Polaris IQR 800 on the Dyno at Jaws Performance Ep #18! PowerModz!

[@MrBrapbraaap]

man that was sweet watching those big carbs breathing at over 8400 rpm!! thanks for that view louie

[@IRONMANDAN1965]

I LIKE THE HIGH TECH 3/8 EXTENSION THROTTLE PULLER

[@XxnorcoriderxX]

Awesome video! Sweet build. Greg really knows his stuff. Would love to visit that shop someday

[@twofacetony9721]

PowerModz wow i wish i could have a sled like that because i drive a old 1989 polaris indy trail 440 and it breaks soo often i would do almost anything for that kind of sled

[@f.t.w8645]

I think YOU guys are great! eh... Love what you guy's can do you teach people,and make awesome vids!

[@no1garbologist]

LOL!! You look like a beaming little boy on Christmas morning when you first get to jaws and open their door. I'm stoked for you. Great Videos!!!!

Makes me miss my old IQr, luckily I have it inked forever :)

[@Mxgary22]

Strolling around in the cold in a tee short sleeve shirt, true Canadian

[@MrGuitarbike]

I probably wouldn't watch these videos if you didn't say eh.. Your Canadian accent makes you so much more relate-able, just like living in Saskatchewan again.

[@PowerModzOfficial]

thanks........eh!

[@Gazooo29]

I think it's everywhere in Canada, I have lived in Ontario my whole life and use eh. You don't even think about it,just like talking to folks from the queens ny or boston.

[@dakotareid1566]

Gazooo29 where in Ontario

[@nathanoldford9618]

Bentley Beckley iil

[@jamesryan4599]

Great work again

[@rager522]

Nice as usual Louie I second Quinns comment THE LITTLE RED DEVIL rocks! Very informative thanks

[@NatePMalone]

Can't wait to see the hill drags!

[@robpilgrim4481]

Greg Balchin, it's been 10 years, you look great buddy! I was at least as excited as Hobie the first time I showed up with the first Snow Hawk 600HO

[@EvanCaron]

came together wicked! good job

[@bobpunter7090]

Wish they would make this into a tv show

[@carlyrosesnest8681]

Louie it's time you go visit Rich daily at dyno port he's the dude to get a fine tuned pipe from and you can see the love of his work in how well his products perform and enthusiasm into the product the dude's got records and it shows big time don't get me wrong Jaws performance are great but if you're going to spend that kind of money you might as well get the most out of it and he runs real Dino tests like these guys great video!!!

[@movingearth3726]

carly Connors pretty sure he’s not going to come to upstate ny for that you do know where he lives right ? Plus he has all the connections right where he’s at down the road rich is a great guy and so are these guys there no different

[@carlyrosesnest8681]

@@movingearth3726 I'm only speaking from experience I have a custom built iqr800 and had a built jaws pipe and then had a pipe made from Dyno port and he did better and I loved it much more nothing bad to say about jaws but Dyno port was better and felt more pull in the mid range and high end I didn't Dyno it but you can feel the difference and Rich is very humble but he is straight with you

[@movingearth3726]

carly Connors did rich take your sled ?

[@carlyrosesnest8681]

@@movingearth3726 I went to him

[@Gazooo29]

Damn this sled looks massive,wow

[@sgburn42]

Amazing video's on the IQR 800 Mod. Has anybody notice how much he looks and sounds like Christoph Waltz, the actor from Water for Elephants? Anyways keep up with these excellent Vids!!

[@johndillinger3851]

Awesome sled !!!!! Hey Louie quick question.. I have a 2001 Polaris 800 Le twin . what can I do to get better fuel milage ?

[@brandonquenneville7330]

Arent you from the speed channel. This guy is professional!! Awesomeness

[@denecree8396]

Awesome, that dyno makes your tuning way easier. lol..

[@sgburn42]

Now that the IQR 800 has been dyno'd, are you going to have a final episode perhaps a test drive to show off the final product or where are you at with it???

[@takesomenames7003]

you should do a 500ft snow drag sled build wit a Polaris 680 ultra or a 700 xcr ves or 800 xcr ? that would be awesome! !!!

[@Gloggen98]

Can't wait to see the VK un-stuck it ;)

[@lukefindlay3576]

Hey Louie that is one sick sled. Are you planning on taking it to the mountains? Will there be any more videos of it in action on the snow

[@chase123456ist]

Boy, some of the people on here have absolutely no personalities.

[@MartyMotorizedMayhem]

Looking good and sounding good.

[@darrenmh700]

After the clutching and any other do-dads are installed you should let us know the price of the finished sled I'm really interested to know, considering the gear that its running.

[@MartyMotorizedMayhem]

Looking and Sounding good.

[@TheSomewhere68]

sweet............ its going to braaaappp. great video..

[@mik_maccc]

pretty cool build. why does it sound like its stuttering and sputtering on lower rpms?

[@44rdonnelly]

Are you worried about the A/F ratios being a little off once you put the airbox on or are you going to be putting pods on? That was pretty awesome to see down the carb throats with it running at 8k+ rpm.

[@tommythepooh]

Hey Louie,I was wondering what would be the best choice between a jaws trail can vs a MBRP ?? thanks in advance Tommy

[@bilalkachif]

Awesome!! Now tuurbo that beast and it would be the meanest machine in our galaxy :D

[@GardenNewbie]

Gorgeoussssssssssss sled!!! love it!!

[@mathiaspettersen3813]

I expected about 150 hp form that awsome sled (same hp as 800 RMKs). What about RK Tech big bore when you blow the engine (as you probably will)? How many ibs is the dry weight, i know Pro RMKs are 417 ibs, but i think this is far lighter.

[@JDog72MC]

I love powermodz!!

[@quinnadamarczuk8006]

I have to say Louie (THE LITTLE RED DEVIL) Looks ,& sounds fan funkin tastic!!! , I think it will make you very happy,though it should. I think you will miss the reverse, but sacrafices have to be made. Now don't wreck it , enjoy it ! Now Video , RIGHT?

[@hummuqtuq]

Well you weigh the finished product? How heavy do you think that is? 430-400?

[@brianprivate5913]

hey Louie I'm building a iqrr as well I have the cfi 800 in it .what did you use for a stator ?I'm running carbs as well .also what jets did you end up with I'm looking for a starting point . also your afr was 12.8 but that was with open carbs so why didn't you dyno with a air box . btw my biggest mod will be the power modz stickers going on it .lol

[@ohaimingfu]

My curiosity wants to know how much it weighs. Very nice, clean looking sled. Great job! :)

[@iowamtnrider6960]

You do all tis high performance work to all these sleds is it worth the risk of having it be unreliable? But other than that these things are awesome!

[@freshkryp69]

Velocity stacks.. put them on the carbs and youll gain.. Look at the reversion!

[@user-iz7zy7rx9t]

I thought the stock polaris 800 put out 150hp.... this is a race engine and still puts out 150? are the polaris stock numbers inflated?

[@prostockultra5722]

It's a piped 800, it's also no longer Direct injection but carbureted. Cute, my 2001 XCR 800 made 164 on the Dyno in 2002, and since then it has gotten a set of VForce Reeds and leaner jetting has been thrown into the mix. I'd bet it makes 170 on a lean tune... As Louis says, it's just a number.

[@cdnbearb]

That is crank HP

[@glenholmgren1218]

@@cdnbearb yeah , this is a chassis dyno - those #'s that Louie got are to the snow .... Track HP, not measured at the crankshaft

[@badcatzracing7756]

@@glenholmgren1218 this is actually hooked to the engine where the primary clutch would be so its crank hp

[@K1DTC]

You do some great work man! Have you ever done anything on a early 2000's polaris edge 800??

[@robertdavis6708]

What do you think the price will be on his pipe next season?

[@franknewcomb5299]

what were you getting before the pipe and the timing adjuster ?

[@jfbouchard9126]

How much $$ a complet build like that can cost ?

[@HopOFFmyGlock]

Well that was badass.

[@lukefindlay3576]

Hey louie what do you think would be causing my belt to slip on my 2013 Polaris 550 iq shift

[@milkman2591]

Belt deflection?

[@Justin_sisti]

I hope you broke that motor in before you dynoed it or did you not have too? great video cant wait to see it run

[@PowerModzOfficial]

yes of course

[@breadman32398]

looks like the side panels could use some vents. other than that, it's perfection.

[@PowerModzOfficial]

coming!

[@GardenNewbie]

breadmans still driving fan cooled sleds? lol

[@RICHIE_RICH89]

Sick sledd I really want to know what this dynos at .well louie give me a number come on.sounds like a fricking indie car.

[@MrMedicAdnan]

I want to buy a sled soon, don't know much about them. What is the best sled I can get for about 5-6K? I live in MI and we get a decent amount of snow...

[@leviarnold2513]

A Yamaha phazer or a 440 ski doo rev

[@jackrossman3565]

Do you still have this sled if so why haven't you rode it lately

[@ketchupbowl4397]

I looked for an iqr for 3 months then I finally seddled for a prox 700

[@Spartan1234ish]

Very informational...

[@Tristanhart77]

Love this sled

[@buttmunch682]

new ski doo 800's have 164 stock?

[@trevermarden9631]

I love you videos

[@slimjim119]

that was awesome

[@jones50139]

my 2001 500 xcsp runs aqt 8600rpms with about 105 hp? very fast 500 stock

[@JAKDRZR]

Just a thought but with that track that you said is pretty soft isn't that going to hurt you in the hill drags??

[@PowerModzOfficial]

yes it will - run what you brung!

[@clarknawrocki3851]

snowmobiles are the best

[@spindelkuk]

How much does it weigh? looks super light!

[@leviarnold2513]

562 pounds

[@stephen9944]

more like 362

[@milkman2591]

What do you do if you stay out too late with no headlight?

[@laceyrr88]

wonder what your rev would have dynode before and after the big bore kit ?

[@PowerModzOfficial]

would like to have tried but dont have time.

[@NorthstarRiders]

Sick!

[@silveradoblue327]

wow love the nice pipe

[@Leakingboom]

what does the IQR weigh in at dry??

[@brysonpfishing6740]

pawer modz what all the parts that u used on the track

[@kennybouvier6455]

How long is the track on this iqr

[@dylanheise9655]

Louie is there a way to put a speedometer on an IQR?

[@PowerModzOfficial]

Dylan Heise gps on your phone

[@malcolmryan9738]

What do u guys think about twin pipes on a pro x 800

[@AffirmedPie]

What is the name of that song for the outro

[@Matt-ge3ix]

Why couldn't you drive it?

[@teamvoltage7891]

How much does it weigh

[@the.russianbear]

Don't you mean "Ep #18!" ? Good vid though!

[@thachosenjuan216]

What kind of polaris 800 engine is in it?? doubt a liberty.

[@traxx228]

They are all liberty engines.

[@trevermarden9631]

how do you put a snowmobile on a traler

[@matthewolt2973]

wow.... my 1996 ski-doo summit 670 put out 129.9..... that's a little 670... that thing is a mod 800! what the heck did Polaris do?

[@PowerModzOfficial]

the 670 HO is a great motor, things have changed since then - fuel quality, emissions etc. all that equals less power.

[@matthewolt2973]

true

[@MillerTime-406]

what happened to video #18...

[@PowerModzOfficial]

fixed - thanks!

[@gexkid]

Total weight?

[@KHSBikesCo]

Now numbers don't lie on a dyno, 150hp is a good amount but what year engine is that? Because the 2014 Polaris 800 rush with the Liberty 795cc stock, says it is a 160+ hp motor. So if this motor is a newer motor similar to that, You seem to be losing Hp with the Jaws setup on it. It would be cool if you had the stock setup on it and dyno'd both to really shut up all the controversy on pipes.

[@TheBCSledder]

Agreed I wouldn't trust Polaris's numbers too far though, just sayin'.

[@PowerModzOfficial]

Advertised hp figures:)

[@TheRick2130]

160+hp - weight of the machine - friction - air density and etc = "140+hp" maybe

[@TheCuttingtorch]

Lack of fuel injection is holding the motor back, bottom line.

[@metalmulisha963]

the 727 in my iqr is rated for 150hp..should keep up no problem with the 800

[@Name-vg3fu]

I got 162.2 ponies out of an cat crossfire 2010 800 ltd and its stock

[@daxjutila654]

U should do a mod on a 2002 tundra 300

[@legitskilz901]

so fucking cool

[@draye1011]

That is a nice sled, but my stock Ski Doo 800 is 152 horsepower???? I think that bad boy was closer to 160 hp if you ask me...................

[@billywindows]

Love how easily exposed the know nothings are in the comments.

[@NorthernRiderOffroad]

How did this video get 1 thumbs down? Lol

[@ganggang4039]

You must have some money eh?

[@patrickkeating5509]

Beauty sled

[@brandonquenneville7330]

Trust me you want to sub this channel

[@kjmahanna4973]

My 2009 ski doo etec 600 makes 132.6 horse power with a tuned pipe and nothing else you guys only got 30ish more horsepower than my etec out of an 800 that's not the greatest.

[@shaunamackeigan9267]

ye

[@joeneault785]

149 is that it? fuck the old f7 700 made 140hp

[@maximeveilleux165]

wheres the snow minnnnnn come on booboo

[@Snowmobileman68]

stock arctic cat 800 makes more hp

[@123789timothy]

+Joshua G advertised hp is different then track hp just like advertised hp in a car is different then wheel horse power

[@LogicModding2003]

I'd rather have a snappy sled with lower hp than a sled with more hp

[@PowerModzOfficial]

+Logic Modding (RGH Corona) how about a high hp sled that is snappy?

[@LogicModding2003]

+PowerModz that is what I dream about

[@ehenn28]

Joshua G "stock" arctic cats have turbos

[@stoffes]

U noobs stare on the numbers u dyno and get a reference then tune and get higher . It could be 165hp on another dyno who know

[@dylanheise9655]

Haha ya but like a legit spedo