Bambu A1 vs P1P - Are These The Same 3D Printer?

[@halo7250]

Recently, I acquired an A1 and designed a substantial number of models in Fusion. Subsequently, I printed all the models on the A1 using an old spool of generic PETG filament that had been exposed to high environmental humidity. While encountering endless issues with my old Creality 3 V3, the A1 exhibited exceptional performance by producing all the models with remarkable precision. As a result of this experience, I have decided against purchasing another Creality printer, even if it is offered at a lower cost. Bambu Lab deserve the recognition, it really just works!

[@newstream2000]

Welcome to the club 👍🍻

[@lettuceman3848]

Old 3 v3?

[@LoyalMoses]

That is great to hear!

[@MarshmallowBoy]

"Back in my day we had to use masking tape, you kids and your bambu labs!" 👴

[@LoyalMoses]

😅💜

[@MarshmallowBoy]

@@LoyalMoses Just recently got my new A1, and its a godsend, my spent more time on my old printer fixing it than printing, and thats saying something because it spent a lot of time printing due to how slow it is, it was an anycubic i3 mega S i believe.

[@LoyalMoses]

Aren’t these new machines just incredible?! So happy to read this! 💜

[@adriandawkins5500]

What about the days we had to use a wall of filament to keep a print from warping from drafts without heated beds?

[@MarshmallowBoy]

@@adriandawkins5500 not printing with heated beds was crazy

[@STxFisherman]

So the Bambu Studio now has print quality settings, Standard, high q Quality and Optimal Quality. It would be nice to learn about the various quality settings, pros and cons, potential issues, etc. I enjoy your 3D videos as they cover topics that I find informative. Thanks for the great videos.

[@Spinall01]

I think only the layer height changes

[@LoyalMoses]

Layer height and speed / acceleration for some, I’ll double check.

[@LoyalMoses]

That is a great idea!!! I’ll do it! And thank you for the kind words.

[@paultisl1930]

It would be interesting to see a follow-up video where you did a similar print with multi-color printing to show how the different retraction distance between AMS & AMS-Lite can offset/surpass the acceleration benefit of the P1P.

[@LoyalMoses]

OH! That is a fantastic idea, especially for lengthy prints! I’ve saved your comment for a video!

[@Zamugustar]

This. The A1 does multi color a good 10% faster in my estimates.

[@jp9403]

I haven't been keeping up with 3d printing for a while, can you explain what you're talking about? What does the AMS help surpass?

[@HakanOnurDerici]

​@@jp9403P1S has faster print speed but AMS light of A1 has faster filament swaps. They're curious which printer will be faster overall in a print with many hours with lots of filament changes.

[@barryhanna4434]

The hotend swap on the A1 series is also a big bonus

[@LoyalMoses]

Heck yeah!

[@BloodSteyn]

I recently got an A1 AMS Combo, and I have to say, it's amazing... although it costs around the $800 mark over here in South Africa... which sucks so bad. So far it has been amazing, it prints PETG like neither my K1 or B1 could imagine.

[@LoyalMoses]

$800 is really high! Wow! I am so glad you like it! 💜

[@bsmello]

And what about here in Brazil... Almost $1.000 A1 AMS Combo.

[@3DandTeePrinting]

Hard to explain without using them but the P1 series is more Industrial Feeling like a well built machine that has to get work done. The A1 feels fun and entertaining to print with. Kind of a Grown Up Printer vs Tweener Printer kind of feel. Both are great. After 4000 hour combined on our 2 P1P's (now converted to P1S's) and A1, I can say It's all about preference between these machines. If you compare the A1 to P1S it's not a fair battle but the P1P that's a different story.

[@LoyalMoses]

Exactly! They’ve marketed it that way too. The A1 being a great entry point and the P1P being a manufacturing choice.

[@OldManJimmy1]

I ended up with the X1C after the cord issue with the A1, I still miss the A1's nozzle changes and tunes you can make it play and customize the sounds.

[@LoyalMoses]

Nice upgrade too!!

[@C0mfortCruise]

So happy with my A1, what a leap forward it was compared to my Ender 3. On one hand while I appreciate the skills I learned having to troubleshoot and upgrade my Ender, If the 3D printer market ever wants to gain further adoption from new users we need more printers like this that lower the barrier of entry.

[@LoyalMoses]

Awesome!

[@lostinseale]

I have the A1 with AMS and love it. Moses, my question is have you tried lowering the acceleration to see if the print quality are the same between both. Also would that make the P1P quieter. My A1 is in an enclosure to eliminate drafts. The back is open and i monitor temps so that is not an issue for me. I need it to be quite then fast. Great information, like always.

[@LoyalMoses]

You could definitely lower the acceleration and change the results for sure. They are both incredibly capable machines.

[@SVCprints]

I’ll say I bought an A1 first. Loved it so much I bought a P1S. At first I was bummed. Layer staking was not as good and the ringing. But after 100 or so hours my P1S now prints better. I bought a second P1S and that was the same way. Almost like they have a break in period. I think the carbon rods eventually wear in a bit. But just my thoughts. :) they are both great printers!

[@LoyalMoses]

Wow!!! Now you have a fleet of awesomeness!!!

[@JuddMan03]

The ringing might be due to the belt tension, so a wear in period would make sense.

[@SVCprints]

@@JuddMan03 idk because when I first got them I adjusted the belts and got them to ride center on the pulleys. Who the heck knows, all I know is two different printers and they both got better after a bit of printing. Which is nice because at first I was mad I spent the extra on the P1S. It wasn’t bad by any means. Just not as nice as the A1.

[@marcellussaunders4200]

I have the A1 with the AMS lite and I have the X1C with the AMS and really I’ve had less trouble with the A1. If I had it to do over again and knew I wasn’t ever going to print with exotic filaments, I would’ve bought two A1s, one day I might have to print with a more exotic filament so I’m not sorry I bought the X1C. But if I ever buy another one, it will be an A1. I am not in business and I don’t need superspeed compared to the P1. However, if I was going to do business, I would have only P1 because time is money.

[@LoyalMoses]

Thank you for sharing! Great choices too!

[@TheChoyamoya]

Great comparison, thanks loyal Moses

[@LoyalMoses]

My absolute pleasure! Thank you for watching and the kind words!

[@MrKrisSatan]

Picking the A1 for the hotend swapping, I need to use a 0.2mm nozzle

[@LoyalMoses]

Awesome!

[@TheFotoGuys]

Like switching out the whole hotend assembly on the p1p is pretty easy and quick as well. 2 screws and then a couple of cables..

[@zackj997]

Would be great to see a comparison of a taller print since the higher up it goes on a bedslinger usually increases the chance of various artifacts.

[@LoyalMoses]

It can, but they do well compensating and they calculate the weight of the print in grams and adjust.

[@F.DoctorGT03.]

Superbe vidéo comme d'habitude , effectivement je possèdes également les 2 machines et les qualités d' impressions sont similaire , avec une p1p un peu plus rapide , de belles machines dont je ne suis pas près de me séparer , a bientôt...........

[@LoyalMoses]

Thank you so much!

[@lwo5601]

Great ! Thank you

[@LoyalMoses]

Very welcome!

[@sux0r]

another great video! thanks for being so informative

[@LoyalMoses]

Thank you!!! Also, you gonna be at the show on Friday?

[@sux0r]

@@LoyalMoses wouldn't miss it! Love the shows and I always try to be there on time =)

[@LoyalMoses]

Awesome! Love seeing you there too! Good luck!

[@TripleJAu]

Would be interested to see you do a A1 vs P1S

[@LoyalMoses]

If I did, what should I print?? 🤔

[@firebloomstudios140]

Makes no sense in any way as the P1P is literally the same than P1S without enclosing and minimal other features. It all depends on what you are printing. I have around 30 BBL Printers in my farm and 12 are X1C, rest is a mix of P1P, P1S and A1 Mini. I skipped the A1 cause for me there is no benefit over a P1P besides the pricetag. And for really cheap prints i use the A1 Mini which comes at 199 . For example I print Carbon Fiber Material and PC etc on my X1C´s, P1S I use for non Fiber Materials and with special buildplates for PolyPropylene. P1P mostly prints TPU, PLA and PETG where you want to have a good cooling and you avoiding an enclosed chamber. A1 Mini print cheap stuff where the printbed is more that sufficient. I will upgrade them all for automated printing once Jobbox is releasing the A1 Mini kit.

[@LoyalMoses]

It’s not about what makes sense to you or I. There are people that are choosing printers and are struggling to figure out which one is the right one for them. Some are having trouble deciding between a machine that prints basic filaments and a machine that is enclosed and prints more exotic filaments. For some it will be the difference in AMSs. Whatever the reason, that’s okay, we’ll be positive and help them out.

[@mobilechaosyt]

P1P without AMS vs A1 with AMS at the same price goes hands down to A1 combo. I had both but preferred the P1P since it was better for slow motion video when using an external camera, however i don’t have an AMS for the P1P and it is more cost effective just to get the A1 combo given my use case. I do feel the P1P and P1S have their place especially when you are printing taller objects.

[@LoyalMoses]

Awesome!

[@RBallarddesigns]

I just added 2 A1s to compliment my P1S. I have big hands. The screen on the A1 is very accurate and responsive for my big fingers.

[@LoyalMoses]

Awesome! Then you are very accurate with those big fingers! Typing in a wifi password was hard for me!

[@RBallarddesigns]

@@LoyalMoses haha! Good times! Thankfully that usually is a one time thing then. Keep up the great work content!

[@LoyalMoses]

Thank you!

[@dark2233]

Hello I have recently entered the world of 3d printing, I have several projects and I am in a big dilemma. Now I have A1 and I have to buy another printer. I'm undecided whether to take all A1 or P1P, I only print in PLA and that's it, I'll have to make statues and figurines. From what I've read, the Core XY ones are more accurate in height? is it true or A1 gives the same result as P1P? Did you find P1P it's a much better quality print/same quality ? For me, print time doesn't matter Thank You

[@BuilderInStyle]

Can you do a1mini vs qidi x smart 3?

[@LoyalMoses]

A1 mini vs X Smart 3? I don’t have the Smart!

[@BuilderInStyle]

Ah... I have seen a lot of reviews for both and can't decide, seems to be the only 2 choices for small fast printers

[@86Carrera911]

Would still like to step up from my Ender 3 printers, but I've got other financial obligations at the moment. Will be interesting to see what changes over the next year or so.

[@LoyalMoses]

Everything is changing quickly!

[@ajmckay2]

I wonder if people realize just how quiet the A1 is... Even enclosed, the P1S/P1P is so much louder than the A1 which is basically like ambient noise. I could fall asleep in the same room as the A1 while I can easily hear the P1S sitting in the next room over.

[@LoyalMoses]

Amazing tech.

[@FireDragon3D]

Great video. Ill point everyone to this video when i’m asked this question. I prefer corexy myself.

[@LoyalMoses]

Awesome! Thank you!

[@theianmce]

I have both and love them both

[@LoyalMoses]

Very cool!

[@koifish1le996]

After upgrading to a P1S Combo from an Ender 3 Neo, I find that the P1 is consistently limited by material. That's in contrast to the Ender, which was limited by hardware. What I mean by this, is on my Ender, i would often find myself upping the layer heights to get the print to finish faster. This is because it could only print 120mm/s max, so any filament with a VFR >10 was being limited by the printer itself. But the P1 is the opposite. It can print practically any filament i can throw at it, with exceptional reliability and quality, at that filament's max VFR. Yes, I understand that i could have purchased upgrades for the Ender i.e upgraded hotend, better cooling, direct drive, bigger nozzle etc, but by the time i buy all of that and tinker around and fine tune it all, the P1 does it all for almost the same price and then some! I still have my Ender, keeping it as ole' reliable, maybe even try out ender NG. Being able to play with the big guns (exotic filaments, multicolor, automation, Maker World, etc) is so much fun and definitely worth the price.

[@LoyalMoses]

Thanks for sharing!

[@AndroidA258]

hello man, remember me? you asked me to post videos of my voron printing fast, its in my channel, didn't manage to tag you for some reason its in the shorts section

[@LoyalMoses]

Awesome! Very cool!

[@michaelj3971]

Just for fun I downloaded the elephant and sliced it for my Prusa MK3S+. Using the standard 0.2 layer height, it sliced out to well over 13 hours printing time. Sigh.

[@LoyalMoses]

Crazy how fast machines are changing!

[@BillyRybka]

Add the end card to the video haha. No video pops up

[@LoyalMoses]

It's there on the TV and on the Mac where I am at now!

[@jimmy206030]

my a1 mini has strogling with unstable first layer issue and hanging is bad, my x1c never meet those problem.

[@LoyalMoses]

Run the calibration on it again and make sure the firmware is up to date! Clean that build plate again, very well and if you like, apply a little light layer of glue stick!

[@jimmy206030]

@@LoyalMoses It seens like filiment leaks while auto calibration when I print with PETG, the filliment leaks makes z offset too high,when I print PLA it usually fine, even thought it still prints,but it is anoyying when you can see your first layer lines special with designs need to show first layer

[@jimmy206030]

@@LoyalMoses my friend who runs print farm also meet this problem too,so he deside to sell all the a1s and buy p1s to make more stable result.

[@LoyalMoses]

That’s definitely not normal behavior! And there will be a clear, logical answer for it. 3D printing isn’t magic, and we’d love to help you solve it!

[@chriskwakernaat2328]

should have put the p1p at the same acceleration speed and reprinted it.. just to see if it matters. bed slinger vs head slinger. because now it's an unfair comparison.

[@LoyalMoses]

So many people get confused… this isn’t a technical comparison, it’s a user experience comparison of what you would expect from the machine with the default profiles.

[@chriskwakernaat2328]

@@LoyalMoses so maybe do it in another video? i am quality over speed myself. so if the p1p does a nicer job at the same speed as the a1...

[@LoyalMoses]

Definitely! We could do it in another video.

[@realmeee]

filament support are different though . ⚡⚡ for A1 ⚡⚡⚡⚡ PLA, PETG, TPU, PVA: Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended for P1P ⚡⚡⚡⚡⚡⚡⚡⚡⚡⚡ PLA, PETG, TPU, PVA, PET: Ideal ABS, ASA: Capable PA, PC: Capable

[@LoyalMoses]

Yes, that’s listed on their website.

[@aerohard]

Bed slingers will always suck at rendering tall objects at reasonable speed.

[@LoyalMoses]

Sort of. They actually take weight into account along with input shaping, but high speed tall prints will definitely be problematic.

[@makie1467]

P1 vs new K1 SE

[@LoyalMoses]

That’s exactly why the P1P showed up, because I have the new K1 SE here in a box, videos soon!!!

[@makie1467]

@@LoyalMoses super interesting what machine is more reliable. maybe you can do super big prints on them...

[@LoyalMoses]

I’d love to do some larger prints on it!

[@Lost-Orbz]

You are just trying to address the elephant in the room right?

[@LoyalMoses]

Oh. Wow. 🤣

[@BackDaws]

So you did a print comparison but didn't use the same settings, nice one 🙄

[@LoyalMoses]

You have trouble understanding simple concepts - let me elaborate... Oh... wait... smaller words. Let me explain. This is a user experience comparison, NOT a technical comparison - it is the results you would expect from each printer with default settings, which is how 99% of 3D printer owners actually use their printers. Also, why would I slow down or handicap a faster machine to compare against a slower machine?! That makes ABSOLUTELY NO SENSE.

[@troywalker8078]

It seems to me that Bambu Labs has taken over the top spot as the go-to reference machine. Bye Bye Prusa.

[@LoyalMoses]

Crazy how fast everything can change.

[@bensnipes7288]

Got my A1 combo a couple weeks ago. Love it! Total game changer. Started with a Neptune 3 Pro about a year ago. I learned a lot with that machine. Learned slicing, learned maintenance, learned A LOT of tuning. I put a lot of effort into tuning that machine to get quality results. I didnt mind and wanted to learn. Now i just want to print, and the A1 does that.....perfect...every time! No more messing with Z offset, leveling issues etc. The phone app integration is so handy as well as having the camera. It truly is a game changer for me and its been running non stop since i got it. If you want to LEARN 3d printing, get a Creality, Elegoo, etc. If you just want to PRINT, Bambu 100%

[@LoyalMoses]

I’m so stoked for you! They are incredible machines, they just work so well! Thanks for sharing this!

[@m6r6m6]

You might be the first one that explains that the p1p can be controlled solely from the app and that the old screen is not a deal breaker . Great review by the way! Sub

[@LoyalMoses]

Thank you! 💜

[@BelfastBiker]

same s for the A1. Got the A1 yesterday, and I forgot to print something last night before bed, so I did it from my freaking phone in bed. Amazing.

[@vincentparent2851]

I got the a1. No ams. I regret that. I didn't know much about it. And I love it. Had my first nozzle clog and a piece of filament get stuck in the gear. I panicked. Thought it was broke. Bambus website has the walkthrough. Took it apart cleaned it. Lubed it. Back up and running. I love it

[@LoyalMoses]

Fantastic!!! Glad you got it fixed!

[@NitroKryptic]

@@LoyalMoses mine had a belt-tightening notification less than 30 hours in got it fixed by following the guide and they made it super easy by just typing in the error identification

[@snootywinner]

Multi coloring is quite wasteful. You can always paint it.

[@chriskwakernaat2328]

@@snootywinner painting waists a lot of time.. printing is hands off.

[@NitroKryptic]

@@chriskwakernaat2328 Agreed

[@Happy3dprinting]

I have both, maintenance and working on the printer the A1 is far easier than the p1p. If abs and pc are needed then the p1s is a no brainer choice. You could choose any of the Bambu lab printers as a first time new to 3d printing beginner machine, but the A1 would be just ahead of the others just for accessibility and ease of maintenance. Great video

[@LoyalMoses]

I agree with you 100%! I don’t think you can go wrong with any of them, and that’s the problem with trying to recommend one. They are all so freaking good!

[@W98Dragon]

I bought my a1 during first week of July, I had told myself "PETG will be good enough". I loved it, printed non stop, and I immediately got into making my own functional stuff, repair pieces, even for friends and neighbours... and then I ended up realizing... and now here I am with an A1 and a P1S aswell, which in 5 days that I own it has already 40 hours of print time on abs!

[@LoyalMoses]

Isn’t that incredible?! They are making this so dang accessible to everyone, I love it! Congrats on your machines!

[@dtibor5903]

ABS prints fine on A1. Enclosed i get about 40-45C air temperature, ABS prints fine unless you have something large. Printer is capable working at this temperature without any issue.

[@Happy3dprinting]

@@dtibor5903I agree it can be done, I used to print pc and abs on my Creality Ender 3 s1, but if you got an enclosed printer it’s just a little easier and ofc to vent those fumes safely.

[@marcelzuidwijk]

Wouldn't it be fun to do this comparison again (extend) and print both printers on same acceleration? So both on 6K to match default A1, and both on 10K to match default P1 :)

[@LoyalMoses]

We could do that, that could be fun for sure, max out speeds or slow them both way down! Choose some REALLY difficult models! 🔥

[@marcelzuidwijk]

@@LoyalMoses would love to see that (could do it myself too ... but I'll leave it to the pro's 🙂)

[@EngineerWilky81]

That would give some good examples of how the prints turn out on different styles of printers when both printers are using the same speed settings.

[@AlexSwavely]

no "let's talk about the elephant in the room"? I'm disappointed in you.

[@LoyalMoses]

Alex. I’m going to consult with you for all future puns.

[@TinTalon]

Another great video. Speed is never an issue for me so I slow down my printing for better print quality with less artifacts. I have an A1 mini and a Flashforge AD5M core xy printer (with printed enclosure) I really like them both. Both print fantastic, both are great value. I will say that with the faster core xy (without making any adjustments) will shake the crap out whatever it is on when doing infill and the A1 mini doesn’t really do that. Slowing both of these down (outer wall speed, infill speeds and travel speeds) to about the same it would be hard for me to choose which one I like better. If I had to choose I would pick the A1 mini, only because the AMS. I know it’s wasteful, but sometimes you just want that multicolored option (my core xy does not have a AMS option). One thing I like that you showed is that even printing with a Bambu, not everything comes out perfect. I couldn’t agree more though that Bambu makes fantastic printers and you can’t really go wrong choosing one.

[@LoyalMoses]

How did I not see this comment?!? Thank you TinTalon for taking the time to share this. Remember my old studio bench, they shook it like mad and I agree, can’t choose a bad Bambu machine. I sure hope you are liking your new Neptune!

[@JayEm16]

9:32 also the P1P was out of the box right? Assuming, you didnt tune it. So after tuning could be as good or better!

[@LoyalMoses]

Just upgraded firmware when it prompted and hit print.

[@kidri007]

I just got my A1 with ams lite about 10 days ago. love it. quiet and so much faster then my old ender 3.

[@LoyalMoses]

So awesome! It’s such a great machine, I wish more people knew!!!

[@RobertGlazier]

I've had my A1 Combo for over seven months, now with no issues at all. I did replace the power cord, ever though I didn't need too. Just being safe than sorry. Nice comparison.

[@LoyalMoses]

Awesome and thank you!

[@EngineerWilky81]

I got the P1S. When I was looking at printers in July when Bambu was having their anniversary sale, I watched a number of videos about the differences between bed slingers and core xy printers and due to where I was planning on having the printer I chose to go with an enclosed version. There were a few reasons for getting the P1S over the P1P: 1. Breezes/Drafts: I have an evaporative cooler instead of an AC and the office, where the printer is located has a window that is usually cracked to help alleviate air pressure and the printer is in the flow of the air coming into the office and going towards the window, so I didn't want to have to deal with issues when there's potential drafts when the evaporative cooler is running during the summer months. 2. Humidity: Also because of the evaporative cooler, I didn't want to have to worry about humidity being an issue with printing during the summer months. 3. Exotic Materials: I also wanted the ability to potentially try out some of the more exotic materials that require printing in an enclosed printer without having to buying another printer or making an enclosure for it. I also liked the idea of the AMS over the AMS Lite, so that was another item that drove me over the P series instead of one of the A series printers. Would be interesting to see how the P1P and P1S are compared side by side in print tests to show the differences between being enclosed versus open. Great video, been loving them since I came across your channel almost 2 months ago.

[@LoyalMoses]

Thanks for sharing!

[@lyianx]

Just found your channel and one of your videos introduced me to the Qidi Tech X-Plus 3 printer. But going though your video list, im not seeing hardly any videos on it and many videos focusing on Bambu printers. Is that mainly because they can print in multi-color and the Qidi one cannot? If not, what is the reason?

[@LoyalMoses]

The X-Plus 3 has been in a couple of videos, and we probably have 4 or 5 QIDI videos. But we have a lot more Bambu printers, and a lot more of our audience owns Bambu machines. Multicolor printing is also popular and Bambu does it the best.

[@buildersmark]

Van sneaking in and doing the unboxing. Both these printers are just great user experience and so simple to get running. Bambu just IS the go to printer. Great video.

[@LoyalMoses]

Isn’t that cool! He did the unboxing and got it all set up for me, and he’s doing his own content as well.

[@RussDahlberg]

*THANK YOU* for finally addressing the elephant in the room!

[@LoyalMoses]

Hahaha!

[@norcal6181]

Lets talk about the elephant(s) in the room...

[@LoyalMoses]

LOL! I know... I totally missed that opportunity!

[@BuildPrintRepeat]

I have a couple of the bamboo printers and the A1 is my least favorite. It is definitely one I won't buy again. I have the first one not the one he's showcasing and I hate it. It sits on the floor. I'm trying to figure out what to do with it. I try to do a return and get the money back to get a p1p or p1s and it never happened

[@LoyalMoses]

Sorry to hear that. Mine is the original one as I said in the video. It was the one sent out before launch. It’s best if you articulate why you won’t buy something, in-case there are others that might be interested in reading your comments. Most readers skip over comments where people “hate” something, they’d rather read objective experiences, otherwise they just discount the comment as just another hater. Every legitimate experience is helpful.

[@islandseeker1260]

Looks like both printers have some serious elephant foot issues... (ba-dum-tish)

[@LoyalMoses]

Oh my gosh! LOL

[@marcellussaunders4200]

I printed the same elephant on my A1 and one of the ears did not print very well and fell off.

[@LoyalMoses]

Oh no!

[@QuickMind]

Is that Starscream, g1 skywarp and jetfire in the back? ❤

[@LoyalMoses]

I love it when people spot them! That’s Jetfire G1, Thrust G1!

[@QuickMind]

@@LoyalMoses my bad, the g1 seeker was far away and looked black and purple not burgundy, love some g1 vtol cone head seeker 😍 all hail Starscream

[@LoyalMoses]

🔥🔥🔥

[@coinopanimator]

Can you connect a regular AMS (and the hub) to the A1?

[@LoyalMoses]

Unfortunately no, it is meant only for the AMS-Lite

[@coinopanimator]

@@LoyalMoses :(

[@JayEm16]

Mornin LM! Nice have video watch while i prepare myself to work lol

[@LoyalMoses]

Hey! You are first again! 💜

[@JayEm16]

@@LoyalMoseshahaha i get to work at 5:10-5:15 EST everyday. So when i walk in and get to my lathe and theres a LM vid i get watch while i get mentally prepared to throw chips😂

[@LoyalMoses]

Fantastic! Be safe and have an awesome day!

[@fstiv5716]

please, please do Prusa MK4 v Bambu Lab A1

[@LoyalMoses]

That could be a good one!

[@cyaneo7]

Thank you, Moses!

[@LoyalMoses]

Anytime! 💜

[@LoyalMoses]

You’ll love it!

[@n00blike]

MK4S vs P1P would be great to see

[@LoyalMoses]

Yes!

[@BojanSusic-qi4qn]

Both are good but the P1P is in a weird position right now as it when it came out, the A1 probably wasn't even planned. Now as it stands the A1 is obviously the better pick for the money and for the better technology as it has the pressure advance and the flow calibration built into the print head as well as easier nozzle changes and simpler maintenance if a clog happens. As someone who runs a print farm you'll encounter issues with the A1 around the 850h mark, then it's better to recalibrate the printer or you'll slowly see print quality degrade(at least that was the case for me). I've seen other's run P1Ps with more success but as I also have X1Cs with similar issues makes me wonder should I consider the other competition if I can't figure out the reliability fall off before I bulk order more printers.

[@LoyalMoses]

We recalibrate whenever we move it between studios for filming. I spoke with Bambu about the P1P before they sent it over (sent it specifically for comparison content), and they told me it remains VERY popular for print farm operations. It’s such a good, clean, powerful machine.

[@efremtommasi1387]

Would be nice to share the X1C/P1S AMS with the A1 but they're not compatible... I understand Bambulab marketing strategy but the AMS light is not good for me

[@LoyalMoses]

A lot of comments lately, people prefer the AMS Lite, which I thought was interesting.

[@7h314m]

Great comparison, very interesting. It would be great to see a comparison between the A1 and the A1 Mini, as although they are almost identical, the bed inertia of the A1 Mini makes it more suitable for layers below 0.08, just like the Z-axis guide rail and the type of linear on the Y-axis. In my tests, the Mini has given me better results with 0.06 layers, although I didn’t maintain a consistent methodology since I didn’t start with the same spool at the same time and temperature, with the same humidity and ambient temperature. Best regards, and congratulations on the channel!

[@LoyalMoses]

Thanks!

[@u2cantsee]

I think the A1 did a better job than the P1P. Parts worked a little better. It comes down to price and features. Both are excellent. For me I like the encloser like the X1 Carbon or K1 Max in which I both own. That way I can do anything. I would love to see a larger encloser like 400x400x500mm build plate. Maybe one day. Love this video.

[@LoyalMoses]

It did great!

[@adriandawkins5500]

NGTL, as much as the screen moved on the P1P is honestly sad, unless it was just my phone, but it's a decent machine regardless of if I agree with the company or not

[@LoyalMoses]

🙄

[@jamescassidy2098]

I bought 3 Elegoo 4 max printers about 5 months ago and have had nothing but issues with them total nightmare. I decided to buy 2 p1s combos they arrived yesterday super easy to set up and connect to my phone and pc. I've printed a bunch of things on them 0 issues so far but still early days I've had them running less than 24 hours but so far my 4m Elegoo printers look like a joke in comparison. my thoughts so far are they may be a bit more expensive but Bambu lab printers just work and if your a complete novice like me they are perfect.

[@LoyalMoses]

Thanks for sharing!

[@Playboi3304]

Wonderful review but I am considering one of these for my 13 year old daughter. This will be her first experience with a 3d printer which if the two would you suggest for a beginner?

[@LoyalMoses]

Thank you! The A1 is going to be the least intimidating and is more intuitive with the touch screen. Congratulations too! I hope she loves it! My daughter has the A1 mini her room, and loves it, so the A1 would be very similar and produce fantastic prints.

[@paulmilne3038]

It’s been reviewed and confirmed compared before hasn’t it. They are different printers. Would be more interested in P1P versus X1. Though that has perhaps been done as well.

[@LoyalMoses]

I suppose there should only be one iPhone video on KZbin then.

[@Bluntedco.]

i have a question that you may be able to answer. so i made a dedicated 3d print room and i added a 6" inline fan to the wall pulling the smell outside of the room and i bought this Husky 4 Tier Garage Storage Shelving Unit to put a couple A1 with ams lite. i plan on enclosing all around and the bottom of the top shelf so as if it had an enclosure and i wanted to do this to not get Breeze drafts and i would prob enclose the top part when printing cf and more abrasive materials that you can do with the p1s since it has an enclosure. i figured if i create this enclosure on the top rack for the a1s i can print the same materials the p1s can print since the a1 has hardened gears and nozzle you can add. Does this seem about right? being able to print the same type of filament as the p1s and having that enclosure to not get breeze draft from the inline fan pulling out too much air/smell from the room? the room itself has a vent that will open up if it has negative pressure so that humidity is not a problem. the room next to it has a ac running with cool air. Am i onto something or will i mess anything up like humidity issues inside the enclosure i make by doing that enclosure to the top shelving section of the rack?

[@LoyalMoses]

The only limitation on enclosing the A1 is to make sure you keep the electronics open to the air, they can overheat. As or moisture, if you live in an area with high or moderate humidity, you'll need to reduce that moister somehow or keep filament sealed away from it. I think you have a pretty cool idea and I'd love to hear how it turns out.

[@knatt99]

I bought the P1P at sale, and I am very happy. The reason i bought it and not the P1S or the p1S combo is that i am a noob in printing and want to learn. But didnt want to have to buy another printer for printing ABS and so on. SO i bought the P1P so i can buy the upgrage kit to "P1S". And then a friend ended up sellig me his A1 Mini combo and i use it more than the P1P because of the AMS Lite. So i will be selling my P1P and just buying a P1S combo. But hey, you live and learn.

[@LoyalMoses]

This is just awesome! Thank you for sharing! 💜

[@rjsvids]

if you dont need the fancy material ( normally for a house user you dont ) just buy the A1 with AMS Lite . Way cheaper . its awsome

[@josephploettner7327]

Anyone know where to get the plate id (arco?) stickers, I need a cold one :) Ty

[@LoyalMoses]

🤔

[@Spinall01]

Hi, I have a P1s and two A1s, all with AMS. And I come to the same conclusion, the P1s is faster printing but the filament changes are much faster on the A1. The P1S is much noisier. As for the screens, although the A1 is better, I rarely use them, all because of Bambu Studio. Both are great printers, although about the cameras, I'd rather not comment on them haha.

[@dark2233]

Hello I have recently entered the world of 3d printing, I have several projects and I am in a big dilemma. Now I have A1 and I have to buy another printer. I'm undecided whether to take all A1 or P1P, I only print in PLA and that's it, I'll have to make statues and figurines. From what I've read, the Core XY ones are more accurate in height? is it true or A1 gives the same result as P1P? Did you find P1P it's a much better quality print/same quality ? For me, print time doesn't matter Thank you

[@LoyalMoses]

Such good machines!

[@rockels_journals]

Why going to put effort in a head to head comparison between the P1P VS P1S? Both are already heading to become dated printers with the A1 already on the shelves and the X1C/P1S followup just around the corner. Both have equal hardware and the only difference is that 1 is enclosed and the other is not. The P1S already seems to be on a permanent sale which already makes the price difference between P1P and P1S a no-brainer. There's just a €100 diference between them. Upgrading a P1P with the P1S kit will you even cost €200. That's double the difference of getting the P1S right away.

[@LoyalMoses]

Very simple. I know which one i’d buy, but there are people that can’t decide which one they might want. Remember, not every video is for you. It’s also about the content and the story I choose to tell. Maybe someone wants to have a customized enclosure and the P1P is the one that provides that for them. Rather than be anti-content, choose to be supportive of more content for those who need or want it. It’s better for our awesome industry and hobby.👍

[@mwinner101]

@@LoyalMosesThanks for the video. 👍

[@buildersmark]

​@@LoyalMoses I would absolutely do custom panels. The Borg cube, or a custom Mario question block, would be the first two I would consider making for it.

[@LoyalMoses]

So welcome! Thank you!

[@LoyalMoses]

I want to do the Mario cube!!!

[@JustinNewton1117]

Flashforge Adventurer 5m if i am in that price range by far. Best bang for buck right now, arguably.

[@LoyalMoses]

I would like to compare one!

[@JustinNewton1117]

@@LoyalMoses please do good sir

[@wesleyvanzwol4916]

The Bambulab A1 VS the Anycubic kobra 3

[@LoyalMoses]

YES!!! I need a Kobra 3 and I’ll do it!

[@XavierMcBeth]

I would love to know the difference between p1p and p1s. I'm being told to get the p1s because it's better.

[@LoyalMoses]

Awesome! This is great to hear, because we are already planning that video!

[@theromeog]

"BuT LoYaL - If YoU UsE GlUe On ThE BeD iT's BeCaUsE yOu DoN't KnOw HoW tO PrInT RiGhT" -- Sigh - I use Nano Poly and never had a Failure. - Love it and was on your recommendation

[@LoyalMoses]

Haha! I hear that so much! Thank you for this, gave me a laugh this morning! @visionminer is amazing stuff! 💜

[@JuddMan03]

I got a P1S for the enclosure but if it weren't for that, id have got an A1 hands down. Changing the nozzle is a bit delicate on the P1 as you have to unplug fragile connectors. The AMS also seems way over-engineered compared to the AMS lite.

[@EngineerWilky81]

I agree that the changing of nozzles is much simpler and less prone to breaking things with the A series printers over the P series and X series. It's a bummer that you have to change out the entire hotend to use different nozzle sizes. There are 3rd party hotends out there that make changing simpler and quicker by only having the change the nozzle and not the entire hotend. I pre-ordered the new Mako Hotend that Slice Engineering is making for the Bambu printers as I like the idea of being able to change out the nozzle for the different sizes and not have to change the entire hotend. The AMS may seem a little overengineered, but I like how it's essentially a dry box so you can have the 4 spools ready for printing at anytime especially if you're worried about any humidity issues. The AMS Lite does have the benefit of working better with non-bambu filament spools as compared to the AMS, I liked the thought of being able to potentially have up to 4 AMS units for a single printer mainly for the purpose of having several spools ready to be used at anytime more than being able to do multi-color prints.

[@LoyalMoses]

The design on the A1 is just SOOOO good!