I want to paint my RC Lowrider 59 Impala. With custom pin striping. I learned something. TY
@TheLoc3862 жыл бұрын
Through the power of the KZbin algorithms, I just found one of my favorite painters on here
@ThinAirGraFx2 жыл бұрын
Thanks man. Much appreciated
@bleehole2 жыл бұрын
Ah yes the things on how to do the things. good shit sir
@chrispugh7519 күн бұрын
That's sick
@darrellrogers57032 жыл бұрын
Bad ass work there 👏🏿😎
@jeffcarter623111 ай бұрын
Very cool thx
@MikeVal13692 жыл бұрын
Really nice 3d effects with the shading!
@kathrynsmith533 жыл бұрын
Watching & learning from your videos as my best friend's little girl wants me to custom paint her Barbie car. I've all the supplies, getting ready to set up my spray/paint booth.
@ThinAirGraFx3 жыл бұрын
Glad your are finding it helpful
@michaelvandenhoy10213 күн бұрын
Awesome!
@ml20432 жыл бұрын
Learned so much. Thanks
@martyW3473 жыл бұрын
Outstanding work as always, your control on the shading is amazing. Thank you for your videos
@BigSteve_Gaming1872 жыл бұрын
Your voice reminds me of Farva's voice from Super Troopers. 😏 Very nice work...
@dohctorzc Жыл бұрын
Awesome breakdown! Thank you!
@davidmclaughlinstudios18542 жыл бұрын
Cool work, Scotty
@paulkennedy48423 жыл бұрын
Some very cool effects well done.
@ThinAirGraFx3 жыл бұрын
Thanks
@alonsonavarro21262 жыл бұрын
Beautiful work. 😍
@VictorRomero-c4j7 ай бұрын
Thats really nice work. Im just starting out in to the whole air brush depth paint schem
@shaunmcinnis19602 жыл бұрын
Nice work!
@vileasphunk77893 жыл бұрын
I've learned alot from these video. Thank You very much man.
@ThinAirGraFx3 жыл бұрын
I’m glad. I have more coming
@vileasphunk77893 жыл бұрын
@@ThinAirGraFx Honestly Thank You Very Much Man. I have a headache from learn so much yesterday.
@coursehome Жыл бұрын
That's beautiful love those colors combo Mark Tennessee
@Kustompaint20263 жыл бұрын
Badass custom paint!!!!!
@ThinAirGraFx3 жыл бұрын
ThAnks man much appreciated
@ThinAirGraFx3 жыл бұрын
ThAnks man much appreciated
@andrewdudson77502 жыл бұрын
Outstanding
@michaellucenti2272 жыл бұрын
Thank you for posting your video. I think a lot of good tips up. Working on a kitchen wooden table at the moment. I wish I could KZbin it but. Just not that savvy 😀
@ruggedrickrude19462 жыл бұрын
nice talent to have gr8 job
@ayonadventures3 жыл бұрын
Very nice work & attention to detail
@ThinAirGraFx3 жыл бұрын
Thanks
@dormaettu3022 ай бұрын
this is really nice, good tips
@r7kelley5532 жыл бұрын
Wow this is so freaking cool!
@vettemaniac22372 жыл бұрын
Absolutely stunning! Fabulous artistry.
@ManuelTorres-gd5jp4 ай бұрын
From an angle I see a box of eggs, great work
@frankm85332 жыл бұрын
Man awsome job!! I always wanted to be a custom painter since I was a kid next thing knew I was older and never happened. Looks amazing dude
@ThinAirGraFx2 жыл бұрын
Never to late
@frankm85332 жыл бұрын
@@ThinAirGraFx I wouldn't know where to begin. I have a buddy who does custom but he mainly only does roofs & hoods lowrider style but not full cars yet
@keepondoubletruckin84662 жыл бұрын
Thank You
@ttxela2 жыл бұрын
Fantastic stuff, I always use magnets to hold the lace but of course that only works on steel.
@danielgurulee123 жыл бұрын
Great video very insightful and many different uses great video all around and nice work as well beautiful work.
@eduardocontreras649 Жыл бұрын
Hi that was awesome to see you do all the patterns and candy's.thank you again.
@simoncarter6793 жыл бұрын
That’s a cool video. I really need to tape up a couple panels for graphics. I always find it confusing to see a completed panel and try to work it backwards to figure out how it was done. But this video makes it all really clear. Thanks for posting Mate!
@ThinAirGraFx3 жыл бұрын
It’s such a fun process when you get going. And not over thinking it is good
@yfz450pogo3 жыл бұрын
Got yourself a new subscriber sir!
@ThinAirGraFx3 жыл бұрын
Very very cool. Stay tuned for more
@mathewmaldonado35703 жыл бұрын
Nice work
@ThinAirGraFx3 жыл бұрын
Thanks
@andregrafia19143 жыл бұрын
excelente
@mindsfortin5892 жыл бұрын
Awesome!!
@WhiskeyTango683 жыл бұрын
I’ve been toying with the idea of only allowing white, grey and a accent color. Looking beautiful here!
@friendlypiranha7745 ай бұрын
Wow, I love it.
@staycruisingarage3 жыл бұрын
Looks amazing
@alessandrochiodo91863 жыл бұрын
right on subscribed man!
@cspro3music2 жыл бұрын
what up scott . its your boy picasso from lawtown . my lexus that i painted is total done smashed up . im working on a chevy camaro 1997 . ill keep in touch
@ThinAirGraFx2 жыл бұрын
What’s up man. Good to here from ya. Give me a shout anytime. If your still in the area you’ll have to visit the studio
@cspro3music2 жыл бұрын
@@ThinAirGraFx I'm still in town . I'll stop by the shop n check out your new artwork .....
@ELLeeOh3 жыл бұрын
👍👍from this guy
@katykab00m3 жыл бұрын
Wowowoweeeeee 👏👏
@anthonymeyer49352 күн бұрын
Maybe a dumb question but is this something you’d be able to to if you started with a darker base coat? Like a black or maybe even a dark purple then did the tape and patterns?
@mehmetsiranlioglu19252 жыл бұрын
Elinize sağlık ustam selamlar 🙏🙏🙏🙏🙏
@mariochavez1852 жыл бұрын
Just wondering if you have a video of the initial tape job, I’d kinda like to see how you got to the point of the beginning of this video.
@ThinAirGraFx Жыл бұрын
need to do one
@daranjavar9928 Жыл бұрын
Hey there. REALLY enjoying your videos. VERY educational. Appreciate all the instruction, advice, and oil tips to make jobs easier. Quick question…im respraying my motorcycle. Base coat, metal flake, and clear coats already done. Ready to sand and start some graphics with my candy colors. WHAT KIND of masking tape are u using to mask off the panels?
@SnailHouseProjects2 ай бұрын
what are did you use for the base color? is it Silver with flake in it? Sorry for the dumb question, but i am new to paint stuff and genuinely want to learn more about this
@georgelassier93372 жыл бұрын
wow fantastic job and it only took you 30 minutes
@ThinAirGraFx2 жыл бұрын
About two.5 hours for that part
@healing2gether3 жыл бұрын
WOW...Gorgeous!! Love everything about the design and application! Well Done! Where are you located? -Adam The New Woodworker
@ThinAirGraFx3 жыл бұрын
Just north or Boston Massachusetts.
@T3b_Custom9 ай бұрын
I hear some people saying they don't like the paintwork on the bags, is there a problem with the paint adhering to them ?
@moisesarriaga70692 жыл бұрын
Awesome work! Can you elaborate on y not to use the sg100 Inter coat clear . I thought the sg-150 was for flake and pearls. Also the trans nebula 00 looks milky in the can does it dry clear?
@ThinAirGraFx2 жыл бұрын
150 and 00 are pretty much the same thing. Yes as crystal clear as sg100 but unlike sg100. The 00 or 150 can go more then two coats because it had better binders so candies as well as pearls suspend better and you wont get the peeling it splitting that occur with ti much sg100 coverage. I know we did it back i the day but its not the way to do it now and hasn’t been for a while
@ashtonhart78288 ай бұрын
Is the black you are using to do the design outlines and shadowing, is it a candy black or just a regular black?
@ThinAirGraFx8 ай бұрын
Its black cut with come candy cobalt blue. I never use Black Straight on Graphics of Shadows. it makes if look Flat and Dead. I alwasy add i color tint and transparency to it.
@scratchcoderig10 ай бұрын
What brand of airbrush do you like best? I am getting back into it after 30 years.
@ThinAirGraFx10 ай бұрын
I use Iwata and for the most part have for 30 plus years. Always quality
@youhappyf0o6 ай бұрын
Hey nice work man. I must ask… what’s the paper tape sheet u have that’s white?
@ThinAirGraFx6 ай бұрын
It’s just transfer tape for vinyl application.
@youhappyf0o6 ай бұрын
@@ThinAirGraFx thanks man I found some yellow one that’s thin
@alirezanaghizade-sb8fv Жыл бұрын
Hi what is the base of paint that you are using with airbrush, is it oil based or water based?
@ThinAirGraFx Жыл бұрын
The one was house of Kolor solvent. But I also work in water based
@tonyfourpaws45113 жыл бұрын
I'm doing an old 68 ford truck. i remember an old book that was published that taught all of this but i can't remember it. any ideas?
@dannycoronel59522 жыл бұрын
Can you make a video on how to mix the candy concentrate?
@ThinAirGraFx2 жыл бұрын
I haven’t. It’s in the tech manual for HOK.
@ArtDaBarber619 Жыл бұрын
How much would a paint job like this cost? Great tutorial 👌🏾
@ThinAirGraFx Жыл бұрын
Lots of variations. I only did the graphics on this for a shop that did the base and clear. The artwork was around 2500 I think.
@ArtDaBarber619 Жыл бұрын
@ThinAirGraFx Oh, wow! I had no idea how much one can make doing graphics. How many manhours did it thake you to complete your portion? Btw, very nice work.
@leecallaghan Жыл бұрын
What do you use for the masking? The white mask
@ThinAirGraFx Жыл бұрын
The plotted mask was FBS blue. I also use Rtape comfom transfer tape for a lot of hand cut work too
@leecallaghan Жыл бұрын
@@ThinAirGraFx awesome thank you! Wish you had more videos. This paint job is unreal. I’m just getting started and learned a lot from it
Hey I was wondering if u sell the scales already cut ready to use if u do pls let me know TIA
@ThinAirGraFx Жыл бұрын
Unfortunately I do not. But will consider it in the future
@epifaniosantiago79272 жыл бұрын
where can you get the fish scale masking tape
@ThinAirGraFx Жыл бұрын
www.mackayfineart.com. there is also a link in the description to the specific file
@mikegranados19022 жыл бұрын
What kind of paper is the white one. ? I cant find the correct one
@ThinAirGraFx2 жыл бұрын
Which paper are you referring to?
@rmy159562 жыл бұрын
Did you used acrylic lacquers?
@ThinAirGraFx2 жыл бұрын
No. This was House Of Kolor Urathanes. Much better, clearer and more durable to work with
@rmy159562 жыл бұрын
@@ThinAirGraFx Thank you !!
@jeremymartinez9518 Жыл бұрын
Is there a part two or three to this video???
@ThinAirGraFx Жыл бұрын
Not to this one but I have many more on the channel and many more in the works!!!!
@reaganmayfield2120 Жыл бұрын
What paint are you using
@ThinAirGraFx Жыл бұрын
house of kolor
@reaganmayfield2120 Жыл бұрын
Okay rad
@aamantium12 жыл бұрын
What adhesive paper are you using on this?
@ThinAirGraFx2 жыл бұрын
FBS Blue mask and also just transfer tape
@ManuelTorres-gd5jp4 ай бұрын
Dragon 🐉 scales
@tammyjohnson6196 Жыл бұрын
I have a 1991 Lincoln Town car
@ThinAirGraFx Жыл бұрын
those are fun
@MickE983 жыл бұрын
meta jewel? is that micro flake?
@OpieIsWatching Жыл бұрын
Can you do lace over scales?
@ThinAirGraFx Жыл бұрын
might get to busy buts it’s worth a test
@LuizClaudio-yz7kp2 жыл бұрын
qual o nome desse spray de fixação da renda meu brother ??
@ThinAirGraFx Жыл бұрын
3M super 77
@Martin-bu7bl2 жыл бұрын
What airbrush is that for 14:26
@ThinAirGraFx Жыл бұрын
Iwata TH2
@MrBigleo253 жыл бұрын
what hind of paint should i get for rc car bodys
@ThinAirGraFx3 жыл бұрын
I use Createx Colors
@cappafpv2 жыл бұрын
Looking good man. When you get a chance check my channel tell me what you think. I’ve been doing some lowrider paint jobs. I haven’t got into the candy just yet tho.
@Southernrefinish88 Жыл бұрын
i know I can do this as ive been a painter for 15 years but I dont know if i want to. I dont think anyone would pay me what i want for this kind of tedious time consuming work.
@ThinAirGraFx Жыл бұрын
I get paid for every second. if your work is quality and the customer values it then you are all set. You just need to sell it
@dman455410 ай бұрын
So what the heck does snal scale and lace have to di w each other. No theme, just ghetto.