountered with our customer service.

[@alilabidi903]

I have HDS 7 Live , i have this message : Unit not valid for Use in this area.contact local authorized reseller for support , I am in Tunisia , what i do now

[@lowrance]

To have Geofencing disabled, you need to contact Mediterranee Services Tel: [phone]

[@alilabidi903]

@@lowrance oky thank you.