M12 Fuel Gen2 Hammer Drill vs 4”Holesaw.

[@joshuaking5519]

Your hole saw is duller than a dome light on an 1972 Buick.

[@nickcounseller3952]

I Drill 4” holes easily with that drill. Pushing way too hard. Probably use a bigger battery too

[@DaileyWoodworks]

@@nickcounseller3952 in drywall maybe, but this was a cabinet panel. I got a little more oomph out of the 4am. But my M18 version wouldn’t have stalled. I really wasn’t pushing hard. I still love all my m12 tools. I had an opportunity to test it doing what I normally use an 18 or a hole hawg for.

[@carterhutcheson8081]

Used the same gen 2 m12 drill with a 5.0 HO battery yesterday on some LVL with a 4” hole saw. Took a minute but it went through it just fine. Take your time. It works just fine lol

[@NextMRV]

I’ve used mine with a 1 1/4 self feed demo auger bit and it will drill through 3 stacked 2x6

[@retiredcryptohunter9031]

Don't use a dull hole saw

[@whitesnxw]

My flex angled grinder with any battery can do almost any size hole if even used a drill bit of 1 inch through 2 * 2x4 s

[@JoelAmador-p8h]

Let the tool do the work, your cocking it all to one side

[@alexanderlangdon92]

I have the same drill and I’ve beat the hell out of its great lightweight drill but it is only a small guy. Definitely need a bigger battery for more torque out of it. I only use that sized battery for my lights or impact gun while doing hand tight fasteners.

[@Valerie_trans]

depending on what wood it is this should be done with a braise or even a press not an electric drill like that

[@daltonmaddox6404]

no way almost like he started by saying i know i shouldnt do this😮😮😮 GEE GOLY WHO WOULDA GUESSED, yall get more retarted as the days go by

[@godzela80]

When you hold a drill like this , you chock it from getting air to cool the motor and can really go bad , rockie

[@rflatt16]

Who’s rockie?

[@justauser]

You gotta use a bigger battery. The 5.0 or 4.0 would be the best choice

[@michaelbennett132]

That hole saw is blunt af thats why

[@rjc9000]

Looked like you were putting all your weight on it. Probably would work a little better if you eased the whole saw in. My 12v cuts just fine with a holesaw as long as its sharp and i dont lean on it.

[@JoelAmador-p8h]

Use the bigger battery it will do it. I’m surprised I’d never use an m12 for that but m18 all day

[@danielrosic2960]

I love the m12 line but they’re damn weak, at least for my line of work.

[@jasonmaxwell7134]

You’re not supposed to use an hammer drill or impact. A regular drill would be the correct tool!

[@shock_odyssey9632]

Maybe not wood but drywall easy brother

[@Wrenchin]

Absolutely false I’ve done 3 1/2 through a piece of quarter inch steel lol and my drill is at least four years old same model

[@MikkaJo]

Abuse of a great tool 😒