M-vave Chocolate switcher w/ M-Vave MS-1 adapter to control Zoom MS50G MultiStomp

[@siriurameshi5790]

it's look like the better way to go than Mooer Prime p1. thank you a lot for sharing

[@johnnyatomic1]

Never tried a Prime P1

[@siriurameshi5790]

i did the set up like this , but not work what 's it your power bank and spec that you use in this video plz let know , thank you : )

[@GreatKukuruzo]

Hi, thanks for the video. Could you please make a detailed tutorial on how you've configured MS-1 and Chocolate in the smartphone app so it could work with Zoom?

[@junmorelo6436]

hello sir... im having an issue on my zoom MS7CDR m-vave chocolate bt wireless midi controller set up the bluetooth connecting and all are properly configured but not working on slave device any advice on this?

[@BrownAroundTown]

Hey gigging musicians! Just to save you the trouble, if you happen to buy the Zoom MS-50G+, you won't be able to connect wireless MIDI to operate the M-Vave Chocolate 4-switch external foot controller . When Zoom added the (+) to the MS-50G, they should have added a (-) also. Now...on to other things.

[@TheLordcasio]

What MIDI channel does the MS50G respond to? Doing something similar with the MS70CDR and the Chocolate. Nice use of the Bongo Tie btw.

[@johnnyatomic1]

both MS50 and MS70 should be the same. The new plus versions don’t have same midi and can’t be used with the chocolate

[@evilasiosergionascimentode417]

Massa! Porém seria melhor fazer um vídeo fazendo a configuração. Eu tenho o Ms50g e não consigo fazer funcionar. Pode fazer um vídeo configurando? Fico no aguardo.

[@wakenwaken3618]

Can we set chocolate switch to be able to tap tempo and use remaining 3 switch to enable presets ? Thx

[@johnnyatomic1]

Setup one directional Sysex language during MS1 setup in CubeSuite software. If you don’t do this sometimes it it work correctly, sometimes it won’t.

[@danielforto]

It's not working on my end. I already set MIDI B port as host and also updated it. Could you please help me narrow down?

[@johnnyatomic1]

Sorry, I don't know other than try different sysex language setting during setup.

[@mahendra_chanel]

So you do not need AA type battery inside zoom?? Is it enough current supply from 5v output powerbank to supply zoom sir?

[@johnnyatomic1]

It will work without battery. But is it enough current to maintain that way of using it? I don't know.

[@invalid4381]

Is the volume between two patches is same when we change patch?

[@johnnyatomic1]

It would be if you use a patch with distortion/overdrive/EQ. All my patches are only delay, reverb, & tremolo. So no level problems.

[@invalid4381]

@@johnnyatomic1 eq or any filter

[@pstrokeslibsarctic]

This is convenient

[@rayraypornias6287]

I tried it didn't work on my zoom ms50g

[@johnnyatomic1]

It took a couple tries to get the setup correct.