LS460 front brake pad replacement.

[@Backfire10]

Were you going to show your work or is that on a different video ?

[@jimmymolinaro7554]

Very neatly laid out, good narration, good camera work, but,,,,,,,,,,,,,,,,, NO REMOVAL PROCEDURE!!

[@cajackson3770]

Not a good video… he didn’t show us as he did it he did it off camera then showed the end result

[@HypeMyParty]

I would love to buy u a tripod because the purpose of a video is to really show the work not just explain then fast forward but good effort seeing it was 2 years ago

[@johnnyglexus5730]

Haha. I hear you. I had plans back than but never got back on the video train. I hope to again. When your new you have nothing.

[@akkordlord91]

Haters gonna hate, thanks for your time and for sharing! Helped me...​@johnnyglexus5730

[@nwo6926]

Hey Johnny, just saying thanks 4 posting!

[@triniboyful]

All great until you skip over the removal process. I thought it was about the whole proceedure, but I guess not. It's just all you talking and not really showing any of the proceedures. You waste a lot of time talking and not actually showing the proceedure.

[@iamomat9309]

Turns out you need to change the little cable on the passenger front and passenger rear on both ends to make the “check brakes” go off

[@flyty9241]

He didn't install the top clip each side jad two clips top & bottom

[@moreno3662]

Any info on how to replace the factory subwoofer

[@johnnyglexus5730]

Believe you have to remove the seats so you can get under the rear package tray. Is yours busted?

[@moreno3662]

@@johnnyglexus5730 the subwoofer rattles like a busted speaker.. found it new online but dont know how to install it...

[@johnnyglexus5730]

@@moreno3662 I have seen a couple other videos and they removed the seat. Search ls460 subwoofer replacement.

[@moreno3662]

@@johnnyglexus5730 👍👍

[@nopjack7278]

What's up with the naked back clip? You removed the brake wear sensor line....it goes through the back clip with the loop in the middle. Bro seriously, you just wasted money on new pads...the chatter was probably from the clip not being properly secured on the brake pad shim. FREE TIP: always recheck your work and take pics BEFORE you dismantle things when you're unfamiliar with how to do it.

[@johnnyglexus5730]

Yep thats what happened. Must have overlooked it the first time.

[@nopjack7278]

@@johnnyglexus5730 good to know

[@johnnyglexus5730]

Second thought the early Gen 4 only have pad sensors on the passenger sides. So this view on drivers there is none or a connector to add one. I bought this car almost 6 years ago and the brakes were the first thing i tackled. That rattle happened after and i chased all the other parts than came back to redo the brakes. After this time the rattle is gone.

[@nopjack7278]

@@johnnyglexus5730 good deal

[@richardstarr9223]

@@johnnyglexus5730 I have an '07 and wear sensors on driver's and passenger's side.

[@BasedSwaghoe]

How did the rattle sound ? Mines would do it at slow speeds and turning full lock

[@johnnyglexus5730]

Very much at slow turns and if i hit any bumps . All gone now.

[@BasedSwaghoe]

@@johnnyglexus5730 oo mines would sound worse when it’s hotter out I think

[@johnnyglexus5730]

@@BasedSwaghoe Mine kinda did if it was hot and very cold. Usually at first but than calmed down the longer i drove it.

[@BasedSwaghoe]

@@johnnyglexus5730 yup new brake pads and rotors for the front being ordered as I type

[@TheAlexAdventures]

You didnt show how to remove anything 😂😂😂😂😂

[@richardstarr9223]

Bro I hate to rub it in and hopefully you don't take it that way buut.... You just totally spent money unnecessarily so replacing brake pads that still had what looked like 75% of their life left to 'em. 50% at the very least. Hopefully you saved them and maybe you can put them back on once these new ones actually, and I mean once they are LEGITIMATELY worn out. You saw what was causing the chatter, and regardless, you surely saw that the old pad and new pad width were damn near the same.

[@johnnyglexus5730]

I planned it that way i think the brand i had put off a lot of dust so i wanted to start over and so far all is good. Thx

[@525HP]

Jesus Christ. A bunch of talking. Show what you do

[@johnnyglexus5730]

After using all OEM the rattle is gone. Also remember to use brake quiet on the back of pads.

[@roberth9737]

You turn the camera OFF during the actual work... Not helpful

[@bilge77]

no video on breakdown or reassembly.......not useful at all

[@bigpoppiification]

too much talking... and you don't show how you removed anything, you just talked.

[@marcusmccall6059]

U need to actually show your work not just explain the job.

[@akkordlord91]

If you watch the video, you hear him say "there's other videos that show you EXACTLY the process". Go watch one and quit cryin!

[@stantoncrohm626]

Video missing the most important parts- the removal and installation. Useless video

[@johnnyglexus5730]

Sorry. Kinda hard when all i use is an iphone. I hope to redo it again later.

[@YusufshoevAziz]

Dude talks more then shows

[@champ10nishere]

This isn't a how to SMH your talking and not doing a thing 😂

[@johnnyglexus5730]

Well its been a few years But i tell you these are the easiest pads to change. Remove wheel and retaining clips. Pull pads press pistons back install new pads. I recommend replace hardware with Toyota brand really stops the break chatter i was getting. Not much to show here.