M&R KRUZER REVIEW - Possibly the best manual t-shirt printing carousel?

[@easyprintfk4361]

Rotary as well is also expensive but can print 1000 and more shirt. It really help you a lot fast and accurate print. I love screen printing i really do than direct to film/direct to garment.

[@MRPrintingEquipment]

Love it! Thanks so much for the Love!!

[@nacerelkhadir6050]

Woaw its so beautiful t shirt design woaw i like it ❤❤ good luck

[@cjbcarr1]

Having techs assemble your press was the right call. We have two new Kruzers at work, assembled by employees and they are not where I know they should be, having used other m&r presses.

[@squeegeeandink]

Ah really - can a tech come out and fix them now?

[@AMM0beatz]

Love the tshirt design. Greetings from Portland, Oregon USA.

[@squeegeeandink]

Hey, thanks!

[@ДенисБронников-р3г]

Amazing videos. I see AMEX inks (Arsen Manukyan). Cheers from Russia.

[@ochoastyle]

This is awesome! Helps me a lot because my recent supplier just got bought out and the new supplier sells M&R.. Question, why did you guys not decide to do this wet on wet? Sorry, multiple colors is something I’m still trying to understand. Especially, the order of colors.. when to flash and when not to flash.. just things like that..

[@squeegeeandink]

Hey, for this plastisol print - it added no extra time to use the flash. We also built in a small stroke on the colours so the black can sit over well registered. I wanted to maintain the crisp lines in the black so having the flashed colours made sense so there was no indication of blurring on the edges. I would have gone for wet on wet for a waterbased design for sure.

[@ochoastyle]

@@squeegeeandink Ah ok! Thank you! 1 more question. Lol. What is the difference between the Kruzer and the Chameleon? Is it just the side claps?

[@squeegeeandink]

@@ochoastyle seems to be just the same parts just holds more screens! We haven’t needed to look into it as the Kruzer seems to do all we want

[@SPYLXER]

What’s the reason for having all the boxes on pallet tape. Why not just a line for left chest and line for full front

[@squeegeeandink]

Hey, we draw our guides directly on the platen then cover it with the transparent tape. As they are there permanently it makes the grid adaptable to line up jobs from bags to left chest and full back and make sure the reg marks are close enough to a line to check they are straight.

[@SPYLXER]

@@squeegeeandink what do you use to hold down garments if you tape off the pallet tape

[@SPYLXER]

@@squeegeeandink so your pallet tape is transparent?

[@omarikumanya2602]

I do tshirts printing in Kenya 🇰🇪 Africa how can I get that machine and what's the cost please

[@maniac9046]

Don’t worry about it. This is for the white man.

[@graficadreamartpersonaliza3436]

good morning gentlemen of the company mr. I have a small company. We work with serigraphy facades. Would you like to know if it is possible to come to Brazil?

[@LINERfeel]

Amazing

[@dubworth]

What size plattens do you have on this? 16" X 22"? Trying to find what works with the larger screens. Thanks!

[@squeegeeandink]

kzbin.info/www/bejne/bXLTZqehfMuopbs this is a good video to watch for reference - yes 16 x 22"

[@foolishsuckas]

Your off contact advice is completely wrong, off contact on a kruzer is the two handles near the middle.

[@squeegeeandink]

Hey, Thanks for the comment. There are 2 handles to set the angle and height of the off contact when you set up the press in relation to the platen. It just isn't advised to mess around with those handles once the level is set. You can use the bolt under the arm to quickly and accurately change the off contact during a print run for example if you are printing a t-shirt and then printing a hoodie. There are quite a few different models of the Kruzer in circulation which is why you might think I am completely wrong. I have seen ones with a central knob which does the same thing as me adjusting the bolt under the arm. - Cheers though for raising the point.

[@randydouglas9855]

Awesome video. Soooo much talent and experience and for some reason you are STILL pushing a squeegee like a toddler

[@squeegeeandink]

IYKYK

[@sampathkarthi8616]

Price of 10colour 10 beds

[@squeegeeandink]

Hey, you would have to ask the dealer! M&R are great though. I get my kit from Screen print world in the UK using discount code CRP5 if you want to look into that?

[@quickshirts1]

Nice video...I have the same press but have really disapointed with the clamps. They are constantly coming loose and the screen wants to move when you tighten them down making registration difficult. I've had 2 M&R automatics and a Radicure dryer and have been a big fan of their products but not so much with this one. Have you had any issues with your clamps? Thanks.

[@squeegeeandink]

Hey, I haven't seen an issue with the clamps myself. I did have to tighten one with an alan key once. Thats a shame you had that issue. There seem to be quite a few variations of Kruzer so maybe ours were slightly different.

[@bosun436]

#PRINTERSCORNER Please can show me how you setup your off-contact on the M&R Kruzer. Looking forward. Thanks

[@squeegeeandink]

Thanks for the question! see what we can do

[@marhba123..]

Peace be upon you. My name is Yu from Morocco. I work in this profession in Morocco. I am a professional in this profession.

[@marhba123..]

Mrc

[@jasonsharpbucks]

Im considering an m&r manual, how many 4 color prints can you get done per hour would you say with 2 people?

[@squeegeeandink]

Hey, I don't know exactly but if you look at odour other videos we have one which is about what we can get done in a day... that should give some good insight!

[@ambermiller6776]

I'm having a hard time getting the registration marks to match up work on it for 3 hours and still no progress. Have any tips for my problem

[@squeegeeandink]

Hey, It could be done to a few things. Are you using screens with a high tension? A saggy screen can mean its almost impossible to register?

[@squeegeeandink]

We also have a registration KZbin video! kzbin.info/www/bejne/qV61fHeOl69kg7M

[@cloviscenterville]

What size screens does it hold

[@squeegeeandink]

Hey, we typically use our 23 x 31" screens from our website for the majority of our jobs.

[@artandsign1959]

I would love to watch you print. I don’t believe it. My kruzer sucks

[@squeegeeandink]

I have lots of videos using it. There may be something not level on your press causing you grief?

[@theonlydubbace8279]

IG brought me here

[@squeegeeandink]

Cool! thanks for watching!

[@graficadreamartpersonaliza3436]

BOA NOITE TOP SEU TRABALHO,GOSTARIA MUITO DE ADQUERIR UM CARROSSEL DESSA AQUE NO BRASIL NA MINHA LOJA TRABALHAMOS COM BERÇO DE PAREDE

[@squeegeeandink]

Ei, isso se chama Kruzer e é feito pela M&R, obrigado por assistir