Lure Making Resin Sinking Stickbait

[@ColinB89]

Nice one. Red line behind the gillcover definitely gives it an old school touch

[@SuchaJerkCustomLures]

Yeah I decided to expose it this time 😉 little hot spot never hurt anyone 👌

[@pa_maj.MARTINI-van-MAN]

That turned out brilliant. I thought for a moment the hand paint job was going to be the finished look.

[@SuchaJerkCustomLures]

Haha it's just the last way of undercolour to avoid airbrush cleaning 😅

[@DavidSandoval-j5k]

Great Job, really nice finish lure. Where can I get the same scale stencil. Much appreciate your response.

[@SuchaJerkCustomLures]

Thanks 🙏 My budy making those, so write me PM I, we can discuss the prices and shipping 😉

[@MrIceman3434]

Hello, where can I find such a 12:55 fish scale shape?

[@SuchaJerkCustomLures]

I ordered locally from CNC operator 😉

[@bolobolo1076]

una pregunta la lamina metalica de estampado para las escamas me podrias poner donde se vende? te lo agardeceria muchisimoooooooooo porque busco algo asi y no lo encuentro

[@SuchaJerkCustomLures]

Desafortunadamente no se encuentra online ni en las tiendas 😔 tendrias que buscar un operador CNC que te lo haga, suerte 🤞

[@bolobolo1076]

@@SuchaJerkCustomLures vaya una putada si,porque la verdad que es un gran invento para muchos que hacemos señuelos artesanos, muchas gracias tio , gran canal

[@jesusgil3884]

Igualito a una sardina felicidades un ecselente trabajo.

[@SuchaJerkCustomLures]

Muchas gracias 🙏 😊

[@genagans2871]

Добрый вечер благодарю за видео зачёт удачу вам...,👍👍👍👍👍

[@SuchaJerkCustomLures]

Спасибо как всегда 😊 🙏

[@mainorcoto478]

Excelente trabajo

[@SuchaJerkCustomLures]

Muchas grazias amigo 🙏👋🎣

[@jorgevillalobos7599]

Los señuelos mejores hechos por una persona son los tuyo pana ! increible.

[@SuchaJerkCustomLures]

Muchisimas gracias Jorge 🙏 Los comentarios como el tuyo hacen que me sienta orgulloso de mi trabajo ☺️

[@jorgevillalobos7599]

@@SuchaJerkCustomLures claro ! por eso no me pierdo tus vídeos por que yo tambien fabrico mis señuelos pero tu level es DIOS jajajajjaja saludos.

[@SuchaJerkCustomLures]

Aún me falta para el nivel Dios 😅... pero con el tiempo se mejora asi que suerte con los tuyos también 💪 y si un dia te animas a hacer vidéos dime que seguro los voy a ver 😊

[@jorgevillalobos7599]

@@SuchaJerkCustomLures seguro que si !

[@joker1031473]

Beautiful job👍🏽

[@SuchaJerkCustomLures]

Thank you 🙏

[@cucupsupriadi5011]

Salah satu jenis lure pavorit saya mr. Lure fluter saya sangat ingin memiliki salah satu lure yg mr buat 😍

[@SuchaJerkCustomLures]

Terima kasih 🙏👋 semua yang terbaik dari Polandia 🇵🇱🎣

[@gabifishing642]

Work well done.

[@SuchaJerkCustomLures]

Thank you 🙏 I like your lures as well, I was your subscriber, even before I started my channel 😉

[@gabifishing642]

@@SuchaJerkCustomLures I really did not know, I'm glad there's a friend who compliments. Thank you very much.

[@mosesmedina789]

Great video! I'm always learning new things and ways of doing things differently. I definitely enjoyed this one. I was just wondering where I could find those sweet stamped scale patterns as well as one of those cool rotating exacto style knives. First time seeing anything like it. Keep up the beautiful work. Thanks for sharing them with us.

[@SuchaJerkCustomLures]

The stamp for the scales is produced by my budy, you can contact me on messenger under Such a Jerk Custom Lures to discuss the price and shipping 😉 the rotating exacto knife I bought in artistic shop, so look it up there

[@fernandocalderon8947]

Excelente trabajo!!!! 😳

[@SuchaJerkCustomLures]

Muchas gracias ☺️🙏

[@ГенадийПелюховский]

👍👍👍очень классно получаются.. Оч круто

[@stripermanly]

Have you tried to weight the lure by attaching lead to your internal wire frame? Seems like it would save a lot of extra work and time as opposed to drilling and filling the holes

[@SuchaJerkCustomLures]

Hi Rene 😉 yes I did try that and had decent results, however I'm too paranoid that while I don't see, during the pour in the closed form, that the weight will shift and won't be sitting perfectly symetrical 😱

[@wharris4874]

@@SuchaJerkCustomLures Unless you fix the weight on the wire it will shift inside the mold

[@aleenabeel8232]

Love your work ❤❤could you plz make a trolling lure for king fish or a lure which can be troll with 5 to 6 feet depth.

[@SuchaJerkCustomLures]

Hi 👋 I might make a vibration trolling lure 😉

[@btgame1836]

Great piece in this cruil. Presses in it n what the priece to work it

[@SuchaJerkCustomLures]

Thanks man 🙂

[@davidguijogarcia7258]

Muy muy buen trabajo yo diría q es un trabajo profesional ¿me podrías decir q marca de epoxi utilizas y donde comprarlo a poder ser un enlace de donde lo compras? 🤔

[@SuchaJerkCustomLures]

Muchas gracias David 🙏 el epoxi qué uso lo compré cinco años atras en Polonia e ya no lo producen, lo sento 😔

[@davidguijogarcia7258]

OK gracias me podrías recomendar alguno

[@khawarmanzoor4703]

Great lure as always I tried to make a sinking pencil but I am confused about the weight adjustment Can u guide it's not getting the fluttering action on the fall

[@SuchaJerkCustomLures]

Same amount in front and below the bottom hook hanger. Put it as deep as half of the lure body height. Also don't make the belly to thin and round, flatter the belly more fluttering on the drop you will have 😉

[@khawarmanzoor4703]

@@SuchaJerkCustomLures thanks alot How much weight should I put its a 90mm lure Approx height 30mm weight of itself is just 6gm without anything just the wood

[@SuchaJerkCustomLures]

@@khawarmanzoor4703 I would say if you have ball sinker of 2.5g in front and behind the bottom hook eye it should be ok, but just glue the weight to super glue impregnated lure body, put also the treble hooks. Thank adjust the amount of weight untill it sinks horizontaly 🙂

[@khawarmanzoor4703]

@@SuchaJerkCustomLures thanks alot

[@Max-hq8xp]

Фантастика бро

[@SuchaJerkCustomLures]

Большое спасибо 🙂👋🎣

[@seatroutking7555]

Great craftsmanship it looks like a fish killer, where did you find the scale pattern steel block

[@SuchaJerkCustomLures]

Thank you 🙂 I bought it from local craftsman 🙂

[@seatroutking7555]

@@SuchaJerkCustomLures 👍🏻

[@Misterseñuelo]

Hola amigo Do de puedo conseguir las escápula o babero el acrílico que pones en los señuelos a 45 grados? No se con que nombre buscar en aliexpress lo busco y no lo encuentro gracias amigo

[@SuchaJerkCustomLures]

Hola 👋 es que no es acrilico, ese es el enlace para conseguirlo en AliExpress: a.aliexpress.com/_vaj6P8 yo uso el de 1.0mm. No viene cortado, asi que tendras que hacerlo tu o, si no tienes los utensiles, puede cortartelo un operador CNC 🧑‍🔧

[@Misterseñuelo]

@@SuchaJerkCustomLures gracias amigo al igual que usted tengo un pequeño canal de fabricación de señuelos pero soy fiel seguidor de tu interesante canal siempre espero con ansias tu siguiente video mucho éxito bro y gracias por la información 👍

[@SuchaJerkCustomLures]

@@Misterseñuelo Me subscriví a tu canal 😎 mucho exito para ti también 💪

[@herocolty]

Wow.. super 👌👌👌

[@SuchaJerkCustomLures]

Thank you ☺️

[@schalkvandermerwe4855]

Hey what size wire mm would you recommend for 5-10kg range fish? Looking to go after smaller pelagic fish and not looking to get wire bent out or broken. Thanks

[@SuchaJerkCustomLures]

So when it comes to pelagics I only caught tunas between 5-11kg and 10kg trevally (5kg tuna on that exact lure 😉) I use twisted 1.2mm through wire and never had any issues 💪😎

[@schalkvandermerwe4855]

@@SuchaJerkCustomLures awesome, thanks for the feedback 🤙

[@schalkvandermerwe4855]

@@SuchaJerkCustomLures also is that just regular tie wire? If not can one consider tie wire as an option? Cheers

[@SuchaJerkCustomLures]

@@schalkvandermerwe4855 I'm not specialist I recall is written something like stainless steel Tig welding wire

[@MH4Designs]

how does it swim ?

[@SuchaJerkCustomLures]

The epoxy wasn't fully cured to do swim test, but swimming action of the same lure I made week earlier can be seen at the end of last week video 😉

[@salentospinning]

nice lure

[@SuchaJerkCustomLures]

Thank you 🙏🙂

[@sandinaiwan95]

lure luar biasa kawan

[@SuchaJerkCustomLures]

terima kasih saudara 🙏 semua yang terbaik dari Polandia 🇵🇱🤙

[@KAKNOEL]

Amazinggggg

[@SuchaJerkCustomLures]

Thank you 🙏🙂

[@ivanbl4001]

Show top , excelente trabalho

[@SuchaJerkCustomLures]

Muchas gracias 🙏

[@benskai2475akurfishing]

kren dan jenius senior mantap salam dari indonesia timur

[@benskai2475akurfishing]

mantap

[@blinddoglures]

Since you never do anything with very large amounts of resin you should get a small air pump and make a tiny little vacuum chamber it shouldn't cost too much and shouldn't take up too much space you can just make it as big as necessary

[@SuchaJerkCustomLures]

Hi 👋 do you mean to put the mould after pouring and degas it ??

[@blinddoglures]

@@SuchaJerkCustomLures ya

[@geovafrancisbenavides4767]

Super ese señuelo

[@SuchaJerkCustomLures]

Gracias 🙏😊

[@alejandragmzo1673]

Hola donde con sigo la estampa de asero

[@SuchaJerkCustomLures]

Hace poco me asocié con la persona que hace esos sellos para ayudarlo a llegar a más clientes potenciales. Yo mismo pagué originalmente por el primer sello y aunque sé que no son baratos, vale la pena la inversión 👍 Los sellos de escala están disponibles en varios patrones diferentes, ahora los hacemos a ambos lados (dos patrones diferentes de su elección). El tamaño es de 15x5 cm, por lo que es adecuado incluso para cebos de tamaño Tuna/GT/Pike 😉 El precio de un sello es de 100 $ + envío (el costo de envío no es mucho, ya que los hicimos lo suficientemente delgados para minimizar el peso y encajarlos en burbujas sobre). Si quieres comprar uno, avísame y te envío el patrón disponible 🙂 El tiempo de espera actualmente es de un máximo de dos semanas. Saludos y líneas estrechas, Rafal/ Such a Jerk

[@holtremare2414]

SPETTACOLARE BRAVISSIMO

[@SuchaJerkCustomLures]

Grazie mille 🙏🙂

[@outcastfisherman]

Please tell me where you got that mold at?

[@SuchaJerkCustomLures]

I made it myself 😉 if you follow the steps of this video: kzbin.info/www/bejne/f4jOiaR7ir-nra8si=cMl6Wt9i8eVSalHx you can make one yourself, obviously the shape of the lure is up to you 😉

[@Клёв86]

👍👍👍👍👍

[@SuchaJerkCustomLures]

🙏😃🎣👋

[@labtrainer09]

VERY nice, Rafal-maybe one of your best yet. And your sequence on the fairly complex foiling process is excellent. But what about a water test? Are you planning to show us how this fine-looking stickbait performs when retrieved? I hope so. Best, Chris

[@SuchaJerkCustomLures]

Thank you Chris 😊 the lure wasn't fully cured today before posting the video to try water test... But fear not - the swimming action of the same lure is showed at the end of the previous video 😉

[@alexeititov8278]

Здравствуйте. Подскажите пожалуйста насколько износостойкий этот материал?

[@SuchaJerkCustomLures]

Он очень прочный 😉 больше, чем древесина липы - по твердости я бы сравнил с приманкой из бука, но даже если щука клюет, она все равно не впитывает воду 😉

[@Hm.Fishing167]

Witaj. Jak zwykle profeska pełna gęba. Napisz proszę czy miałeś jakieś problemy podczas łowienia na własne przynęty ze stelażem wklejony w dwie połówki balsy? Czy na szczupaki zda to egzamin? Stelaż robię z drutu 1mm. Balse przed malowaniem impregnuje tak ja Ty tj w kleju. Później maluje i na kilka warstw lakieru Hartzlak (ok 7). Połówki sklejam również cyjanopanem. A może zastosować inny klej? Szkoda ryb na testy wiec pytam u źródełka😜 robiąc z lipy nie mam tego problemu. 👍

[@SuchaJerkCustomLures]

Siemka 😊 nie łowię szczupaków, natomiast po morskich rybach wiem, że Hartzlak i balsa to zbyt miękkie połączenie na zębate ryby, jeszcze balsa impregnowana SG + 3-4 warstwy epoxy zdały by egzamin (od biedy) to balsa + lakier raczej lepiej nie ryzykować. Z lipy też świetnie się robi metodą dwóch połówek 🙂

[@pascualduarteperca]

Hello, which percentage do you use for suspending and floating lures?

[@SuchaJerkCustomLures]

Hi 👋 10-11% of microbaloon and you just adjust amount of led to determine floating/suspending 😉 above 11% the mix is just too thick and you will get problems with pouring the lure

[@pascualduarteperca]

@@SuchaJerkCustomLures thank you very much for the information

[@SuchaJerkCustomLures]

@@pascualduarteperca you're welcome 🙂

[@oswalo8628]

El señuelo esta hecho de resina epoxica?

[@SuchaJerkCustomLures]

Hola 👋 no es una resina poliuretanica y le añado micro globos de vidrio para aumentar la flotabilidad 🧑‍🔬

[@oswalo8628]

Donde consigo el molde

[@SuchaJerkCustomLures]

Hago mis moldes de silicona de fundición. Aquí hay un tutorial sobre cómo hacer este formulario: kzbin.info/www/bejne/f4jOiaR7ir-nra8

[@В.Д.В]

А на последней стадии покрываете ювелирной эпоксидной смолой ?

[@SuchaJerkCustomLures]

Дважды покрываю эпоксидной смолой на разных этапах. Два слоя смолы 😉 переходим к готовому воблеру

[@papayoowtv532]

Can i buy some of your amazing lures?

[@SuchaJerkCustomLures]

Well actually for now I'm not selling my lures... Just not enough time between my day job, family, fishing and making lures for You Tube 😪 please subscribe to the channel if I will start selling them for sure I will mention it in my videos 😉

[@ОлегОлег-о7о5у]

👍👍👍

[@SuchaJerkCustomLures]

🙏☺️👋

[@SmpFishingtech]

Suuuuper...... intelligence

[@SuchaJerkCustomLures]

Thank you 🙏☺️

[@AlegriaFishing]

What epoxy are you using ?

[@SuchaJerkCustomLures]

Hi, its local Polish product, I bought it 5 years ago. Now it has been discontinued, so soon I'll be searching for new one. Based on the popular reviews you can't go wrong with True Coat and Envirotex Lite

[@AlegriaFishing]

@@SuchaJerkCustomLures I bought this to test it on my new project.

[@jorgerodrigues7056]

muito muito bom,abraço

[@SuchaJerkCustomLures]

Obrigado Jorge 🙏 abraços desde Polônia

[@jorgerodrigues7056]

@@SuchaJerkCustomLures de nada muito bem amigo ,abraço para a Polonia

[@MyPawlooo]

Jakiej szpachli używasz ?

[@SuchaJerkCustomLures]

Jakiejś dwuskładnikowej samochodowej do wykańczania, w OBI kupuje

[@MyPawlooo]

Czyli jakaś żywica poliestrowa ?

[@PchelaUbica]

Why are you moulding? Isnt easier to do it with wood ?

[@SuchaJerkCustomLures]

If you consider that the lures make out of the mould all have carved head details, no it's not easier or faster. The blank from the mould is ready in 45min, to cut it out of wood and carve it would take at least 2-3h, depending on the amount of details. Second reason I use those.lures.for.sea fishing - very toothy fishes, even if it chewed properly still will keep its bouyancy and won't take water 😉

[@PchelaUbica]

@@SuchaJerkCustomLures nice. Thank you for answer 🙏 So that material is stronger ?

[@SuchaJerkCustomLures]

@@PchelaUbica Relatively, maybe not stronger than oak wood, or beech wood, but if you compare to the same bouyancy - let's say basswood, definitely stronger 💪

[@krestus3609]

Cuando grande quiero ser como tú quisiera saber el calibre del alambre inoxidable

[@SuchaJerkCustomLures]

😅 tendras que hacer muchos señuelos pero sobretodo beber mucha cerveza 🍻🇵🇱 y el alambre es 0.8 mm

[@WladimirNSO]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@SuchaJerkCustomLures]

🙏🙏🙏🙂🙂🙂🙂👋

[@dimasab5258]

what the materials??

[@SuchaJerkCustomLures]

Poliurethane casting resin 😉

[@lekjoefishing6889]

Cakep

[@SuchaJerkCustomLures]

Terima kasih 😊 itu menangkap ikan terbesar saya saat berlibur di Seychelles 💪🐟🎣

[@wharris4874]

Part 1 ??

[@SuchaJerkCustomLures]

Look up one week before this video 😉

[@SuchaJerkCustomLures]

Sorry that was just one part video 😉 if you interested how to make the master and the form, you can watch this one; kzbin.info/www/bejne/f4jOiaR7ir-nra8

[@LeviVanSluijs]

Hi

[@SuchaJerkCustomLures]

Hi Levi 👋 enjoy the video 😊

[@LeviVanSluijs]

@@SuchaJerkCustomLuresthx I sure will