I had this problem i then put all the positive switches in parallel to pin 2, then all the negative switches in parallel to pin 3, then in the config i set all Pos switches to pin 2 and all neg and home switches to pin 3, works like a dream
@bransonlariscy466010 ай бұрын
I have all my limits going to a different input for each
@bransonlariscy466010 ай бұрын
I think you are confusing your zed axis with x axis. The zed moves your touch above and down to the table. You might have need to change ports and pins to fix this. Because I seen your Z move but you called it your x
@bobheadzeek2 жыл бұрын
You can't have all the limit switches on the same pins / ports.
@xyzspec82 Жыл бұрын
Yes you can
@pmsilvei3 жыл бұрын
I am getting the same exact problem with my machine. How did you make it work? I don't want to use another input pin just for the X axis homing 😏🙄
@scott27353 жыл бұрын
I still haven't figured it out but it's not a huge problem so doesn't bother me to much. If you manage to figure it out could you let me know how 👍. I might even go back and take another look myself
@pmsilvei3 жыл бұрын
@@scott2735 yes bro, I solved after posting my question 😅😁 Just go to Mach3 top menu and do this: 1- Click Operator 2- Click Edit Button Script 3- Click Ref All button 4- Edit the script, and put the last line of code in second place (this will put X homing in second place on the sequence, right after Z) 5- Click close window 6- Click YES to save changes to the button script 7- Smile Tell me if it worked for you too M8! Ehehh
@pmsilvei3 жыл бұрын
@@scott2735 This is what helped me out. It doesn't refer to the exact problem, but it showed me the way 😅😁 kzbin.info/www/bejne/rXKyg4d8g7WDmsU
@scott27353 жыл бұрын
@@pmsilvei 🙌 yes!! Thanks got it working now. Mine was slightly different than yours think it was second from bottom on the script but still the same thing overall. Thanks 👊