I watch shaping videos as much as I watch surfing it self. It’s so relaxing watching someone shape one. I’m from West Michigan we have a growing surf community. My Dads buddy use to shape out of his backyard in our area.
@Shrednaught Жыл бұрын
Yew! Cheers man
@mdc18023 жыл бұрын
I've often thought I'd like to try shaping boards... until now. You're an artist and a tradesman. Even if I could do it, the stress would kill me. It's a beautiful board. Well done.
@Shrednaught3 жыл бұрын
Thanks mate 🤘 Don’t be discouraged from having a go and shaping your own board. Just keep it simple and take your time. I’ll be putting more “ tutorial “ type videos up soon or just msg me if you need any help. Yew! 🤙
@rzadigi Жыл бұрын
@@Shrednaught yea I was equally discouraged. Haha. I didn’t realize so many different tools were needed and how many skills one person needs to build a board. This was exactly what I wanted to see. Your talents are very impressive. I’m hoping to build a board if I can get my hands on some of that Artic bio foam 🙏❤️much respect and love from Japan
@markcreamer3196 Жыл бұрын
I love that board, where can I get the template, love your work, love your boards
@ChrisVidouras3 жыл бұрын
Never had an interest in surfing, even though it's one of the coolest things we've come up with as a species. I was always really shocked by the prices of the boards though! Now I get it, great work and cheers from Greece!
@Shrednaught3 жыл бұрын
Thanks man 🤘
@Denyy3 жыл бұрын
Yeah the amount of time it’s takes to make one ☝️ and the material is what really makes it expensive but fun to make
@stephenbrown6642 жыл бұрын
Hey Shred, Your work is fantastic! The mid length thruster is exactly what I need.. Will order a blank down and get started.. Thank you for the inspiration...
@Shrednaught2 жыл бұрын
Yew! Get at it mate 🤙
@benrichards60503 жыл бұрын
amazing craftmanship dude - boards are such a work of art & skill !!! yeauuuu !!
@Shrednaught3 жыл бұрын
Cheers dude 🤘
@donatkinson15963 жыл бұрын
Another banger - I'm loving these vids (and the workmanship is next level). Thanks heaps!!!
@Shrednaught3 жыл бұрын
Thanks mate. 🤙 appreciate it
@snnneto53 жыл бұрын
best surfboard building video out there! thanks
@Shrednaught3 жыл бұрын
Yew! Thanks man
@WaveWasters3 жыл бұрын
Board looks awesome! Those one pass bits look so much faster then having to swap bits out for the two sections of the box.
@Shrednaught3 жыл бұрын
Thanks mate. Yeh 100% . They’re worth every penny 🤘
@benjaminlove8805 Жыл бұрын
Sick board, sick color, sick vid!
@fishmut2 жыл бұрын
Absolutely beautiful surf board , love it , awesome work on that board buddy , quality workmanship producing a board to be proud of , 👍.
@Shrednaught2 жыл бұрын
Cheers mate. Appreciate it 🤙
@bacpackingmysoul2 жыл бұрын
This is beautiful man , I love your details
@Shrednaught2 жыл бұрын
Yew! Thanks mate
@zachsmith32993 жыл бұрын
love these videos. that third fin is a crime ;)
@Shrednaught3 жыл бұрын
Haha yeh I had sleepless nights after putting that in. 😅
@NeilAtkinson-kr5qp Жыл бұрын
Sooo epic mate, learnt so much!
@Shrednaught Жыл бұрын
Yew! Cheers 🤙
@EN-qo5yh Жыл бұрын
Thanks!
@rwbmusicuk Жыл бұрын
wicked board mate! looking to get into shaping after I finish university, appreciate the vids!
@sealanimccall1787 Жыл бұрын
Hey great video. Just to recap, u sanded, laminated bottom with a tint, sanded top, laminated top with clear and then hot coated it, sanded bottom and installed fins, then hot coat the bottom, sanded everything, then did a final hot coat for entire board before final clean up? just trying to follow the steps for the board i am shaping at home!
@Shrednaught Жыл бұрын
Sounds about right mate.
@francomunoz2292 жыл бұрын
Beautiful board
@6to6surf43 жыл бұрын
Awesome board mate, keep it up!
@Shrednaught3 жыл бұрын
Yew! Thanks
@freeheeldude2 жыл бұрын
Lovely looking board
@Carkshark3 жыл бұрын
Great editing!
@Shrednaught3 жыл бұрын
🤙
@alexanderturl3 жыл бұрын
Sick shape mate, looks fast. Cheers for the vid.
@Shrednaught3 жыл бұрын
Yew! Thanks mate 🤙
@salvadorgar80613 жыл бұрын
love it! terrific footage mate!! board looks awesome!
@Shrednaught3 жыл бұрын
Thanks mate 🤙🤙
@selwynrowe3783 жыл бұрын
Nice board, great colour dude, thanks!
@Shrednaught3 жыл бұрын
Yew! Thanks 🤘
@JohnnyK-tf6ig Жыл бұрын
Great job! Is that just one layer over the fin boxes, 4 or 6 oz? I usually do footballs and have two layers but that’s on a clear lam. I hate these newer Futures boxes with the holes in the flange. Bubble city lol, makes me nuts, especially under two layers. I’ve been using One Shot Lettering enamel for my pin lines, you should check it out. I do it right over the sanded/polished hot coat, looks and feels like resin pins. Super durable and easy to use.
@danvargo90753 жыл бұрын
Awesome board and another great video. It looks like you didn’t tape off the rails when hot coating the deck. It makes sense and I haven’t seen it before, but I’m going to try that out. Also, is that a standard pad on that orbital sander. I haven’t been able to find a medium or softer pad. The one I have is pretty firm, it works great on fin boxes but I’d prefer to have on that is a bit softer/more forgiving to sand the flats. But I can see the benefit over using a regular sander/polisher. Anyway, awesome content. I use your technique of setting the fin boxes after laminating with tint as opposed to before the lam. I’ve been very happy with how much better it comes out. Keep the videos coming!
@Shrednaught3 жыл бұрын
Thanks mate. Yeh for the initial fill coat I don’t tape and let it drip, then I push it around the rails and onto the lap. Then when it’s dry you can easily sand you bottom laps flush in prep from the bottom fill coat. Makes it so much easier and less tape used. I use just the standard pad mirka sent me. It’s pretty firm/hard. For your initial sand you want to try hit the flats with a hardish pad to get them nice and flat. Then change to a medium/soft on a higher grit. Hope that helps 🤙
@ollmighty4922 жыл бұрын
Where do you get your foam from for the boards. I loved the colour at the end.
@Shrednaught2 жыл бұрын
Burford blanks. Thanks dude. 🤙
@Detudoumpouco-cn4yc3 жыл бұрын
Amazing work! Congrats man!
@Shrednaught3 жыл бұрын
Thanks man 🤙
@James-nj4pc3 жыл бұрын
Nice man!! Looks great.
@Shrednaught3 жыл бұрын
Thanks mate 🤙
@jaymac19153 жыл бұрын
Sick shape mate!
@Shrednaught3 жыл бұрын
Thanks man 🤙
@mag62873 жыл бұрын
More power to u bro /////////////dont surf but watch a lot of your vids ///////// your talent is amazing just great to watch you do your craft ////////////// cheers to u
@Shrednaught3 жыл бұрын
Thanks man. Appreciate the kind words 🤙
@centurionboards3 жыл бұрын
Great work dude! 💪
@Shrednaught3 жыл бұрын
Yew! Thanks man.
@waynebull81773 жыл бұрын
Love watching this. How many hours to shape mate, then glass to finish. If you were doing this for a client.
@Shrednaught3 жыл бұрын
Probably around 4 hours to shape. Not sure how long for glassing as it’s such a staggered process. But a few days at least
@waynebull81773 жыл бұрын
@@Shrednaught great job, a true Tradesman
@Shrednaught3 жыл бұрын
Thanks mate 🤙
@anon87302 жыл бұрын
What marker do you use? Ive used acrylic and alcohol base. Alcohol was a disaster and acrylic started to bleed a little as well..
@Shrednaught2 жыл бұрын
I use posca pens. Always on top of the fill / hot coat. Then a sealer over that 🤙
@PalmShapes Жыл бұрын
very nice, I love it. Is it a single concave to vee ?
@Shrednaught Жыл бұрын
From memory yes.
@andreapazzaglia54352 жыл бұрын
This is art 😍
@Shrednaught2 жыл бұрын
Thanks mate 🤙
@andresq42933 жыл бұрын
Love your videos and your boards. Couple of questions. What foam are you using and what grit sandpapers do you use on the gloss coating?
@Shrednaught3 жыл бұрын
In this video PU and it depends on the finish wanted. For matte I’ll go 320-400 for polish 2000 and then on to polish
@marccefalu9741 Жыл бұрын
Shrednaught, awesome video! As usual my friend! I am in the process of building a similar shaped board but shorter and thinner..more of a step-up/big volume shortboard....I see that you used some single concave action, wondering what your thoughts are on slight vee/roll in the nose to single concave in the. middle to double under back foot? I know it sounds overly complex, but I love concaves but also want that ability to get into critical drops on steep waves...if that makes any sense....
@Shrednaught Жыл бұрын
Yeh that makes sense. A lot of big wave boards will utilise V in the nose to mitigate the choppy water and almost push through like a boat. Sometimes too much concave on big wave boards can catch air beneath them. So I guess what im saying is sometimes less is more. 👌
@delz85203 жыл бұрын
Awesome board man. Do you ever get burn-through's when sanding the hot coat? Curious to see if there's any particular grit you sand with from the start to avoid them. cheers!
@Shrednaught3 жыл бұрын
Hey mate, I’d be lying if I said I didn’t hit weave from time to time.. as anybody that’s sanded surf boards would as well. With my sanding I start at 80 and work up BUT I am using mirka pads so if it was just normal sand paper I’d start at 120 and if it was a good fill coat 180
@lalaboards3 жыл бұрын
Burn Throughs happen all the time. They are easily fixed by another coat of resin until the whole board is flat and sealed
@MrRickyrecon3 жыл бұрын
I don't know who Tom is but I think he is going to catch a ton of sick waves!
@Shrednaught3 жыл бұрын
Hah he is loving it man 🤙
@walter9923 жыл бұрын
Just curious how many total hours from start to finish. Classic lines with a classic V.
@Shrednaught3 жыл бұрын
Hard one to answer mate. There’s a few hours in between resin hardening but at a guesstimate around a 5-6 days 🤙
@markcreamer46493 жыл бұрын
@@Shrednaught Id love to get a template my email is tricobuilders@yahoo.com Thank you very much Mark
@Shrednaught3 жыл бұрын
@@markcreamer4649 just sent it you mate 🤙
@markcreamer46493 жыл бұрын
@@Shrednaught thank you so very much Where are you located
@Shrednaught3 жыл бұрын
@@markcreamer4649 all good mate 🤙 I’m in Margaret River, Western Australia.
@fernandopalacio40264 ай бұрын
Hi friend, poliester resin or epoxy? thanks good job!!!
@I.Nicoll-SeaCritts Жыл бұрын
Hey mate I have a strange question, what music is playing at 15 min as it has been stuck in my head for days now? It fits well with the video which because of the music is also stuck in my mind. Love your work,. I dont know how many times ive watched this 🤙
@emersonfelipe9598Ай бұрын
How did you make the calculations on the paperboard which you used has mold?
@rodrigomacedo42832 жыл бұрын
Greetings man! Thank you for the excellent video man! It has been some time now that I have followed some of your work as I am actually trying to build my own stuff. I am actuallu at the moment building one very similar to this one, and I have a question in I may. I have seen the installtion of future fins, and some people do it before lamination (in the foam) but here you do it after lamination and then you laminate again with the tail pad. Is there any specific reason why you do it? Thank you!
@Shrednaught2 жыл бұрын
Yeh mate, I do this because of the tint. If it’s a clear I’ll install in the foam but with tints it looks cleaner this way. If you don’t see any air bubbles through the tint and then sand them open it just looks messy. Both ways work and there is pros and cons to both. Just do whatever works better for your situation 🤙
@rodrigomacedo42832 жыл бұрын
@@Shrednaught got it! Thank you man 👍
@benrichards60503 жыл бұрын
waiting for a new board of my shaper - amped now !!
@Shrednaught3 жыл бұрын
Yew!
@mikesaumell29029 күн бұрын
Where ya been shred?! We miss your epic videos Hope all is good 👍
@markcreamer46492 жыл бұрын
Love that board, where can i get the template, Thank you
@Shrednaught2 жыл бұрын
What’s your email mate. I’ll send it to you.
@markcreamer46492 жыл бұрын
Love the board Love how good you do your work What size is it And where can I find a template like that Thank you
@Shrednaught2 жыл бұрын
From memory it was around the 7’ mark. You can go to blending curves website to get free templates or you can try make your own on the IShaper app. Also free. Cheers mate 🤙
@enguerrandbonnet219 Жыл бұрын
what router bit are you using for the fin boxes?
@Shrednaught Жыл бұрын
Futures. You can purchase directly from them
@Md-zs1zr3 жыл бұрын
What’s the reason behind the first deck layer only going 3/4 of the way up and the v shape cut?
@Shrednaught3 жыл бұрын
Generally you wouldn’t stand on the nose section of the deck so the extra glass isn’t needed in that space. The V cut spreads the stress load out hopefully creating a stronger build and less breakage as it’s not a straight line to snap at.
@youyiulian43162 жыл бұрын
Hey ,can i paint my surfboard after glassing it with epoxy ? Thank you so much
@Shrednaught2 жыл бұрын
Yes you can. But make sure you only do it after the fill / hot coat and not on the laminate stage. Seal it after with a clear acrylic sealer to protect it
@youyiulian43162 жыл бұрын
@@Shrednaught thank you 🙏🙏🙏
@chrisross63942 ай бұрын
Why did you put the fin box in after laminating.
@Denyy3 жыл бұрын
what did you use to trace the rail lines before you glassed 8:02 please tell me
@Shrednaught3 жыл бұрын
That’s just a simple scribe tool. You can buy them from a hardware store. They have the measurements and then a little spike to scratch then width with
@Denyy3 жыл бұрын
@@Shrednaught thanks did you use that for lining out the rails
@Shrednaught3 жыл бұрын
Yup I use that for rails. I just do a light scratch and then the scratch mark sands out when you blend the board
@Denyy3 жыл бұрын
@@Shrednaught also I wanted to ask when glassing should I use 2 4oz glass on top and 1 4oz on the bottom
@Denyy3 жыл бұрын
@@Shrednaught also did you do another hot coat after doing the pin lines
@dudeleboski26923 жыл бұрын
Do you ever put a bit of filler coat resin on the rail laps (deck side) when you do a tint? (For easier sanding). Is the roller method sufficient to lower the cut lap to avoid air bubbles? I only ask, because you do it to the bottom lap.
@Shrednaught3 жыл бұрын
Generally no. If you get the roller on a clean cut lap before it gets full cured it works perfect. Only sanding is at the nose and tail and I just hit them with some 80grit. Sometimes you’ll see me run the sander along the lap line even though I did the roller but I’m generally just being pedantic there 🤷♂️
@joegreen98273 жыл бұрын
another killer video thanks
@Shrednaught3 жыл бұрын
Cheers mate 🤙 I’ve got some more in the pipeline. A few different ones as well
@Denyy3 жыл бұрын
What grit were you using for sanding the board at the end
@Shrednaught3 жыл бұрын
320
@seanbull53792 жыл бұрын
What was the little black roller for when you used on the edge of the first layer?
@Shrednaught2 жыл бұрын
It’s a firm rubber roller. When doing a cutlap I use it to push the laps ridge line down into the foam. Makes it flush with the foam and prevents air getting trapped there with the deck layers
@Bido115613 жыл бұрын
You always cut the fin boxes after the first layer of glass? I hate cutting straight on the foam, think I’m gonna start using your tail patch method also, looks clean! You using “football” patches over fin boxes under tail patch layer?
@Shrednaught3 жыл бұрын
I do it whenever I’ve done a colour tint. It makes the boxes look cleaner and much easier to do although it does add a step to the glassing process. Yeh mate I’ll do a 4oz football then a tail patch of 4 oz over top
@Bido115613 жыл бұрын
@@Shrednaught nice thanks! Could never make sense of how the boxes look so clean with color
@rioadamn Жыл бұрын
Im curious about what kind foam do you used ??
@tomb42913 жыл бұрын
Hey mate, can I ask why the angle with planning? I usually just plane straight but recognise most plane on the angle?
@Shrednaught3 жыл бұрын
Planing on the angle stops the front shoe front falling into the grooves from the last cut. Keeps things level
@tomb42913 жыл бұрын
@@Shrednaught thanks mate, makes sense!
@enguerrandbonnet2192 жыл бұрын
What kind of resin do you use for the leash plug? Thanks!
@Shrednaught2 жыл бұрын
Lam resin with chopped glass fibres
@enguerrandbonnet2192 жыл бұрын
@@Shrednaught awesome thanks!
@RampageSport3 жыл бұрын
I want to get started with shaping my own boards. But I don't know what sand paper grit to use when. Could you help?
@Shrednaught3 жыл бұрын
You can start with 40 to rough out then work up . 80-120-180 finish This is for shaping. Sanding is a different beast
@markcreamer31966 ай бұрын
How can i get this template I love this board
@cliffboule83953 жыл бұрын
Question: Isn’t there a lot of error in a template thats in so many pieces? Why doesnt it come in a strip? BTW the board looks nice.
@Shrednaught3 жыл бұрын
Thanks mate🤙 The template pieces have two sections to line up on and then if you get it all correct it should line up on the stringer line top and bottom. You do need to get it perfect though.. unfortunately a home printer can’t print a strip. You could get it printed from a professional print shop as a strip but that’s more expensive and as it’s a one off I can’t justify it.
@rabidwookie606 Жыл бұрын
Beautiful job. But I thought the MOTE was a twin ?
@Shrednaught Жыл бұрын
Thanks mate. This was a twin but the owner decided to place a trailer box in as well. In case he wanted to play with a Centre fin when it got bigger. The centre box isn’t a usual thruster configuration but placed further towards the tail to accommodate the tiny little trailer fins you get with the upright keel set ups.
@simonlj13 жыл бұрын
Very nice board indeed.
@Shrednaught3 жыл бұрын
🤙thanks
@seif14963 жыл бұрын
Board looks great! What's that scissor-y tool you use to measure thickness called?
@Shrednaught3 жыл бұрын
Thanks mate. Surfboard Calipers
@angeloalves90393 жыл бұрын
Beautiful job! just one thing, why the side fins are futures and the middle one has an X where usually is the futures logo? Cus I bought futures fin boxes and some are not original I guess and I don't know if I should use them or not. Anyway, great work mate 🤙🏾
@Shrednaught3 жыл бұрын
Thanks mate 🤙 The side futures fins have the F on them and the centre boxes always has the X I guess it’s just so you can tell they’re different depths and you don’t install the wrong box in the wrong location.
@angeloalves90393 жыл бұрын
@@Shrednaught Nice, I've never thought of that, thank you mate🤙🏾
@Shrednaught3 жыл бұрын
@@angeloalves9039 good luck man 🤙
@lalaboards3 жыл бұрын
How is putting the pieces of paper together ? I printed them years ago I think 2007 and I didn’t have the patience to put them together I think now I’d be a lot better at it. I followed you on Instagram yeah I’m gonna go print out some templates and see how it works out.
@Shrednaught3 жыл бұрын
It can be tedious that’s for sure…The programs now have some fairly easy lines to get the A4 sheets to match up so it might be a heap easy than 14 years ago.
@ang_sarimanok3 жыл бұрын
On eps foam is it better to use microplane blade on the surform?
@Shrednaught3 жыл бұрын
It definitely tears less. You can also use 40 Grit
@ang_sarimanok3 жыл бұрын
@@Shrednaught thanks man!
@ang_sarimanok3 жыл бұрын
@@Shrednaught we have a little shaping bay in the Philippines we do mostly eps epoxy boards... let us know if ever you are in the country we have good waves here too
@Shrednaught3 жыл бұрын
Yew! 🤙
@nauticalstar83633 жыл бұрын
Beautiful board! Do you mind if I ask how much does that board cost in U.S. dollars?
@Shrednaught3 жыл бұрын
Thanks mate. I’m Australian so here I charge about 800-850 so I guess in USD that would be around 650 mark. 🤙
@LAWUFO2 жыл бұрын
Hey Shred! Love the work you're doin! I only follow 4 shapers and you definitely make that list! Question: Where can I get those shaping racks you use? ....Rich
@Shrednaught2 жыл бұрын
Thanks mate. I bought them from shapers.com.au They’re perfect although they were expensive.
@markcreamer3196 Жыл бұрын
@Shrednaught I love that board, where can I get that template, love your work and really love your boards
@warrend68522 жыл бұрын
How many hrs go into making 1 board?
@Shrednaught2 жыл бұрын
Kinda depends on the board and finish but about 4 hours shaping and then about 3 days through the glassing process. That’s a quick one too. All focus only on the one board
@damien-kloot3 жыл бұрын
Your videos are awesome. What is the tool called at 19:45?
@Shrednaught3 жыл бұрын
Thanks mate. That’s just a plunge router
@JenovaImproved3 жыл бұрын
Is that a random orbit sander you're using that's connected to the vacuum line? I thought you weren't supposed to use random orbit during sanding.
@Shrednaught3 жыл бұрын
Yeh mate, it’s a mirka deros 5 which isn’t a standard orbital. Generally it is faster to use a sander / polisher as the have more grunt but they don’t have a way to extract dust and I don’t have a dedicated sanding room. I definitely recommend the mirka. Check them out online. 🤙
@joaquimbaylon43713 жыл бұрын
What cloth did you use for laminating?
@Shrednaught3 жыл бұрын
E cloth 6oz bottom double 6 deck from memory
@tommcnatt61703 жыл бұрын
Great board and awesome video. I'm recalling digging your Mirka sander. Which model do you use?
@Shrednaught3 жыл бұрын
Thanks mate. It’s the mirka deros 5.0
@Shrednaught3 жыл бұрын
Thanks mate. It’s the mirka deros 5.0
@anon87302 жыл бұрын
tape line all by eye balling it??
@Shrednaught2 жыл бұрын
I do place a line on the foam but I use a light scratch rather than pencil or pen line. I find it easier to hide. I don’t think it shows up very well on the videos though.
@anon87302 жыл бұрын
@@Shrednaught with a self made tool? i screw up those lines with tools i've made a professional would be best. any recommedation? thanks love the content!
@Shrednaught2 жыл бұрын
I use a scribe from Stanley tools. You can make your own from foam scraps but honestly for a few bucks you can’t go wrong with a bought one.
@sash98533 жыл бұрын
Sick board and I bet it took a while to make that little fin key haha. Question for ya, after sanding your lams what do you clean the board with before hot coating? Just a tape pull and air compressor?
@Shrednaught3 жыл бұрын
Thanks. The fin keys i make with moulds and left over resin. Yeh I just use compressed air and tape. Just make sure if using air that it’s oil less so it doesn’t spit it all over the board.
@maxloughlin99713 жыл бұрын
Nice work mate you’ve got talent it would be a great single fin too 🤙
@Shrednaught3 жыл бұрын
Thanks mate. Yeh definitely be good as a single too
@levorlov40653 жыл бұрын
Love it
@Shrednaught3 жыл бұрын
🤙
@porronquilmes3 жыл бұрын
Beautiful board, great video! Quick one, you placed two 6oz layer on the deck?
@Shrednaught3 жыл бұрын
Thanks 🤘 yeh that’s correct. One 6oz patch 3 quarters of the way up and then the full 6oz deck
@stephenbrown6642 жыл бұрын
Can you let us know the dimensions. Wide point position.. Thank you.
@Shrednaught2 жыл бұрын
7’2x21 wide point @ 46.6”
@alienxyt3 жыл бұрын
nice shape!
@Shrednaught3 жыл бұрын
Thanks 🤙
@tomboling82572 жыл бұрын
Hey Shred, Quick question / suggestion. I noticed that you're having to piece together multiple pieces of 8X11 paper when you make your templates. They make a plotter/printer that will print out your design using a continuous piece of paper. they're typically used for construction plans, but they're adaptable to just about anything. We used to use them when we were planning combat operations. Anyway, you can get them used for a decent price. They'll connect with whatever Windows/IOS system you're using. Might make life easier. Like I said, just a suggestion.
@Shrednaught2 жыл бұрын
Awesome suggestion. I’ll look into them. It’d save a fck load of hassle. Thanks mate 🤘
@Jesterchesnut3 жыл бұрын
Nice work! Did you know you can put those movies and much more shaping & board info straight onto the board with Surf Neutral? Scan your unique QR on the board and let the surfer connect with you...
@Dr.Surfer3 жыл бұрын
Hi, Man. Great shape. Can U send all parameters of the board. Thank you.
@Shrednaught3 жыл бұрын
If you fling me your email I’ll send you the template for it if you want
@salty26673 жыл бұрын
Is that a Fender Board….
@Shrednaught3 жыл бұрын
Which one mate?
@drkside533 жыл бұрын
What’s a M.O.T.E.?
@Shrednaught3 жыл бұрын
It’s an acronym for “Morning of the Earth”. It’s a popular brand of surfboards that have a very era distinct shape 🤙
@drkside533 жыл бұрын
@@Shrednaught Thanks for that, had a board shaped by David Nuuhiwa in 69-70 that was identical to the one featured here.
@Shrednaught3 жыл бұрын
@@drkside53 awesome! How did it surf?
@drkside533 жыл бұрын
@@Shrednaught really good, that outline with a round tail worked really well as a single fin (all we had back then) looking back I wish I would have kept all my boards, would have my own surf museum 😎
@Shrednaught3 жыл бұрын
@@drkside53 yeh the template definitely looks like it would be good as a single fin. Its a shame , too many boards not enough space or time.
@jimdow64702 жыл бұрын
Beautiful board. You make it look easy. I know it isn't. :(
@Shrednaught2 жыл бұрын
Thanks Jim. Yeh I edited all the swearing and stuff ups out haha
@Avevalentine3 жыл бұрын
graet job
@stevekooloos26363 жыл бұрын
Very nice… yeew
@Shrednaught3 жыл бұрын
Yew! 🤙
@mehran1343h Жыл бұрын
Ok
@mark7denzer2 жыл бұрын
Dear Shred, very simple but evolved method. Sorry, I am stealing some of your ideas. Sometimes the right tool is key (bent razor blade). You ever come by Hawaii, we have extra room and a shaping/glassing bay in the garage for our personal boards. Aloha.
@Shrednaught2 жыл бұрын
🤙🤙
@samuelhw823 жыл бұрын
I came for the board porn but stayed for the music 🤙😎
@Shrednaught3 жыл бұрын
Haha 😎
@nathanielellis79802 жыл бұрын
Hey mate what size router bit are you using for your leash plug?
@Shrednaught2 жыл бұрын
From memory I think it’s 27mm. But leash plugs do change size so best bet is to just measure the plugs you’re gunna use and get a router bit slightly larger than that.