wanna follow me on instagram? / solarfallbaits how about facebook? / 1645913379015279 patreon: / solarbaits
Пікірлер: 200
@SolarfallBaits3 жыл бұрын
Alright folks lets make a crankbait!
@erlinglarsen3 жыл бұрын
Good to see your back 👍
@brianjones8663 жыл бұрын
SolarBaits yeah metal music let’s hear it 🔈make two videos one with metal music one without Keep the videos coming
@rebornpho57163 жыл бұрын
Not sure if you will see the brother but if you do could you please let me know where you get your stainless wire from? I have a hard time finding it in straight lengths like what you use. Cheers all the way from Aus.
@SolarfallBaits3 жыл бұрын
@@rebornpho5716 i got mine from ebay
@MarcosMVlures2 жыл бұрын
Hey Solar, did you use the vallejo liquid silver? Is there much difference with the vallejo air silver color?
@Darkmann773 жыл бұрын
Fantastic work! So glad you chose the deep diving crank bait and the paint scheme was on point! Wow!
@bigt93413 жыл бұрын
Great build. Love that you make most all of your bait components.
@colbyknowles74823 жыл бұрын
wow, i love your craftsmenship and attention to detail 10/10.
@Melanzyk3 жыл бұрын
watched like 2 min and I'm impressed. You have tools!
@Deekm693 жыл бұрын
I'm very impressed at your wire bending, I'm a Dental Technician and use similar tools for orthodontic appliances. 🎣🎣🎣🏴🏴🏴🏴
@SWhite-hp5xq3 жыл бұрын
You’re air brushing is on point mate👍🏽
@Ruffleist3 жыл бұрын
As always enjoyed watching thank you SolarBaits ...
@drevildog13 жыл бұрын
Great workmanship, they look beautiful
@theRussianJiu3 жыл бұрын
Your painting skills are remarkable.
@valdemargreholm81073 жыл бұрын
Love your baits man, beautiful action on this one!
@stripermanly2 жыл бұрын
That’s very impressive to say the least. I already paint baits, but think I’ll try and custom make a few of my own now.
@pastmasters95913 жыл бұрын
Man I love when I see a notification from you! Made my day
@envylures57703 жыл бұрын
True artist man ! Well done 👍
@colossalbasscustombaits59633 жыл бұрын
Very nice batch of baits excellent crath man ship!!! BSI finishing resin is what I youse for clear coat it is excellent, fin and does not have much bubbles great stuff!!!
@ashigreen32 жыл бұрын
Love your Painting job , inspired
@matemiklos6282 жыл бұрын
I love your work, I learned a lot from you!
@RoggiesRigs3 жыл бұрын
So many great baits from you! Lots of imitators but these vids and quality baits are the sh!z 🤙 glad you’re back rockin’ and rollin’ my man!
@vernonhearn27248 ай бұрын
That is some fine craftsmanship!!!!!!!!!!!
@joemeyeres7692 жыл бұрын
Man these are awesome! Great talent!!!
@vidalzamudio52093 жыл бұрын
I really like your work man. Like all the time. Congratulations. From México.
@ruizdjabel3 жыл бұрын
Fantástico me e quedado hipnotizado viendo el video que artista y el resultado final impresionante.
@nolanpeter27483 жыл бұрын
Another beautifully made bait always enjoy your videos.
@SolarfallBaits3 жыл бұрын
thank you, I appreciate that!
@andrewmiller37673 жыл бұрын
You’re work is impeccable. Get yourself the little Ryobi bandsaw....you won’t regret it
@fossilgamersbirds86412 жыл бұрын
Did you move to Canada just so you could get closer to Blasphemy? And maybe get them to, finally, record a third album? ;)
@frogtv35943 жыл бұрын
Absolutely beautiful bait
@user-po4pb5rl9u2 жыл бұрын
you are great~!! you are my teacher~!!
@riaansteyn30493 жыл бұрын
Metal for inspiration 🤘🏽🤘🏽🤘🏽 Legend wait for it ..... Dary !!
@alfatihanglerlybaz96833 жыл бұрын
Amazing lure 😎👍
@AC-ht3ju3 жыл бұрын
Fantastic Work! I just relax and watch Greetings from Germany ✌
@XxmyvictoryxX2 жыл бұрын
Immortal! Make a bait with a corpse paint paint job
@precisionanglingYT3 жыл бұрын
Amazing as always!!
@jamesedwardson6053 жыл бұрын
Good to see back around...you were gone for a few...Make us some baits and catch some fish for us please....
@terrywade73463 жыл бұрын
As always awesome Mikko
@pastmasters95913 жыл бұрын
Holy shit you are good!!! No one compares! I'm ready to buy!
@dexterhuang73033 жыл бұрын
its beautiful
@talldave10002 жыл бұрын
Very Impressive!
@j.ciscaartificialartesanal3 жыл бұрын
Parabéns pelo seu trabalho está isca artificial artesanal ficou muito bem elaborada 🐠
@hanneslindstrom46653 жыл бұрын
That action. Wow!
@PescadoresdoInterior Жыл бұрын
Sensacional parceiro! 👏👏 Saudações do Brasil.
@brianjones8663 жыл бұрын
Another badass build I would just hang them on the wall I’d hate to lose one Great video
@Penisdoll3 жыл бұрын
Finally a lipped lure Mikko 🤘🤘🤘🤘🤘😍😍😍😍
@danomite3592 жыл бұрын
Cool. If the eye on the nose was adjustable, that would be even more a killer.
@funkypat53493 жыл бұрын
So, more ''bait" making fun! So, have you discovered Candiantire!!! Wait for the specials! Can't wait for a fishing video, the great northern pike!
@SolarfallBaits3 жыл бұрын
It really depends when i can afford to buy an action camera to film any fishing.
@funkypat53493 жыл бұрын
@@SolarfallBaits I hear you there, those aren't cheap! I would imagine you need a boat as well, or did you manage to ship it over?
@artcliff46312 жыл бұрын
Every time I watch one of your videos It makes me to Want to make my own lures
@compostelaysusalrededores12502 жыл бұрын
Excelent broo!
@ukaszdabski63013 жыл бұрын
You make my day ! I'm jealous ! It's a pretty good job :-)
@alucard13492 жыл бұрын
So beautiful.
@alessandrofranciscodasilva14023 жыл бұрын
Parabéns pelo seu trabalho... Incrível. Admirando pra caralhooooo rsrs 👏👏👏👏👏👏👏 Se der, mande uma de presente pra eu usar aqui no Brasil... Sucesso...hoje é sempre...
@fngrusty423 жыл бұрын
Love the look fishermen would buy but the fish wouldn't care... plus you should have bigger hooks. Now with all that said very beautiful job. Your skill is exceptional.
@czechcaptain90402 жыл бұрын
精致的艺术品!太棒了
@uilsongodoi69573 жыл бұрын
beautiful
@adearifianto2483 жыл бұрын
Good job...👍
@adearifianto2483 жыл бұрын
I Will make for you how simple make crankbait...Verry simple...ok👍👍
@user-lk2sk7gu4x3 жыл бұрын
Тоже делал воблерки из трех частей для дальнего заброса все хорошо только плестиглаз ломается об дно особенно в ноябре когда вода холодная
@DONBGWEST3 жыл бұрын
I’m sure you already know the ‘baking soda and superglue’ trick. That would have worked great for securing the through-wire if you immediately wish to continue working on it 👍🏻 it also allows instant sanding if you use it instead of the bondo to secure the lead 👌🏻 Amazing work as always 👌🏻👌🏻👌🏻👌🏻👌🏻
@SolarfallBaits3 жыл бұрын
i usually work with batches of baits so i don't really require an instant dry time. usually when i'm finished with the last bait i can start sanding the first one.
@DONBGWEST3 жыл бұрын
@SolarBaits That makes sense! 😂👍🏻 I’m not even a lure angler (I tie pike flies) but I still love watching you and also Marlin Baits 👌🏻👌🏻👌🏻
@ColinB893 жыл бұрын
Immortal - At the heart of Winter. To me, the best ever black metal album. Oh, and the bait is pretty damn nice, as expected. It's really nice to see you do a crankbait. Greetings from the Netherlands
@SolarfallBaits3 жыл бұрын
At the heart of winter was one of my earliest black metal albums i heard so it always will have a special place in my heart altough i think overall my fav is pure holocaust.
@ColinB893 жыл бұрын
@@SolarfallBaits that one's fantastic too, agreed. Btw, would be real nice to see you make a spoon again. Also cause for all i know they still like to use them up there in canada. Blashyrkh mighty raven spoon.
@61diemai3 жыл бұрын
I never liked to shape the lurebody with wire harness and lip already glued in , as these often get in the way of knife strokes and sandpaper passes . To overcome this , I had just pinned the two halves together with two or three crosswise pins(pieces of toothpicks or kebab sticks or wire pins) right after having them sawed out , so that I could work them down symetrically and afterwards still be able to separate them again before any glue would be applied . Best greetings , Dieter
@fliaotero93943 жыл бұрын
Genio!!!!👏👏👏🎣🐟🐟🐟
@Xminion2 жыл бұрын
One of my favorite album from Immortal 🤘🤘
@SolarfallBaits2 жыл бұрын
💪🤘
@douglascarkuff19692 жыл бұрын
Beautiful bait. I have made a few deep divers. some worked and some did not. I don't know enough about the physics to understand why. I sometimes have an issue with the bait wanting to dive, but not wobble - it does this porposing thing, bobbing up and down, but not side to side. do you have any thoughts what I am missing in my understanding? Tried moving the line tie up and down the lip. Thanks.
@rRichmoo73 жыл бұрын
Great job thanks for the info. you selling any baits currently?
@joseluistiernoorcajo16563 жыл бұрын
Artista!!
@juliocesarselva2 жыл бұрын
😀Finalmente Achei um brasileiro!!
@MarcosMVlures3 жыл бұрын
Excellent video, I asked for a striper but its ok... hahahah I asked for a golden dorado swimbait as well and it never came either... hahah Great job AGAIN!!!
@SolarfallBaits3 жыл бұрын
I actually like the golden dorado swimbait idea so i might do it at somepoint.
@MarcosMVlures3 жыл бұрын
@@SolarfallBaits Dont play with my emotions please! Greetings from Argentina
@anasheh11763 жыл бұрын
I've been waiting for this
@brianjones8663 жыл бұрын
Yes me too
@fendikriandrias26668 ай бұрын
Pefect disind ❤❤❤
@thelonesomefisherman74253 жыл бұрын
My friend Todd used to make The Phantom Lure line of muskie glidebaits before he passed away a couple of years ago. I'd hang out at his shop and watched him work. When he did his final epoxy clear coat he'd take a Bernzomatic propane torch and lightly sweep the heat over the epoxy. This brought the air bubbles to the surface where they'd burst and disappear. Then he'd put the lure on the rotating drying rack. Hold the flame away from the lure about 1 to 2 feet. You don't want to burn the lure, just lightly heat it enough so the air bubbles disappear. A couple of quick passes with the torch should do the trick.
@SolarfallBaits3 жыл бұрын
I do the same thing with a hot airgun to get rid of the bobbles.
@thelonesomefisherman74253 жыл бұрын
@@SolarfallBaits Sorry, I didn't know you knew about that method. I enjoyed the video. Thanks
@SolarfallBaits3 жыл бұрын
@@thelonesomefisherman7425 no worries i dont think i showed it in the video.
@sokauo3 жыл бұрын
They look amazing! D'ont you have a bandsaw? I think you will like having one.
@SolarfallBaits3 жыл бұрын
I dont have one yet, but it will be my next big purchase.
@Rumka19803 жыл бұрын
Love videos from you. Could you share the "biggest secret" what are you using for cleaning brush after applying epoxy? or is it a new brush after each bait? :)
@SolarfallBaits3 жыл бұрын
I keep them in a jar of acetone.
@TheLusus3 жыл бұрын
Nice video! That carving knife with a red handle you use looks very mutch as a classic Morakniv. Is it maybee a tool you brought from Soumi? Greetings from Stockholm!
@SolarfallBaits3 жыл бұрын
Yeah i brought it from Finland with me. I Bought that knife from a country fair 20 years ago and its precious to me.
@D4vE483 жыл бұрын
Fantastic skills, which make it look way too easy =) One question: what is the magical brush you use for Epoxy coating, or how do you treat it after coating to keep it soft and bendable?
@SolarfallBaits3 жыл бұрын
Its just a normal paint brush that you can buy from home debot.
@depikebustergonewild57012 жыл бұрын
Hi. love the finish on your lures. Can you tell me which epoxy do you use to finish them off
@SolarfallBaits2 жыл бұрын
I mention the brand in the video.
@goovaerg3 жыл бұрын
Great great. I've seen you use those lead cilinders a lot. How do you make these
@SolarfallBaits3 жыл бұрын
With a simple 2 piece mold
@evankeller42533 жыл бұрын
Hmmmmm, do I see some PCR and genetics literature... Hahahaha awesome crankbait too🤘
@SolarfallBaits3 жыл бұрын
Nicely spotted 😁
@RunningHauki3 жыл бұрын
One day you will have to make something shitty so I don’t say the same thing every time. Great work Mikko! Nice action on that one.
@winpancing96102 жыл бұрын
Thanks . Niceeee
@beetleb18013 жыл бұрын
Seeing as you have a dremel, why not use it to cut a groove for your through wire to sit in? It makes for a nice, snug fit and you dont need to make all those fiddly spacers! That's how I do my two-part baits. Fantastic overall result though. Great work!
@SolarfallBaits3 жыл бұрын
Sure i could have done that and i have in the past, i just wanted to try something different this time around.
@HUGOBAITS3 жыл бұрын
Beetle B that’s exactly what I was thinking! A lot of extra work same result
@rossprice85863 жыл бұрын
@@SolarfallBaits I like it! Probably stronger and more balanced!
@aplures-MI3 жыл бұрын
Ciao dove hai comprato la fresa del Dremel? Che modello è?
@danielcrbl3 жыл бұрын
wauuuu .... super
@andyost49062 жыл бұрын
Top Top Top 👍👍👍
@fishing48763 жыл бұрын
Great job! Beautiful baits! However, the technology is rather complicated and time-consuming due to the wire loops. I make it much easier and faster from a solid piece of wood, because I use a screw-in loop. 18:15 And in order for the paint to hold well, I must, before painting, process the surface with sandpaper so that it becomes dull and only after that I apply a primer and paint. It is very important ! And I showed this in detail in my videos...
@SolarfallBaits3 жыл бұрын
Its true that there are easier ways of doing this but would defeat the purpose of showing an alternative way of going about this and thats kind of the whole point of the video.
@fishing48763 жыл бұрын
@@SolarfallBaits OK. Each method has its own advantages and disadvantages.
@fishing48763 жыл бұрын
@@SolarfallBaits OK, that's right. Each method has its own advantages and disadvantages.
@brianjones8663 жыл бұрын
Oleg your pretty good but ................🤷🏻♂️🤦🏻♂️
@paddlehooked46873 жыл бұрын
Thanks for the detailed video. Learning a lot watching your builds. It is clear to me that I’ve got lots of room to improve. By the way, I listened to SolarFall. At first, really was digging it, but that vocalist.... I’m sorry, not my cup of tea. Instrumentally, they’re amazing.
@ANGLERPRITAMMHATRE3 жыл бұрын
Nice
@ANGLERPRITAMMHATRE3 жыл бұрын
Hi bro .can you make wooden crab lure .hooks in clows.
@carstenvalentina3 жыл бұрын
Go by Feel, Thats your TradeMark
@SidiSidi-sp2qk2 жыл бұрын
Good job bro..??
@KimDon7an3 жыл бұрын
Moi moi! Stunning work as always, what airpressure do u run on your compressor when u do these kind of color pattern? //Kim Mäki
@SolarfallBaits3 жыл бұрын
I change it depending on the paint i use. I usually keep it around 2 bar
@Razzy3163 жыл бұрын
Have you tried ultra thin super glue and baking soda instead of bondo to fill the lead holes?
@SolarfallBaits3 жыл бұрын
Yeah i have and dont really like that method myself.
@valtercaricchia73383 жыл бұрын
il plexiglass che spessore?
@bbinkley18612 жыл бұрын
What kind of wire do you use on the body for your loops?
@SolarfallBaits2 жыл бұрын
Stainless steel wire
@victorianomg37822 жыл бұрын
Everything perfect, except the way of drilling to introduce the counterweight. Very dangerous.Thank you.
@SolarfallBaits2 жыл бұрын
Life without little danger is boring.
@paulbowkunowicz69602 жыл бұрын
where do you get those wire bending pliers from...or what are they called
@SolarfallBaits2 жыл бұрын
They are called round nose pliers. Any well stocked hardware store should have them.
@paulbowkunowicz69602 жыл бұрын
thank you
@JONNIE_ROCKER3 жыл бұрын
👍👍 Terve.
@user-fg2jd7wi5s3 ай бұрын
👍👍👍👍👍
@thewarpsyrhead3 жыл бұрын
What size wire did you use on the lips?
@SolarfallBaits3 жыл бұрын
1mm
@AngryGumball2 жыл бұрын
How do you keep your wood from splitting when making the weight hole? I tried with a drill when making a simple lipless bait and ended up splitting part of the nose off. Also what kind of wood?
@SolarfallBaits2 жыл бұрын
It really helps if you use quality drill Brad point drill bits, fostner bits will work nicely as well. To be honest I don't recall what type of wood this was, it came from wood palette so it could be anything.
@AngryGumball2 жыл бұрын
@@SolarfallBaits thanks, will look into some proper drill bits, quicker than dremeling out the hole to a specific diameter, save the dremel for shaping and carving :)
@bestialdeath63 жыл бұрын
Did you move to Canada just so you could get closer to Blasphemy? And maybe get them to, finally, record a third album? ;)
@MrTroutbum243 жыл бұрын
What kind of wire do you do for your baits?
@SolarfallBaits3 жыл бұрын
Stainless steel piano wire. On these the thickness was 10mm
@duanevigue16032 жыл бұрын
What size wire are you using there?
@SolarfallBaits2 жыл бұрын
1.0mm
@juliocesarselva3 жыл бұрын
Como posicionar corretamente a barbela
@michaelmannucci85853 жыл бұрын
What is the red stuff you mix into the bondo?
@SolarfallBaits3 жыл бұрын
Excelerator
@michaelmannucci85853 жыл бұрын
@@SolarfallBaits Thanks for the reply. Your paint-jobs are amazing. They inspire me. Though, I should probably figure out how to make my lures have a proper action first... lol
@abdulkahfi45922 жыл бұрын
😍😍
@agentsixx43432 жыл бұрын
You need a online store that hav PayPal so I can start ordering. Make that happen and you’ll be getting purchases from