Рет қаралды 274
Macbook 820-00840 dc jack desoldering & soldering correct way. Macbook repair experts in Hamilton New Zealand Call 078394111 or visit 125 ward street Hamilton New Zealand
Replacing the DC jack on a MacBook involves disassembling the laptop, desoldering the old DC jack, and soldering a new one in its place. Keep in mind that this process requires technical skills, precision, and the right tools. If you are not comfortable with electronics and soldering, it's recommended to seek professional help. Here's a general guide for the procedure:
Note: This information is for educational purposes only, and I am not responsible for any damage that may occur during the repair process. Proceed at your own risk.
Tools and Materials Needed:
Replacement DC jack.
Soldering iron and solder.
Desoldering wick or solder sucker.
Precision screwdrivers.
Opening tools.
ESD-safe workplace and wrist strap.
Steps:
Prepare Your Workspace:
Ensure you're working in an electrostatic discharge (ESD)-safe environment to prevent damage to electronic components.
Disconnect Power:
Power off your MacBook and unplug it.
Remove the Bottom Case:
Use a precision screwdriver to remove the screws on the bottom case of your MacBook.
Disconnect the Battery:
Locate the battery connector on the motherboard and disconnect it.
Identify the DC Jack:
Locate the DC jack on the motherboard. It's often near the power input area.
Desolder the Old DC Jack:
Use a soldering iron and desoldering wick or solder sucker to carefully remove the solder from the DC jack's connections on the motherboard.
Remove the Old DC Jack:
Once the solder is removed, gently lift and remove the old DC jack from the motherboard.
Clean the Pads:
Clean the solder pads on the motherboard using isopropyl alcohol and a brush.
Solder the New DC Jack:
Align the replacement DC jack with the solder pads on the motherboard and solder it in place. Be precise and avoid creating solder bridges between connections.
Inspect Your Work:
Examine the solder joints to ensure they are clean and free of defects. Check for any accidental solder bridges or cold solder joints.
Reassemble the MacBook:
Put the MacBook back together in the reverse order of disassembly.
Test the DC Jack:
Power on the MacBook and test the DC jack with the power adapter to ensure it is securely connected, and the MacBook is charging.
If you are not confident in your soldering skills or if you encounter difficulties during the process, it's strongly recommended to seek professional help. Additionally, be aware that attempting to repair your MacBook on your own may void any existing warranties.
We specialize in logic board and liquid damage repair and can fix your Laptop, MacBook, mobile phone , ipad, iphone , tablet , playstation, xbox or any other electronic gadget that has been deemed unfixable by another repair shop.
*Have a repair shop and are looking to outsource logic board repairs? We offer discounted repairs to other repair shops, schools, large organizations and government agencies. - applefix.co.nz...
logicboard repair course in New Zealand
Skill development Job Oriented short Training course. In Latest Gadgets, Smart Mobile Phones, Tablets, Laptops, Desktops, gaming gadget, Playstation, Xbox Repair Technology.
This course is aimed / focused, to teach you to fix most common repairs an electronics repair shop could face in a practical working environment. Start your own business or increase your chances to get job quickly. applefix.co.nz...
Mail in device info read here applefix.co.nz...