LS Swap HP Tuners Turbo tuning. OS Swap, initial start settings.

  Рет қаралды 15,042

The Driveway Engineer

The Driveway Engineer

Күн бұрын

Пікірлер: 24
@stivic923
@stivic923 3 жыл бұрын
Wow, that's a funny looking terminator x.
@bigredracer7848
@bigredracer7848 3 жыл бұрын
12👍's up DE thanks for sharing
@roadmasterk6019
@roadmasterk6019 3 жыл бұрын
Very impressive, this upload...
@ThelifeofBigJody
@ThelifeofBigJody Жыл бұрын
What map sensor part number do I need 411 pcm finna do lsa supercharger swap on my 6.0 😊
@salvatorehayes2753
@salvatorehayes2753 2 жыл бұрын
My Vehicle Will Actually Run At Negative Timing Advance (or Spark After Top Dead Center) . But I'd Say Mines A Special Case. It's Got A Really Small Turbo For A 5.7 Hemi. Can Make As High As 10PSI Of Boost Around 2400 RPM - 2900RPM. The Timing Has To Be Really Dead In That Area To Keep It From Knocking. But When It's Really Cold Even That Low 2-3Deg Of Timing Is Still Too High. It Knocks And Pulls Timing And Runs In The Negatives. I've Actually Turned The Timing Into Negatives To Make Knocking Go Away To Make Sure It Wasn't False Knock. It's Runs But It's A Very Odd Sensation I Guess haha. Like It Makes A Ton Of Boost But Doesn't Really Do Much With It hahaha
@russelljackson7034
@russelljackson7034 3 жыл бұрын
Right on
@TheProchargedmopar
@TheProchargedmopar 3 жыл бұрын
👍💪
@TwinTurboLsx
@TwinTurboLsx 2 жыл бұрын
Can you choose the 2 bar RTT option if you have a 3 bar map sensor? Will it malfunction or only allow tuning up to 2 bar? Thanks for the info!!
@TheDrivewayEngineer
@TheDrivewayEngineer 2 жыл бұрын
It's not the total, it's everything in between, the scaling will be off. They all read 0-5v, so the data points will be off. If you're not using a MAP that lives in the handheld, you have to use a laptop and the software to correct it.
@TwinTurboLsx
@TwinTurboLsx 2 жыл бұрын
@@TheDrivewayEngineer ok. Just asking because I have a 3 bar map but sounds like 2 bar would be easier. Maybe I’ll just buy a 2 bar and save it for later. Thanks for the help!
@nathankeene803
@nathankeene803 3 жыл бұрын
Have you done a video making a wideband work on HPtuner without the pro features?
@TheDrivewayEngineer
@TheDrivewayEngineer 3 жыл бұрын
No, I have a pro. And I don't have a MVPI 2
@boost1728
@boost1728 2 жыл бұрын
kzbin.info/www/bejne/h3qWZJaVfcp7adk
@romero.4089
@romero.4089 3 жыл бұрын
Hey y’all iam in a fb group and it’s going around that I should do a carb 5.3 for my fox but iam on a budget and don’t see how it’s cheaper or overall better than staying efi
@TheDrivewayEngineer
@TheDrivewayEngineer 3 жыл бұрын
It's not cheaper or better
@paulsjdavis
@paulsjdavis 6 ай бұрын
Do you do any tuning for a local yocal?
@TheDrivewayEngineer
@TheDrivewayEngineer 6 ай бұрын
I don't do any tuning at all, I gave the HP Tuners device away a few years ago
@paulsjdavis
@paulsjdavis 6 ай бұрын
Bad idea to use it for a turbo lq9 build? Any better software now?
@benwhisman1232
@benwhisman1232 5 ай бұрын
​@@TheDrivewayEngineer are you done with turbo stuff?
@shawnwimberly9294
@shawnwimberly9294 3 жыл бұрын
Just that easy huh?
@TheDrivewayEngineer
@TheDrivewayEngineer 3 жыл бұрын
It's not ready to hit a dyno at WOT, but it will start and run
@shawnwimberly9294
@shawnwimberly9294 3 жыл бұрын
That's pretty awesome.I've got the wideband and the HP tuners... i don't have any cool turbo stuff yet though
Things to know about HP Tuners for the beginner.
15:13
The Driveway Engineer
Рет қаралды 113 М.
Gen 3 LS Swap Tune DIY with HPTuners
24:51
Matt Sanford
Рет қаралды 32 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
Cheapest/easiest way to add boost to your LS engine?
17:31
The Driveway Engineer
Рет қаралды 36 М.
HP TUNERS 2 BAR OR 3 BAR OS CONVERSION FOR GEN 3 LSX P01 AND P59 PCMs
19:55
My LS Swap Mistakes That Cost Me Thousands
9:38
Bad Larry Motors
Рет қаралды 20 М.
Back to Basics HP Tuners LS Swap initial start tune how to
34:43
The Driveway Engineer
Рет қаралды 61 М.
Guide to Tuning VE on early GM Cars
27:54
ChopperDoc181
Рет қаралды 63 М.
How to get your cam swapped LS to start and idle in HP Tuners
5:49
The Driveway Engineer
Рет қаралды 36 М.
Teaching Mr. Sam how to tune using HPtuners!
20:12
Matt Sanford
Рет қаралды 18 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН