Mabett Raptor Style Fog/Driving Lights installation & Tips

Mabett’s new Raptor style, bronco fog / driving lights kit for 2021-23 Bronco’s with the modular front bumper can be purchased here: www.amazon.com/dp/B0BYNDJK3N?...
www.amazon.com/stores/page/D0...

[@dauph6252]

The Tip about the TP40 was very helpful

[@tomfillmore9710]

Good job looks very nice enjoyed watching take care

[@7863348]

Have a great weekend Tom.

[@mischef18]

They sit in there nice bro and hi Kathy. Safe travels

[@7863348]

Thank you. Have a great day!

[@riderflyer]

Great instruction video...been looking for smaller fog lights for the Bronco and think these will work fine. One question; what type connectors do you use for attaching light wiring harness wires to aux switch wires? Thanks for the video and looking forward to more.

[@7863348]

Hooking anything up to the Aux wires I always solder them and seal with waterproof heat shrink. Doing it that way makes a factory looking join with no chance of corrosion and a great waterproof connection.

[@m9ovich785]

Thanks Paul / Kathy. Sorry for the Late Post. I am really behind on Videos from most of the ones I've subscribed to . Is your Lift out of level ?? Your Bronco was sitting driver side lower that the Right side ? Mike M.

[@ritchiemunn]

Great video. Considering these lights. Just want to confirm they are LED and if you are pleased with the light output? I like the dual beam as we get a fair bit of fog in Saint John NB.

[@7863348]

They look,like they came with the vehicle. They work great. As for their output they aren’t going to be as bright as others lights like the square 4” LED’s I had there before but there is a noticeable difference when they are turned on. One switch for whites and the other for the ambers and it’s the perfect set up (for me at least). Good luck.

[@cowboy4422]

Excellent video, I have the auxiliary switches in my bronco as well. What happens if I forget to turn the white lights off before I turn the amber lights on and I have both switches in the on position? Will that mess everything up?

[@7863348]

Nothing will happen if you have both on at the same time other than using more amps because they are both on. Thanks for watching. They are great lights.

[@michaelbradley8508]

Great video. Thank you. I’m thinking about buying my wife a Bronco. Can you tell me which model you chose and why

[@7863348]

Michael I decided on a Outer Banks with a 2.7 twin turbo. 4 door and every available option except the sway bar disconnect. I didn’t need the sway bar disconnect because that’s used for rock crawling and ours won’t be rock crawling. I went with the Outer Banks because it’s considered the luxury model of the bronco. It has the interior I liked the best, colour matching mirrors, painted grill. All the models in these Broncos start off the same but it’s the equipment you add is when the model name changes so I have a full equipped luxuryBronco with the Sasquatch package and everything that it could have. That’s how and why I chose mine. Thanks for watching.

[@callsign.iceman7913]

Could you do a follow-up video for how these lights throw off their light in the dark?

[@7863348]

I will. Good suggestion 👍

[@user-vv6jx7tj8t]

I'm going to order these right away! Could you tell me what brand that bumper light bar is?

[@7863348]

Here is the link BUT I had to fabricate custom mounts to get it to fit the modular bumper. www.amazon.ca/gp/product/B09DFKR3K8/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

[@bobudovich5613]

Good job, do you guys still have the gold wing ? Still ride ?

[@7863348]

Thanks. Yes still got the GoldWings. We only got the Mustang out yesterday so the GoldWings will be next. We’ve been busy plus we have short riding season here. Ride safe.

[@stevensieja9392]

IF I want to run only Amber is there a way to hook only amber up? I don't want to occupy an aux switch for the white lights. I only want the lights to illuminate amber. Thanks for the vid big help.

[@7863348]

Yes. Just run the yellow wire to 12 volt and black wire to ground or go to the Aux switch you want to use. Leave the red wire alone and don’t connect it to anything. Your welcome.

[@TzviP]

I have a Big bend Sas without Aux. I had OE fogs and switched to a Mod bumper. Will it be plug and play? I have the fog option button on the bottom left of the steering wheel. Thanks!

[@7863348]

No. These lights have two modes. One mode is all white, the other is all amber. I have the aux switches but also the 6 Auxbeam gang switches. The like the Auxbeam the best, easy to hook up and a very neat install. That’s how I would do it.

[@ukulele_cheri]

Any update on your experience running these? We also installed them about 7 months ago and now have a problem with a failure in one light assembly.

[@7863348]

No issues here. I keep the driving lights full time and only use the ambers when needed. Got to Mabett on Facebook, ask Ryan if he can help with your issue. Good people to deal with.

[@jakeschisler7525]

So you said red wire goes to one switch and yellow wire goes to another switch, could both switches be turned on the same time or could there be a problem? Just curious

[@7863348]

Yes I said that but I also said to use only one at a time. Having two on will create double the heat and yes double the energy while producing no difference in lumen’s

[@callsign.iceman7913]

Love your videos so keep ‘em comin’!

[@ukulele_cheri]

Are these street legal or off road only?

[@7863348]

You’d need to check your regional laws. Up here in Canada there’s no issues with them but I do have them aimed down. One needs to be responsible for their equipment.