Lund SSV Fishing Boat

[@Clint_the_Audio-Photo_Guy]

We used to rent this model Lund up in Canada on the french river as a kid. Many memories in this hull. Spent 10+ hour days in it for 10 days at a time each Summer, when the "Big One's" were sleeping, haha. The rentals had old 20 or 25 hp Merc motors though and none of these accessories. The one without the floor always was faster because it was lighter. With the Bimini top and outriggers it looks like a much more expensive boat. Like a mini Alaskan open water fishing boat. As a kid, my dream was to get one and put a 50hp motor on it and a steering wheel. I thought that would be awesome. Now at 43 years old, I'm thinking about it again now that I have a truck that can pull it. Cheers.

[@jamesscarrow1181]

Very well thought out. Appreciate the time it took for you to share your experience. Thank you.

[@shuswapoutdoors]

Cheers James

[@joesebastian3036]

*We tried this out finally yesterday and it worked awesome! **enjoyable.fishing** recommend it’s we put it on our 16 foot aluminum boat and trolled with it. We didn’t catch anything but it was still fun and worked awesome! Can’t wait to use this baby again and hopefully reel in a big ole fish! Very easy to install and set up.*

[@robsteve7043]

Nice job. Love the enclosure!

[@shuswapoutdoors]

Cheers Rob. Game changer!

[@farmerstwist]

Bought a SSV-14 with Yamaha's new F25C this year and am very happy with the purchase. Have watched most of your videos a few times over,very nice set up.

[@shuswapoutdoors]

Should be a great boat for you! Change anything up on it yet? And thanks for watching!

[@farmerstwist]

No modifications yet. I added a 40lbs Minn Kota which is underpowered in the wind. I have a 2.5hp Suzuki i use on my canoe that i might try as a kicker. Is your Honda a short or long shaft?

[@shuswapoutdoors]

Long Shaft. Not sure if a short would work very well.....

[@deuces2k]

It was great seeing the progression of your mods to this one. Just wanted to say nice job!

[@shuswapoutdoors]

deuces2k thanks! Hopefully it helped a few people out with their own mods!

[@eddydye3215]

Excellent video. Well thought out boat.

[@shuswapoutdoors]

Thanks! It has been a fun project!

[@islandapparel4225]

Excellent video bro, I’m purchasing a 2021 Princecraft 16’ and had planned a very similar build, seeing yours done was just was I was looking for, thanks for sharing a no nonsense vid.

[@shuswapoutdoors]

No problem good luck with your build!

[@Moondog9322]

Really nice boat and setup. I enjoyed it!

[@shuswapoutdoors]

Thanks!

[@TheSagerider]

Thanks for sharing! Very good ideas for diy guys and well thought out. :)

[@jdb48]

Great job on your modifications

[@kevinw1287]

Like the top with the front and sides! Great for foul weather.

[@shuswapoutdoors]

It sure is

[@hhhhh-bz5ue]

Sweet set up bud!

[@MichaelLyons-h4i]

Awesome boat really love the canvas. 5:37 maybe you were just trying to do this quick but you really want to zip that zipper down to the keeper and not let it rely on the zippers to hold it together, that most certainly will ruin either the zipper or the zippie. 😉

[@shuswapoutdoors]

😃

[@tewksburydriver8624]

Nice boat. Where did you get the mounting brackets for the seats?

[@shuswapoutdoors]

Cabelas, it's a common bracket for boats

[@tewksburydriver8624]

@@shuswapoutdoors .., thanks, it swivels I assume, and do you like them?

[@shuswapoutdoors]

Yep, I'm happy with them and would buy again

[@GregorBlacksmith]

This thing is awesome. I have a 1984 wc14 that might be on its last legs and am thinking a SSV-16 done like this would be the perfect upgrade and replacement.

[@shuswapoutdoors]

It is a fantastic boat!

[@carlgangl6360]

I think it’s great what you’ve done with your Lund. I inherited a 85 Mr. Pike from my Buddy that passed. He took it apart to redo the floor so I’ve got a mess to fix. Do you have plans you would share?

[@georgeturcu5537]

Just awesome. Looks badass

[@shuswapoutdoors]

Thank you

[@Polack-ml9fh]

Setting up a an ssv now, just came across your video. You’ve done a great job, Nice setup! Still have the boat?

[@shuswapoutdoors]

I do and I absolutely love it!

[@thorn11]

I noticed on the starboard side, you put the downrigger ball holder ahead of the downrigger pedestal, yet on the port side, it is behind. Was it so on starboard side, more clearance for seat, but on the port side, more clearance for kicker handle? Thx so much.

[@shuswapoutdoors]

Exactly. I needed room for the kicker handle on the port and room behind the seat on the starboard side. It's only 6" difference between the two. Doesn't affect anything.

[@thorn11]

Thanks so much! Doing lots of mods and upgrades to my blue Lund SSV 16 - can't wait to get it all ready for summer! Cheers.

[@shuswapoutdoors]

@@thorn11 awesome! Good luck with the build

[@PoppaChris]

Excellent Video. really helpful. thanks so much for sharing.

[@shuswapoutdoors]

thanks!

[@heatherprosseda6316]

Can you please share where you got your bimini top and the front and side curtains. We pick up our ssv tomorrow and that's exactly what I've been searching for. Your boat looks awesome. Thx

[@shuswapoutdoors]

It's all custom-made. Any canvas shop will be able to make you something similar.

[@heatherprosseda6316]

Actually I found your link. Hoping it's not too pricey, but looks worth it.

[@terencehall7630]

Hello, nice boat! Just wondering what make your Bimini cover is and where did you buy it? I am on the Shuswap as well, in a 14’ Lund WC. Thanks, Terry

[@shuswapoutdoors]

Had it custom made in scotch creek

[@lilworts]

@@shuswapoutdoors what was the total cost?

[@shuswapoutdoors]

Can't remember. I think it was $1000

[@mitchfricke436]

that is pretty cool, what kind of Bimini top is that? never seen one with front and side curtins. would love to get one

[@shuswapoutdoors]

I had it custom made. It is a fantastic upgrade

[@mitchfricke436]

@@shuswapoutdoors i have got to get one, did you send them the bimini top or did they do the whole thing

[@shuswapoutdoors]

The canvas shop is 10mins from my house. They needed the entire boat to make it

[@raypod6967]

Nice set up

[@shuswapoutdoors]

Thank you. We are happy with it!

[@thorn11]

Where did you get those rubber net holder clips / mounts for your landing net? What brand are they? Also, did you just mount them using 2 sided tape, or some other way? Thanks so much!

[@shuswapoutdoors]

I got them from Amazon. Quick fist. I bolted them on with a single stainless bolt.

[@thorn11]

Awesome, thanks!

[@MTrout5140]

I have a question. I got a WC-16 Lund. Basically the same boat, How did you mount the bimini hinge mounts to the top rails? Did you just use screws or did you bolt them? if you screwed them in are you ever concerned with them pulling out under stress?

[@shuswapoutdoors]

Mounted to the top rail with stainless screws. I went with a #12 screws and have not had any issues with them loosening off.

[@brianarp4658]

Excellent makeover. One question regarding the seat post installed on the port mid-ship bench. I understand this is where the gas tank is now stored. Was there any issue installing the seat base and king pin? Do they interfere with one another ?

[@shuswapoutdoors]

no issues with fitting the seat post above the fuel or battery

[@rickberube5115]

This is exactly what I was looking for in an enclosure for my 16 ft smokercraft. If you don't mind. What do you have into the enclosure?

[@shuswapoutdoors]

No idea to be honest.

[@eddydye3215]

Where did you get the wireless stern light that fits into the Scotty base?

[@shuswapoutdoors]

it's a scotty light

[@anyiel69]

It will be possible to know where they made the front and sides of the bimini tops. I'm looking for one and I have not found where to buy it. Thanks in advance!

[@shuswapoutdoors]

the bimini came from iboats.com, the side/front curtains were custom made by the canvas man in scotch creek www.canvasmanworld.com/

[@eric_3644]

Really nice boat! I just bought a ssv16 used.was there any flotation foam to remove In the under seat storage compartments?

[@shuswapoutdoors]

Yes, they are full of foam.

[@mikerobinson7965]

Nice setup! What did you use to strap down your net and paddle?

[@shuswapoutdoors]

Thanks Mike, they are quick fists.

[@alleycat3180]

You should do a video showing us your settings for the hummingbird helix 7

[@shuswapoutdoors]

Will look into it, might be a good vid.... Thanks!

[@tewksburydriver8624]

One more question for you, is the 30 hp enough? I'm ordering an SSV 16 side console and I'm considering a 40.

[@shuswapoutdoors]

Nope, you won't be happy with a 30. 40 or 50... I know 50 is more than it's rated for but it can handle it no problem.

[@tewksburydriver8624]

@@shuswapoutdoors .. thank you

[@shuswapoutdoors]

No problem

[@mikec7373]

Awesome set up! Do you have a rough idea of the boats draft? Also, can you operate the tiller with someone sitting on the seat on other side of motor?

[@shuswapoutdoors]

I've had 5 adults and 2 kids in it with no issues. The 50 pushed all that weight just fine

[@normtrainer3429]

Very nice mods, makes boat much more comfortable. Where did u get the Bimini top and curtains made?

[@shuswapoutdoors]

The Canvas Man in Scotch creek. He does great work. www.canvasmanworld.com/

[@DankAlchemist]

have you thought of the shock rods for holding bimini on angle? while not using it

[@shuswapoutdoors]

Not sure what you mean?

[@DankAlchemist]

basically bars that hold up bimini so its not in the middle of your boat when its down

[@shuswapoutdoors]

Have that already. SS bars that hold it up to the front....

[@theunslombard9290]

Hello From Vancouver I like you r setup it looks great and seems to work well for you, can you please share with me where you got the Bimini setup with front and sides, I have a 14' smoker craft that I need to close up for some rain shelter...I am in Vancouver BC after all hihihi. Would appreciate some info on that thanks!

[@shuswapoutdoors]

bimini came from iboats.com and the curtains were made here in Scotch Creek.

[@willwarnock2911]

I was thinking about getting a big open utility like an ssv18 or Alaskan and putting an enclosure like that right to the bow. How is it holding up? Can you see forward ok if it’s raining or really damp or does it fog up? Does it catch the wind and make the boat hard to handle at all? Thanks, great rig

[@shuswapoutdoors]

it shed rain very well. it does fog up in the early AM if the humidity is really high but those days I usually have a buddy heater going that clears it off really fast. it is fantastic in the wind and doesnt get pushed around much. i have no issue controlling the boat with the 5hp in high winds. well worth the money!

[@westrootsindustries9916]

Where did you order your Bimini top? Did you just order one online and then get the fronts and sides custom made at a canvas shop?

[@shuswapoutdoors]

100% custom made

[@anthonyvernali502]

Hi,I also have the ssv 16, I'm interested in what type of seat mount plates and posts you have there,I have the clamp on but I would like one of those setups for my seat to run the tiller from.I also have the temptress. Thank You.

[@shuswapoutdoors]

They are called king pins. Picked them up online. They are pretty common

[@anthonyvernali502]

@@shuswapoutdoors Thank You I'll check into them.

[@photocdn]

Hello! I have the same boat (except mine is black) and your video's really show what can be done with it, very inspirational. I'm in the process of installing a gps/sonar and ran across your review of the rig rite transom transducer plate on amazon! Just wondering, did you screw it in to the transom or epoxy it? I'm hesitant to drill into the transom but it seems like it's done all the time. I read about the stern saver plate that comes with epoxy but I can't find it locally anywhere. Did you drill yours? any regrets? Many thanks!

[@shuswapoutdoors]

I used a couple of stainless screws with 3m underwater sealant. No issues at all as long as you do it correctly

[@DanM518]

Looks great I'm looking at this same type of set up if u don't mind me asking how much do u have invested finanicaly not including time ruffly thanks for time your friend in NY, Dan

[@shuswapoutdoors]

Around 3 grand on top of the boat and motor

[@javiermarante5344]

This top and side panels is a complete kit or did you have to piece it together?

[@shuswapoutdoors]

It's custom made from a local canvas shop

[@javiermarante5344]

@@shuswapoutdoors ah ok! Would you mind me asking how much it was ?

[@shuswapoutdoors]

I can't remember to be honest. I think it was $1000

[@charleswpanet5231]

Where did u get the Bimini top and windows curtains I would like to get that as well

[@shuswapoutdoors]

Custom made

[@darrylwiebe3508]

Did you get the front window and sides made in your local area? Salmon Arm or some place else.

[@shuswapoutdoors]

Scotch creek

[@jeremymoose1613]

oh yeah I forgot the water pump easily brakes but it's only 3 years only on that evinrude so mercury is now my favorite.

[@DankAlchemist]

i always changed mine every 2 anyways on all my motors ive had

[@DankAlchemist]

i like power to weight ratio and thats always going to be a RUDE 2 stroke torque

[@chrisspringer8889]

How's that 30hp push the boat down the lake with two adults?

[@shuswapoutdoors]

The 30 is too small for the 16ssv. I switched to the 50hp which is perfect! Wouldn't go any smaller than 50

[@rumbleseat1]

Well done!

[@shuswapoutdoors]

Thanks

[@DankAlchemist]

im getting the same one but with the bow platform

[@shuswapoutdoors]

Sounds like a nice boat!

[@DankAlchemist]

Shuswap Outdoors same boat just different option

[@DankAlchemist]

I need that bimini

[@shuswapoutdoors]

It sure makes life nice. It has allowed us to use the boat way more and be more comfortable.

[@snowboy720]

Hey there I really like the set up! I'm thinking about picking those seats up, what can you say about them? Comfortable? Also wanna know where you got the Bimini top like that? Thank you

[@shuswapoutdoors]

The seats are great and have no problem sitting in them all day. I probably have 100 days on the water over the last year, and they are holding up great. Still look and feel new. Everyone who has sat in them likes them. I picked up the bimini from www.iboats.com/ ...... And had the sides and fronts custom made by www.canvasmanworld.com/ Thanks!

[@snowboy720]

What size fuel tank were you able to get under that seat? You didn't end up showing that in the video. Thank you for the info

[@shuswapoutdoors]

25 Liter 6.6gal

[@ronlawson18]

How do you drain water from the bow section? I have an aft drainage hole under the front bench but not one for the water to enter thru the bench I am thinking I will drill my own under the front of the bench.

[@shuswapoutdoors]

The ssv has a small drain hole that allows water to flow underneath the floor to the stern.

[@ronlawson18]

There is no hole on the bow side of the front bench. Any pics I've seen also don't show a drainage hole on the bow side of the bench?????

[@shuswapoutdoors]

Mine has a hole in the bow section. Water drains through it and under the bench all the way to the stern.

[@ronlawson18]

@@shuswapoutdoors Thanks. I am going to drill a hole on the bow side of the front bench the same size as the others.

[@jingles104]

Hey man, do you still have your old downriggers that you replaced? If so, are they for sale by any chance? Really enjoy your channel!

[@shuswapoutdoors]

Sold them already. And thanks for watching my videos! Really enjoy making them!

[@robertkenyon3900]

Where did you get that Bimini top did you have to get it made

[@shuswapoutdoors]

Custom made

[@chadbassmaster9084]

Nice! What do you get for a top end with that setup?

[@shuswapoutdoors]

35mph solo with gear and 40L of fuel

[@chadbassmaster9084]

Shuswap Outdoors 35!!!!! Wow man. With the 30. I picked up a 2020 yamaha f25c this morning. Wondering if its enough motor for that boat. If ur doing 35 than id say it is.

[@shuswapoutdoors]

I put a 50 on it. The 30 merc was garbage

[@dougshimla7072]

Great job. I just purchased the same boat as yours. My partner was watching the video with me and she really liked your Bimini top. Where did you purchase?

[@shuswapoutdoors]

Thanks, I had it custom made

[@danielhanlon6633]

where can i find a toper like that for a h34 gregor 14 foot

[@shuswapoutdoors]

custom built

[@kensantiago132]

Thank you sir!

[@noahverra6364]

where did you get the front windshield portion? or the whole top

[@shuswapoutdoors]

Custom made

[@danielsoulier8458]

Great set up on boat. Love the Bimini, where did you buy it from?!

[@shuswapoutdoors]

I had it custom made

[@michelangelo644]

what's the brand/model of that bimini and the side/front curtains?

[@shuswapoutdoors]

Custom made

[@michelangelo644]

@@shuswapoutdoors Sweet! Mind sharing details of where you got it done? I'd like that same setup on my ssv 18.

[@shuswapoutdoors]

Had it made at a local canvas shop

[@MarineFlipper]

Were can you order a top like that or if you know a website that you would recommend?

[@shuswapoutdoors]

the bimini came from iboats.com, the side/front curtains were custom made by the canvas man in scotch creek www.canvasmanworld.com/

[@shawnsteinberger]

How much did the cab work cost in addition to the bimini?

[@shuswapoutdoors]

Just over a grand. Well worth every penny!

[@claytoncampbell3777]

Does Lund make that Bimini?

[@shuswapoutdoors]

Nope, custom made

[@RenegadeRiderBC]

Freaken sick ride man...thought i didnt like those ssv's but seeing yours just changed my opinion...i just ordered a 16' fury with the 25 on the back. You probably said it and with all that on it it probably isnt but is it tippy at all? Like can u stand on one side without it being uncomfortable?

[@shuswapoutdoors]

Its a very stable hull design. You can have two guys standing on one side.... fighting and netting a fish and it doesn't feel like its going over.

[@dougroberts3643]

@The Herb I'm thinking about buying the 16' Fury. How do you like this model after owning it now for a few years

[@RenegadeRiderBC]

@@dougroberts3643 I love it! I would definitly buy it again!

[@dougroberts3643]

@@RenegadeRiderBC Thanks for replying. Your comment helps settle my nerves over this boat. I think I will go with this one on such a high recommendation by you. It has the livewell and bow platform that I want for fishing Lake Erie backwaters in Ohio. It comes with the Merc 25 hp. Hoping that's big enough. Will only be carrying two people with an approximate weight of 380 pounds

[@RenegadeRiderBC]

@@dougroberts3643 I have a 25 merc on mine and loaded down with gear and 2 guys Im getting 24 mph with the 24v Terrova up front. The only complaint I have is go with anything else other than the stock ShoreLand’r trailer they put under the boat. Otherwise Ive had my Fury in water I really shouldnt have been out in and Im still here to talk about it! Good luck!

[@MrBlueschild]

What make is the Bimini and curtains

[@shuswapoutdoors]

Custom made

[@theunslombard9290]

What is the size of your bimimi's "roof" is it 6' ?

[@shuswapoutdoors]

Yep, 6'

[@theunslombard9290]

Hello, when you did the bimini, did you just have the front and sides made up or did they do the Bimini and sides, I have a bimini top just need the front and sides

[@alleycat3180]

What hooks u use for fishing

[@shuswapoutdoors]

Gamakatsu siwash

[@marcuslindquist2910]

where did you get your Bimini cover? I have an older SV14 and want to add it to my boat

[@shuswapoutdoors]

iboats .com

[@gerardhaubert8210]

How often do you deploy the bimini or full canvas.?

[@shuswapoutdoors]

every time i use the boat

[@r.seaboats6666]

Can anyone tell me where the heck do I get one of those bimini with the curtains, I'm not sure what they're called having a hard time finding them I need one for my boat where can I get one thanks

[@shuswapoutdoors]

It is all custom made. Any good canvas shop can make one for you.

[@r.seaboats6666]

@@shuswapoutdoors I'll have to see if there's one locally here

[@doncatch1]

enjoyed

[@shuswapoutdoors]

Thanks

[@danielmalouf7447]

Awesome Bimini Top man - where did you get it?

[@shuswapoutdoors]

Custom made

[@stevehenry9053]

@@shuswapoutdoors seriously?? dude, very nice

[@shuswapoutdoors]

Thanks

[@theunslombard9290]

sorry I red all the comments and found it thanks again....

[@jeremymoose1613]

you should get a evinrude 30 etec there the strongest motor their is, last time me and brother got heavy load in the boat and we didn't know evinrude etec was the strongest motor there is.

[@shuswapoutdoors]

Have no heard many good things about the etecs around here. People seem to have a lot of issues with them. I think I would go with the Honda 50 if I were to mount a new motor. It's lighter then everyones 4 stroke 40s....

[@DankAlchemist]

i just got 2017 etec 25 :p i love it

[@alleycat3180]

Shuswap Outdoors I would go with Yamaha very reliable. I never had any problems with the outboard motor or a Yamaha V8 engine in a Volvo XC90

[@shuswapoutdoors]

Yamaha or the Honda, not sure what way i'll go

[@DankAlchemist]

lol ill just keep posting videos of me smoking hondas and yamahas in my evinrude

[@gerardhaubert8210]

Where did you get top, sides etc?

[@shuswapoutdoors]

Custom made

[@natejwass]

How much did that kit cost you

[@shuswapoutdoors]

What kit?

[@benjaminjoelwatson]

Hey thats sharp! funny I Live in Kamloops Just bought a similar boat was surfing youtube for ideas and I swear I recognized You. I believe I worked with you years ago. Great job with boat. Cheers! Paul creek slicing?

[@shuswapoutdoors]

Spent a few months working there..... Man that was 13-14 years ago.

[@benjaminjoelwatson]

Ya me too, I was there for a couple months(afternoon shift), Thats funny I recognized You. The Little Shu is pretty dirty right now hard to fish the mouth of little river. But I did ok on the big lake last weekend. Nice to see Im not the only guy obsessed with my boat. haha just kidding. Happy Trolling!

[@shuswapoutdoors]

The big lake was pretty good today until 11am........ seems to be an early bite this spring.

[@VenganzaCayey]

How much is that boat worth ...

[@shuswapoutdoors]

The base ssv is around 5 grand

[@gerardhaubert8210]

Biminitop doesn’t cover driver

[@shuswapoutdoors]

Nope, the back is open for fishing

[@hulkhuggett]

Probably get more subscribers if it wasn't a constant selfie shot. Can't watch.

[@dirtydogvideo]

how are those tempres seats holding up? thanks.

[@shuswapoutdoors]

Fantastic! No issues at all.

[@dirtydogvideo]

@@shuswapoutdoors thanks. I am looking at getting one of those ssv 16 boats to set up pretty much like yours. Your videos are helpful.

[@georgeturcu5537]

Just awesome. Looks badass

[@shuswapoutdoors]

Cheers buf

[@shuswapoutdoors]

Bud

[@mac2645]

What type of seat mounts are those and where did you get the bimini?

[@shuswapoutdoors]

They are a king pin mount. The Bimini is custom made.

[@gerardhaubert8210]

How did you do the floor?

[@shuswapoutdoors]

it came with the boat