Mac Tools R.B.R.T. Extractor Sockets With Demo Of Them Being Put To The Test!

Mac Tools RBRT Extractor Sockets Put To The Test! Demo On Some Stripped Bolts and How They Work To Remove Them.
Thanks for watching ! I truly appreciate each and every view we get on our videos. Your support and comments are truly amazing. You guys that are subscribed, are awesome, thanks for giving us your time to watch the videos.
If you aren’t subscribed to my channel, please subscribe, it doesn’t cost you a single dime !
Follow me on Instagram: KoonTrucking and Diesel Medic we always post interest and funny content plus some cool pics we take of jobs and new tools. TikTok: Koon Trucking
If you are interested in Koon Trucking or Diesel Medic shirts or stickers teespring.com/...
Here are some of my favorite links to get some awesome tools and coupon and discount codes to save you some money.
Be sure to check them out (just clicking my link and getting to Amazon helps to support the channel. Even if you don’t buy the item listed, just using my link and then choosing another item will help)
For some of my favorite tools click the link here: www.amazon.com...
Bolster Bolt Organizer 10% Off use KoonTruck10 boltster.com/?...
That code will even work on Amazon amzn.to/3fV9TKI
www.gripty.com code KOON10 for 10% off
www.motivxtools.com use code KOON for 10% off entire order
Olsa Tools: Use the code KOON to save 10% off your purchases rebrand.ly/KOON
OTR Performance a cheap and effective way to clear codes and force a regen. Use this link and reference code: CKoon to save 5% off
otrperformance... this is a owner ops dream!
Rinse Kit rinsekit.com/?...
Check out www.vampiretools.com and use the code KOON15 and save 15% off your entire purchase plus free shipping in the Cont. US
LunchEaze luncheaze.com/... $5 off purchase
Type E Marking Paste type-e-marking...
Tribus Tools: bit.ly/2MalUQ0 use code: koontrucking save 5% plus free shipping
Wera Screwdrivers and other awesome German Tools: www.kctoolco.c...
Capri Tools Work Light: 620 Lumens of awesome: www.amazon.com...
Tekton 1/4” socket set www.amazon.com...
Grey Pneumatic Duo-Socket Set Metric Master Set. This is an awesome set can be used on a ratchet or impact!! www.amazon.com...
Lang Tools Master Feeler Gauges:
www.amazon.com...
Gearwrench Bolt Biter Set 👍🏻 www.amazon.com...
OEM Tools Magnetic Rechargeable Light (the battery life is amazing on this light, super bright. My favorite magnetic light)
www.amazon.com...
Knipex Cobra Pliers (some of my go to Pliers):
www.amazon.com...
Streamlight Stylus Pro Rechargeable Flashlight:
www.amazon.com...
I use Tub O Towels to keep all my tools looking nice and clean. Here is the link to them:
www.amazon.com...
Gearwrench Brake Reset Tools (Drum Brakes): www.amazon.com...
Email: [e-mail]
Koon Trucking
200 Davidson Dr.
Booneville MS 38829
Follow our Diesel Medic channel / @dieselmedic5673

[@traviskellogg66]

Takes a lot of balls for a salesman to agree to that. He was willing to put his tools to the test and he failed but even though his tool failed, it saved a lot in replacement parts vs the one failure

[@johnpiper5815]

A good salesman can sell anything but a great salesman can admit when their product doesn’t get the job done regardless glad to see they don’t just show the positive but show that sometimes the product doesn’t get the job done for whatever reason

[@LynxStarAuto]

What these sockets can benefit from is an extension to assist with hammering. I'm not talking about a regular 3/8 extension in the square drive either. But an extension that also slips around the entire socket, and has a nice dished end to protect your hand while you hammer it.

[@djosbun]

Dan is an excellent salesman. He communicates clearly and is confident in his product. Also seems like a great guy. Knowing that these sockets can be used in both directions, they're going to sell many, many sets of these.

[@terryjohnson3825]

looks like an awesome product too bad their website sucks and you cant locate a dealer i wont buy online if im gonna pay tool truck prices i want to be able to walk on the truck for warranty/ returns etc /be able to touch and feel the products before purchasing

[@azdragoon72]

B.S, he says "bad boy" way too many times.

[@dstblj5222]

Just by them in proto colors

[@jackhenry290]

Brave taking on unknown challenges. Great video

[@ecleveland1]

There is always the right tool for the job. Sometimes that tool is an RBRT extractor and sometimes it's the cutting torch, other times it's the compactor at the salvage yard. That bolt in the tensioner is ready for the compactor at the salvage yard.

[@jimmywarledo4930]

I had the feeling he was gonna toss that socket across the room when he couldn't break that nut loose, but I'm sold

[@rockyjones4707]

Great video, with the way y’all set Dan up he was under more pressure than the salesman on Second hand lion. Lol. Loved it. I have the broken bolt removers with FOR and they are awesome.

[@BBAuto007]

Asks for a bigger hammer... proceeds to choke up on the handle 🤦🏻‍♂️ Great videos though Clay and Dan... only product reviews I trust to watch 👍🏼 I’m definitely sold on the RBRT line 💯

[@KoonTrucking]

Some big news is coming Tuesday that will be here on my channel...... be sure you watch it !

[@corykobelski4215]

No fingers were smashed in the making of this video 😎

[@PhillipDrumz]

Nice work Dan!

[@mid.nightrunners8157]

Dude is so into his job, love the energy 👏

[@bradygrady7787]

i guess im asking randomly but does anybody know of a trick to get back into an Instagram account?? I was dumb lost the password. I would love any assistance you can give me.

[@mauriciowatson9624]

@Brady Grady Instablaster :)

[@bradygrady7787]

@Mauricio Watson Thanks so much for your reply. I found the site thru google and I'm waiting for the hacking stuff now. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.

[@bradygrady7787]

@Mauricio Watson it did the trick and I actually got access to my account again. I'm so happy! Thank you so much you saved my ass!

[@mauriciowatson9624]

@Brady Grady glad I could help :)

[@johngraham8052]

Will probably pick-up a set of these. Good salesman.

[@diegorubio1073]

One of the younger techs broke a caliper bracket bolt this week and i saved his bacon with my set

[@bluefj-wc3vz]

I was getting ready to comment on the unreal world demo block testing, them you pulled through with pile of junk tests. 👍

[@fandango_buttlicks]

Snap on cordless impact for the win

[@doylee469]

Dan seems like a good sport. Those sockets are amazing!

[@hulkmadddhernandez6113]

I could feel your heart drop when he dropped your ratchet 😂

[@KoonTrucking]

Haha

[@walkernottexasranger7565]

I wonder if an impact driver would have given that extra bite it needed. Sounds like a sweet combo am I right ;)

[@ytTaz480]

17:10 This is when you just bust out the die grinder with a cut off wheel and carefully make new sides and turn it into a smaller, NEW, head.

[@steveharvey1876]

Good video! My foreign object removal tool is a punch and a hammer. Cheers!

[@syclone73]

try using the r.b.r.t. with a 3/8 air hammer bit matco FR438 or mac tools ah5538 to hammer on while turning with a wrench on the serpentine pulley bolt. also some of those have left hand thread on the bolt.

[@Invisible_Poop]

My methods are in this order; Heat Induction Bolt Buster on Nut or Bolt, Bolt Extractors Sockets, Weld a same size Nut onto it and it worked every time!

[@JavierHernandez-ih5zr]

Or if the head of the bolt breaks, weld a washer to the broken bolt and then weld a nut to the washer. Saved my butt

[@kdao1007]

Great Challenge for the Mac Tools Dan. WELL DONE

[@MrSupernova111]

Looks awesome!

[@sebastiang9435]

Im pretty impressed with these sockets. Very nice video

[@twalters51]

Some "deep well" versions of those would be nice especially in the tie rod situation there at the end and on that v belt pulley to clear the housing around it.

[@akovic100]

I bought the Matco hex grip impact socket when they were on promo a couple of months ago. I'm satisfied with them. But if I had some extra $$$ to burn, I would consider picking up a set of the RBRT to compliment my Matco set.

[@lanlantheman]

I know we all have tools that we have modified over the years. I was watching Bill’s box tour and noticed some stuff. Can you do a video on tools that you have modified over the years? I know it’s not a tool manufacturer video but I think that the modified ones are just as important and deserves a video of their own. I’m new to your channel, my wife is already giving me crap for watching your channel 😂. I have to wait till she goes to sleep to watch 😂. Always asking “What do you need that for?!” Lol. Love your videos. Keep up the good work Sir.

[@KoonTrucking]

Did it two years ago. Here’s the link kzbin.info/www/bejne/gqaQq2yuqsyShrs

[@lanlantheman]

Thank you Sir

[@scubastevesdestiny]

I am 100% confident that a traditional twist extractor socket would have removed the one they could not get.

[@gabehorn5079]

They could a lined the 12 up with the ridges they made

[@chriswebb3018]

This shows that even though the rbrt sockets are great that you should still have different styles of extractor sockets/ tools. Sometimes rbrt works great other times you need turbo sockets, Gearwrench ones, astro flank bite. Because there are other factors like the size of the socket for clearance, some are really fat and durable like rbrt and others are thin like the turbo sockets. Also ive used a file to square up a bolt that's been stripped really bad so the extractor can bite better.

[@gregcothrum4045]

Great video y'all have a great day and stay safe 👍

[@haroldpatton01]

They do a Great job! Not every bolt and nut you can get

[@slayer515O]

He'll yeah I want one🎉

[@biggink7979]

Keep up the awesome videos can’t wait to see what’s next

[@henryg683]

looks like they could use a deep socket too!!!

[@Adams_Grage]

Hell yesss! Damn I love this channel

[@huskypuppieshp3126]

I’m buying them right now

[@ericracette9716]

They have a great product there i do believe they need to add some in between sizes and also to make a deep version as we saw the bottom out when the stud is long almost perfect but not quite there oh and one more thing they need to be a little thinner.

[@johnn2557]

You guys made Dan sweat it out, give him a cold beer! Nice demonstration!

[@craigspeirs9115]

I wish mac tools would start making tools in USA, instead of all china

[@bobrewer177]

They still manufacture some of there tools in the US but sadly the majority of their stuff in made in China

[@ernestogallegos6069]

Oh it’s coming. Just get use to made in the USA prices

[@akovic100]

I think a majority of their hand tools are made in Taiwan or USA.

[@bobevans6590]

Ernesto Gallegos if they make them here... we will pay for them here!

[@dxta7360]

@@bobrewer177 I just hope the qualities are same with those in the USA

[@jeffhurley3548]

I like it correct mr Dan not every tool is right for every job incredible and well priced product 😎👍

[@robertandreoli9764]

Clay looks like l am buying both sets of sockets 👍

[@tmbruno2539]

Want a bigger hammer? Can I have a bigger hammer? Hold my beer boy.

[@ron4america386]

PROTO has RBRT now, Dan needs a deep set of extractors

[@upnorth5465]

That's why I have the Gearwrench complete set to fill in the gaps because they have actual size and minus sizes in sae and metric.

[@CapeSIX]

yup the gearwrench set is great.

[@chrisperkins4728]

That's the set I've been looking at getting. Is it worth the money?

[@CapeSIX]

@@chrisperkins4728 yes but make sure you buy the mater set. part number is 84784 and its just under $200 on amazon. its nice because it has the normal size and then it has the same size but just a little smaller so u can get every rounded bolts off. Also it goes both ways so u can reuse them if they are uncommon bolts. overall im very happy with them.

[@upnorth5465]

@@chrisperkins4728 the 28 piece set I have works great. Has saved my ass quite a few times already. Well worth the 160 I paid for them. I like that they are 1/4" and 3/8 drive and impact rated as well.

[@anthonyortiviz3229]

My gear wrench set does that as well it has a negivitve 19 an 19 im impressed with my set im lookin into the 1/2 set who rebranded who on this one

[@311rooster]

I believe I need theses now

[@robertbowser1883]

Great video!

[@asmautollc]

The Irwin Hanson’s that Snap On rebrands have worked the best for me up here in the rust belt. Tried the Craftsman’s before that (the cheaper versions, not the Turbo Sockets), but they rounded out. Hanson’s are still going strong. I believe the Hanson’s are made from the same high carbon steel process they use on their taps. The only thing that would hold up better for extraction would be S2 tool steel, but that would be more expensive and well made high carbon steel will get a higher hardness than bolt material anyway.

[@truegrower658]

Rbrt foreign extactor set 8pc metric and the 5pc sae seem to be close to equivelent check the sizes out. Cant u just smack an extra tight metric on or a sae or vise versa?

[@ericluba6287]

So I am fairly new to the cool Truck World ive only gotten a couple of things from Snap-on think it's time to try some mac I really want the new Torx Master set they have but I did get the sonnax low profile 3/8 impact sockets are amazing

[@emiliog.4432]

When will Mac make rbrt 10mm 1/2”? They need a few more sizes. Excellent tools. Thanks

[@lambster4972]

i like those BAD BOYS

[@arthurbogar6137]

Good tools

[@etchosts8162]

Mr. Grab the right tool the first time!!!

[@irusvzi]

This is when you round it out more until you can fit the next size down 😂

[@emiliog.4432]

Sometimes you just have to weld a nut onto the rounded one. RBRTs are great but not the be all end all. What about drilling a hole and using the MAC RBRT FOD? Thanks

[@lawrencebarber1551]

I bet matco hex grip sockets would've got it!!

[@teebone5072]

Need those extractor sockets need to be 8 to 19mm. To get bolt out of the socket you switch the direction and it will release it

[@GrimmsAutoService]

good job you made him work for it you could see him sweat

[@robertzerafa4806]

I would of thought they would 9f given you those sockets to keep to use in the workshop and like that you can give an honest opinion of the tools under normal work loads and as a thank you for letting them use your show for very rewarding advertising for them. They should be fair to you.

[@KoonTrucking]

They did NOT give me a set of them

[@lonniewhite258]

The sockets and Mac ratchet are the only Mac tools used.

[@emiliog.4432]

Penetrating oil!! It does help. Molykote penetrating oil. The best. Works every time. Don’t the rbrts come in deep sockets? You can always cut off the extended threads when they’re too long and bottom out?

[@Tom-Travels]

I'm cryin' like a baby 'cuz I ain't got one of them socket sets. Sumbody put some bolts on with Maximum air tool violence. And now I'm screwed with rounded bolt heads.

[@carlitosspray1974]

I’m a Mac Tools distributor. Shoot me a message and I’m sure we can work something out.

[@georgeferlazzo7936]

Hello again Clay Thank you for another Great Video. I would like to know from your time with Dan. Did he say anything about having this RBRT in a 12 point socket version? As a Aircraft Mechanic, most of hardware I encountered is 12 point. And in SAE. Again thank you

[@KoonTrucking]

No I haven’t heard anything about it. Of course they want to keep things a secret until they are released to keep others from copying what they do and I respect that but Dan never talks about what is coming out next or anything like that.

[@georgeferlazzo7936]

Thank you again Clay, in short, I would not want you to break any confidence you have with Dan. I'm just a Mechanic looking for the best tool to work with!!! A part number and how much does it cost. I'm sure one must be in the works? Anyhow, thank you

[@cubenitup]

🤨 awesome

[@ricksmallen9620]

You can take a cut off wheel and grind the sides just a little and it would have taken the one nut loose...

[@wrenchtheroo6557]

You know those air hammer shanks that ends with a 1/2 or 3/8 drive? I bet you could drive those sockets home pretty easely

[@Buckuporbackoff]

Die grinder or file would’ve made it so the socket got a bite, sometimes even a chisel will reshape that bolt, if you absolutely had to get it out and make it so that socket could grab.

[@GrimmsAutoService]

I wonder how well they work in the rust belt when it comes out hard all the way plus some

[@1slkss]

High price tool fails where $10 pair of vice grips would have got that’s bolt out in 30 seconds flat...that’s funny!

[@patrickklos9704]

@5:25 Mac guy using a snap-on socket for demonstration 🤔

[@KoonTrucking]

Yep cause it was my socket…. Not his

[@timnewby115]

Looks like deep well is needed sometimes

[@ryanellinger103]

I can’t find theses on Mac website. Looked up part number and everywhere on the website.

[@chrisullrich2981]

When are these coming to the UK lol

[@ratrod3598]

Well you sold me a set lol

[@footlongburrito]

@koontrucking on the bolt that was the first and only that ive seen that it hasn't worked on, I would of welded a nut, maybe a washer then nut of the same size and then tried it, if it was for a real repair and not just as a extreme test, or that's when you try to bust out the knipex cobras and start wrenchin

[@brettwalkom948]

Twist socket may have got it too

[@footlongburrito]

@@brettwalkom948 if these didn't, I'm almost certain twist sockets wouldn't have, that head was at a very odd angle, and rbrt will grab pretty much everything, that was the only bolt head ive ever seen it not work on out of every demo ive seen, in person and every KZbin channel beside this one.

[@brettwalkom948]

@@footlongburrito dunno but if I was in that situation I'd definitely try it..

[@davidwalle5025]

good honest review, you had one failure. Was this all stuff that wally worked on . Was that a water pump from a cat? Bring Bret back more he is almost as good as wild bill.

[@brianreese9318]

Wish they were cheaper lol good tools I tell all about I’m on a farm at work as a mechanic and cow care taker

[@brianreese9318]

Thanks for all your likes 👍

[@JankyDubz19]

I believe you would have achieved in removing the tensioner bolt if you did not use the impact.

[@nolascoedwarden]

I wanna see how they compare to the gear wrench ones besides the pin to remove it’s the exact same

[@kevinchan6192]

That pulley with the extreme rounded bolt which the Mac tool failed. I want to see snap-on Friday to use the FDX socket to try to remove it. Let’s get snappy to get a chance to try.

[@KoonTrucking]

The FDX is the socket he had at the beginning of the video on his test block. It would not remove the bolt either. We tried it

[@DrFearCo]

I think you probably could have gotten the really gnarly one if it was cleaned up with a dremel or something. Or maybe if it was drilled and the other RBRT extractor was used.

[@devinmeints6791]

Do you have the part numbers for the new magnetic socket rails I seen them on my local truck but I changed jobs and no longer see a Mac guy and really liked them

[@patrickskaggs6034]

Hey clay why dont mac tools built a thin wall type brbt extractor socket that will help win there is not enought room

[@KoonTrucking]

No clue?

[@jenniferfreeman1752]

The tensioner has reversed tread.

[@harveysmith100]

Whooaa, you may have something there.

[@KoonTrucking]

No it doesn’t have reverse threads. It’s standard lefty Lucy, righty tighty..... you be wrong here. It’s a common failure on the 6.7 cummins we replace them all the time on Dodge ambulances.

[@harveysmith100]

@@KoonTrucking So it was just you being naughty Clay, bevelling the sides like that was a cruel trick! The poor man was sweating buckets!

[@rigobertogutierrez4130]

Definitely did not pass the test😞👎

[@fandango_buttlicks]

What I've done with bolts like that is smash the head of the bolt with a hammer flattening it down and then trying it again. Alot of the time it will take that taper out some giving it new metal to grab. Doesn't always work but that's what I would of done. It's already fucked and u can't fuck it more

[@larryborkstrom3580]

They need to come out with a deepwell so it won't bottom out

[@ryanridgely7807]

Was there thread lock on the belt tensioner idler? Those things are always tough.

[@KoonTrucking]

I’m sure it has some on it

[@20roseks]

I wish Mac would improve their website we don’t have a Mac guy in our area and waiting on the phone for over an hr I can’t do

[@jamesomahony1771]

God, I don't know what its like in the US, but over here in the UK their website is beyond dreadful, try locating your nearest MAC dealer, almost impossible. Then you ring them up to try and find out and it's the least helpful customer service you can imagine

[@20roseks]

Yes last time I called I tried to order a roll cart and the kept trying to refer me to one of their distributors over an hr away

[@bmk506]

Shoulda asked for a torch

[@carsandguitars7064]

Seeing that the bolt is trashed and the pulley is as well I would just weld a nut onto the destroyed bolt and put a wrench on it.

[@KoonTrucking]

Like I stated in the video this is an EXTREME case just to test the tools ability to remove stripped out rounded off bolts.

[@EdAtoZ]

Koon, Question the RBRT wrenches, is the opened end handed or directional ?

[@KoonTrucking]

They are no different in the open end than any other Mac wrench. Same style. The magic is the box end

[@spike757]

MAC R.B R.T guy using a Snap On 9/16 short socket to demo the block. I would think next time he brings MAC tools to complete his demo's

[@stevenjones1824]

Normally the bolts on the tensioner are left hand thread.

[@KoonTrucking]

Nope these are regular threads. We actually removed it after the video

[@AFatherToTheFatherless]

Where's the link

[@JavierHernandez-ih5zr]

Loved the curve ball... lol

[@lilchicago7550]

Will there be bigger sizes like 19mm-25mm for rounded lug nuts

[@xxbryan715xx]

Are these for sale yet. I can’t find them or a part number for them.

[@KoonTrucking]

Yes they have been since before the video was shot