M1102 Hummvee Overland Trailer

[@competitiveedgeathletics2407]

What an awesome build! Just came across this and you did a fantastic job!

[@jonnynoll1153]

Thank you.

[@rscow]

That Leitner rack is the same one I have on my Ram 3500. And I was wondering if I could put it on the M1102 I just bought. What a coincidence...and it answered a big question I had about whether I could use the rack on the trailer. Like you did! What a great find, your video. Thanks.

[@davidisinmn]

Did you try it yet? I’m curious exactly which rack they have a ton on their website. This guy barely replies 😢

[@rscow]

@@davidisinmn yep. I got the rack adapted to the trailer. I’ve taken it on two short trips and it has all hung together. There were some non destructive mods. And I had to source longer cross pieces. Dang trailer is wide.

[@jasonadkins1131]

Awesome setup! One of the best M1102 setups I have seen.

[@zodar1400]

Nicest setup I have seen in a long time.

[@jeff41768]

Excellent job! Very impressed

[@sammiskie1127]

Nice trailer. I did the electric brake conversion on mine. I put a S-250 military in the bed of mine.

[@sonnylee69]

Nice set up. Thanks for sharing.

[@tonyincs]

That is a great base station setup!

[@judelujan6243]

Hello, your trailer looks great. I have one and would love to modify and extend the hitch. Anyway you could do a video on what you did to accomplish that mod?

[@colbybullock1068]

I was about to ask the same thing

[@TerrenceLCarpenter]

I see that unity flame .👍

[@colbybullock1068]

Can you make a video on how you modified the hitch from stock to what you have it now! I have a GX460 which has a swing out rear door and would love the mod plans you did

[@OrganicsteamcleanCo]

Wow that's freaking awesome bro!

[@OrganicsteamcleanCo]

Can u add links where u inquire all the accessories please. Thx.

[@adventureoutline]

Sick trailer man for sure one of the best ones I have seen 👍

[@richardthompson6406]

Very nice rig

[@duhamelschwantz4167]

Nice Hitch Setup! Did you weld the hitch receiver extender bar to the existing bar after cutting off the Lunette ring? What size bar is used for the stock Lunette ring on the M1102?

[@TroysHobbies]

Sweet setup!.

[@texasfirefighting]

That is an awesome mil trailer! I have an M410 with a rooftop tent, 12 gallon water tank and pump with lines that can discharge from the front and the rear of the trailer, LED lights on all four sides and I’m still trying to figure out what I can add to it next! Gotta ask... what is the exact name of that gray? I’d love that color!

[@rickpetersen21]

Agree with ROAR, what color is that? Looks great, nice work.

[@DigitalFMJ]

Great can job!!!!

[@morgansaunders4501]

I could be blind but do u have a video on ur ram. That is a slick rig. Would love a walk around or videos of it on the trail

[@KeithGlawson]

Love your trailer. Could you tell me which model and size AEV wheels you used an if any modifications were required? Thank you

[@edgar5850]

Hey, I just bought one. I’m taking a few inspirational ideas from your rig. Looks great btw, one question. Do you have the total depths from top to bottom on the inside bed of the trailer?

[@texlee84]

Well done! I like how you incorporated the storage pods from the Leitner rack to house all of your controls and systems, pretty nifty. Do you ever carry a RTT on the trailer as well?

[@joelr.7218]

So many questions, I just bought one, and Im learning some obstacles with registering it. What are the wheels you went with?

[@StevenPenny]

I love that blueish color on the trailer, is that something custom or do you have a name? I want to get a m1102, I have a humvee so it would be the best accessory for me.

[@shankthomas]

What did you use to attach the rack to the trailer? Did Leitner give you any grief about ordering the extended cross bars? What rack exactly did you order that fit it? Were there any extra fabrication steps that you had to take to make it work?

[@jonnynoll1153]

Its bolted to the rails. I was the first to talk Leitner into sending me 7' bars that I could cut to my specs. But they won't do it anymore so people are using 80/20 or other crossbar material.

[@brokenrockadventures]

I just ordered 3 of the longest bars they make. 84 inches, paid 100 each for them, non powdercoated. Will be here in 3 days.

[@kellogg2185]

Hey could you possibly do a slightly more in-depth video of the way you mounted that rack? I just bought a 2008 M1101 and am wanting to put the ACS Forged rack on it. A better idea of how/where you mounted it would be super helpful.

[@jonnynoll1153]

Text me. [phone]

[@brokenrockadventures]

​@jonnynoll1153 I know this is years old, but same question. How to secure to the rails since nothing to clamp onto. I have an 09 m1102

[@TheGreekbull]

On your trailer what did you do to convert the lug for the non military wheels?

[@jonnynoll1153]

Nothing. They are standard 8x6.5 hubs on these.

[@jdpst20]

Where in Colorado are you? I'm looking to get into something like this and slowly build it up to tow with my Land Rover. Do you have any more links for info such as wheels you put on there, and other build materials? I'm in Colorado Springs and would love to check this out in person if you are close by!

[@jonnynoll1153]

Colorado Springs. My cell is [phone].

[@michaelpartin2684]

I like your build! I also want to replace the military wheels and tires. How do I order the correct size/lug nut pattern? I want to go with 17 in wheels and 35's to match my Bronco better. Thanks

[@jeffhunter4341]

Same question here!

[@davidisinmn]

Anyone ever figure this out ?

[@michaelramirez6749]

Great build, where did you get the side boxes for the trailer?

[@lesliefry9302]

how many lugs were on the military hub. wheel, how did you go about finding the right rim, Im looking at geting one, 17 alunimum rims, and not so tall tires, maby a skinie 35, they a rusposed to weigh 1500 with the military tires how much did you get the weight down ??? byu ading the different rims and tires, I want to pull mine with a jeepj any advice ??

[@colemangolf1]

Nice set up! I'm buying one as well. Question?...What wiring did you use to convert to work with your 12v truck?

[@Carlos-rz4wv]

That's looks bad ass, How did you set up the electrical box in the trailer to power everything up?

[@jeffhunter4341]

Awesome trailer! With the addition of the 80/20 7' bars, do you think it would be strong enough for a rooftop tent if I used four?

[@evankenville4332]

I had a custom rack fabricated that aligned with the canopy holes, 2" steel tubing. Holds a big roof top tent with my son and I which makes up a heavy load no problem :)

[@JohnHansknecht]

When you took off the big military wheels, is there a market for them? Humvee owners or something? Wondering if this can offset the cost of switching over to regular wheels and what is involved.

[@jonnynoll1153]

I got a couple hundred bucks for them. But they didn't sell fast. They're heavy AF.

[@davidisinmn]

How did you mount the rack to the sides ?

[@calebzarzour111]

Jonny, I've a m105. Would love to do a similar build. I'm over in Durango. Are you near?

[@edgar5850]

Can you tell me where you bought trailer extender?

[@mikea4074]

What are the inside dimensions of the box? And between the wheel wells?

[@dieselboy9996]

Cool set up. I'm thinking about doing one. Have you used it much? Anything you would've done differently?

[@jonnynoll1153]

Use it a lot! Going to a smaller water tank on the left fender to regain the full bed length. Otherwise it's been perfect!

[@scottchapman2394]

What was the registration process like in Colorado? I need to do something similar.

[@evankenville4332]

in Arizona I had to register mine as a custom/home built

[@chasejiannalone8763]

What is the internal bed length on those 1102 Trailers? Is it long enough for a full size Moto? 84" or better?

[@jonnynoll1153]

85". Perfect for moto!

[@MotoringAdventures_KE7SAI]

Beautiful! I love it! Is that leitner rack specific to your ram or could I use any of them? And how did you mount it to the bed of the trailer?

[@kjsplaylist]

Who makes those boxes on the sides of the trailer?

[@josiahpeden340]

Leitner designs

[@ssazerac]

Do you have any trouble with the hubs overheating? Mine tends to run very warm if I do hwy speeds.

[@jonnynoll1153]

Never. And it's been cross country a couple times now. But I serviced the hubs right away and didn't over-torque the spindle nits like the Army instructed us to do back in the day.

[@brandtvanausdal2520]

Do you mind sharing the actual Rustoleum color? Is it smoke gray?

[@joshuahgardner3955]

where did you get the water tank

[@jonnynoll1153]

Amazon

[@garretthackett4313]

How often do you use the trailer?

[@jonnynoll1153]

Not as much for camping any more since we bought a van. But still nice to haul kayaks or multiple dirt bikes/Mt.bikes with it. I may sell it though.

[@adventureswithcoffee]

@@jonnynoll1153 Hi there - are you interested in selling the trailer, or did you already?

[@josiahpeden340]

Leitner designs boxes

[@ProjectAnubisUSA]

Seem crazy expensive too 😂

[@Dogman82556]

Nice build. But damn get a hot tent and portable stove. Glamping doesn’t build character or make people tougher. This whole going into the “backcountry” and needing all these comforts seems lame. Technology brings all the soft ones to the beautiful places lately. If you can’t be a little cold in the wilderness then get a hotel and leave it for folks that actually want to be there.

[@ProjectAnubisUSA]

Just a heads up KZbin is monetizing your channel and making money off of it. you don’t have enough watch hours nor subscribers but ads keep playing under the new KZbin policy they have the right to make money on it until your able to monetize.

[@jonnynoll1153]

I wish I knew how to do that.

[@606budwheel]

when i go camping 2 words pop into mind, Holiday-Inn, shame on the mess. Soldier`s get deployed, not awnings

[@Slatari]

Soooooo much $$$$$$