M278/M157 low boost/ slow response issues solved!

  Рет қаралды 10,351

Brian@RED

Brian@RED

Жыл бұрын

If you can having delayed boost or issues when pressing your brake pedal; is may be your issue.

Пікірлер: 36
@RosSauce85
@RosSauce85 14 күн бұрын
Great video! I changed out the valve and didn't realize a lot of the ticking noises I had were because of this part. My original one was still intact but must have been leaking.
@slowbee236_
@slowbee236_ 5 ай бұрын
Now I have ordered the valve and the elbow. I will change both. Thanks a lot
@Diamondo25
@Diamondo25 Жыл бұрын
This is great! Such a simple component that just break because of the age of the engine. Expect worse on the new engines, so much plastic... Great video, even though I run a M112 it was yet another thing to keep track of!
@Hi.Al.
@Hi.Al. 4 ай бұрын
For anyone doing this job: the hose needs to be heated before pulling ! Also the guys solenoid is toast , if the cap is dirty dark yellow like the one in the video then it needs replacement.
@Sayless13
@Sayless13 4 ай бұрын
Hey man appreciate the video. I think this is a problem in my 2014 E550 W212 M278 I really wasn't paying it any mind now I see it's an easy fix. Thanks also for putting the part number out.
@TunedMercedes
@TunedMercedes Жыл бұрын
awesome video man
@Mike-vz5io
@Mike-vz5io Жыл бұрын
Good stuff thanks I’m a check mine tomorrow.
@andyjili876
@andyjili876 Жыл бұрын
it helps a lot in the finture, e63 touring in Germany
@mikimiki195
@mikimiki195 Жыл бұрын
Great video thanks dude 👍🏻
@chevota400
@chevota400 Жыл бұрын
Most of those replacements have a cheapo rubber valve inside. It basically seems that if the valve is black, it's the cheapo one. Not sure how long they last, but my issue was sealing. They don't seal well because the valve is not very flexible and it's flat. The surface it seals against is not flat, it's convex. In order for the stiff flat one to seal it needs to have enough delta pressure and flow to force it to seal. That reduces the vacuum your turbo sees. The good ones, like the oem orange one, are a much thinner, wider and softer, plus they're shaped to match the sealing surface. In short, they seal right away, no delta pressure needed so you net more vacuum. Does the cheap one work well enough? Maybe. Most people who have this engine bought it for the power, and that valve is very important for power. You can disconnect the vacuum line to see how much power you lose with no vacuum, which is almost half. So just an fyi, if netting the peak power is important, don't use the cheapo black chinese crap. Also, many of the ads on ebay that show the good orange valve in the ad, are actually the black one and they'll hope you won't notice. Ask me how I know... Classic ebay scam, so be wary.
@yoyo1233d
@yoyo1233d Жыл бұрын
Have you seen the orange valve only for sale on amazon by chance from piedman? Is it possible to replace just the valve within the existing housing?
@chevota400
@chevota400 Жыл бұрын
@@yoyo1233d I don't know what that is. Link please. Yes, you can replace just the little rubber disc, which is all that needs replacing anyway.
@stoic5505
@stoic5505 Жыл бұрын
I’ve got a question not regarding this issue, but by any chance would you be willing to make any more of those intakes??
@GlitchedVR68
@GlitchedVR68 9 ай бұрын
Good video, did you flush the oil in the hose? I check mines today and it’s missing the whole orange disc in its entirety. As soon as I pulled the hose oil leaked from it 😢
@smooth245
@smooth245 Жыл бұрын
About to perform this replacement today. Hopefully it solves my issue. M278
@gvainola
@gvainola Жыл бұрын
did it solve the issue?
@smooth245
@smooth245 Жыл бұрын
@@gvainola yes it did
@vdgggame
@vdgggame Жыл бұрын
What was the issue?
@GreekMilitaryAnalysis
@GreekMilitaryAnalysis Жыл бұрын
Hi.. great video. Do i need to by two or one? I have E63s w212 M157
@jf4842
@jf4842 Жыл бұрын
@brian@red can we have Mercedes part numbers for both please.
@johnblack6340
@johnblack6340 Жыл бұрын
Can you tell me which one can fit a 2014 CLS Mercedes-Benz
@GermanMech
@GermanMech Жыл бұрын
I have a 2015 GL550 and my wastegate arm does this on startup for about 5 seconds then stops and also does this when brake applied. I have check engine light for Low boost pressure on turbo 1. Can the check valve be the culprit?
@amg_papi63papi30
@amg_papi63papi30 6 ай бұрын
was curious since its been a year you commented this, how did you resolve that issue I have the same check engine light for low boost pressure on turbo 1 on my gle 63
@MRONE254
@MRONE254 3 ай бұрын
​@@amg_papi63papi30same here. Any luck?
@JosePerez-vl3xf
@JosePerez-vl3xf 5 ай бұрын
How do you installed the blow off valve?
@mrapter7
@mrapter7 4 ай бұрын
What’s that large piece on top of the engine? Looks like a catch can? Something?
@CarlosZepeda-jm4io
@CarlosZepeda-jm4io 3 ай бұрын
Blow off valve
@herlikocibelli6764
@herlikocibelli6764 Жыл бұрын
I think your pump is not working well or vacuum line is blocked with oil or turbo wastegate actuator is filled with oil, your wastegate actuator moves very slow, I had the same problem as but but i replaced vacuum pump and the response is way faster than yours
@NeverRideSlowly
@NeverRideSlowly Ай бұрын
Mine was super oily when I took it out, wondering whether this is normal.
@armandochu6676
@armandochu6676 Жыл бұрын
will this show with a smoke leak test?
@Dying_Breed.300
@Dying_Breed.300 Жыл бұрын
What do you mean boost issues with my car some times it seems I have more power then other times . When I first drive it in the morning then it fads later in the day
@the_lgnd_stargaming9205
@the_lgnd_stargaming9205 Жыл бұрын
I have the same issue rn man, were you able to fix the problem? If so can you let me know what you did to fix it
@EvolutionEnthusiast
@EvolutionEnthusiast Күн бұрын
How did you install that HKS blow of valve?
@brianRED
@brianRED Күн бұрын
I had modified an inline coupler of the original intercooler pipe. I no longer own this vehicle.
@beckbenz9707
@beckbenz9707 Жыл бұрын
Can i get part number?
@brianRED
@brianRED Жыл бұрын
www.ebay.com/itm/175278374877?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=SS77AVnpSay&sssrc=2349624&ssuid=CpH65x2eR1e&var=&widget_ver=artemis&media=COPY
Китайка и Пчелка 4 серия😂😆
00:19
KITAYKA
Рет қаралды 3,8 МЛН
Универ. 10 лет спустя - ВСЕ СЕРИИ ПОДРЯД
9:04:59
Комедии 2023
Рет қаралды 2,3 МЛН
A pack of chips with a surprise 🤣😍❤️ #demariki
00:14
Demariki
Рет қаралды 45 МЛН
M157.982 engine check up
25:53
Tasos Moschatos
Рет қаралды 1 М.
E Class m278/m157 intake tube modification under $30
6:48
Brian@RED
Рет қаралды 21 М.
Mercedes M278 M157 Tuning: Copying MBT to Base Timing and Wastegate Control Using HP tuners
6:35
M157 turbochargers (part 1)
4:29
Tasos Moschatos
Рет қаралды 3,2 М.
$10 Turbo Boost Quick Fix For M278 / M157 #cls550 #cls63 #e550 #e63 #amg
3:50
Mercenary Motorsports
Рет қаралды 3 М.
MAJOR Common Issues On The CLS 550 Its REALLY BAD 😳
16:04
Redline Racing Garage
Рет қаралды 74 М.
M157 M278 turbo cooling lines - Mercedes Benz AMG
7:05
Eurochareged Boston
Рет қаралды 9 М.
M157 & M278 Common Issues, Things to Check Before Purchase
11:15
TunedMercedes - Mercedes Tuner
Рет қаралды 51 М.
M157/M278 timing chain
17:29
Tasos Moschatos
Рет қаралды 25 М.
МАСТЕР ПАРКОВКИ
0:22
В ТРЕНДЕ
Рет қаралды 3,9 МЛН
Butt-Friendly Bicycle Saddle
0:14
Tech Moments
Рет қаралды 12 МЛН
Британский гонщик быстрее Гугл мапс 💨
0:48
ТАМАЕВ vs ВЕНГАЛБИ. ФИНАЛЬНАЯ ГОНКА! BMW M5 против CLS
47:36