LSSimple Small metal pulley kit

[@joserodriguez2623]

Will this fit my ls 5.3

[@MurphyWallace]

Yes sir. Tell me a little bit about your build... I can spec you a perfect kit

[@joserodriguez2623]

Nothing to major btr stage 1 cam with Holley shorties and an ls6 intake manifold

[@MurphyWallace]

@@joserodriguez2623 what ya going in? Doing ac?

[@joserodriguez2623]

Going in my nbs 03 I’m doing a v6 to v8 swap with 5.3 4l80e transmission. Yes with ac

[@MurphyWallace]

@@joserodriguez2623 our lssimple kit $225 for power steering and alternator. To help on the ls6 intake get a 98 camaro water pump and our water pump spacer kit$60. For ac we have our lss ac comes with new compressor its $550

[@MurphyWallace]

Since it inception we have modified our small metal pulley set up on truck spacing so you can press the pulley flush... fbody spacing has the install ring.

[@OhMar1210]

Would I be able purchase that spacer that comes with the Power Steering Pump Pulley? I picked up a kit used but it didn’t come with the spacer. Thanks

[@MurphyWallace]

The ring is a install tool for the small metal power steering pump pulley. Its not a spacer. Its to press the small power steering pump pulley 1/4 inch past flush.

[@OhMar1210]

@@MurphyWallace thanks for the response. I’ll make a 1/4 ring.

[@MurphyWallace]

@@OhMar1210 you can use a 3/4 boxed end wrench and lay the boxed end on the pump shaft after pressing flush and use it to press past flush. Keep an eye on it and leave just a business card thickness between back of pulley and power steering pump seal.

[@OhMar1210]

@@MurphyWallace Thanks! Appreciate your time 😀

[@OhMar1210]

@@MurphyWallace worked perfectly! Thanks for all you help! 😀

[@ReyesRay]

what size spacer is that little tool taped? i lost it

[@MurphyWallace]

Reyes Ray I can send ya one. Its 1/4 inch . You can use a 3/4 boxed end wrench and press it just shy of touching the seal.

[@ReyesRay]

i emailed you

[@anasasisxenophontis]

how well does that bracket hold up under belt load from a blower?

[@MurphyWallace]

anasasisxenophontis We use it with out LSA kit. It ties into the passenger side with a crossover plate. Very strong.

[@MurphyWallace]

With our

[@209chevymon]

Is this lssimple small metal pulley kit still available and will it work for/with a spaced ls2 water pump on a lq4

[@MurphyWallace]

Yes it's on our website. Www.lssimple.net go under truck spacing kits. The small metal pulley is a drop box option. Use the ls2 tensioner also

[@209chevymon]

@@MurphyWallace thanks murph for getting back to me definitely need this 👊

[@MurphyWallace]

@@209chevymon my pleasure