M*CARBO Ruger PC Carbine AND PC Charger Flat Trigger Upgrade! How To Install

Get Here - www.mcarbo.com/ruger-pc-carbi...
One Trigger Compatible with both PC Carbine and PC Charger!
The Ruger PC Carbine Trigger Upgrade has a flat-faced design which allows the Shooter to place their finger lower on the trigger face, maximizing leverage and lowering the feel of the trigger pull.
Precision Machined 6061 Aluminum Ruger PC Charger Flat Trigger won't flex or warp under rapid fire like the factory plastic trigger! Aftermarket Aluminum Trigger Upgrade corrects Ruger PC Carbine Problems with Plastic Factory Trigger. Ruger PC Carbine Flat Trigger design allows the shooter to pull straight back, making it easier to tell if you’re pulling too far to the left or right.
Please refer to the timecodes below for specific chapters.
TIMECODES:
Intro - 00:00
Tools Needed - 00:11
Stock Trigger Pull - 00:29
Disassembly - 01:05
Installing New Trigger - 02:56
Reassembly - 05:41
Function Check - 06:45
Modified Trigger Pull - 07:03
#ruger #pccarbine #pccharger

[@markcmann]

I have the original version of the MCARBO Ruger PCC trigger and I really like it (it has an average of 3 lb. 5 oz. pull weight) so this is not an essential upgrade for me. But for anyone who has the OEM trigger, this is a great upgrade. 👍

[@kevinallies1014]

I didn’t see this video until about 30 minutes after I finished installing the trigger and an extended bolt catch but I picked my way through the old one with Chris doing the work and it came out fine. But I will in fact be taking it to the range as soon as possible.

[@oceantri]

It’s got a nice stock trigger.

[@brudamiranda3314]

I freaking love MCARBO. I inform all my friends and family to check you guys out. I installed g19 trigger spring kit in my PSA dagger it's so much better!

[@OiBoi90]

As stated up top I have the 1st gen flat trigger an I have a trigg pull of about 3.5 to 3.7 an love it. Just here to say you can never go wrong with Mcarbo parts though.

[@stevea6722]

Looks virtually identical to a 10/22 trigger group

[@squigglyphrank9348]

I made it easy my dude

[@SERBDVB]

Thx brother much appreciated Cheers 🍺🍻🍺

[@ericb.4358]

TIP: Polish the sear and hammer where they touch. This will make the trigger pull a little lighter (reduced friction) and more consistent in pull weight. Use a DREMEL tool, polishing felt tip bit and automotive rubbing compound then polishing compound.

[@brudamiranda3314]

Tell Kris Nelson BRUDAMAN SAYS HI !!!😎🙏🙌

[@kevinturpin7937]

Wonder if you can use the flat trigger with Franklin binary Trigger assembly

[@PANOPTIC-VIDS]

Can I use this trigger on my Ruger 22 take down